After having revoked public UTL_FILE, found the problem...

Similar Questions

• When I tried to import pictures from my camcorder videos seem to be import of Strontium.  After finished importing is not found the videos at all.  Any ideas?

  When I tried to import pictures from my camcorder videos seem to be importing into "Strontium".  After finished importing is not found the videos at all.  Any ideas?

  What is "strontium"?

  There are 9 different versions of iPhoto and they run on 10 different versions of the operating system. Tips and tricks for dealing with issues vary depending on the version of iPhoto and the version of the operating system. In order to get help, you need to give as much information as possible. Include things like:

  -What version of iPhoto.

  -What version of the operating system.

  -Details. Full, a description of the problem as you can. For example, if you have a problem with export, then explain by describing how you try to export and so on.

  -History: Is it going hard? Everything has been installed or removed? -Are there any error messages?

  -Have what measures you already tried to solve the problem.

  -Something unusual on configure your? Or how you use iPhoto?

  Anything else you can think of that could help someone understand the problem you have.

• Must the updates and hot fixs remain on the hard drive after having been loaded? Is the information provided in the operating system?

  Must the updates and hot fixs remain on the hard drive after having been loaded?  Is the information provided in the operating system? Or do the lonely stand.

  Original title: need for disk space

  Here are the official specifications of Toshiba for your PC...

  http://support.Toshiba.com/support/staticContentDetail?ContentId=638405&isFromTOCLink=false

  All interface PATA (IDE) connectors are a standard 40 pin.

  I know that there is no restriction on the mixture of ATA drives with different speed capabilities and no restrictions on what cable you use, whether 40 wire or 80 strand (but still 40 pins).

  Faster drives will only work at the speed of the slowest car on any cable and 80 strand cables are needed to make ATA66 or higher drives run at their native speed.

  In addition, no player can work faster than the motherboard chipset permits, in your case ATA66.

  My provider of trade has still some disks 3.5 '' PATA in stock, but these are becoming harder and harder to find. Indeed, it is possible that production has ceased and that suppliers are just exhausted stocks.

  I can certainly say that, when repairs this technology were more frequent, I never had problems with discs theoretically faster on the same cable as slower drives, nor by using faster on 40 cable strands discs. In fact, of many penny pinching manufacturers (some of them major) regularly used for the optical drive and hard drive on the same cable as the motherboard has two connectors, resulting in a decrease in performance on the disk hard (although most of the people would not have noticed the difference). Sometimes, the cable would be 40 strand (understandable if you are penny pinching) and sometimes the cable would be 80 strand (laughable if you are penny pinching because they are [were] more expensive).

  Pass your question about vacant below the sound card. Unless your text confused me, this space is for expansion cards no disk drives. Space that you reference is probably to the back of the PC. Hard drives are normally located toward the front of the dedicated PC "berries". Unfortunately, I could find no photo on the Toshiba site, and still less those internal.

  Tricky

• Flash Player 11.3.300.262 works only with Firefox. I think I found the problem.

  * Flash Player 11.3.300.262 does not work with Firefox. I think I found the problem.*

  Millions of people got off work & turned on there computers recently to discover that Firefox isn't playing videos or flash content. Like me, millions of people are randomly searching the Internet in an attempt futile and frustrating response. Unfortunately, many of these people will simply stop using firefox & consider a browser glitch, unreliable.

  This happened to me a few days ago. I started my computer and got a pop-up from Adobe saying that I need to update my flash 11.3.300.262 drive. I always thought that Adobe as being a reliable software company, so I clicked on it with confidence that things will take care even more fluid. To my horror, I have relalized that just after the update, my main browser, firefox has been destroyed. Then I went on the frustrating process of uninstalling, reinstalling, running virus scan, search the Internet like a lost child. I thought, "this is why I hate the update of things, because the updates always seem to change things you don't want to change, and there always seems to be a problem with updates." I generally update software month after release, because microsoft & all other software vendors always seem to not test it stuff properly before releasing. We must look a glitchy computer until the next update fixes it. Well, that is my rant. Now, let me discuss the problem I found.

  Problem:

  What I did, go to my menu firefox extensions, I disabled the 11.3.300.262 & I have reactivated the previous flash player. After that, everything worked perfectly again. Then one today (a week later), I turned on my computer and my firefox wasn't playing videos or flash content again. I went into my menu parts of firefox again, and I discovered that my old flash drive has been removed & this 11.3.300.262 new glitch had been activated. Why adobe feel the need of in my computer & automatically delete and update my flash drive. Now, it does not work. It IS REALLY FRUSTRATING!

  The question that I discovered:

  "RealPlayer" is the most popular video show & it's installed on millions of computers. For some strange reason Firefox doesn't want its users to use Real Player. Specifically the RealPlayer Record Plugin 15.0.2. I also discovered that my Plugin 15.0.2 Record of the browser has been disabled automatically when the Adobe 11.3.300.262 is automatically updated too.

  -Maybe this could be because of some conspiracy of copyright law to stop people from downloading videos from the web.

  -Maybe firefox wants people to use it download add-on instead of RealPlayer downloader.

  I don't know what ther reason. But what I know is no one will remove it RealPlayer to computer there is just to use FireFox. We can just use Chrome or Internet explorer. I took advice of people with disabilities the Extention of RealPlayer, FireFox and Adobe. I also went in my RealPlayer preferences options, but there is no option to disable the download of FireFox for registration. BECAUSE I have ALREADY DISABLED THE add-on menu FireFoxes.

  Solution:

  Step 1: Adobe needs to update all computers with the previous flash player. In this way we can choose to activate the previous flash player in our FireFox. or wait for a new update fixes the problem with firefox.

  Step 2: Adobe & FireFox need to get together and go back to the drawing board. They need create an update that actually works on computers with of Real Player installed on them. I don't like that the company made the update. All I care about is if it works. Thank you.

  Oh yes, Im market FireFox 13.0.1, Windows 7, computer HP, Real Player is up-to-date.

  FirefoxAdobeNotWorking wrote:

  We all that business leaders like every penny of profit and there ready to layoff anyone to keep this benefit. Suffice to say.

  Mozilla is a not-for-profit organization, and Adobe will not loose anything if you switch to chrome or IE.

• Windows crashes software when it cannot verify the Publisher * found the problem

  * Found the problem, thank you anyway

  I use Windows XP and IE8, and I am trying to allow the installation of ActiveX controls.

  I get the following warning of safety and error: "Windows has blocked this software because it can't verify the Publisher.

  To protect your computer, Windows crashes software when it cannot verify the Publisher. »

  I have read a dozen forums and tried all the tips. I don't know what I'm doing wrong.

  I tried going into the tools of IE tab and changing the security options to "allow software to run or install even if the signature is not valid.

  I unchecked the boxes to "verify signatures.

  I passed the security settings and select: fast for "Unsigned download Active X controls" and: ask the user 'initialize and script ActiveX controls not marked as secure..'  and 'activate' to 'run ActiveX controls '.

  I even added the IP domain in my zone of confidence and lowered my security level to 'low '.

  I also remembered to close and restart IE.

  I always get the error message when you try to leave the site to install ActiveX. controls.  FYI the ActiveX is remote viewing of a security camera.

  If anyone has any other clues that could help me with this problem I would be very grateful.

  Fancy

  Thanks James, but I found the problem.  There was an extra box that I neglected to "verify" that allowed to install unsigned files.  I thought I had checked and unchecked everything related but I missed a.  Scary lengths windows go to protect me! :)

  Fancy

• When I connect to the internet, servads pop up. I ran malwarebytes anti malwalre and microsoft security analysis. Not found the problem of servads in their analyses.

  When I connect to the internet, servads pop up.  I ran malwarebytes anti malwalre and microsoft security analysis.  Not found the problem of servads in their analyses.  How can I get rid of the servads.

  Hello

  1. what web browser do you use?

  2 have had any changes made to the computer before the show?

  If you use Internet Explorer, please follow the methods.

  Method 1:

  If you see pop-ups suspicious, bars unwanted tools, redirects, strange results or other unexpected behavior on your computer, you may have been deceived by installing malicious software (also known as 'malware') on your computer. This behavior is known as the browser hijacking.

  To correct your hijacked browser I suggest to follow the steps outlined in the article below and check if it helps to solve the problem:

  http://www.Microsoft.com/security/spyware/browserhijacking.aspx

  Method 2:

  Step 1:

  Start the computer in safe mode with network and perform antivirus analysis.

  See the link.

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Step 2:

  Perform an online virus scan.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

  Method 3:

  Follow the steps in the link.

  http://Windows.Microsoft.com/en-NZ/Windows7/Internet-Explorer-pop-up-Blocker-frequently-asked-questions

  Method 4:

  optimize Internet Explorer and check.

  NOTE: The Reset Internet Explorer Settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  http://support.Microsoft.com/kb/936213/ro

• After asking a question, I found the answer myself. How to mark it as "answered"?

  There is a button to press if someone else answers the question, but not if I find a solution myself.

  I believe that if you reply to your post that the problem is solved, the moderator of the forum will come along after a week or two and mark responded.

  Good luck

• Can't access "set your default programs." This discovered after having been unable to open the links on the web page of in posts emails?

  Tried to follow the online help to reset Internet Explorer and Outlook as default programs on my wife's computer. Cannot open "Set your default programs" we discovered the problem after being unable to open internet links in emails.

  This gives a test for the issue of the link.

  For hyperlinks does not, see below

  http://support.Microsoft.com/default.aspx?scid=kb;en-us;310049

  I hope this helps.

• Keep saying Appcrash after installation. How to solve the problem? Thank you

  I installed Adobe Acrobat DC via Adobe Creative Cloud, but he repeats me Appcrash once I open it. I can't open it for more than a minute.

  Do you know what is the problem and how to solve?

  Thank you.

  Hi Lelez10545194,

  Please refer,

  Adobe Creative Cloud desktop application closes immediately after launch

  Solve intermittent crashes Acrobat DC on Windows OS

  Resolve Windows system errors, freezes | Adobe software

  Let us know if that helps.

• Connection problem - always after that Adobe would have solved the problem

  My Adobe Creative Cloud Desktop App does not allow me to connect. I CAN sign using a browser and go directly to the web page of creative cloud, so this isn't an ID or problem of password as the desktop application maintains reports.

  I uninstalled and reinstalled Adobe Creative Cloud Desktop App - which did not

  I have reset my password several times and it works for access to web pages, but not access Adobe Creative Cloud Desktop App.

  All this is AFTER Adobe claims to have fixed the sign on the problem (May 16, 2014 09:00 Pacific time).

  How do I get the Adobe Creative Cloud Desktop App works as it did for months without any problem?

  This fixes it is no longer connected in your Creative Cloud applications

• Window marker empties after having placed In/Out in the clip of MC (CC)

  (First Pro CC on OSX 10.8.5)

  We have interviews turned on three cameras. We synchronized all three using point and realized a multicamera clip uses ' make the camera sequence multiple source.»

  We then placed markers on clips of MC and places text (with periods) using the markers window.

  So far so good.

  The problem then arises. When I place an In or Out point on the MC Clip, markers and text disappear from the markers window. The only way I can get them to show once again to the top is by clicking on the Source window. Then, as soon as I have another place or point, they disappear again.

  WTF?

  I found a solution: disable the multicam sequence in the project Panel, before working with him in the Source monitor. More explicitly:

  1. Load the multicam sequence in the Source lun.
  2. In the project Panel, click any element of the project other than the multicam sequence that is then loaded into the Source of LUN.
  3. In LUN Source, work with markers and In/Out points to your heart's content.

• Sign after having upgraded to webworks 2.0 problem

  Here's my problem:

  I tested and signed my "Emoji" app and now trying to download on blackberry world, but this was rejected due to a different package-ID

  my new config.xml is:

  http://www.w3.org/ns/widgets ".
  xmlns:CDV ="http://cordova.apache.org/ns/1.0" > "

  ....

  and my old config.xml:

  
  http://www.w3.org/ns/widgets ".
  ' xmlns:RIM ='http://www.blackberry.com/ns/widgets '
  version = "1.0.3.3" id = "emoji" >

  ...

  You can see that the parameters 2 IDs are the same.

  BUT!

  When built in release mode, I got this manifesto. MF file:

  Package name: emoji
  Package-Id: gYABgJSuBKzV0sdItE9Yz4yhs

  and the older generation is:

  Package name: emoji

  Package-Id: gYABgLXdKS-gRXFiK_zGEPk3Q

  It changes!

  Please help me with this, thanks!

  Edit:

  I think that maybe the problem is because I went to sign with blackberryid?

  WebWorks 2.0 requires blackberryid, right?

  which is not supported in webworks 1.0, right?

  As you know WebWorks 2.0 uses the new code based on the method signature chips, that is associated with your account BBID.

  To keep the same values (between an old and new generation) package id in your application MANIFEST. MF file, you must link your old code with the new token signing key. That way the signature Server recognizes your signature and apply to the right pair for the compiled file BAR.  This is done using the following cli command:

  https://developer.BlackBerry.com/native/documentation/core/com.QNX.doc.native_sdk.DevGuide/com.QNX.d...

  More:

  http://devBlog.BlackBerry.com/2013/08/code-signing-keys-be-gone-welcome-BlackBerry-ID/

• After having migrated to HPConnected Central ePrint problems with the print files sent to the email

  HP has done once again huge confusion with the replacement of her service "eprint" to "HP connected". There is a reasonable need to do? In any case, after the migration, I noticed several problems:

  1 PDF document, less than 5 MB, sent to the e-mail address of the printer is not printed. I noticed with a type of a PDF file that I receive from my Bank. Other PDF files are printed, sent by e-mail also. Any reference to what should be the reason of not print these PDF files?

  I want to point out that the these PDF files, I'm referring to not print is printed with success if I print them since my network where the printer and not printed via eprint option in sending the file to the email address of the printer. When using old HP ePrint service, I was able to print PDF files sent by e-mail.

  I get "system error, try again"! for the file itself and email body is printed correctly.

  

  2. in the use of HP eprint service, I used to receive the confirmation email after sending files by e-mail for printing. Now, this is not possible. Read about it on the forum I learned that this option is not available any more, after the migration to "HP connected". In this topic was given the opportunity to connect to connected HP and see if the file is printed or not. If HP has ruined their functionality for lets say more easy way to know if my files are printed or not. If I'm in a hurry and I send and send any phone to my printer, I will not receive any confirmation e-mail (with easy and speed) but I need to plug on HP connect... blah blah blah.

  That is why I ask if there is possibility of RETURN migration to eprint, old and not fancy but functional HP ePrint service?

  Used printer:

  HP p1102w CE658A, with the latest firmware, with operating system on Windows 7 computers (64)

  and always gon no response on email sent to support.

  Its easy to find!

  Product HP take or leave as it is.

  I leave!

• OpenOffice org - DUPLICATED PROGRAMS after HAVING updated... THE OLD VERSION CAN BE DELETED?

  Original title: a COPY of the PROGRAMS AFTER UPDATE... THE OLD VERSION CAN BE DELETED?

  THE INTERNET WILL NOT OPEN THE PAGES OF THE SAME BROWSER CONNECTED TO THE INTERNET, SOMETIMES?

  AFTER THE UPDATE OF SOME PROGRAMS DISPLAYS COMPLETE (2) DIFFERENT VERSIONS INSTALLED ON THE COMPUTER... THE TWO MUST BE KEPT OR CAN I DELETE THE OLDER VERSION WITHOUT CAUSING PROBLEMS WITH THE NEW VERSION?

  OOo_3.2.1_Win_x86_install_en - US.exe:

  I USE THIS PROGRAM TO READ AND OPEN THE FILES DOC WORD, CAUSE MY WORD IS MESSED UP IN LAW AND IT DOES THE JOB BUT I THINK HE COULD START TO CAUSE CONFLICTS AND PROBLEMS... IF I COULD GET ANY INFO ON THIS PROGRAM, I WOULD BE VERY GREATFUL

  Hello

  
  What browser do you use?
  
  If you use internet explore then try optimizing and check for the issue.
  Reference: http://support.microsoft.com/kb/936213
  Usually we recommend that you use the latest version because it would include all later versions and patches for it. Uninstall the old version would not cause any problem.
  Uninstall the old version refer section below.
  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program
  You can also try to contact the manufacturer for assistance.
  http://support.OpenOffice.org/
  http://www.OpenOffice.org/contact.html

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• After that cc 2015 effects make the problem

  I can't make videos: after I exported the composition to the render queue, change the settings and click "Render" it will make only the first image. All solutions?

  It is impossible to say what is happening without knowing the details of your model, including the type of film used, what you've done for layers and details of your workflow. We also know exactly what you did to 'change' the settings in the render settings or output Module. If rendering fails what the rendered example journal? If you get an error message that say what?

  For a new user the most likely problem is that you have set the work area to 1 frame or you have added some sort of effect that causes rendering to fail.