After installing the latest acrobat on my iPad, I can't comment on the PDF file (it automatically closes when I try to save)

Similar Questions

• Receive the error code: 0 x 0070017 when I try to save it on a Vista 32 bit.

  Original title: I get the error code 0 x 0070017 when I try to save it on a Vista 32 bit. I tried disk repair & restoration. does not work. any help appreciated, Doug

  Recently, I have code failure error 0 x 0070017 when I save.   Using the error checking & repair disk hard does not help, nor restores at the earliest.  I tried the restore dates & get restore disk failed. All the disks are clean virus according to Norton 360.   This computer running Vista 32 bit.

  Any help is appreciated... Doug

  Hi Doug,.

  1. What is the full error message that you receive?

  2. are you trying to backup to an external drive?

  3. you have any third-party backup program installed on the system?

  4. have you made a recent software or hardware changes to the system?

  I'm sorry to know that you are always faced with the question after performing a restore of system and control of disk. However, you can try the following steps and check if it helps:

  Method 1:

  You can try to change the backup location and see if it helps.

  For more information, see the article:

  Change when you save your files

  Method 2:

  You can temporarily disable antivirus software and firewall on the computer as a test and check if it makes a difference.

  If disabling the antivirus/firewall resolves the issue, you may need to configure the settings of the antivirus/firewall accordingly. Please contact the software vendor for assistance in this regard.

  Note: Make sure that you enable the antivirus software and firewall after the test.

  Please post back and let us know if the steps helps to solve the problem.

• The last update of Photoshop crashes when you try to save! and then there is not a version retrieved!

  The last update of Photoshop crashes when you try to save! and then there is not a version retrieved!

  How to bring back the old version. It's HORRIBLE! I lose all my work.

  Frustrated is not even close to what I am.

  If none of the troubleshooting routines have led to a positive result?

  Or have you been able to re - install one of the older versions?

• Hi, I'm in total panic. I have daughter an Acrpobat PDF reader for 8 hours - suddenly when I closed the pdf it didn't close properly by asking to save what was written and I've lost 8 working hours. find the pdf on my pc somwhere

  Hi, I'm in total panic. I have daughter an Acrpobat PDF reader for 8 hours - suddenly when I closed the pdf it didn't close properly by asking to save what was written and I've lost 8 working hours. find the pdf on my pc somwhere

  Hi klaush21776048,

  I'm sorry, but if the file is not saved correctly, then it is not possible to find the PDF file.

  Kind regards

  Ana Maria

• There seems to be a problem with the soft ware.  We use the CS6 for Records services and when we try to save the record, part of the record is stored. The record to be saved as an mp3 file is 70 to 100 KB but recently only 3 KB are generally

  There seems to be a problem with the software.  We use the CS6 for Records services and when we try to save the record, part of the record is stored.  Usually the recording to be saved as an mp3 file is 70 to 100 KB but recently only 3 KB are recorded.  What should I do to fix this?

  You may need to reset your preferences of hearing files stored in C:\Users\"username"\AppData\Roaming\Adobe\Audition\5.0. If you rename this folder in 5.0.bak that hearing won't find it when you open the next time if it will recreate a new settings with the default settings folder. See if hearing then works as expected.

• I just downloaded Adobe XI on my macbook air, and now I can't save or print the PDF files. Don't let me do print - save as PDF, and if I do record as I get a message indicating that the file is corrupted. I had NO PROBLEMS of all do this several times unt

  I just downloaded Adobe XI on my macbook air, and now I can't save or print the PDF files. Don't let me do print - save as PDF, and if I do record as I get a message indicating that the file is corrupted. I had NO PROBLEMS of all do this several times until I downloaded the new version. I uninstalled and reinstalled it, nothing helps. I am super frustrated.

  lrfrustrated wrote:

  I just downloaded Adobe XI on my macbook air, and now I can't save or print the PDF files. Don't let me do print - save as PDF, and if I do record as I get a message indicating that the file is corrupted. I had NO PROBLEMS of all do this several times until I downloaded the new version. I uninstalled and reinstalled it, nothing helps. I am super frustrated.

  Print > save as PDF - use an excerpt (part of Mac OS X), so Adobe Reader should have no effect on that at all.

  As for the error "file corrupted", simply uninstall the Reader app will not affect it. Follow these steps:

  Mac/HD/Library/Internet Plug-ins

  

  Trash the files AdobePDFViewer.plugin and AdobePDFViewerNPAPI.plugin

  Mac HD/Applications

  

  Trash the application Adobe Reader

  [user] / Library/Preferences

  

  Trash the com.adobe.Reader.plist file

  To access the [user] / Library, hold down the 'Option' and click on 'Go' in the FInder menu.

  Mac HD/Library/Application Support/Adobe

  

  Trash the drive (full record)

  Empty the trash.

  Download the installer FULL here: http://get.adobe.com/reader/enterprise/

  Quit your browser, and then reinstall the drive.

  Run it from the Applications folder and agree to the license agreement.

  You should have no problem with Safari PDF files download.

  Unfortunately, ANY PDF file that says it is damaged.... You will need their trash.

• 'The applet bad class name' exception when you try to save functional forms/EBS test with Oracle Open Script 12.2.0.1 in JRE 1.6.0_45

  Hello

  I have a problem when you try to save functional forms/EBS test with OpenScript in 12.2.0.1 and also 12.1.0.2 version.

  The problem has been verified in two environments:

  1. Windows XP 32-bit, Internet Explorer 7, 1.6.0_45 JRE.

  2. Windows 7 32 bit, Internet Explorer 8, 1.6.0_45 JRE.

  
  The exception that I can see in the Java Console is:

  ...

  SSV dialogue is removed

  Loading of ATS Oracle Forms Module functional test [5.5] [JRE_1.6.0_45 Oracle]

  Temporary directory FormsFT Helper: * \Temp\OpenScript_FormsFT

  ...

  Loading cached forms pots...

  ....

  oracle.forms.engine.Main cracked

  Base: exception: the applet Bad class name.

  exception: the applet Bad class name.

  java.lang.SecurityException: applet Bad class name

  at sun.plugin2.applet.Plugin2Manager.createApplet (unknown Source)

  to sun.plugin2.applet.Plugin2Manager$ AppletExecutionRunnable.run (unknown Source)

  at java.lang.Thread.run (unknown Source)

  Exception: java.lang.SecurityException: applet Bad class name

  I think that I already tried all possible combinations with options and preferences of OpenScript.

  I also reinstalled several times to JRE.

  What is interesting is that everything works fine when I use the 1.6.0_38 JRE. However, all versions up to it give me the above exception.

  Could you please give me some advice what I can do or check? Maybe you can provide me with some information about the things that have changed in JRE 1.6 update 38 which can affect the load java applets by OpenScript?

  Everything I could find in the release notes was that some security problems have been repaired.

  Thanks in advance for any help.

  Because of security changes introduced in JRE, use NO build longer than 38 for JRE 6 (1.6.0_38) and does not exceed the 11 for JRE (1.7.0_11) 7.

  REDA

• Acrobat XI States file is read-only when you try to save

  These last few weeks that I had this problem... when registering to our shared reader, Acrobat XI States leader is unalterable (pop-up below) and I have to save under a different name or in a different folder.

  

  I must then save the file to a drive or a different folder. No other product Adobe has this problem and it happens on our shared drive. IT says that I have all the permissions for the folder.

  Does anyone else have this problem?

  Hi aggierat90,

  Have you tried to disable the preview in Windows Explorer? We have seen this problem occur when preview is enabled.

  Best,

  Sara

• Windows guard stop my PowerDirector 8 program when I try to save the changes.

  I work with the Director of Power 8.  When I try to save changes I get the error message "a problem caused blocking the program works correctly.  Windows will close the program and notify you if a solution is available.  I am able to edit and record other PowerDirector projects.  I put a lot of time in this project.  I need to record a last few changes.  Any ideas on what could cause this problem?

  I would recommend in this by looking at the Power Director site: http://www.cyberlink.com/support/search-product-all-faq.do

  Also, make sure that it is uptodate.

• After installing IOS 9.3 for Ipad3. I can't activate iPad by Apple ID display error meassage «e-mail cannot be used to unlock the iPad»

  After installing IOS 9.3 for Ipad3. I can't activate iPad by Apple ID display error meassage «e-mail cannot be used to unlock the iPad»

  If you see the lock of Activation screen after update your iOS device, you want to try the following:

  -Restart your iOS device and try to connect again.

  -Visit appleid.apple.com and log in to ensure that your password is correct.  If you change something here, only to change your password.  Try to connect again on the iPhone.

  -Connect on iTunes on a computer and put your Apple ID and password when it prompts you (as it did on your iOS device).

  -ICloud.com check in the settings.  If you see your iOS device listed, remove account (do not erase or hit lost mode). Restart your device and try to reconfigure.

  -These measures should solve most of the problems.  For someone else, you will need to contact Apple (1-800-MY-APPLE or getsupport.apple.com).

  I hope that helps!

• After installing the latest updates, my screen on large icons, screen too big for my moniter

  the only way of difficulty was to uninstall updates.

  After installing the latest updates, my screen on large icons, screen too large for my moniter the only way of difficulty was to uninstall updates.

  Sounds like something in the update causes a conflict with your video driver or change the resolution settings.
   
  The first thing to do to solve the problem is to try to install each of the updates one at a time instead of let Windows Update do several updates together.  If you're lucky, the problem can not ride again.  If so, you'll know at least update is the cause of the problem.

  If the problem persists, try right click on an empty area of your desktop and select properties to open the display properties dialog box.  Select the settings tab.  Look to see if the screen is correctly identified and if the resolution seems correct.  If you spot something wrong, change to the correct setting.  If everything looks correct, you can try to change the resolution to see if that can solve the problem.

  You can also check the website of the manufacturer of your graphics card to see if they have an updated display driver.  Updates of the operating system only sometimes work correctly if you have the latest version of the drivers for the various components.

  If all else fails, you can uninstall the update one that is causing the problem and mark do not show you this update again in Windows updates.   Doing so will be considered a last resort - especially if the update in question is one of the security updates.

• Cannot access internet after installing the latest Windows Update

  * Original title: Question access to the internet after you have installed the latest update

  Last week, I installed the latest update of Windows 8, however once installed, I was no longer able to access the internet and became a message saying that the page cannot be displayed. Below it there is a button to click to solve the problem of connection but I did and it came back with no connection problem.

  I reset my router, but there was no question that I could access the internet on my phone and my roommates laptop. The only way that I could access the internet again was to restore my pc and remove install.

  I was then forced to install the update tonight and it's the same thing so I had to uninstall these updates again to access the internet.

  Can you please tell how can I install the update it will affect my ability to access the internet?

  Hi Victoria,.

  Please help me with the following suggestions:

  1. using modern Internet Explorer user interface or Desktop Internet Explorer?
  2. your computer is in a cable or wireless internet connection?

  3. What is the number of the kb article that is causing the problem with the internet after installing the update?

  4. are you referring to Windows Update (KB2919355) 8.1?

  Windows Update: Frequently asked Questions see (how know what are updates
  been installed?)

  http://Windows.Microsoft.com/en-us/Windows-8/Windows-Update-FAQ

  Method 1: After the update is installed, configure the computer to boot and check if you questions persists:

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135/en-us

  Note: After troubleshooting, consult this section «How to reset the computer to start normally after a boot minimum troubleshooting»

  Method 2: Click on the link below to troubleshoot if the internet explore does not work:

  Why can't connect me to a network?

  http://Windows.Microsoft.com/en-us/Windows/cant-connect-to-network#1TC=Windows-8

  Warning: Reset Internet Explorer settings will not affect your browsing history, unless you check the delete personal settings during the reset. If you want only to view or delete your browsing history, you don't need to reset all the settings of Internet Explorer.

  I hope this helps. Answer please if you have any additional questions with Windows.

• MAX 14.0 broken and database corrupted after installing the latest drivers of device and LV2014

  I have LV2012 and 2013 (both 32-bit) installed on my system Win8.1 64-bit and you used without problem.  I recently went through the agony of installation LV2014 32 - bit Dev Suite 2014 DS2 and the latest device drivers from the August 2014 DVD, and now MAX (v14.0) does not work.  First of all, it is slow to fill the display of system information, then when I try to develop a tree I get a MAX database connection error (see table) and there is no software listed at all.  Third, devices are not listed correctly even if appearing in Device Manager (eg. a CAN interface is no longer lists CAN0 but shows the device but no configuration, even for devices USB DAQ I(see attached), and I CAN installed 14.0), and there is nothing in the data area.

  The first attempts to install LV2014 were prevented by the mDNS NOR answering machine and without stopping when required by Setup of services.  This also affected attempts to fix the MAX.

  All 3 versions of LabVIEW run OK, but projects include more distance or RIO/FPGA hardware - perhaps because of uninstalled software - but without the list of software to MAX, I can't say what is and is not installed.

  I did a reset Configuration data, fixed MAX several times, uninstalled (all the all dependencies), activated the firewall and antivirus and completely reinstalled LV2012, LV2013, LV2014 and device drivers, but without touching the problem.  I have now lost 2 whole days and I start to desperate for a solution.  Surely this can not be the only case of this in the world.

  Mike

  CLD & Alliance member, UK

  Hi Mike,.

  The link below is what you will need to follow to remove the Corruption of database of MAX. It is a removal tool 'automate' the data removal process. . The second document below are the steps for the traverse removal tool.

  MAX Database Corruption removal tool
  https://decibel.NI.com/content/docs/doc-12805

  What is the process of removing MAX Database Corruption
  http://digital.NI.com/public.nsf/allkb/2C7480E856987FFF862573AE005AB0D9

  I highly recommend using the removal tool, as it will do this process for you, you will just need to follow the guests who come to the process.

  Concerning

  Mark

• Why can I still not load the pdf files even after I installed the latest version or reader?

  I received an email, and I'm trying to simply open pdf files to view.  I went through the steps in the installation program Adobe Reader, I typed in my password of the computer and was taken to a page that says "Step 3 of 3", and he wanted me to buy another Adobe app.  So I Quit Safari, leave my email.  Tried to restart my email and then even tried to save the pdf file and then tried to open it to see and I got this message:

  To view all of the content of this document, you need a later version of the PDF Viewer. You can upgrade to the latest version of Adobe Reader www.adobe.com/products/acrobat/readstep2.html

  For support, go to www.adobe.com/support/products/acrreader.html

  
  

  I went to the two sites listed and have still found no answer.  I was wondering why I can't view these pdf files?  If someone a tips or advice to help solve the problems, I would be very happy!

  Thank you for your time!

  Lbbhx1
  

  Assuming that you get this message in Safari, Chrome, or FireFox, then Adobe Reader installation is not complete. You could try saving the file and open it on your computer or reinstall the drive. What he was trying to sell you? Be sure to download Adobe, not someone else.

• Drawing objects in Firefox and Thunderbird after installing the graphics card MSI R6850 of AMD

  After installing the new graphics card (MSI R6850 CYCLONE 1GD5 PE/OC), pilots the latest on Windows XP 32-bit, I frequently meet with Mozilla Firefox 8.0 and Mozilla Thunderbird 8.0 drawing artifacts. The problem presents itself as a horizontal black bands or model checker color scattered. It occurs especially when the child (like the Download Manager) passage of another application for Firefox or Thunderbird or when to switch to a window for Firefox. It affects the entire application or only some rectangular (region clearly who was redesigned due to change of application). Then repaint (such as switch between Firefox tabs) usually solves the problem. This is just visual, the behavior is not affected. The problem never happened to any other application so far. Any ideas? Any who have experienced the same problem? Thanks in advance.

  Zbynek

  P.S. Here's the screenshots for the two problems:

  http://astrofoto.euweb.cz/tmp/black_stripes.jpg
  http://astrofoto.euweb.cz/tmp/color_boxes.jpg

  Try turning off hardware acceleration.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  If disable hardware acceleration works then check if there is an update available for your graphics display driver that corrects these problems.