Window marker empties after having placed In/Out in the clip of MC (CC)

(First Pro CC on OSX 10.8.5)

We have interviews turned on three cameras. We synchronized all three using point and realized a multicamera clip uses ' make the camera sequence multiple source.»

We then placed markers on clips of MC and places text (with periods) using the markers window.

So far so good.

The problem then arises. When I place an In or Out point on the MC Clip, markers and text disappear from the markers window. The only way I can get them to show once again to the top is by clicking on the Source window. Then, as soon as I have another place or point, they disappear again.

WTF?

I found a solution: disable the multicam sequence in the project Panel, before working with him in the Source monitor. More explicitly:

  1. Load the multicam sequence in the Source lun.
  2. In the project Panel, click any element of the project other than the multicam sequence that is then loaded into the Source of LUN.
  3. In LUN Source, work with markers and In/Out points to your heart's content.

Tags: Premiere

Similar Questions

  • Must the updates and hot fixs remain on the hard drive after having been loaded? Is the information provided in the operating system?

    Must the updates and hot fixs remain on the hard drive after having been loaded?  Is the information provided in the operating system? Or do the lonely stand.

    Original title: need for disk space

    Here are the official specifications of Toshiba for your PC...

    http://support.Toshiba.com/support/staticContentDetail?ContentId=638405&isFromTOCLink=false

    All interface PATA (IDE) connectors are a standard 40 pin.

    I know that there is no restriction on the mixture of ATA drives with different speed capabilities and no restrictions on what cable you use, whether 40 wire or 80 strand (but still 40 pins).

    Faster drives will only work at the speed of the slowest car on any cable and 80 strand cables are needed to make ATA66 or higher drives run at their native speed.

    In addition, no player can work faster than the motherboard chipset permits, in your case ATA66.

    My provider of trade has still some disks 3.5 '' PATA in stock, but these are becoming harder and harder to find. Indeed, it is possible that production has ceased and that suppliers are just exhausted stocks.

    I can certainly say that, when repairs this technology were more frequent, I never had problems with discs theoretically faster on the same cable as slower drives, nor by using faster on 40 cable strands discs. In fact, of many penny pinching manufacturers (some of them major) regularly used for the optical drive and hard drive on the same cable as the motherboard has two connectors, resulting in a decrease in performance on the disk hard (although most of the people would not have noticed the difference). Sometimes, the cable would be 40 strand (understandable if you are penny pinching) and sometimes the cable would be 80 strand (laughable if you are penny pinching because they are [were] more expensive).

    Pass your question about vacant below the sound card. Unless your text confused me, this space is for expansion cards no disk drives. Space that you reference is probably to the back of the PC. Hard drives are normally located toward the front of the dedicated PC "berries". Unfortunately, I could find no photo on the Toshiba site, and still less those internal.

    Tricky

  • Unable to turn on the window Defender, even after that I click on activate the defender of the window. THA page with the tool does not appear...

    Unable to turn on the window Defender, even after that I click on activate the defender of the window on my window vista home premium... The page with the tool does not appear...

    If you have
    one of the following AV, antivirus, programs installed, it will stop your
    Windows Defender. Purpose of these AVs have their own advocates. 2 defenders
    on the same machine will create conflicts.
    Bottom line: it's ok.
    It's normal.
    List of AVs which will stop Windows Defender

    Norton
    McAfee
    AVG
    Microsoft Security
    Essentials

    If you do not have the
    above AV programs, here's how to do to restart Windows Defender:

    Start button > in the search box, type Services > press the Enter key > scroll to find Windows Defender, click on it >...
    topic status , it must be said... Has begun
    under Startup Type, it must be said... Automatic
    If it does not say that, right click on Windows
    Defender > click Properties > to
    Startup type, click on the pointer to the right and select automatic
    to the service status, click Start
    Click OK when finished.

  • Restore Windows live mail - after having downloaded Windows Essentials

    My emails disappeared after the download Windows Essentials and restore then return to the previous Windows Live Mail.

    Can help you to recover/restore mails?

    Hi AlanBarrick,

    The question you have posted is better suited to the support of Windows Live Mail. I recommend you ask your question to the Windows Live Mail support for assistance.

    Hope the helps of information.

  • Try to delete junk mail in my account hotmail with windows 8 and after having clicked on delete and it comes right off. Does anyone know how to remove it?

    Try to delete junk e-mail with my account hotmail with windows 8, and after clicking on remove the spam is well again. If I go to my email using the icon on the desktop I am able to remove everything. It is only with the icon of mail on the splash screen that I can't remove. Does anyone know hot to delete?

    Hello

    I'm happy to help you with your concern about the removal of junk e-mail.

    Please clarify your statement "it is only with the icon of mail on the splash screen that I can't remove.

    Are you referring to a Mail or Windows Live Mail application?

    We look forward to your response.

    Thank you

  • to set shortcut key in and out of the clip?

    Hello, I am new in preview, using Premiere Pro CS4 4.2.1 v..  I wonder if there is a shortcut for something.  In the timeline window I have the video layer I selected, the indicator is on the clip selected and I want just first to set automatically the points based on the length of this clip and output.  So that I don't have to go at the beginning of the clip, developed, go statements point, at the end of the clip, and then realize my editing.  Is it an option you know?  or I'll stop crying and just run the four additional steps?

    Thanks for the help!

    Sincerely,

    NAP

    Use the forward slash key: marker | Set the sequence brand | Inside and out around selection.

    -Jeff

  • Why my printer more hp 8600 spit an extra page (empty) after having printed a single page?

    I use a HP Officejet Pro 8600 Plus on a HP Pavilion HPE computer running 64-bit Windows 7. He did since I started to use the new printer there is ten days.

    Y at - it a fix for this problem?

    I found something that seems to work.  At the end of this process, you will be asked to restart your computer, so probably best to do when you are not in delays and/or with several programs.

    You need the HP Jet Pro 8600 for this Officce installation disc.   Insert the disk into your CD/DVD/BlueRay player and be sure that it is active.

    Then go to control panel > programs and features.  Search for "Software device HP Officejet Pro 8600Basic".   Do a RIGHT CLICK on the program.  Appears in a context menu for the uninstall, change or repair.  Left click on "fix."  The program took about 5 seconds on my K-3770.

    After the repair the program runs it asks to restart the computer for the changes to take effect, now or later.

    I tried the repair by printing multiple Word 2010 files which had been printing an extra 10 seconds after page started printing.  I have tested as print current Page, print selection, print, print all extended Custom Pages.  It seems to have solved the problem.

    I hope this helps everyone.

    HP-why this feature isn't VERY accessible?  I fell on it, when I was trying everything and anything to correct this proglem.   I'm sure it's buried somewhere in the documentation, but I ran into it.

  • Establishment of an iPad after having been locked out but did not recall what is my Apple ID or password.

    Basically, I'm trying to help my sister in law with his iPad. She had initially forgotten its password to enter his iPad and if she got locked out. I googled how to reset and so I have connected the iPad to a laptop and went through iTunes (without signature). Now that the iPad has been swept clean it is now the scene of reactivating...

    I typed in the country, wifi etc and now he asks the Apple ID and password that was used to set up the iPad initially that she can't remember. She does not know what email address she used and she forgot her password. I searched for centuries now what can someone help!

    Is still connected to the account anywhere so that she can get him? Or she has none of the downloads of the account in the computer's iTunes library so that it can do "get info" on them and see the id? If not already tried it: If you have forgotten your Apple - Apple Support ID ?

    If she can still find, and she was the original purchaser of the iPad (i.e. he not was purchased used), she might try to go to an Apple Store (it should take an appointment-Genius Bar if she does) or try to contact iTunes Support Online (https://www.apple.com/emea/support/itunes/contact.html) and see if they can remove the iPad on the account - they are likely to want to see proof of ownership before they could help for example an original receipt with the serial number above

  • The browser window is empty after installation, no button or the view menu. Homepage is just a black background. What has gone wrong?

    Just upgraded to Firefox 33. Using Windows 7 Enterprise, 32-bit edition.

    Found answer to my problem in the thread here:
    https://support.Mozilla.org/en-us/questions/1025438

  • I lost my WiFi signal after having placed a time Capsule in the system. Now the Airport Extreme will not recognize the system. Any ideas?

    Any ideas on why my Airport Extreme will not recognize the system after the integration of the time Capsule in my system? Continues to have a flashing yellow light after trying all suggestions of technicians from the Apple Store and Internet provider.

    Since we don't know all what has been tried, we will have to start from the beginning if you don't mind.

    What exact models are your AirPort Extreme and Time Capsule? What is the brand and model of your modem Internet? I'll assume that Extreme is your "main" router and is directly connected to the modem by Ethernet... correct?

    Do you have the Time Capsule (TC) connected to the extreme, by wire or wireless? What is your goal for the TC? In other words, will not be used to extend the reach of the extreme wireless?

  • among the files ive tried to play will not work, it says that I have to use windows media player after I tried to play through the win media player it came with an error C00D1099 im codex using the vista___ error code is C00D1099 can u please help

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Ideas:

    • You have problems with programs
    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    Hello

    Follow these steps to remove corruption and missing/damaged file system repair or replacement.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    =================================

    After the above, you need Codec - get these if 32 bit Vista.

    -Free - CCCP also get free tool of insurgents
    http://CCCP-project.NET/

    FFDSHOW - free
    http://sourceforge.NET/projects/ffdshow/

    Check here:

    Plug-ins for Windows Media Player
    http://www.Microsoft.com/windows/windowsmedia/player/plugins.aspx

    ---------------------------------------

    VLC needs, of no use so usually Codec as a backup when asked to support associations of files just say no.

    VLC - free
    http://www.videolan.org/VLC/

    -------------------------------------------------------------

    If 64 bits and you need codec.

    Read this 1st and go that route, or use the one below.

    http://www.Vistax64.com/sound-audio/152850-Vista-codec-pack-32bit-64bit-Media-Player-codecs.html

    --------------------------------------------------------------------

    If 64-bit Vista - can run WMP in 32 or 64 bit mode.

    Or try these: download - SAVE - go to the place where your put them RIGHT CLICK – RUN AS ADMIN.

    For 32-bit use these - OR those listed above that I prefer.

    K - Lite Codec Pack 5.0.5 & K-Lite Codec Pack 5.0.5 update
    http://www.codecguide.com/

    Use them for 64-bit:

    K - Lite Codec Pack (64-bit) 2.6.0
    http://www.codecguide.com/

    -------------------------------------------------------------
    You know that you use WMP 32 or 64

    Change, change or set 64 - Bit Windows Media Player 11 (WMP11) in Windows Vista x 64 as default
    http://www.mydigitallife.info/2007/01/19/switch-change-or-set-64-bit-Windows-Media-Player-11-WMP11-in-Windows-Vista-x64-as-default/

    -------------------------------------------------------------

    And you can use it when necessary because no codex is usually required.

    VideoLAN - VLC media player
    http://www.videolan.org/

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • OpenOffice org - DUPLICATED PROGRAMS after HAVING updated... THE OLD VERSION CAN BE DELETED?

    Original title: a COPY of the PROGRAMS AFTER UPDATE... THE OLD VERSION CAN BE DELETED?

    THE INTERNET WILL NOT OPEN THE PAGES OF THE SAME BROWSER CONNECTED TO THE INTERNET, SOMETIMES?

    AFTER THE UPDATE OF SOME PROGRAMS DISPLAYS COMPLETE (2) DIFFERENT VERSIONS INSTALLED ON THE COMPUTER... THE TWO MUST BE KEPT OR CAN I DELETE THE OLDER VERSION WITHOUT CAUSING PROBLEMS WITH THE NEW VERSION?

    OOo_3.2.1_Win_x86_install_en - US.exe:

    I USE THIS PROGRAM TO READ AND OPEN THE FILES DOC WORD, CAUSE MY WORD IS MESSED UP IN LAW AND IT DOES THE JOB BUT I THINK HE COULD START TO CAUSE CONFLICTS AND PROBLEMS... IF I COULD GET ANY INFO ON THIS PROGRAM, I WOULD BE VERY GREATFUL

    Hello


    What browser do you use?

    If you use internet explore then try optimizing and check for the issue.
    Reference: http://support.microsoft.com/kb/936213
    Usually we recommend that you use the latest version because it would include all later versions and patches for it. Uninstall the old version would not cause any problem.
    You can also try to contact the manufacturer for assistance.
    http://support.OpenOffice.org/
    http://www.OpenOffice.org/contact.html

    Thanks and greetings
    Umesh P - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

  • HP Pavilion 15 t: how to avoid the login password after having powered down and restart the next day

    After the upgrade to Windows 8.1, I have to enter my password, if I click on the 'Rainbow' at RPM screen and moving toward my office after I shut down and restart by pressing the power switch.

    However, if I click on the power icon and select [Restart], the rebstarts 15 t on the desktop (I want!).

    I ran "netplwiz" and all options offered, but none of them ignore the display of password to the power on - so frustrating!

    H-E-L-P

    BobO'B

    Hello

    Hope the following video helps:

    https://www.YouTube.com/watch?v=-VOlZl7UmwQ

    Kind regards.

  • one of the files ive tried to play will not work it says I have to use windows media player after I tried to play through the player it came with an error in vista using the codecs__ error code is C00D1099 can u please help

    problem with playing a video file in windows media player, it says that I have to play through windows

    an answer another threadhttp://social.answers.microsoft.com/Forums/en-US/vistapictures/thread/5279a870-4f85-496b-a9d2-957236f9ab0d
    Rob - bicycle - Mark Twain said it is good.

  • The message "this connection is untrusted" yet once after having selected, option "I understand the risks", that is not reappear as an option

    I get these messages to Hotmail.com even, as well as the mozilla Web site. In fact, I'm on Chrome now for the first time because this is a new issue and I don't know why all of a sudden what happened. Added exceptions, I always get the message. This is not the common THREAD issue because these aren't executives as described in the other responses to this problem. I have RESET FIREFOX and although it's getting a little further with HOTMAIL.COM screen now remains empty. Support MOZILLA page is caught in the trap in an older format and not in its State Advanced. I also deleted the cert8.db file that was not working. the error message on the page is the same sec.error.issuer. I am also using Avira antivirus personal free and tried to uninstall and reinstall as it seemed to have a few features missing, but to no avail. I don't know how to disable parsing of SSL with AVIRA even though I looked briefly online. Not sure where from here, but to suffer with an old install of Firefox which does not allow me to view videos from youtube etc.

    OK, unfortunately the transmitter of fiddler2.com in the certificates could be a sign of unwanted software on your pc that is to intercept the secure network traffic. go to the system control panel and uninstall programs such as BrowserSafeguard, BrowserSafe, backup or other software that seems suspicious and did not get intentionally installed by you.
    Reference: https://support.mozilla.org/en-US/questions/982532#answer-520145

    afterwards, run a full scan of your system with security tools like the free version of malwarebytes & adwcleaner.

Maybe you are looking for

  • Apple HFS + Windows drivers

    Help! Apple HFS + Driver Windows does not work in the new update anniversary 10 Windows

  • error code: ssl_error_rx_malformed_alert

    I have a reocurring problem that happens in a seemingly random interval. Sometimes in a span of several hours, I'm banned from all sites https, to a few sites it showes (erros code: ssl_error_rx_malformed_alert). I have searched the alert but have no

  • OfficeJet 6500 a Plus: clear the call history

    I would like to know how celar to the call history please. I deleted the history of fax and restored factory settings (settings > tools >) but on start-up again calls on any phone numbers history is still there.

  • iPad: HP iPrint photo not found on the iTunes App Store

    A HP Web site tells me to use the iPhone App store to download HP iPrint Photo on my iPad.  No results in search for this product on the App Store.  I don't want ePrint, I want iPrint, scan directly to iPad and iPhone. Thank you. Janet

  • To install and uninstall crash, series B9100 and C8100, module msvcrt.dll

    After a successful installation of the all-in - one Photosmart C8180 I tried, months later, to install a Photosmart B9180 printer. A minute after the installation starts, the installation stops with an indication of the accident: The HP Installer Opt