. M2T "generic import error" after the files moved

Similar Questions

• A fall media, generic import errors galore

  I'm in the middle of an editing tool and when I came back to it, the day after the start, that's what greeted me. Annoyingly large image below.

  He dropped several multimedia files and when trying to re-import them, replace them or link them, I get the very useful «generic import error» Any suggestions? The files that I try to use are in the same way that those who work and I use a RAID drive so I don't understand why it's a problem all of a sudden, since the files seem to be perfectly intact and work everywhere else.

  I use creative cloud, so the software is up-to-date and OS X is the latest version.

  

  Ok.

  Then open a new blank project.  Go in Edition > Preferences > media...  Note where the media Cache files are stored.  In the section below, clean the media Cache database.  Close Premiere Pro and use the Finder to go to the location mentioned for Cache files.  Delete them.  Reopen the Premiere Pro, then your project.  Leave it to recreate the cache.

• LSD unexpected closing of the errors after the installation of el capitan

  LSD unexpected closing of the errors after the installation of el capitan

  get a lot of errors after start-up and during work

  This procedure will remove some cache files. The files are generated automatically and do not contain any of your data. Sometimes they can become corrupted and cause problems like yours.

  Please, back up all data.

  Triple-click anywhere in the line of text below on this page to select this option:

  open $TMPDIR..

  Copy the selected text in the Clipboard by pressing Control-C key combination.

  Launch the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Paste in the Terminal window by pressing command + V. Depending on the web browser you use, you may need to press the return key. A folder with a long, random name should open. Inside, there should be a subfolder named 'C '. Drag that to the trash.

  Log off or restart the computer. Empty the trash. Test.

• I can't export the registry, I get an error writing the file., it is said, "there may be a disk error or system files" what can I do?

  I kept getting an error of my Norton internet security. When I call there suport tech, they made me do somethings, but nohong has worked. Then they wanted me to try to export the registry. When I wnt in regedit to export it.  He said that there was an error writing the file, there may be a disk or FFL system error.

  Assuming that there really may be a disk or file system error, try to perform a 'chkdsk' on your hard drive.  Use the /R if running chkdsk or check both options if you use the GUI version.

  "How to perform disk error in Windows XP check"
    <>5 http://support.Microsoft.com/kb/31526>

  Be forewarned that control the boot volume occurs at the next reboot after you set up, it runs before Windows starts perfectly, cannot be interrupted and can take more than a few hours to run according to the size of the disk and the amount of corruption, as appropriate.  Run it when you won't need your machine for awhile.

  HTH,
  JW

• CoreTelephony error in trace file as a file for coretelephony tracing operation has failed, perhaps you need more disk space. Details "error opening the file/tmp/ct.shutdown, err = operation not permitted

  I got this error:

  "CoreTelephony Trace file error
  A file for CoreTelephony tracing operation failed, you might run out of disk space. Details "error opening the file/tmp/ct.shutdown, err = operation not permitted"

  I tried to solve it by searching for CoreTelephony errors. Could not resolve yet.
  Software does not, especially of photoshop...

  Any ideas?

  Same thing here, iMac with OS X 10.11.6. All started a couple days ago. Have not found any valid solution online yet, I tried rebooting in recovery mode and check disk, but it seems that everything is ok with the drives and permissions.

• Can someone tell me why I can't see the Import Wizard on the file menu. Run FFX10 on Mac 10.6.8.

  The Import Wizard ignored during installation, but who want to import safari bookmarks now. do not import wizard on the file menu. Run FFX10 on MAC OS 10.6.8. Thoughts? THX!

  You can find the entry menu import into the Manager of bookmarks (library)

  • Bookmarks > show all bookmarks > import and backup > import data from another browser
  • http://KB.mozillazine.org/Import_bookmarks

• I'm trying to import my IE Favorites and have read the instructions on how to do it, but the import button in the file in gray and will not let me import. Any ideas?

  I'm trying to import my IE Favorites and have read the instructions, but the import button in the file in gray and will not let me import. Any ideas?

  Try using the import option in the Bookmark Manager (also known as the name of the library)

  1. In Firefox, select the bookmarks menu, then "organize bookmarks" open library
  2. In the library, select "Import and backup" then "Import HTML.
  3. You should get I hope that the ability to import from Internet Explorer.

• Flight Simulator 2004 install stops at 97% say there is an error with the file world.cab

  While the resettlement of fs2004, the installation stops at 97% saying there is an error with the file world.cab, this damaged disc 4.  Someone at - he found a solution to this?

  Thank you

  Well, if, as you say, the disc is damaged. The solution would be to get another drive.

  Although I would have a look at the following:

  Take a look at the following: http://support.microsoft.com/kb/258496

  I hope that, if necessary, you can get a free replacement disc.

• Error 2753 - the file is not marked for instalation

  Hello

  For a few days I am trying to install a program but keep on receipt of this message - "Error 2753 - the file is not cheap for instalation". I tried to solve the problem with Mr. Fix It but still nothing... Please help

  Have what difficulties you tried it?
  What program are you trying to install?
  Is it just the program that to happen?

  You can try (re) install the latest installer of Windows version WindowsXP-KB942288-v3 - x 86 .exe from here: http://www.microsoft.com/download/en/details.aspx?id=8483
  Note that you need to have SP2 or SP3 installed.

  Let us know if the same problem while trying to install that.

• Explorer.EXE error after the restoration of the ERD Commander

  Dell Inspiron B130

  Windows XP Service Pack 2

  Recently performed a HD format and new installation of XP SP2. After I installed all the drivers and others, I checked that the system was operating normally. After a few days of use, Windows Update downloaded Service Pack 3 and asked me to install. I started to install SP3, but at about 50%, the laptop battery is dead at Midway through the installation. I plugged the laptop on the power source and power. I restarted the laptop and XP started only a completely black screen and the white slider. No ALT + CTRL + DEL, desktop icons, etc.

  I rebooted the laptop of ERD Commander, ran the restore system and selected the first available Restore Point. Point of restoration chosen was recorded a few days before, and was the first recorded point after the clean installed XP. I rebooted the XP system. Wallpaper loaded with white cursor, but NO start menu or desktop icon. A message appears saying "Explorer.EXE Application error, press OK to exit the application" or something very similar. Did not write the error code, but can get if necessary. If I press the OK button (which is my only option), there is still no icons on the desktop or the start menu. Only the cursor. No access ALT + CTRL + DELETE or something like that.

  Thinking about completely wipe the system and reinstalls the operating system. Any suggestions before I jump in this solution?

  Explorer.EXE error after the Restore Point of ERD Commander. Dell Inspiron B130. Recently clean installed XP SP2 on laptop. Installation of SP3, to 50%, battery dies the laptop right in the middle of the installation of the SP3 update. Restarted, XP starts with black screen with cursor only. ERD restart order and restore XP to the last known good config (I choose point immediately after XP clean install). Reboot to XP. Now the wallpaper shows as well as the error message saying "Explorer.exe Application error, click OK to exit Explorer" dialog and then I can't access anything. Any ideas?

  Hello

  What is the full and exact error message?

  Step 1: Check if you are able to boot into safe mode without any problem. If you are able to boot into safe mode without any problems then try to perform the clean boot to safe mode. Also disconnect any external devices connected to the computer.

  Reference:
  To start the computer in safe mode
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  Step 2: If you are still having the same problem, then you can the steps at the bottom of the article.
  How do I recover from a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545

• Error - Installer: wrapper. creatFile failed with error 123: the file name, directory name or volume label syntax is incorrect when installing any program.

  Original title: there is an error then that inistalling some programs such as, java, internet download manager and...

  There is an error then that inistalling some programs such as, java, internet download manager and...

  for example, I want inistall an application or a program like Java, but when I start to inistall, it works like adminstere then said: (Installer: wrapper. creatFile failed with error 123: the file name, directory name or volume label syntax is incorrect.)

  It even I mean to inistall Internet download manager and VLC...

  my pc is automatically updated and when updates are available whenever I download inistall,.

  Please help me, I love my windows Vista, tnx

  Hello Aliahriman,

  Please look at the post below and see if it will solve your "creatFile failed with error 123: the file name, directory name or volume label syntax is incorrect" question.
  He has helped others with a similar issue.
  http://social.answers.Microsoft.com/forums/en-us/VistaInstall/thread/3b180316-95c2-4613-8c38-8515481db22c

  If please reply back and let us know if this helps solve your problem.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• When a program is loaded, an error message Apparait-c:|windows\winsxs\---.dll is not compatible with windows or there is an error in the file.

  When a program is loaded, an error message Apparait-c:|windows\winsxs\---.dll is not compatible with windows or there is an error in the file. What should I do?

  Hello

  always check the compatibility of vista programs on the link below

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  If a program is compatible with vista you can try right click on the setup.exe, and then selecting run as administrator

  It is not compatible with vista, you can try running it in a previous operating system mode

  This does not work for all programs

  read the information below

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

• The macro was interrupted because of an error, but the file remains open.

  I have a file that is opened by a macro Excel (VBA).  The macro was interrupted because of an error, but the file remains open.  I can't find any way to close.  The file is located on a server, not my hard drive.

  This is the code that opens the file/workbook

  Dim fso As Object
  Set fso = VBA. CreateObject ("Scripting.FileSystemObject")
  TT = fso. CopyFile (Sheet1.Cells (2: 17) & "List1.xlsm", Sheet1.Cells (2: 17) & "Merge1.xlsm", True)

  'bind to the data source document.
  wordDoc.MailMerge.MainDocumentType = wdFormLetters
  wordDoc.MailMerge.OpenDataSource Name: = Sheet1.Cells (2, 17) & "Merge1.xlsm", _
  SQLStatement: = "SELECT * FROM ' Sheet1$ ' WHERE sort_order IS NOT NULL" "
   
  "fill the body of the document with the fields in the data source."
   
  "first of all get the field names in the spreadsheet
  Set wkbk = Excel.Workbooks.Open (Sheet1.Cells (2: 17) & "Merge1.xlsm")
  Set headerRange = Excel.Range (wkbk. Sheets ("Sheet1"). Wkbk, Range("B1"). Sheets ("Sheet1"). Range ("IV1"). End (xlToLeft))
  headerValues = Application.Transpose (headerRange.Value)
  wkbk. Close False

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Error! The file definitiation of the lost product.

  ' Error! The file definitiation of the lost product. »

  message appears on the 3rd step of uninstalling on Win7 Pro platform.

  Can I note how to execute the erasing of the related program? Thank you

  Hello Vigor,

  Thanks for your reply,

  Based on your response, I understand you are trying to uninstall Lenovo Onekey Recovery.

  I suggest you to run the fixit below

  The problems that the programs cannot be installed or uninstalled

  Reference: http://Support2.Microsoft.com/mats/program_install_and_uninstall

  Do get back to us and let us know the status in case you need more help.

  Thank you

• Code error 0x7E - the file 'autorun.dll' could not be loaded or is damaged. Setup cannot continue. Windows 7 Upgrade installation problem

  I tried to install Windows 7 Home Premium Upgrade, 32-bit version. My current system is an Intel iMac (later), with Windows XP - SP3 loaded as a virtual machine with Parallels Desktop 4.0 build 3848 (according to their website, it is supposed to support Windows 7).

  I allocated enough space RAM and HARD drive of the virtual machine to run Windows 7. No matter what I do, when I try to run setup.exe, I get the error message: "the file 'autorun.dll' could not be loaded or is corrupt. Setup cannot continue. Error code is [0x7E].

  The file 'autorun.dll' is present on the disk.

  I saw on the internet that other people have also had this problem, with or without Parallels Desktop, and get a replacement DVD of Windows 7 program made no difference to them. Nor is it an available answer, I've seen.

  My Windows 7 disc is new, so I was hoping that Microsoft could solve the problem for me?

  Thank you.

  
  

  
  

  OK, so, this response is a little late to come, but if you never solved...

  I just encountered the same problem - editing similar (Mac, Parallels 5 in my case, the SP3 of XP, MS Windows 7 Home Premium Upgrade) - you must make sure that the DVDROM drive hardware is mapped to "D:" on your XP installation. Thus on the Parallels Desktop menu go to devices, CD/DVD1 and make sure that all your actual DVD player is called is selected (should be the vertical entry in the menu) - not true CD/DVD. The reader should then start and auto run.
  I hope this helps...