After Oracle CPU tests are applied

Similar Questions

• Satellite M40x won't start after upgrade CPU test

  I have a portable M40x I took the CPU out of it to replace it with another to test the computer started fine then I stopped and took out and put it's original return CPU, and it wouldn't start. Now it primer with any one of all the CPU. When I turn on the power, all I get is a white screen for a few seconds and the laptop is closed down. Both the CPU is good because I since tested on other computers to make sure that this was not the problem.

  Anyone has any ideas on what is the cause?

  I m not surprised.
  As far as I know, Toshiba does not support updates, and it is not advisable to do something like that.
  It of one that the replacement of CPU on laptops is not easy and not recommended.
  The processors used in laptops are connected to the motherboard using a process called TCP (tape carrier package). It is a method of permanent connection and is used in the interest of miniaturization and heat dissipation.

  He was awarded the new heat paste? It s necessary and important if you want to connect again the CPU.

  It is perhaps a reason for not starting.
  I think more details you will get from the service guy in your country

• When the OS security updates are applied

  We have the following software on the database servers:
  
  Oracle Enterprise Linux 5 2 update
  11g Oracle Clusterware
  Oracle 11g ASM
  Oracle Database 11g with RAC EA
  
  The database serves as a repository for Application of CRM Siebel.
  
  Our system administrator has recently applied the security fixes for Oracle Enterprise Linux (OS). What tests should be performed and by whom?

  user10437903 wrote:
  Can I apply the CPU of the database to the server where the updates of OS security had taken place and test only once?

  Can you? Sure. It's more risky, however. If something goes wrong, you don't know if it's the patch of the database or OS patch that caused the problem, so you don't know what to push. Generally speaking, you would change rather than one thing at a time.

  Since you don't have a suite of automated tests, you must balance this risk against the cost of duplication of testing effort. The most important application, more you want to control how many things are changing at the same time.

  Is it true that OS and Oracle CPU security make no changes to functionality?

  They should not change functionality. Does not not to say, however, that in practice an operating system security patch is not break something depends on your application special, or a database security patch is not break something who depend on you. They are relatively rare, but there is a disc no zero of something goes wrong.

  I need more specific details on the TYPES of TRIALS that should occur, by whom and in what order.
  I do a regression test all of the Siebel Application, which had no security patch given stressing the server database (database on different servers and Siebel) had patched OS security?
  Because functional changes are not supposed to happen from security fixes, which is the fact that this level of analysis? Standard/best practices?

  Like I said - it is highly dependent on the particular company you use and the application that you use. If you have an application that is essential to the maintenance of the operating business where downtime costs millions of dollars an hour, well worth doing a test of complete regression for each security patch. If you have an application that is the subject of various kinds of regulatory controls, you probably need certification that each patch has no effect on the functionality of the application. If you have a relatively low priority request that is not critical to the company, on the other hand, it might be reasonable to apply patches without tests and agree that there is a low risk that something will go wrong and the application will fail.

  Different organizations plot also tests responsibilities differently. Some organizations have a dedicated test group. Some rely on developers. Some require users to test and approve the changes. Some have test analysts. Some companies may want to do a full review of each application, others can be comfortable with a simple test of surface-level that you can connect and demand seems to be upward. Some companies want to make performance / stress testing, which can include the DBA and directors Unix, any other just wanted to test the basic features.

  Best practice is to establish a balance between the cost of the tests, the level of risk of the patch and the cost of downtime. What is appropriate for behind customer servers to the web site a large brokerage house, for example, is probably very different from what is appropriate for the accounting system backend for a medium-sized retailer. The consequences, financial and advertising of the former declining even for a short period are enormous - if that fails, particularly for non-critical time, you can be inconveniencing a handful of internal users.

  Justin

• E.M.P. Configurator windows crashes after Oracle Instance screen 11.1.2.2

  eHi,

  We intend to install the bases and the IR Services.

  We are able to properly configure all components, but because of the lack of space in the disc last configuration web server is down

  After that space is provided when we open EMP Configurator is crashing after Oracle Instance screen and does not go any further.

  We saw.the error in configtool.log below

  []] [2014 05-27 T 03: 23:40.177 - 07:00] [EPMCFG] [PATH] [EPMCFG-05935] [oracle. EPMCFG] [tid: 12] [ecid: 0000KOxDDHi7Q9gpLCk3ye1JX6UY000000, 0] [SRC_CLASS: com.hyperion.cis.utils.StopWatch] [loading CT documents] task was completed. Seconds of execution time [0] [2014-05 - 27 T 03: 23:40.380 - 07:00] [EPMCFG] [PATH] [EPMCFG-05935] [oracle. EPMCFG] [tid: 12] [ecid: 0000KOxDDHi7Q9gpLCk3ye1JX6UY000000, 0] [SRC_CLASS: com.hyperion.cis.utils.StopWatch] [storage Init] task was completed. Seconds of execution time [0] [2014-05 - 27 T 03: 23:40.427 - 07:00] [EPMINS] [ERROR] [EPMINS-00001] [oracle. EPMINS] [tid: 12] [ecid: 0000KOxDDHi7Q9gpLCk3ye1JX6UY000000, 0] [SRC_CLASS: com.hyperion.hit.wizard.Wizard] trace: unexpected error: [[java.lang.NullPointerException at com.hyperion.cis.config.Configurator.loadClasses(Configurator.java:99) at com.hyperion.cis.config.Configurator.initialize(Configurator.java:91) at com.hyperion.config.wizard.impl.ToConfigurationState$ 1.commit(ToConfigurationState.java:80) to com.hyperion.hit.wizard.Wizard$ (Wizard.java:544) NextClass.run to java.lang.Thread.run(Thread.java:662)]]

  and underneath the error in configTool - stderr.log

  D:\Oracle\Middleware\user_projects\epmsystem1/import_export does not exist or is not a directory java.util.logging.ErrorManager: 1: oracle.core.ojdl.LoggingException: unable to write in the newspaper "D:\Oracle\Middleware\user_projects\epmsystem1\diagnostics\logs\config\configtool-http-ant.log": java.io.IOException: there is not enough space on the drive to oracle.core.ojdl.FileLogWriter._writeBytes(FileLogWriter.java:461) to oracle.core.ojdl.FileLogWriter.writeBytes(FileLogWriter.java:391) to oracle.core.ojdl.BufferedLogWriter.writeToBuffer(BufferedLogWriter.java:335)

  Even if the space available is now EMP Configurator crashes. Help, please.

  D:\Oracle\Middleware\user_projects\epmsystem1/import_export does not exist or is not a directory java.util.logging.ErrorManager: 1: oracle.core.ojdl.LoggingException: unable to write in the newspaper "D:\Oracle\Middleware\user_projects\epmsystem1\diagnostics\logs\config\configtool-http-ant.log": java.io.IOException: there is not enough space on the disk to oracle.core.ojdl.FileLogWriter._writeBytes(FileLogWriter.java:461)

  If this is a new installation, you can try to delete/rename user_projects & reconfigure all the components again (creating new Shared services registry). Just make sure that you have enough disk space before proceeding.

  Kind regards

  Santy.

• After importation, all 'frames' are present, but the picture is blank (gray).

  After importation, all 'frames' are present, but the picture is blank (gray). When I tried to edit in Photoshop CC, it opens correctly. Tried to delete CC with cleaning tool. Re-installed with the same question. Repeated twice with the same consistent result.

  Photos opening are exported during the migration process and opens in Preview/Photoshop. Tried with a variety of photos with the same result as well.

  

  MacOS X 10.11 (iMac end of 2014)

  CC 2015 Lightroom and Photoshop CC 2015.

  Hi clementl55784534,

  Suggest you follow the steps below:

  1. Turn off apply tone auto under Lightroom preferences settings
  2. Restart Lightroom and then import images again.

• Oracle load test agent configuration

  Hello
  
  I just started working on Oracle ATS 9.31.0036.
  In my computer, I installed the OAT application with all the options.
  Now, I want to configure the Remote Agent that has been installed in another machine.
  Can you anyone provide me with the operating manuals for the implementation of Remote Agent.
  I have another question. When after the start of service of OATS, I'm not able to open the administration console.
  I couldn't see any application in the deployment of the 8088 console / console.
  But no service (Oracle Application Testing Suite Application Service) proof of status started
  What could be the problem here.
  
  Thanks in advance.
  
  Kind regards
  Marsan
  
  Published by: Marsan on March 15, 2012 02:44
  
  Published by: Marsan on March 15, 2012 02:50
  
  Published by: Marsan on March 15, 2012 02:58

  Hello

  I had the same problem with the administration console and Test Oracle Manager. I got it working by deploying oats.ear. Deployments, tab, select Install. Then you must select the correct ear file. I think that this right, we will find file % ear OATS_HOME%\install\oats.ear. After that just deploy it with the default values and hope your JNDI tree will lie down properly.

  cordially vihall

• Slide show not repeated after that some buttons are used?

  Hello

  I have this slideshow that I am so close after completing, but there is a problem I'm having with it not repeated after that some buttons are used. I tried to understand what could be the cause, but I can't see what it could be. According to me, that I'm so very close to having this if it wasn't for that matter.

  Slide show buttons '1' and '2' work perfectly, however '3' to '6' buttons do not work completely as it should. During the presentation, as he plays through the slides, if you click on the button "1" or "2", you are taken to the corresponding slide and the slide show resumes automatically, which is correct. However, if you click on one of the buttons "3" to "6" you are always taken to the corresponding slide, the slide show does not resume and remains on this particular slide. I looked at the code for the Action Script 3 several times and I don't see what could be causing this but I'm not too experienced so that there could be an error, no matter how minor, that I'm missing.

  I have attached the file and if anyone has any advice at all or can somehow help I would REALLY appreciate it!

  Thank you

  William

  Is your link to the object or picture.  I ran into this many times, I accidentally select the frame and not the object in the slideshow for the link.

  Although he thinks through the problem only comes when you go directly to the frame and not when you play through.  Maybe action that activates the link lights when the object is revealed onstage on a previous frame.  When you jump on the structure with the object already play in the advances head beyond the line of code providing the link and instructions is therefore missing.

  If the code with the link is on frame 10 and the function to move to the slide rests on frame 15, the film would not only go 10 frame, but also actionscript code that frame so lack the instructions to be a link.  Don't forget that this programming happens on a timeline, if the read head misses the keyframe with the instructions, that he will not return to them to find it for you.  Try to make a keyframe a picture before ordering GOTO AND STOP and put another link it so when the playhead crosses the new keyframe the link code is read correctly.

  That's what I'd do to test the theory,

  Good luck

  Brett

• Old settings are applied to all photos

  Well, I edited a .jpg file in ACR bridges. I chose about 5 other photos to sync with these settings. After that I have synced those my eintire folder synchronized with these settings. When I tried to change > devolpe settings > clear settings nothing happened. When I purged the cache all files clear by default then one returned to the other parameters with saturation and viggnettes. Now every time I open any folder in bridge settings are applied to all my new files and all my photos. When I'm in a new folder I can select all and delete settings then start over, but if I close bridge and reopen the old settings are reapllied. This happens to all types of pictures, CR2, DNG and jpg.

  When I purged the cache all files delete by default then a went back

  for other viggnettes and saturation settings. Now every time I open everything

  file in bridge, the settings are all applied to my new records and all my

  photos.

  Looks like you accidentally together a new camera Raw default.? First open a

  CAB file and tab next to 'basic' just basic is a small menu icon

  with a fly on the menu. Choose Reset as Camera Raw defaults and try again.

• CPU costs are off (think of it allowing)

  Hello
  
  I use Oracle 10.2.0.3.
  
  Whenever I generate explain plan for any query, last line of explain plan is as below.
  
  cpu costs are off (think of it allowing)_
  
  It seems that optimizer has not considered its CPU stats while generating plan for it.
  
  How to activate CPU here statistics?
  
  Optimizer_mode parameter value is 'CHOOSE', and his stats are collected at an interval of one week.
  
  When I use the CPU_COSTING flag in the SQL, then this line went, and the query plan also started giving the % of CPU output of the PLAN. But how can I do cela a default behavior of the optimizer (any setting etc are fixed in oracle 10g for this)?
  
  
  Thanks in advance.
  
  Best regards
  oratest

  See if the "_optimizer_cost_model" (Note underscore) has been configured in your pfile/spfile file.
  To CHOOSE or CPU.

  This setting is different from OPTIMIZER_MODE.

  Hemant K Collette

• How do you map readers network XP, after that all letters are exhausted?

  We have 18 network drives mapped now and more to come.   What happens after all what letters are exhausted?

  A year later and you're still looking for a solution?  See if this helps: http://ask-leo.com/26_drives_is_there_a_way_around_the_26_drive_limit_in_windows.html

• What happens to the audio cd after the cda file are converted to mp3 format? Only the original cd remains unchanged?

  What happens to the audio cd after the cda file are converted to mp3 format? Only the original cd remains unchanged?

  She remains totally unchanged, regardless of how many times it is loaded in the computer.

• Setting up Oracle Application Testing Suite components Server 12.5.0.2.537 takes a long time.

  I am trying to install Oracle Application Testing Suite. It has installed successfully,

  but ' implementation of Oracle Application Testing Suite components Server 12.5.0.2.537 ' takes a long time.

  It is showing the message "set up pending".

  It's also show message 'spawning' C\OracleATS\bin\deploy.bat C\OracleATS\install\oats.ear".

  Progress of the installation is stuck at 99% of last four hours.

  Any idea on this?

  Thanks in advance.

  Dear Nilesh,

  Please try reinstalling with admin privileges.

  Click with the right button on setup.bat and run as Administrator.

  
  

  Please note uninstallation is not necessary.

  Thank you best regards &,.

  Susanto Paul

• Oracle cert exams are equal weight to each of the questions - for example 1z0-117?

  Oracle cert exams are equal weight to each of the questions - for example 1z0-117?

  For example, 1z0-117 Oracle 11 g r2 SQL Tuning has 75 questions.

  Some of these questions you will have to look a long explain plan

  and determine what is happening.

  Other issues could be just take 2 of the 4.

  Is equal weight each question.

  Roger

  Is equal weight each question.

  Yes.  And each issue is 100% right or 100% false.  There is no middle ground with multiple answer questions.

• I recorded annual plan and you paid every month since November 2015. But because of the pregnancy, I can't use adobe more at this time. Can I Cancel to pay after next month, or are there other ways? Please let me know.

  I recorded annual plan and you paid every month since November 2015. But because of the pregnancy, I can't use adobe more at this time. Can I Cancel to pay after next month, or are there other ways? Please let me know.

  Hello

  Please refer to cancel your Adobe Creative Cloud membership

  If you need to contact support technical assistance

  Contact the customer service

  Concerning

• Order in which properties are applied?

  Order in which properties are applied? If I have the same property on a reserve, the entrepreneurial group and build the profile in the order in which they apply to the deployment?

  From the manual - format is bad, but the page 11 of the IaaS Configuration for Virtual platforms PDF

  
  

  Order of priority of the custom properties

  When the same property exists in more than one source, a specific order is followed during application

  Properties of the machine.

  You can add custom properties that apply to computers placed in service for the following:

  n a reserve, to apply custom properties to all computers configured in this reserve

  n a group of companies, to apply custom properties to all computers provided by business group

  Members

  n a global or local level, to apply the custom properties for all devices put into service of the

  action plan

  Build profiles n, which can be integrated into any overall plan or local, to apply the custom

  real estate in all devices put into service of the EHR Architecture

  n a machine asks, if you are a manager of Group of professionals to apply custom machine properties

  be placed in service

  The full order of priority of the custom properties, is that any value of property specified in a source later in

  the list replaces values for the same property specified in the sources higher up in the list. The order is indicated in

  the following list:

  1 build profile

  Blueprint 2

  3 Group of companies

  4 computer resources

  5 reservations

  6 end point

  7 DURATION

  Any execution property has a higher priority and overrides a property from any source. A custom

  property is marked as runtime if the following conditions are met:

  n, the property is marked as a quick user, that specifies that the user must provide a value for it when

  asking a machine. This requires that the applicant of the machine to customize individual characteristics of

  each machine or gives them the opportunity to do so when a default value is provided for the necessary

  property.

  Group of professional manager did ask a machine, and the property appears in the custom properties

  list on the Properties tab of the page request Machine to confirm.

  Custom in reserves and business groups properties can be applied to many machines, so they should be

  used with caution. Their use is usually limited to purposes related to their sources, such as resources

  management, line of business accounting and so on. Specifying the characteristics of the machine to be

  put into operation is usually done by the addition of properties to plans and construction profiles.

  Each plan of any kind may incorporate one or more profiles to build and thus inherit the

  Custom in these profiles properties. Construction profiles are especially useful for the application of the common of games

  Properties for specific to a wide range of plans. For example, your site may want to add a

  second disk, and customize the behavior of Microsoft Remote Desktop Protocol, select Active Directory

  cleaning for a wide variety of machines. If a profile of construction with the necessary properties is created, it can be

  incorporated in all of your plans, local or global.

  When creating and managing draw up profiles, an administrator of fabric can load a certain number of predefined

  property sets to add several related properties all at once, instead of one.