After reinstalling program files

I did a full reinstall HP shipped factory status as windows did not start successfully. It was going well until I discovered that I had no adobe reader. I tried to install Adobe 9 but the installer gave Error 1406 - could not write value Adobe ARM to the key \SOFTWARE\Microsoft\Windows\Current Version\Run.Verify that you have sufficient access to that key, or contact your support team. Coiled Installer then return of the installation. I then tried to install Adobe Reader 8 of the section of the computer's hard drive recovery, but it will not be installed. Then I looked at the folder program files and found that the backup of disks created with the recovery of the computer Manager had installed files of programs I had installed myself. These files do not work as a program. Do not appear as a program to uninstall or change a program window accessed through the control panel. The only way I can think to eliminate them is to remove them manually, or perhaps reinstall the same version of the program if it is still available.

However this does not seem possible with Adobe at the moment. Maybe it's because I have Adobe Flash Player Active X showing that reinstalling a program installed on the 30.4.08, so it seems to come from the factory delivered HP, but maybe I should uninstall the flash player and then try to install Adobe 8 HP recovery.

The question is how can I safely delete these non-functional program files and then download the adobe reader software to work. I have Vista Home Premium Service Pack 2 on an HP Pavilion dv6700 Notebook.

Edescape

I finally solved this problem by recovering with a clean install of the partition on the hard drive. I then updated the operating system to windows vista and then updated HP programs. This gave me a stable computer. I then reinstalled my own information from my own backup files produced by myself. I did not use the backup program because I lost the files last time.

Tags: Notebooks

Similar Questions

  • How to: retrieve deleted programs, files and images after reinstalling Vista

    Original title: I reinstalled Vista and accidentally deleted programs, files, and photos. Is it possible to recover these? Recovery program does not work.

    I had accidentally deleted a program and thought by reinstalling Vista it would bring the program back without changing anything on the computer.  By reinstalling, this because all my programs, files and images to be deleted.  I tried using the recovery program, and it goes back only to the day that I reinstalled Vista.  Is it possible to recover images, lost programs and files?

    Buna,

    You have loaded Vista again, so you will need to reinstall all your programs once again, sorry for the bad news.

    Looking through answers here, you should look to see if you have windows.old folder.

    It is information of Support engineers if you have this

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_install/how-do-i-recover-windowsold/7fd9ffa0-BB84-4028-ABCF-e9c7828a2775

    Other people here have said they used RECUVA free recovery program file to help find the files when they were in your place

    http://www.Piriform.com/Recuva

    Revedere.

  • Programs/files/duplicate files, after re-installing Vista operating system

    I reinstalled the same system of operating Visa yesterday and now my C disk free space reduced 129 GB to 64 GB. Under C:, there are two folders: windows, Windows.old.  I have merged the program .old files in the new folder of Windows. I also moved "Windows" under Window.old folder in the Windows under C:\ folder. Then I deleted Windows.old.  But now I have a folder of Windows under C:, then a Windows folder inside the Windows folder, it is llike C:\ a to-do list of programs, files, including Windows, open the windows and I see the folder of another of the window, I can delete it?

    My C drive should resume a State reinstalled pre: 129 GB or more.

    Please can someone tell me how can I remove files/folders/programs which are scattered arcoss different folders. or you professionals call it "partitions"?

    Thanks, Ling

    You can certainly remove the windows.old folder after you have saved your files of it.

    Remove you it through disk cleanup.

    "How do I remove the Windows.old folder?

    http://Windows.Microsoft.com/en-us/Windows7/how-do-i-remove-the-Windows-old-folder

    This is the same method in Vista by Windows 7.

    See you soon.

  • Tried to reinstall Windows7 and received error: "Windows cannot find"C:\Program File (x 86) Nova Logic\ Joint Operations Typhoon Rising\Jointops.exe".

    I am running Windows7 Home Premium and something happened to my computer not allowing me to run some of my programs, we get an error code, for example: "Windows cannot find"C:\Program File (x 86) Nova Logic\ Joint Operations Typhoon Rising\Jointops.exe". Make sure you typed the name correctly and then try again. "After several attempts to reinstall these programs with no solution, I tried to reinstall my OS.  After that I introduced my key code a message came up saying I had to rebuy a keycode to activate Windows 7. a black screen came and another message says that my version of Windows was not authentic and my OS was not fixed or reinstalled. What can I do to fix this problem without buying a new key code and spend a lot of money that I don't have? I'd appreciate any help you could give me!

    I have to reinstall my operating system using the custom installation available on my drive; However, I lost everything and had to reprogram all my files, folders and programs; but at least it didn't cost me another $109.00 for a new code. Thanks anyway

  • Error: "Flight Simulator could not load some program files and will now leave." at the start of the game after installing the reduction acceleration expansion Pack.

    Hi I just bought a copy of Microsoft Flight Simulator gold edition. and after installing and playing on the deluxe edition, I decided to add the extension of acceleration. and after installing the extension, the game no longer works it comes up with an error message saying "Flight Simulator could not load some program files and will now stop. Please reinstall Flight Simulator to restore or repair the installation of the program. ».

    Now, after a few days looking for a response, I decided to ask the guy who made the game.

    The error message also appears when I download just 2 service packs of Microsoft also.
    I have a laptop HP 630 with a processor intel core i3 - 2350 m cpu @2. 30 ghz, 2 GB ram, windows 8 pro 64-bit

    Original title: fsx gold edition...

    Try this, it worked for me:

    (1) uninstall normally from the control panel.

    Reinstall 2) in the Windows directory (C: here)

    (3) install SP1, SP2

  • After Reinstalling windows 7 stopped opening PSD files.

    After Reinstalling windows 7 has stopped opening some files PSD files. I try to open them with Photoshop version 6, it does not work. I tried to open them on the laptop, same garbage. Tell me what is the problem. And how to fix it. Thank you.

    Maybe these files have been corrupted. I can't say how it happened, but it is quite possible. And the files are no longer open, immediately after reinstalling windows? Or not?

    If so, it is very rare in my opinion. You are very unlucky. Try to reinstall photoshop. Then check that these files have been opened or not. In the opposite case. Then the only solution is a special software. I would use this program http://www.photoshop.recoverytoolbox.com/ on your site

    (it is not free but is very good and is not expensive. But in the future you will be immune to such situations. )

    So you can learn more about your problem here: http://www.filerepairforum.com/forum/adobe/adobe-aa/photoshop/207-can-t-open-a-psd-file-th rough-photoshop

  • After the update to 15.0.1 Firefox open from C:\Program Files (x 86) \Mozilla Firefox\updated\firefox.exe

    After the 15.0.1 update this afternoon on a machine 64 - bit Windows 7, I restarted Firefox. Immediately liked began to display warnings that firefox.exe was not a recognized program and needed plugin container, the SVC host access and other things. Weird. So I look in the Comodo and Explorer and it says that the process runs from this path:

    C:\Program Files (x 86) \Mozilla Firefox\updated\firefox.exe

    But there is no update file. This happens even when clicking on the firefox.exe file in the Mozilla Firefox folder.

    Is this normal? It does not seem right.

    Too bad. I restarted the computer and everything seems to be back to normal - firewall and the paths are now correct. Then. anyone having this problem - try to restart the machine. Never had that after a Firefox update before so don't think of him.

  • How can you recover files, folders, software and drivers after reinstalling windows xp family?

    original title: How can you recover files, folders, software and drivers after reinstalling windows xp family? Please help, I've lost everything!

    When the update Norton Internet Security 2009 to 2011 on reboot, windows cannot open.

    Root\systems32\hal.dll Windows prevented windows from opening.  My machine in a Dell dimension 8300.

    On a Dell website, I found a method of recovery if you can reinstall windows xp from cd.  I was able to do it, but lost all my files.  How can I recover all my fortune, images, software, drivers, etc.?  There must be a way to extract this information from the hard drive.  Any help is the material and can save my marriage!  Thank you.

    Hi MarkS_02127,

    Since you've reinstalled windows, you will need to re - install applications once again, you will be lucky (if you format the drive) data on your computer. You remember that location, it was in my documents? If yes it just open C:\Documents and settings and locate your old username, you will find your old desktop, Favorites and Documents.

    I hope this helps.

  • can't see the programs installed after reinstalling XP

    I just reinstalled win xp pro. All my programs are now empty when I click Start button and select programs. However, if I go to my computer then c then program files, everything is still there.

    How can I get these programs appear also in the start/programs menu?

    You did a parallel installation.
     
    Now, you will need to install all the programs from scratch.

    --
    Martin Stanley
    MS - MVP
    --
    How to ask Questions the Smart way
    http://www.CatB.org/~ESR/FAQs/smart-questions.html
  • How to remove programe files that remain in the registry after I uninstalled these programs?

    How to remove programe files that remain in the registry after I uninstalled these programs?
    I uninstalled Nero 8 on my system (Windows Vista Edition home premium, 64-bit dell 1737 studio system); but several Nero files are always stuck in my registry. How can I remove them without destabilizing the system? Thank you.

    Yes, Nero is a software that I hate. I liked Nero until 6 version, I think, but after the Version 8 and 9, it was pathetic.

    2 years ago I had uninstalled a lot of software and there were many many registry entries obsolete - when a search I found that a member of a forum on the Web recommend CCleaner.

    Used from 2 years - each time without making registry backups. He never did wrong with my two PC - Windows XP SP3 and Windows 7 SP1 (previously Windows 7 RTM).

    The registry cleaner is fantastic.

    In which case you can try it, here's the download link.

    WARNING: Installation be sure to uncheck the installation of Google Chrome options.

    CCleaner automatically prompts you to create backups of registry before she cleans up the registry. The choice is totally yours.

  • Acer files must be reinstalled after reinstalling windows vista

    I recently reinstalled windows and copied the files from acer on the d drive, so I wouldn't lose them. I need to reinstall acer arcade complete the multimedia suite both the empowering technology-acer but I was unable to do so. What should I do?

    Hello

    You may not copy the Program files to another drive like you "did".

    Programs need to be reinstalled from the original media

    If it's an Acer computer, they must be part of the process to restore Acer

    you don't say how you reinstalled Vista

    as they are Acer programs that are provided by Acer, Acer support

    http://support.Acer.com/us/en/default.aspx

  • How to uninstall vista delux home system, and then reinstall system without losing all the programs, files, etc. ?

    How to uninstall vista delux home system, and then reinstall system without losing all the programs, files?

    Hello

    You cannot do a clean install, which is what you hear in your question, and maintain programs

    programs will have to be reinstalled from the original media

    and you will need to back up your files:

    How to make a backup of your data

    http://www.vista4beginners.com/how-to-backup-your-data

    How to restore your files

    http://www.vista4beginners.com/how-to-restore-files

    ___________________________________________________

    You can make a good repair facility

    read the below tutorial on how to perform a repair installation

    http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  • Error message after you initialize computer error "Windows cannot find C:\Program Files (x 86) \Search Extensions\Client.exe make sure you typed the name correctly and try again.

    After that I turned on my computer, I get this error message... "Windows cannot find C:\Program Files (x 86) \Search Extensions\Client.exe make sure you typed the name correctly and try again."

    It all started October 1, 2014, and I have no idea why.

    I asked windows assistance online, and he said he had something to do with my registry.
    But then there just stop communicating and did not tell me how to solve this problem.

    Y at - it a registry repair tool?

    Also it does not affect my computer that I can tell.

    But I have a problem in which windows cannot detect.

    In the printers and devices window, the icon of my computer has a triangle with an exclamation mark inside error.

    Maybe someone out there not and I'd appreciate any help.

    Hey, mark

    First have you properly uninstalled this program? He was executed at startup of Windows an incorrect uninstall may cause this error may still be registered in MSConfig to start automatically with the computer.

    Did you go to the address specified in Program Files (86) \Search Extensions to see if the file is present or not?

    With a mark of exclamtion in the middle of a yellow triangle indicates that drivers must be updated.

    Right-click on the device with the triangle, select Properties, go to the Hardware tab, select the device with a triangle next to it, select Properties again and select Update driver.

    This should solve the problem, if Windows Update can't find a driver for you, you can always go to the manufacturers website and download it there, however, if the Windows Update does not find it there ' has a chance to the manufacturers Web site may not it as well, in this case, you can open Device Manager right-click the missing material or using outdated drivers, select Properties, go to the Details tab and in the hardware id select menu drop-down property search with id, you receive information about the device and so download the drivers the most up-to-date and appropriate from other reliable sources.

    Thank you

    -Robin

  • I lost my x 86 programs after reinstall family vista premium and windows 7 Upgrade on another, both are hp pavilloin, is it possible to recover them.

    I have 2 HP pavillion desktop that I lost the x 86 full programs files systems, 1 is a vista I had to reinstall using a set of discs purchased from HP, the other flag I did an upgrade from vista to windows 7. Both are 32-bit operating systems. It's very strange that the x 86 systems wet program files missing. Can someone tell me why this happened and how to get the x 86 systems back. I did the repair restoration and even did a complete reinstall with a new hard drive on windows 7. All programs go into 1 file and will work properly from there.

    Thank you, pop

    You are welcome.

    I'm happy to have helped.

  • How can I restore my icons on the desktop to backup files after reinstalling Win 7 Home?

    HD failure forced me to reinstall my Win 7 home page.  Fortunately, I was able to save before total chaos ensued.  (My set of files has been relatively low, so I did a copy/paste of my drive c: \.)  How can I restore my desktop icons in the backup files?

    Hi pb1313,

    Thanks for posting in the Microsoft Community. It seems that you try to restore the backup after reinstalling Windows 7.

    As you have copy and pasted the c drive visit this link if you want to manually transfer files ignore the title and see the steps mentioned in this link and check:

    How to restore a Windows 7 computer to a previous Windows installation by using the Windows.old folder

    http://support.Microsoft.com/kb/971760

    Hope this information helps. If you have any other questions feel free to respond and we would be happy to help.

Maybe you are looking for

  • Page up and page down keys do not work

    The Page Up, Page Dn keys is no longer usually work under 8.0.1 (using Dell laptop w/WinXP, no mouse). I tried to change the setting to 'hack' touchball in topic: config-1 to 0, but no change. The "arrows" seem less useful, but I've yet to understand

  • TOSHIBA HDD/SSD Alert - do I need if I have my laptop on a desk?

    Hello all, I guess my question is not on the HARD drive or the hardware itself, its subject the load or the process CPU usage alert hdd in my laptop. Fact it gives a heavy load for my memory?Someone at - he noticed your laptop to be a bit slower when

  • I need some intel driver hd for Pavilion 15 n204tx

    don't install Intel version of hd 10.18.10.3355 drivers. He said that this computer does not meet the minimum... requirement. My laptop is hp pavilion n 204 tx. and I'm using window 8 pro... Previously I was using window 8.1 and the graphics driver w

  • Cannot modify the properties file or Tags on .wav files

    Recently, I noticed that you cannot change the property information or the tag of the file on file .wav audio as you can do it on other types of audio.  Either using the file explore. change the properties or advanced in WMP11 tag editor, all the fie

  • My HP psc 1110 printer does not print the color pages by using the hotkey (F12) PRINT button

    I have window xp home system and the printer HP psc 1100 Series (HP psc 1110 precisely).  My problem is that when you use the dialog system (Ctrl + Shift + P set keys), it prints color pages; Whereas, when I use the button PRINT keyboard on the micro