Rocking after close file trigger

Similar Questions

• After backup files and restoring Windows XP, I can't open the files backed up.

  After backup files and restoring Windows XP, I can't open the files backed up. The files are password on a user account. I know the password. But the message received when you try to open them is: access is denied. Drag / drop the files in 'Shared files' result in the same message. I know that the files exist, because when I open backup and browse for them, they are displayed. Is there a method to open? I have Windows XP Media Center Edition, Version 2002, Service Pack 3 update. I tried to back up the files with backup of backup, but it does not work.

  Hi error,.

  I suggest you follow the article in the Microsoft Knowledge Base and check.

  How to capture a file or a folder in Windows XP

  http://support.Microsoft.com/kb/308421

  I hope this helps.

• How to recover lost e-mails (partial) after compressing files

  I use windows XP sps, three days ago, I made an oulook express process of compressiom files, after that a windows command prompt I was asked to do.

  Unfortunately, some of the emails (Jan. 2011 - August 2011) was found missing in outmail storage file, after the file compression. I think they were

  automatically removed during the compression of files. Although I found a backup (master) folder in the trash, I still can not return emails lost after running

  recovery in the trash. Can someone help me recover lost emails?

  For your information: until the compression of files - outmail storage folder size is approx. 1.2 GB / after compression: 827 MB

  Thank you

  OE does not compress.  It compact, which means that it removes the space in the file.  This should be done regularly, otherwise it will be too fat and become corrupted, what happened to you.

  See point 2 here: www.oehelp.com/OETips.aspx#2 and you can try to manually import the file bak (just give it another name - see www.oehelp.com/backup.aspx#wm).  If this does not help, then my DBXpress program (www.oehelp.com/DBXpress/) may be able to recover lost messages.

  Steve

• How can I get rid of these descriptions after my files

  How can I get rid of these descriptions after my files.

  EX .doc .jpg to .txt .mp3

  How can I get rid of these descriptions after my files.

  EX .doc .jpg to .txt .mp3

  See the response of Chet814, but let me add the following: a file extension is much more than a description. It tells you what type of file it is (and therefore which program is needed to open it - see below) and I highly recommend that you do * not * hide them.

  For example, a .doc file is a text file that can be opened with Microsoft Word (or a compatible program), an .mp3 file is an audio file, a .txt file is the text that can be opened with Notepad, Word, WordPad, etc.. a .jpg file is a graphic image that can be opened with any graphics program. Take this information from the file name, you sometimes find yourself in situations where you cannot open a file and you don't know why.

• Dell Inspiron 531 - summer pc try to restore factory settings and hit the F8 key after close to a dozen times. I never see the advanced options to choose the factory restore. HELP please...

  tried to restore factory settings and hit the F8 key after close to a dozen times.  I never see the advanced options to choose the factory restore.   HELP please...  I'm following indications out of Dell's web site as well.    UGH

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_us?c=us&l=en&s=Gen&redirect=1

  If you have problems with the process of recovery of Dell, contact Dell at the link above.

  It's Dell recovery, not Microsoft software/process of.

  See you soon.

  Mick Murphy - Microsoft partner

• . M2T "generic import error" after the files moved

  That someone know something for winging a .m2t file that PrPro generated previously imported and edited very well, who has then squirrels after the file has been moved?  (details below)
  

  Thank you.

  -------------------------------------

  Recently, I moved the source (including the sidecar files) for work files off my C:\ to a backup disk, in a desperate move to take off a suddenly frigid Premiere Pro and still (C:\ drive space was extremely low).  I thought I was OK to do it, since I had exported all my final video files and confirmed that they looked fine (amount).  However, some of them were .m2t files, which still had no audio its chronology.  Much scrounging to find out later, I decided to try to re - export these files from their source PrPro projects, this time without audio multiplexing.  I expected to just move the source files in their new location.  It worked for most of the files, but not the .m2t file.

  Here are my patches attempts (failed):

  1. Use move function PrPro manually navigate to the file and select it.  (Fails.  File is not displayed in the location of the project and is still missing in the timeline.  "But PrPro generates no error to announce or explain the failure).
  2. Re-import the file in the current location.  (Fails.  I get "error importing generic," with zero further info.)
  3. Move the file (and the sidecar files) to the original location, then re - locate with PrPro.  (Fails, as 1.)
  4. Re-import a file in the location restored (after 3).  (Fails.  Same as (2).
  5. Copy and rename then file (and sidecar files) in restored location and then freshly import this file completely-news-to-PrPro.  (Fails.  Same as (2).

  I have not yet tried the things:

  1. Deleted cache.  I have read horror stories here on edit work days lost to empty cache, then now that I only once the discs are printed and iso are archived.
  2. Convert a file using another program .m2t. Strictly speaking, I tried with (groan) Windows MovieMaker, but it will not display an image larger than 740 x 480 (Yes, settings allow larger, but only as Giants black residents.)  I maybe reinstall my prior NLE (Avid Pinnacle) - should work, but may take hours to reinstall.

  Solution:

  I gave this fixation within PrPro and rather bought a type of video file converter.  I got Video Converter Ultimate of Wondershare, which was not too expensive and works well.  Now all my .m2t files are converted into file types PrPro like much better, and they import no problem in my project.

• How can I keep my Bookmarks Toolbar icons (I tried Deiconizer to bookmarks) even after downloading files?

  I prefer a clean workspace in my browser, I'm looking to get rid of the icons in the bookmarks toolbar. I've been using the bookmarks-Deiconizer (version 2.3) and it works pretty well. When I open Firefox for the first time, but also new windows, icons do not appear, do the arrows down, and it's great.

  However, every time I download a file as a PDF file, icons appear and will disappear only after that I closed ALL my windows open or restart Firefox. This is problematic for me because I often work with lots of PDF files and do not want to have to close all windows to get back my own work space.

  Y at - it sort of coding I can do instead to remove the icons? I visited this thread (https://support.mozilla.org/en-US/questions/792988), but unfortunately I can't seem to locate the file "userChrome.css". I think that the coding of Firefox may have changed since then, but I'm not very tech savvy, so I could be wrong.

  Thanks for the help.

  userChrome.css and this file must be located inside the \chrome\ does not exist until the user creates this file and this file in the folder of their profile.

  http://antennasoft.NET/robcee/2012/04/20/bookmarks-deiconizer-userChrome-Edition/

  If you install this extension - ChromEdit Plus the necessary file and the folder will be created for you, and you will be able to add and modify preferences for the 3 'user' files in Firefox.

• Close file causes Labview to freeze

  Hello

  I have a Labview program that contains a while loop in which a file is created whenever the loop runs. The file is created at the beginning of the loop and closed at the end of the loop, after that some data is written on this subject. The created file are .raw pictures, and they are about 2.8 MB each.

  The program works well at the beginning and creates the first file with no problems and then continues to create the second file, and written in. All goes well until he tries to close the second file with the function to close the file. Then, it freezes completely. There is no error, nothing. Only, he stops and stay there for as long as I don't force-stop program myself.

  I searched the Internet and found that the creation and closing of a file to each loop is perhaps too for LabVIEW and it causes crash, but I don't really know how to change this, since I have to create a new file each time.

  I can't really join the .vi file to this message because there are about 15 subvis he needs to run, but I've attached a screenshot of the section who ask if she can be of any help.

  There may be another way of coding of the labView program so it bypasses this problem?

  Thank you

  

  I have no problem with the aspects of your VI file.

  What I see that could be the problem, is that you have a structure of the event buried in the VI.  Your inner for loop will pause on each iteration of the loop, unless raise you an event that is handled by this structure to occur.  The only event shown in your picture (there may be other events, but we cannot see them) is the Rotation going Boolean contol must be changed so that the event to fire and the loop For finish and start the next iteration.

  You hit the Boolean value of Rotation are going to each iteration?  Of course, if you click on this button and make go in real life, the way that she is wired to stop both your interior and your curls For most of the code will never be repeated.

  (Tip: you can simplify the code where you build your file name using a Format string in function.)  All string constants are built in the format string.  And all the functions to format numbers get to the format string format, as well.  6 knots and 16 constants will be reduce to node 1 and 1 constant with a corresponding reduction in the number of sons.)

• To access the Jpg image files after deleting files of AAE position

  I was manually copying my photos my iPhone6 on my PC (Windows 10) and deleted the. AAE different associated with JPEG images files before copying them, because I had deleted these same files previously after transfer to my laptop without a problem. I see that now I can't open/view all JPEG files.

  I tried to cancel the deletion but could not do it in windows and seems not due to my recycling bin either.

  Any advice on how to recover the files of the EFA or access JPEG files? Thank you.

  You should be able to open JPEG files, the. AAE files are the sidecar files that contain changes.

  Are the photos always in your phone? If so you could import it onto the computer.

  Edit: If you have removed the. AAE files directly from the iPhone through the computer's File Explorer, the database of iPhone Photos have damaged you.

• Firefox unresponsive after downloading files

  After I downloaded a file, Firefox is not responding and I have to wait for about 10 seconds before I can use it again.

  This also happens when I use 'download all '.

  That may be a problem with your software AV. Firefox let your antivirus by default analysis program the file after the download is complete.

  See http://kb.mozillazine.org/Unable_to_save_or_download_files

• Problems with Satellite A205-S4777 after saving files

  Hi, I made a backup file for the first time. And I burned two CD. Then after my backup files were burning, my laptop is slow all of a sudden.

  Everything would not respond. I open and go on the internet and he would not answer. programs have started up and then freeze it.
  I know it's not the hardware, but maybe the software. What do you think the guy is? Or what should I do? Should I reinstall everything as the recovery and the Applications CD?
  My laptop does that from time to time very well. Sometimes, when I start my laptop, then I'll wait a while, then connect to the internet, then go on the net, so some of my programs would freeze or my internet explore would freeze and say it does not and so on with other programs.
  I know that I don't have a virus or a worm, because I already ran my laptop with my Windows Live Onecare program.

  Please help me, thank you very much.

  Hello
  I suggest you to reinstall your operating system and all your applications, because it really looks like a software problem.
  But given that nobody here knows what he could really be with you (since you´re ask here :)) you should do a table 'clean up' and restore your system.)

  This would be the best, and if you got your machine it would be nice if you give some information, if it worked.

  Greetings :)

• "Estincomplet" DataFinder Advanced Query result is equal to true after 200 files

  I have a VBS that runs a query that has been used for a while, but has reached its limits this week.  Limit is reached is to 200 files, after the "estincomplet" flag is set and do not know how to increase the setting of the maximum value.  I tried the "MaxNoSearchResults" setting, but not had any luck.  I have attached the VBS a subset, I've been using, any input would be appreciated.

  Thank you

  Potentially

  Navigator.Display.CurrDataFinder.ResultsList.Settings.MaxCount = 1000

  is what you are looking for.

• When the open\close file

  Hello

  I have a loop and data acquisition and I want to write data to a file.

  What is the best option: to open the file once, at the beginning of the acquisition and to close when it's done, to open and close it whenever I write a line on the file or do something else?

  If there is no better option, I would like to understand the positive and negative points of each option.

  Best regards

  Gabriel

  
  

• Writing data to the file trigger

  Hello

  I'm new to Labview and I'm having difficulty trying to make this work correctly.

  What I do is followed the release of a transducer and when it reaches a certain critical value I want to write data to a file.

  I have this part works fine, but I'm currently using a higher vi / equal to check the value against the flow of the instrument, so when the value is less than the critical it to stop recording.  I want to continue to save for a number of minutes after reaching the critical value.

  How can I do this?

  Look at using the Express VI of elapsed time.  So when the condition is met, it triggers the VI and it will keep logging data until the Express VI shows the elapsed time.

• The original loop iteration after receiving the trigger of the PXI-6652 pulse

  Hello world

  I apologize if this has been answered somewhere else, but I'm having a hard time finding examples and tired after a long day of work.

  in any case, I use a PXI chassis with a PXI-7854R FPGA Board and module synchronization PXI-6652.  I have the FPGA biphasic pulses being generated at 8 analog channels.  I want to be able to do is to send a trigger (say at 1 Hz) for the PXI-6652, which begins at the exit of the biphasic pulse on the FPGA.  I'm running the FPGA through a host program as the variables on biphasic wave will change based on the current experience.

  So, in short, I was wondering how to generate a trigger of the PXI-6652 pulse and then use this trigger in a host of VI to start an iteration of a loop.  It seems simple enough, so any help would be appreciated.

  Thank you, and I can post the code tomorrow if necessary.

  To answer your second question, Yes, the driver NOR-SYNC 3.3 is available for download and use with LabVIEW 2011.

  As far as use the PXI-6652 to start the acquisition on an FPGA VI, we have enough good examples provided with LabVIEW that will show you how to proceed.  To actually generate a trigger with NO-Sync, there are several examples in the Finder for example of NOR (help > find examples) which send a trigger one of the PFI lines to be used with the other modules.  You can search for OR Sync and they all appear here.  You need this driver installed first before you see anything, however.

  Also, if you look through the viewfinder of the example under Hardware Input and Output > R Series > FPGA Fundamentals > triggers and guard dog, you will find an example of triggering good enough it for use in your FPGA code.

  This example uses NO-Sync to trigger a device of the M series, which is not relevant to what you are doing (he uses DAQmx), but there is a very good example of generation OR-Sync trigger here who I think can help.