After plant files-HELP

Similar Questions

• After backup files and restoring Windows XP, I can't open the files backed up.

  After backup files and restoring Windows XP, I can't open the files backed up. The files are password on a user account. I know the password. But the message received when you try to open them is: access is denied. Drag / drop the files in 'Shared files' result in the same message. I know that the files exist, because when I open backup and browse for them, they are displayed. Is there a method to open? I have Windows XP Media Center Edition, Version 2002, Service Pack 3 update. I tried to back up the files with backup of backup, but it does not work.

  Hi error,.

  I suggest you follow the article in the Microsoft Knowledge Base and check.

  How to capture a file or a folder in Windows XP

  http://support.Microsoft.com/kb/308421

  I hope this helps.

• How to recover lost e-mails (partial) after compressing files

  I use windows XP sps, three days ago, I made an oulook express process of compressiom files, after that a windows command prompt I was asked to do.

  Unfortunately, some of the emails (Jan. 2011 - August 2011) was found missing in outmail storage file, after the file compression. I think they were

  automatically removed during the compression of files. Although I found a backup (master) folder in the trash, I still can not return emails lost after running

  recovery in the trash. Can someone help me recover lost emails?

  For your information: until the compression of files - outmail storage folder size is approx. 1.2 GB / after compression: 827 MB

  Thank you

  OE does not compress.  It compact, which means that it removes the space in the file.  This should be done regularly, otherwise it will be too fat and become corrupted, what happened to you.

  See point 2 here: www.oehelp.com/OETips.aspx#2 and you can try to manually import the file bak (just give it another name - see www.oehelp.com/backup.aspx#wm).  If this does not help, then my DBXpress program (www.oehelp.com/DBXpress/) may be able to recover lost messages.

  Steve

• Illustrator crashes when I close the files - help!

  I installed Illustrator CC 2015 and have several problems:

  1. when I open files that nothing appears moreover argues (preview CMYK/GPU) after each file name

  2 - when I close the first file I opened it crashes every time there is any file.

  I'm on a PC running Windows 7

  I've uninstalled and reinstalled Illustrator without result.

  I have a cat of support, and it was a GPU issue. Once I unchecked performance GPU in my preferences of all has been fixed.  Thanks for all the help, I must get back to work now!

• I have Lightroom 1.4.1 and I just started shooting the Nikon D700.  I can't Lightroom to read my new raw files, help...

  I have Lightroom 1.4.1 and I just started shooting the Nikon D700.  I can't Lightroom to read my new raw files, help...  Y at - it a plug-in or update I can get?  I can't afford new software after new camera and lens new!

  Lightroom 1.4.1 does not support native (NEF) files from the D700 because the camera didn't even exist when it was released. To get help, you have two options: upgrade to Lr 2.x (paid for the upgrade) or convert your NEF files to DNG.

  DNG 5.4 converter can be downloaded from http://www.adobe.com/downloads/ (see the right-hand side of the page)

• How can I get rid of these descriptions after my files

  How can I get rid of these descriptions after my files.

  EX .doc .jpg to .txt .mp3

  How can I get rid of these descriptions after my files.

  EX .doc .jpg to .txt .mp3

  See the response of Chet814, but let me add the following: a file extension is much more than a description. It tells you what type of file it is (and therefore which program is needed to open it - see below) and I highly recommend that you do * not * hide them.

  For example, a .doc file is a text file that can be opened with Microsoft Word (or a compatible program), an .mp3 file is an audio file, a .txt file is the text that can be opened with Notepad, Word, WordPad, etc.. a .jpg file is a graphic image that can be opened with any graphics program. Take this information from the file name, you sometimes find yourself in situations where you cannot open a file and you don't know why.

• . M2T "generic import error" after the files moved

  That someone know something for winging a .m2t file that PrPro generated previously imported and edited very well, who has then squirrels after the file has been moved?  (details below)
  

  Thank you.

  -------------------------------------

  Recently, I moved the source (including the sidecar files) for work files off my C:\ to a backup disk, in a desperate move to take off a suddenly frigid Premiere Pro and still (C:\ drive space was extremely low).  I thought I was OK to do it, since I had exported all my final video files and confirmed that they looked fine (amount).  However, some of them were .m2t files, which still had no audio its chronology.  Much scrounging to find out later, I decided to try to re - export these files from their source PrPro projects, this time without audio multiplexing.  I expected to just move the source files in their new location.  It worked for most of the files, but not the .m2t file.

  Here are my patches attempts (failed):

  1. Use move function PrPro manually navigate to the file and select it.  (Fails.  File is not displayed in the location of the project and is still missing in the timeline.  "But PrPro generates no error to announce or explain the failure).
  2. Re-import the file in the current location.  (Fails.  I get "error importing generic," with zero further info.)
  3. Move the file (and the sidecar files) to the original location, then re - locate with PrPro.  (Fails, as 1.)
  4. Re-import a file in the location restored (after 3).  (Fails.  Same as (2).
  5. Copy and rename then file (and sidecar files) in restored location and then freshly import this file completely-news-to-PrPro.  (Fails.  Same as (2).

  I have not yet tried the things:

  1. Deleted cache.  I have read horror stories here on edit work days lost to empty cache, then now that I only once the discs are printed and iso are archived.
  2. Convert a file using another program .m2t. Strictly speaking, I tried with (groan) Windows MovieMaker, but it will not display an image larger than 740 x 480 (Yes, settings allow larger, but only as Giants black residents.)  I maybe reinstall my prior NLE (Avid Pinnacle) - should work, but may take hours to reinstall.

  Solution:

  I gave this fixation within PrPro and rather bought a type of video file converter.  I got Video Converter Ultimate of Wondershare, which was not too expensive and works well.  Now all my .m2t files are converted into file types PrPro like much better, and they import no problem in my project.

• After Effects CS6 help? transfer data from tool rotobrush 1080 p to resolution 4 k

  After Effects CS6 help? transfer data from tool rotobrush 1080 p to resolution 4 k

  You cannot transfer the data. At best you can return on a mast and apply it to the plus-res images, but of course there will be artifacts. you really shouldn't waste tiem and simply do and redo the roto.

  Mylenium

• All hidden files are visible after the command help

  Hello
  When I removed all my files were hidden 'newfolder.exe' virus and I have should use a command in cmd to display them.
  After each use attrib command ([driveletter]:------attrib - r - a-s - h) my files are back but all files hidden, including the file system and the album art and etc are too visible

  How can I solve this problem?

  Thank you

  Hello

  Windows has the ability to hide all system files, it's looking at the properties of each file to see if the checkbox 'hidden' or 'system' is defined.

  The command you used all the flags hidden / system removed from all files on your entire hard drive. There is no way to undo what you have (except the System Restore, if necessary). The reverse of the order hiding everything, including your files.

  The preferred method to hide or display files is to go to Folder Options and together to "hide system files and hidden", but this will not help now, because you corrupted the data he uses by running this command.

  If the system restore will not roll back to before running this command, you will need to manually enter each file and re - configure these options.

  Shawn B Keene [MVP]wire detail reference:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/how-can-i-hide-my-system-files-again/f5bfa796-0d5a-E011-8dfc-68b599b31bf5

  I hope this helps.

• Can help you recover a file of trial version free iWork'09, after the file has disappeared?

  I lost a file that I was working free iwork09 trial.  I tried to import into the iwork for the icloud, but I didn't know how to do it.  Iwork free trial had already crashed on me, I have so been diligent about saving my work.  Unfortunately, at some point, the trial version crashed and the file I was working on a disappeared.  I had already tried to share the file by e-mail or download it in pdf format.  None worked.  When I tried to mail, ever come e-mail agent.  When I tried to save in pdf format, I got a message that iwork could not save the file as a pdf, or any other format.  Is there somewhere on my computer that I might be able to find one of my versions previously saved this file?

  Time Machine backup. The trial did not support back to, or automatic backup. Once the trial expires, you probably can't do anything with it anyway, and Apple has long taken by the servers support iWork to purchase a license.

  If you download a Pages ' 09 pages to iCloud document, and it is saved, it is therefore more a compatible Pages ' 09 document.

• Export dialog after clicking file > export (or right-click > export or shift + cmd + E)! Can someone help me please?

  Hello

  It's all in my title... I want to export my photos but I won't even have a box of export dialog that opens... I never had this problem with the previous version...

  I have need for work... so if anyone has a solution to my problem... Thank you very much!!

  Hi again,

  Suggest to wait until LR 6.3 or next update is out, once it is available, so you can update your LR

  Concerning

  Rohit

• How can I keep my Bookmarks Toolbar icons (I tried Deiconizer to bookmarks) even after downloading files?

  I prefer a clean workspace in my browser, I'm looking to get rid of the icons in the bookmarks toolbar. I've been using the bookmarks-Deiconizer (version 2.3) and it works pretty well. When I open Firefox for the first time, but also new windows, icons do not appear, do the arrows down, and it's great.

  However, every time I download a file as a PDF file, icons appear and will disappear only after that I closed ALL my windows open or restart Firefox. This is problematic for me because I often work with lots of PDF files and do not want to have to close all windows to get back my own work space.

  Y at - it sort of coding I can do instead to remove the icons? I visited this thread (https://support.mozilla.org/en-US/questions/792988), but unfortunately I can't seem to locate the file "userChrome.css". I think that the coding of Firefox may have changed since then, but I'm not very tech savvy, so I could be wrong.

  Thanks for the help.

  userChrome.css and this file must be located inside the \chrome\ does not exist until the user creates this file and this file in the folder of their profile.

  http://antennasoft.NET/robcee/2012/04/20/bookmarks-deiconizer-userChrome-Edition/

  If you install this extension - ChromEdit Plus the necessary file and the folder will be created for you, and you will be able to add and modify preferences for the 3 'user' files in Firefox.

• SA30 USB do not work after reinstallation, please help!

  Hi, my SA30 USB does not work after reintalling, I don't have the original CD with the phone because it was a gift from my friend... I couldn't find the driver from the website, please could someone help me?

  I could use the USB mouse, but when I plug the external hard drive, he has no answers, I tried to get some new material, it could not detect it. Any information would be welcome, see you soon.

  When install you an OS other than the OEM OS recovery, you need to install the drivers and tools in a right order!

  This command is on the Tools & Utilities CD in a html file! When you follow these order all material must be detected!

  Also you can go to http://eu.computers.toshiba-europe.com and download the drivers

  Hans Bye

• Problems with Satellite A205-S4777 after saving files

  Hi, I made a backup file for the first time. And I burned two CD. Then after my backup files were burning, my laptop is slow all of a sudden.

  Everything would not respond. I open and go on the internet and he would not answer. programs have started up and then freeze it.
  I know it's not the hardware, but maybe the software. What do you think the guy is? Or what should I do? Should I reinstall everything as the recovery and the Applications CD?
  My laptop does that from time to time very well. Sometimes, when I start my laptop, then I'll wait a while, then connect to the internet, then go on the net, so some of my programs would freeze or my internet explore would freeze and say it does not and so on with other programs.
  I know that I don't have a virus or a worm, because I already ran my laptop with my Windows Live Onecare program.

  Please help me, thank you very much.

  Hello
  I suggest you to reinstall your operating system and all your applications, because it really looks like a software problem.
  But given that nobody here knows what he could really be with you (since you´re ask here :)) you should do a table 'clean up' and restore your system.)

  This would be the best, and if you got your machine it would be nice if you give some information, if it worked.

  Greetings :)

• Rocking after close file trigger

  I'm new to Labview. I have an application requires alternating relaxation and ready signal, if a trigger input channel reach a fixed level, trigger will have the value True and ready will be set to False; then the system will record data on disk (in local RT), while loan are set to False, the system does not check the channel level; After registered number of samples, close the file and set loan to True, disable Trigger to False. I use Write to File express VI measure to save data, but I could find a way to toggle ready and trigger.

  Please help me out here. Thank you!

  My system is cRIO9073, attached code