HP C6180

Similar Questions

• HP Photosmart C6180 Magenta Ink not printing

  error message: no

  description of the problem: Magenta Ink not print not EXCEPT on the page that prints after aligning the print cartridge printing is performed. At the bottom of this page, the bars of yellow, Cyan and Magenta print perfectly, just like the mixture of the color shown in the colorful bird printed below the bars.

  Self Test Diagnostic Page is printed with bars No. Light Magenta or Magenta, under print quality model. State of ink and level for both shows like OK magenta and 100%

  Troubleshooting: I ran repeated cycles of head cleaning and aligning the print cartridge print without changing the output. The page that prints after cleaning has NO magenta bars or lines. Seems the page that prints after alignment. Via e-mail support, I was directed to perform a complete reset "semi" and "the NVM reset" - neither of these had no effect. Magenta inks have been replaced, but the problem persists.

  Exchange: the printer had not been used for several months.

  My printer started working. It had been disconnected and sitting for several months. I turned it to try the HP solutions (below) and found that it worked - I had nothing to do!  In any case, I hope this can help some of you with similar problems:

  Hello
  
  Thank you for contacting HP Total Care.
  
  I'm Vivian of HP Total care for all-in-One products, and this response is in what regards the problem with HP Photosmart C6180 all-in-One Printer.
  
  Of your mail, I understand you have a HP Photosmart C6180 all-in-One Printer. Currently, you have a problem in which the printer prints in magenta only on the alignment page and not even on the test page.
  
  I am aware of the importance of the issue and will give you the appropriate information. I need your cooperation and appreciate your efforts to resolve the issue.
  
  First of all I want to thank you for the link, I'll take that as a feedback and will forward it to the concerned Department. However it is not a known, issue because in this case, HP will take immediate action and make sure that defective cartridges do not reach the market.
  
  Please try the following troubleshooting steps. I assure you that those measures would solve the problem.
  
  I ask you to check if you have the same problem with the copy as function. If the printer copy very well magenta do not perform one of the steps given and please get back to us for further assistance. However if you encounter the same problem with the copy as well please continue with the provided steps.
  
  First step: clean the copper contacts.
  
  (1) take a lint cloth or a cotton ball, it wet with water.
  (2) clean the cartridge copper contacts.
  (3) you have the same type of copper on the printer also, contacts if you are able to reach their own contacts in copper on the printer also.
  (4) reinstall the cartridge in its housing.
  (5) when the printer is on, unplug the power cord from the printer.
  (6) press and hold the power button for about 30 seconds.
  (7) re plug the power cord into the printer and the printer.
  
  If the problem persists, proceed to the next step.
  
  Step 2: Perform a drain of power on the printer.
  
  (1) remove the power cord from the product
  (2) press and hold the power button for about a minute (while the power cord is not connected to the printer).
  (3) release the button.
  (4) connect the power cord to the product
  (5) use the button to turn the product on.
  
  Connect the printer to the computer and check; If the problem persists, proceed to the next step.
  
  Step 3: Reset the printer to the factory settings.
  
  (1) use the button to turn the product on.
  (2) remove the power cord from the product
  (3) press and hold the # and 6 buttons.
  (4) while now buttons, plug the power cord to the product
  (5) to continue to press the buttons for about 30 seconds.
  (6) use the button to turn the product on.
  (7) if these steps do not resolve the problem, it will be a hardware problem with the printer in this case I suggest you take the printer to the nearest authorized Service Provider for the service.
  
  Please follow these steps and get back to us with the results, if you need more help, please reply to this message and we will be happy to help you further.
  
  We look forward to hear from you.
  
  For more information on keep your HP and Compaq products up and running, please visit our Web site at:
  
  http://www.HP.com/go/TotalCare

  ALSO:

  If the printer performs the color copy and you get magenta on the copy, it is obvious that the printer works fine, it's a software problem. I ask you to try the following steps, depending on your convenience and get back to us with the results.
  
  First step: reset the printing system
  
  To use the reset printing system feature, follow these steps:
  
  1. in the Finder, choose utilities from the menu reach.
  2. open the printer setup utility.
  3. in the printer setup utility menu, choose Reset Printing System.
  4. click on reset.
  
  Second step: check/repair disk permissions
  
  Click on Go tab in the top menu bar.
  Select the utilities tab.
  Click disk utility.
  Once disk utility appears, select the drive and click the check permissions.
  
  This can take a long time to complete as the Mac will try to check all permissions to the hard drive.
  Now click on the tab authorization to repair disc.
  
  This can take a long time to complete as the Mac will try to repair all permissions to the hard drive.
  Once Permission to disk check is complete, restart the Mac
  
  Step 3: Add the printer again
  
  1. click the Apple on the top of the left hand button.
  2. click on Preferences system, window system preferences will open.
  3. click on the printers and faxes icon.
  4. click on add the symbol on the bottom of the left hand.
  5. you see your printer in the list, select it and click Add on the right side.
  
  Please, do the following and get home with the results, for further assistance please get back to us, we will be happy to help you.
  For more information on keep your HP and Compaq products up and running, please visit our Web site
  to:
  http://www.HP.com/go/TotalCare

• HP Photosmart C6180 with abnormal shutdown Message

  My HP Photosmart C6180 began to make a loop of continuous restart with error of abnormal termination. I've now tried # and 6 at startup to do a reset, but that only solves the problem for about 30 minutes.

  I read on other forums on the internet that this is due to faulty capacitor anyone else managed to solve this problem?

  I notice seven other users seem to have this problem on the forum.

  TTL79 wrote:
  

  I have the same problem. Is it possible to fix once and for all?

  Hi, yes I managed to fix my printer and it is working normally again! However, it is a bit complex - I had to remove the circuit board and replace the capacitors. I put the instructions on this site below as a method step by step for fixing.

  http://www.roshgaind.com/?p=200

  You will need to have a soldering iron, torx screwdriver and buy new capacitors. The whole process takes about 1 to 2 hours, I had limited experience with soldering, but I am familiar with disassemble computers.

  Attempt at your own risk - soldering irons are very hot and can cause injury if not done properly this can permanently damage your printer If in doubt ask a service center to fix your printer or buy a new one.

• Cannot install C6180 because of McAfee firewall

  I did everything that I can to configure the personal firewall of McAffee to allow installation, but Installer tells me that it is impossible to install the driver.  So I disable the FW and restarted the computer.  I keep getting Windows network access groups that I have no firewall.  Yet, the installer says I have the firewall running and used to install the driver.

  What I can do.  I'd rather have the FW running.

  Just for fun, I have the printer powered by bicycle.  After this, the installation went through all the way and I was able to exercise the C6180 in Windows.  I will try to relight the FW and see if it still works.

  Thank you

  Mike

• C5180 & c6180 randomly left the impression at the beginning.

  Hi, I have a problem with my HP printer. I have a 7520 which is fine and works fine all the time. I have 2 other a C5180 and a C6180 and they both have the same question.

  Ps5 printing every so often the printer/s will be leaving the impression at the beginning and don't miss out the background centimetre of printing.

  This seems to happen randomly when it arrives, I can send the photo and he can do it again, but if I send it again once it may be very well.

  Printers are all wired.

  I tried to reinstall the printers, installing them one at a time, let windows choose the driver or install the hp software.

  I'm on windows 8.1 64-bit.

  Any advice would be great

  Hi, thanks for the answers...   Get tri...

  Thank you again...

• C6180 scan works very well from the printer to the pc, but hp solution center gives error 4, [(3,42,0)]

  Photosmart C6180 wireless unit connected to your PC running windows 7 64-bit ultimate.

  Scan worked fine but after some update (I have not seen that and when) stopped scan from the hp Solution Center. It gives an error 4, [(3,42,0)].

  If I scan directly from the printer, it works fine, even if I send the jpg for the PC images\Mes traverses the directory.

  I already deleted the hp Solution Center and reinstall it using AIO_cda_FSW_Full_Win_WW_130_140.exe

  Thank you

  hasksm

  Hi there hanksm,

  I'm sorry to hear about your problems with your Photosmart C6180 and Windows 7 scan and notice you receive the error code. I studied the error and found a position with a person with a 'Solution', so hopefully this will help your situation.

  Please see JasonBlake7 post: scanning error

  Please let me know how it goes and if you need help!

  Thank you

• C6180 incorrect ink cartridge

  I replaced the Cyan ink cartridge in my HP PhotoSmart C6180 printer.  Now I have an error on the printer screen saying ' Incorrect ink cartridge - ink following cartridges cannot be used after the initialization of the device and must be replaced (for cartridge Cyan triangle symbol).

  I noticed that the old cartridge HP C8771W part number.  The new cartridge was the HP C9339W part number.  Both cartridges were packaged in a combo package '02'.

  I thought about it myself.  The C9339W cartridge is for initialization only.  The C8771W is used after initialization.

• C6180 all in one offline

  I have a c6180 printer all in one I use wireless with 2 laptops - both hp. one is windows 7. two portable computers say the printer is offline and will not print. The wireless network is true very well. How he do back online?

  Hi, take a look at this linkHP.

• Cannot print in black C6180

  My C6180 printer all-in-one just stopped printing in black. I changed the cartridge of the printer 3 times and it made no difference? It prints in color but not black. I cleaned the cartridges and that did not help. I noticed on some other forums that other people have the same problem without finding a resolution.  Anyone got any suggestions?

  Well, I might have some hope. Actually, we have found a solution to this problem and our printer now works as usual. I'll try to explain what we were doing, so I hope it helps someone else. I must say that I was chatting online with a HP technician at least an hour and it never recommended this solution, and we found it on their help page. Maybe he did know about this!

  First, you will need to access the Toolbox of printer on your computer. Go to start-programs-HP-HP Solution Center.

  Select settings

  In the drop-down list, select the printer settings

  Select printer Toolbox

  In respect of peripheral Services, select the option for clean print heads

  It's a clean deeper than what is being done to the printer itself. We ran this about 5 times, and at the end of this it was printing black again. It was a few months ago and we have not had a problem since.

  I hope it helps someone else. HP did not of course help us!

• HP Photosmart C6180: hp photosmart c 6180 turns off when it is connected to the network and blinks green photo

  When my Photosmart C6180 is related to two wireless and ethernet network after any number of hours it stops itself down and the green light on the front panel by the icon of camera flashes.  You will then have to push the power button to turn back.  Not very practical for a network printer. Router is a Linksys WRT 1900 ACS.

  Hi wjabdella,

  Thank you for your answer!

  In the post I provided on the hard reset, he mentioned: sometimes, when plugged into a surge protector or battery backup, the quantity of electricity is not received by the printer.  Power problems can cause printing problems.  It is particularly important to be plugged directly into a wall outlet with wireless connectivity problems, "sleep mode" and other power problems.

  So by unplugging the power and waiting, it resets the printer almost to its original state without making a complete factory reset and lose any other information.

  Don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I hope that answers your question!

• ePrint for K550 and HP c6180

  Already posted in the wrong Board (Android tablets)

  Why the great Hewlett-Packard company cannot provide never clear complete & correct instructions step by step on how to do things?

  I see the Officejet Pro K550 dtn listed as HP ePrint and Android 4.4 Print services support.

  How can I activate ePrint?

  When I try to do, she prays for a printer email address.

  I know the IP address of the printer, I don't know it's e-mail address.

  HP help pages request to press the (nonexistent) web services or search on the built-in browser (also nonexistent) HP Web Services printer page.

  When I try to use Android 4.4. My Nexus 5 (actually, now upgraded to Android 5 aka Lollipop), I get the IP address of the printer, he tries to get settings, but failed. Same error in the HP Photosmart c6180 unit.

  When I try to use HP connected it asks you a claim code.

  How can I get a code of request for one of these printers?

  Hello

  First two printers are NOT ePrint as shown on the following (see the first column):

  http://support.HP.com/us-en/document/c02814760

  You can use HP ePrint app or HP AiO Printer/Remote app to print. My suggestion using HP ePrint app because the other application may ask your printers email addresses and they will not. Very important thing: they MUST BE on the same network. How do you connect them now?

  Kind regards

• If I only print in black why my HP Photosmart C6180 uses up color cartirges? Are expensive!

  If I only print in black why my HP Photosmart C6180 uses up color cartirges? Are expensive!

  Hello

  All printers do the same thing that even many printers have an option to print in black INK ONLY. The reason: during the process of global warming, printers need to use all inks to check and maintain their print heads... Some people say, we turn on the printer / OFF it will use more ink, I can't confirm that but understandable.

  Kind regards.

• PhotoSmart C6180: page c6100 is broken

  I am trying to download a driver for my printer C6180, but all roads lead to this page:

  http://support.HP.com/us-en/product/HP-Photosmart-C6100-all-in-one-printer-series/1153695/model/1153...

  This page is empty.  Is there another page?

  Hi @eTTguy,

  Welcome to the HP Support forums.

  I understand that you try to download the drivers for a HP Photosmart C6180 all-in-One Printer for Windows 10 but cannot because the tracking link opens a blank page. I want to help you with that.

  I am currently on a Windows 7 PC using Internet Explorer and Google Chrome, and the link you posted took me to the support home page for the HP Photosmart C6180 where you would still need to click on "Software & drivers" and the blue "go" button under "Option 2" to get the drivers HP Photosmart C6180.

  If you follow this link, so that it brings you directly to the page software and drivers with a red download button click on start download - drivers and software HP Photosmart full feature.

  This link should work. If she opens another blank page, try a different web browser. Web browsers Act sometimes differently with different websites.

  Please let me know if that solves the problem, or if you need assistance.

  In fact, if it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• Photosmart C6180 problem of Power-Up/Power-Down - loops on/stop/start/stop etc.

  I had the C6180 Photosmart wireless connected to a Mac OS X 10.5.6 laptop Macbook Intel and IBM PC XP SP 2 for more than 2 years.  I did have major problems with the printer.

  Recently, I have known a couple of electric in my house.  Since then the printer has turned off randomly once or twice.  Today the printer began to turn off/on/off/on/turned off/turned on etc.

  It lights up and shows the HP logo and process bar animation for one minute, followed by the message: "abnormal termination.  To avoid damage on the button to turn off the printer.  Do not use a wall or the band switch to close.  Press OK.  Then he stops and leaves upward.

  I tried to enter batch Mfg mode by organizing the * and # keys.  It flashes "Mfg commands - enter special Key Combo" for the second of two, then stops and makes a loop on/stop/start/stop again and again.

  I have disconnected all data cables, installs the printer in another room, closes the wifi on both computers and connected directly to the wall on a different circuit to eliminate problems of low power as the culprit.  I swapped the power cable between the wall and the block of the AC adapter with the same exact type of cord of another piece of equipment with the same results.

  I wonder if it is a symptom of a surfboard logic damaged in the printer, or a problem with the AC adapter?

  If it is the logic board, does pay to get it fixed?  An equivalent printer for Mac would cost about $200.  Not to mention that I came just to have stored on cartridges.

  What is a likely indication of a problem of brick AC adapter?  If so, should I spring for a replacement block AC adapter for $30?

  I was not able to find this question in a post on the forum and I was wondering if it's 'Au revoir' to the C6180?

  Thank you for your contribution to this number

  Try this:

  1. If the printer is still on, unplug all rigid and flexible cables at the back of the printer.

  2 unplug the power cord also from the wall...

  3. wait for two minutes.

  4 reconnect the power cord to a wall outlet first.

  5. hold the pound (#) and six 6 buttons.

  6. all by pressing the two buttons, reconnect the power cord to the back of the printer and at the end of two seconds, exit book and six buttons.

  7. turn on the printer if it goes out...

  Let me know the results.

• Photosmart C610: Black Photosmart C6180 print does not correctly

  My HP Photosmart C6180 is not print black properly. I just made impression after he hada problem with ink xs18a0106. When I ran self test 2 times the black came out faded and veiny however the colors came out fine. Any ideas on how to solve this problem that I need to use black ink and color ink

  Here are a few guides I found on printing photos:

  1. If you are on a Mac: HP printers - print Photos (OS X)
  2. If you are running a Windows operating system: HP printers - print Photos (Windows)
  3. User Manual: user manual

• C6180 is offline connection-how do I get online?

  Have a HP C6180 AIO conncected wireless for HP Pavilion dv7 running Windows 7 Home Premium 64-bit.  When I try to print, get an opinion that is offline. How can I put the printer online?  Operated successfully test print of the AIO LCD screen.  I tried to unplug the power cord and plugging it but not print from laptop.

  Hello

  Please download the Print and Scan Doctor using the link... Print & Scan Doctor

  that should solve the problem.

  Kind regards
  Jabzi

  Help the community by marking this post.
  Your question has been answered? Mark it as an acceptable Solution.
  See a great post? Give a Kudos!
  I work for HP