Error: "Flight Simulator could not load some program files and will now leave." at the start of the game after installing the reduction acceleration expansion Pack.

Similar Questions

• I get this error "Flight Simulator could not load some program files and will now close" - does anyone know how to solve?

  I get this error "Flight Simulator could not load some program files and will now close" - does anyone know how to solve?

  Hello

  I suggest you to please follow the steps described in the following articles and check if it helps.

  "Invalid product key" error in Microsoft Games, MapPoint, or Streets & Trips

  http://support.Microsoft.com/kb/812467

  How to get a new product key for Microsoft Games for Windows, Streets & Trips, or MapPoint

  http://support.Microsoft.com/kb/973457

  Let us know if it helps!

• Could not load some site

  Hello

  I'm new to Mac and used the iMac for 4 months.

  Starting yesterday I noticed that some site are no load, while others are very well.

  I tried it with Safari and Chrome, and the result is the same.

  However if I restart in safe mode these Web site would work.

  If I reboot and return to normal mode, these site not load again.

  For Internet connection, I tried the cable and wifi and no difference.

  On the same network, I have another iPad and has no problem to access the same Web site.

  Tried with App Store, some graphs also have problems to load and some display a question mark.

  Welcome any comments or advice on the probable cause of the issue and how it can be solved.

  Me too same, same case! iMac, OS X El Capitan (10.11.3)

  Same problem after upgrade-> Safari, Chrome, Firefox, and App Store

  I realease 1--> only HTTPS works very well but accident of HTTP

  BTW, all internet applications work fine, I mean, if I use FTP (filezilla) work very well, if I use another app with internet connection WORKS FINE

  Only browsers in HTTP

  It s a shame

• SFC/scannow found but could not fix some corrupted files, how can I remove them / find them?

  Separated from this thread.

  Rob,

  Sincerely appreciate the info/advice.  I ran sfc/scannow and cropped the results to include only the unable to complete sections.  OK portions have been eliminated for practical reasons.  PC is a Vista PC with SP2 and all updates.  The antivirus program is run several times a week and has identified no virus/spyware/malware.  No other real problems with PC.

  2015-03-19 17:07:14, CSI Info 0000014 c [SR] beginning verify and repair operation
  2015 03-19 17:07:16, CSI Info 0000014 d [SR] cannot repair the military record [l:18 {9}] "Chess.dll" Microsoft-Windows-Shell-PremiumInboxGames-chess, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral public key in the store, file is missing "
  2015-03-19 17:07:19, CSI Info 0000014e [SR] cannot repair the military record [l:32 {16}] "PurblePlace2.dll" Microsoft-Windows-Shell-InboxGames-PurblePlace, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral public key in the store, file is missing "
  2015-03-19 17:07:19, CSI Info 0000014f [SR] cannot repair the military record [l:30 {15}] "PurblePlace.dll" Microsoft-Windows-Shell-InboxGames-PurblePlace, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral public key in the store, file is missing "
  2015-03-19 17:07:20, Info CSI 00000150 [SR] cannot repair the military record [l:32 {16}] "PurblePlace2.dll" Microsoft-Windows-Shell-InboxGames-PurblePlace, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral public key in the store, file is missing "
  2015-03-19 17:07:20, Info CSI 00000151 [SR] this element is referenced by [l:160 {80}] "' Package_65_for_KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18005.948465 - 240_neutral_GDR" "
  2015-03-19 17:07:20, Info CSI 00000152 [SR] cannot repair the military record [l:30 {15}] "PurblePlace.dll" Microsoft-Windows-Shell-InboxGames-PurblePlace, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral public key in the store, file is missing "
  2015-03-19 17:07:20, Info CSI 00000153 [SR] this element is referenced by [l:160 {80}] "' Package_65_for_KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18005.948465 - 240_neutral_GDR" "
  2015 03-19 17:07:20, info CSI 00000154 [SR] could not reproject corrupted file [ml:520 {260}, l:98 {49}] '------? "\C:\Program Files\Microsoft Games\Purble Place"------[l:30 {15}] "PurblePlace.dll"; source file in the store is also corrupted
  2015 03-19 17:07:21, info CSI 00000155 [SR] cannot repair the military record [l:18 {9}] "Chess.dll" Microsoft-Windows-Shell-PremiumInboxGames-chess, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral public key in the store, file is missing "
  2015-03-19 17:07:21, info CSI 00000156 [SR] this element is referenced by [l:160 {80}] "' Package_66_for_KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18005.948465 - 243_neutral_GDR" "
  2015 03-19 17:07:21, info CSI 00000157 [SR] could not reproject corrupted file [ml:520 {260}, l:84 {42}] '------? \C:\Program Files\Microsoft Games\Chess"\[l:18{9}]"Chess.dll; source file in the store is also corrupted
  2015 03-19 17:07:21, info CSI 00000159 [SR] verification complete

  2015-03-19 17:08:47, transaction Info CSI 00000187 [SR] beginning verify and repair
  2015 03-19 17:08:49, info CSI 00000188 [SR] cannot repair the military record [l:36 {18}] "ShaderCache.ps_2_0" Microsoft-Windows-WindowsSystemAssessmentTool, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral public key in the store, file is missing "
  2015 03-19 17:08:55, info CSI 00000189 [SR] cannot repair the military record [l:36 {18}] "ShaderCache.ps_2_0" Microsoft-Windows-WindowsSystemAssessmentTool, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral public key in the store, file is missing "
  2015-03-19 17:08:55, CSI Info 0000018 [SR] a the item is referenced by [l:158 {79}] "' Package_16_for_KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18005.948465 - 49_neutral_GDR" "

  2015-03-19 17:10:25, CSI Info 000001 c 2 [SR] repair 3 components
  2015-03-19 17:10:25, CSI Info 000001 c 3 [SR] beginning operation check and repair
  2015-03-19 17:10:25, CSI Info 000001 c 4 [SR] cannot repair the military record [l:32 {16}] "PurblePlace2.dll" Microsoft-Windows-Shell-InboxGames-PurblePlace, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral public key in the store, file is missing "
  2015-03-19 17:10:25, CSI Info 000001 c 5 [SR] cannot repair the military record [l:30 {15}] "PurblePlace.dll" Microsoft-Windows-Shell-InboxGames-PurblePlace, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral public key in the store, file is missing "
  2015-03-19 17:10:25, CSI Info 000001 c 6 [SR] cannot repair the military record [l:18 {9}] "Chess.dll" Microsoft-Windows-Shell-PremiumInboxGames-chess, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral public key in the store, file is missing "
  2015-03-19 17:10:25, CSI Info 000001 c 7 [SR] cannot repair the military record [l:36 {18}] "ShaderCache.ps_2_0" Microsoft-Windows-WindowsSystemAssessmentTool, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral public key in the store, file is missing "
  2015-03-19 17:10:25, CSI Info 000001 c 8 [SR] cannot repair the military record [l:18 {9}] "Chess.dll" Microsoft-Windows-Shell-PremiumInboxGames-chess, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral public key in the store, file is missing "
  2015-03-19 17:10:25, CSI Info 000001 c 9 [SR] this element is referenced by [l:160 {80}] "' Package_66_for_KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18005.948465 - 243_neutral_GDR" "
  2015-03-19 17:10:25, 000001 ca CSI Info [SR] could not reproject corrupted file [ml:520 {260}, l:84 {42}] '------? \C:\Program Files\Microsoft Games\Chess"\[l:18{9}]"Chess.dll; source file in the store is also corrupted
  2015-03-19 17:10:25, 000001cb CSI Info [SR] cannot repair the military record [l:32 {16}] "PurblePlace2.dll" Microsoft-Windows-Shell-InboxGames-PurblePlace, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral public key in the store, file is missing "
  2015-03-19 17:10:25, 000001cc CSI Info [SR] this element is referenced by [l:160 {80}] "' Package_65_for_KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18005.948465 - 240_neutral_GDR" "
  2015-03-19 17:10:25, CSI Info 000001 cd [SR] cannot repair the military record [l:30 {15}] "PurblePlace.dll" Microsoft-Windows-Shell-InboxGames-PurblePlace, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral public key in the store, file is missing "
  2015-03-19 17:10:25, CSI 000001ce [SR] Info this item is referenced by [l:160 {80}] "' Package_65_for_KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18005.948465 - 240_neutral_GDR" "
  2015-03-19 17:10:25, 000001cf CSI Info [SR] could not reproject corrupted file [ml:520 {260}, l:98 {49}] '------? "\C:\Program Files\Microsoft Games\Purble Place"------[l:30 {15}] "PurblePlace.dll"; source file in the store is also corrupted
  2015-03-19 17:10:26, CSI Info 000001 d 0 [SR] cannot repair the military record [l:36 {18}] "ShaderCache.ps_2_0" Microsoft-Windows-WindowsSystemAssessmentTool, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral public key in the store, file is missing "
  2015-03-19 17:10:26, CSI Info 000001 d 1 [SR] this element is referenced by [l:158 {79}] "' Package_16_for_KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18005.948465 - 49_neutral_GDR" "
  2015-03-19 17:10:26, CSI Info 000001 d 3 [SR] full repair
  2015-03-19 17:10:26, CSI Info 000001 d 4 [SR] validation of transaction
  2015-03-19 17:10:26, CSI Info 000001 d 8 [SR] check and complete repair operation. All of the files and registry keys listed in this operation were repaired successfully

  A few notes:

  (1) we will NEVER buy another PC with a trace of all 'games' that is, waste of space and time and a value.  Looking at the impossible to correct entries, they seem to be exclusively associated with functions of game without value.

  (A) we need to participate in this farce of a game or can simply be ignored without affecting

  legitimate operation/functions of the PC?  When close or restart, we get the error message

  0 x 0000142 failed to initialize properly... Other PC functions seem to work well.

  (B) is there a way to clean up the waste of space games so that would solve the problem

  without affecting the performance of the PC? (When try to remove the game worthless hoax,)

  It will not remove them). I know that some of the files 'source' for waste games

  missing.  Since NONE of them will ever by used, is there a reason to worry?

  Thanks in advance for your help.

  Gene

  St Paul, MN

  Hello

  This note at the end:

  "2015-03-19 17:10:26, info CSI 000001 d 8 [SR] check and repair the Transaction."
  completed. All of the files and registry keys listed in the operation have been successfully
  "repaired"

  Run a Checkdisk just to be sure and rerun the SFC.

  Run checkdisk - schedule it to run at the next startup, then apply OK your way
  outside, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  You can ignore the problems of game but if there is ever, all you are concerned about
  then you can extract the files from the Vista DVD or even to make a upgrade in Place or repair
  Installation

  Access files on your Vista installation DVD
  http://www.Vistax64.com/tutorials/86959-access-Vista-install-DVD-files.html

  How to extract system files missing from the DVD of Windows 7/Vista.
  http://blog.NirSoft.NET/2009/09/17/how-to-extract-missing-system-files-from-the-DVD-of-Windows-7vista/

  --------------------------------------------------------------

  You can try a repair install or an upgrade in Place.

  You can use another DVD that aren't copy protected but you you need to own
  Product key. It must be the same version 32 or 64 BIT Vista OEM. Also the system
  machine to usually sell the cheap disk since you already own Windows. Don't forget to make a
  good backup or 3 (security in redundancy).

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Vista won't go dormant and error related volmgr (could not load the crash dump driver)

  Hi all

  
  

  I've been using Vista for a couple of years and for some reason any yesterday he began to refuse to go to sleep.  I did not any changes to the system or ran updates until this happened (I'm not on Sp2, just under the security updates every now and then).  I checked the Device Manager to see if the network card has been to reactivate, but this was not the case; I also disabled the mouse of this awakening, and that did not help either.  I told him to go to sleep, and he wakes just in 1 to 5 seconds.  I checked event viewer and noticed that whenever I put him to sleep, I get volmgr error: "the system could not sucessfully load the crash dump driver.  Going back through the events, this error has not appeared before, so I guess that it is connected to the computer doesn't go to sleep.  Any help would be appreciated, thanks!

  Here are the details of the error:

  
  

  -

  -

   

    45

    2

    0

    0 x 80000000000000

   

    152547

    System

    Sebastian-PC

   

   

  -

    \Device\HarddiskVolume3

    0000000001000000000000002D0004C004200000430000C000000000000000000000000000000000

   

   

  Hi Sebas-82,

  I suggest that you update the driver for graphics card on the computer and check if it works.

  How to upgrade the graphics card on the machine driver
  
  1. click on Start, click Control Panel, and then double-click System.
  2. click the tab hardware , and then click Device Manager.
  NOTE: If you are prompted for an administrator password or for confirmation, type the password, or click continue.
  3. click on the graphics cards to develop.
  4. under display adapters, double-click the entry for your graphics cards, and then click the driver tab.
  5. click on Update driver software.
  6. follow the Wizard update driver to update the driver graphics cards.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  If updating the driver fails, then uninstall and reinstall the latest driver for the video card by downloading from the website of the manufacturer of the system.

  Also see the Microsoft kb article below.
  Windows Server 2008 or Windows Vista Service Pack 1 - systems do not generate a dump file if the system partition is a mirrored volume
  http://support.Microsoft.com/kb/958933

  If the previous step fails, then you need to update the motherboard chipset drivers by contacting the manufacturer of the computer.

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• SFC/scannow errors found but could not fix some files corrupted,

  Greetings! my windows Explorer still crashes so I tried to search this site for possible answers to my problem, I found one by sfc/scannow, I tried to find some probs then we found that my file explore was corrupted. It's fixable without reformat my OS?...
  How?
  I have a 64-bit windows 7 ultimate service pack 1 System. Thanks in advance for help Microsoft Community!
  Here's the part of my report sfcdetails.txt log:

  2016 01-25 14:53:05, info CSI 00000088 [SR] cannot repair the military record [l:24 {12}] "explorer.exe" from Microsoft-Windows-explorer, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2016-01-25 14:53:05, CSI Info 0000008a [SR] cannot repair the military record [l:24 {12}] "explorer.exe" from Microsoft-Windows-explorer, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2016-01-25 14:53:05, CSI Info 0000008b [SR] this element is referenced by [l:202 {101}] "Microsoft-Windows-Foundation-Package ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.1.7601.17514.WindowsFoundationDelivery '.
  2016 01-25 14:53:05, CSI 0000008e Info [SR] could not reproject corrupted file [ml:520 {260}, l 28 {14}] '------? \C:\Windows"\[l:24{12}]"Explorer.exe '; source file in the store is also corrupt.

  In safe mode and clean the boot, what was the results?

  Do you have the Windows 7 DVD?

  Follow the steps in the following Microsoft Support article:

  8.1 Windows, Windows 8 or Windows 7 hangs or freezes

  Warning before you perform these troubleshooting steps:

  System Restore: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  Disk check: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Security scanner: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Also, try the steps in the following Microsoft support article:

  Optimize Windows performance

  Please post back with the results and the information requested, we will be happy to help you further.

  ___________________

  Thank you best regards &,.

  Isha Soni

• Error code:-17004, could not load DLL or library

  Hi all

  I get the following error message:

  Error loading step 'x' sequence 'MainSequence' in the file 'y '.  Unable to load DLL or external library C:\bin\driver.dll

  Error code:-17004, unable to load DLL or library.

  ' Source ' THOMAS '.

  My main DLL is one written in C in LabWindows.  This DLL calls a second DLL written in Visual C++

  I use TestStand 2010 SP1 as well as LabWindows/CVI 2010.  I have Windows XP Professional SP3.

  This same sequence, DLL1 and DLL2 worked together in previous versions of TestStand!  All I did was upgrade from Developer Suite 2011... ???

  I have reviewed all the messages about this problem and have so far done the following:

  1. check the two DLL1 and DLL2 reside in the same directory

  2 copied DLL2 in C:\Windows\system32

  3 used the Dependency Walker tool to check that there are no other missing DLL

  4 uninstalled Explorer 8 and install Explorer 7 because of something I've seen depends on and something that I read while researching this problem.

  5. check the search directories in TestStand

  I am out of resources, because I can't determine what the problem and any suggestions would be welcome

  You have the correct version of the runtime visual C on this machine? If it is a debug version of the dll you need a debug version of the visual C++ runtime. If you have not visual studio is installed it is unlikely to be installed on your machine.

  You can open the dll in visual studio and look in the dll resources to see what version of sxs dll it is linked with the manifesto. You must make sure that it exists on your computer. Depends on generally should show a problem if that's the problem, however.

  Hope this helps,

  -Doug

• Could not find some programs in "uninstall a program".

  Hello

  I tried to uninstall Skype to install a newer version, but I can't find it in the control panel under the option "uninstall a program". Now, I realized that any program I have installed before 2014 will not appear. That is to say that I don't have a number of programs installed when I know that I have a lot more actually installed. I'm not really familiar with computer terminology so can you please help me out in simple terms?

  Thank you very much

  Andrea

  You could try this utility troubleshooting file.  This diagnostic will scan and try to resolve the problem:

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

• SFC/scannow found but could not fix some corrupted files

  Hello

  Today, I tried to install the update package 'Microsoft Visual Studio 2010 Service Pack 1', but unfortunately she didn't... Then, I wanted to check my operating system with SFC/scannow and discovered that some files are corrupt.

  I would like to know if anyone here can check the log and can tell me what files are important and if there is serious damage. I do have to know how to analyze these logs, but I don't know what needs Windows or what.
  https://rapidshare.com/files/4272859726/CBS.7z

  Thank you!

  Hi Maik,

  I suggest that refer you to the link that talks about the determination of the log files and how repair/replace files.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/SFC-SCANNOW-detected-some-corrupt-files-unable-to/aef21425-6530-464a-A18D-a4d21449aa82?page=1

  Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  For more information, see the link.

  How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista

  Note: Applies to Windows 7

  Let us know the results. We will be happy to help you further.

• Error: Windows backup could not create a zip file.

  I installed Windows 7 RC.  Installation went well, system runs quickly with no problem except when I try to perform a backup.  Seems to work at the end of the backup, and then fails with the error message «Windows backup to create a zip file» could not  «This could because the reader what is installed on Windows isn't a not enough space or it could be a temporary error.»  Make sure you have at least 400 MB of free space and try again' drive Windows is installed on has 163 GB of free space.  I tried several time backup on a separate internal drive > 300 GB of free space and a NAS drive (> 1.5 TB of free space with the same error message).

  Hi mhgreene,

  Thanks for posting "Preparation for Windows 7" community forum.

  Of after the information provided which happens usually not, is that the system tries to write to the partition recovery or diagnostic partition instead of the C:\.  You can confirm the backup partition is written is done to partition the drive, and you want the backup to reside.

  Let us know if this helps solve the problem or if assistance is needed.

  Debbie
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error C80003FA Windows could not search for new updates and error 8E5E0442

  Windows 7 home premiumn

  After formatting the hard drive (deleted and then recreated the partitions), I wasn't able to install 5 of 19 recommended updates security for my computer

  has no updates errors
  Update for Windows 7 for x 64-based systems (KB976264)

  I tried the recommended tools, but they also gave me an error. Setup has encountered an error 0x80003fa

  the downloaded Microsoft Security Essentials

  other updates that were unable to be downloaded are:

  KB978637

  KB974431

  KB978251

  KB977074

  I noticed on the night of March 18 my disabled provided Desktop Manager does not allow me to take advantage of the tool great for what I brought this machine.

  Please open a free support for any technical assistance incident & let us know what progress you make with Support MS. good luck! ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Could not load itunes on my computer, it sends a message "the system administrator has set policies to prevent this installation" help!

  message: the system administrator has set policies to prevent this installation

  Use the program below to uninstall iTunes, if you have an installation prerequisite/corrupt iTunes installed

  Once you do this, redownload / save it on the desktop > right click on the setup.exe > run as Adminhttp://www.snapfiles.com/reviews/revo-uninstaller/revouninstaller.html

  Cleaning of Revo Uninstaller and uninstall utility

  Revo Uninstaller is an uninstall utility that includes additional cleaning of system tools. It provides an alternative interface to the Windows Add/Remove Software dialog box that offers web search options, access to registry keys and some additional commands. The program also includes a Manager start to inspect and disable programs that start automatically as well as a filter to eliminate the traces of the Internet, a secure removal tool and an option to search for and remove files, folders, and registry keys that have been left during uninstall of privacy. Revo Uninstaller comes with a unique "Hunter Mode" that allows you to uninstall a program, search for more information on the web, or perform other actions by simply dragging a target on the program icon or a shortcut on your desktop.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Any other problem iTunes, contact Apple with their software:

  http://www.Apple.com/support/iTunes/

  See you soon.

  Mick Murphy - Microsoft partner

• I made a custom Windows installation 7 and could not back up program files. Is it possible to recover?

  Drive C: 179 GB is almost complete and the recovery drive D; is also half full.  If all of these data are still there is anyway to recover the program files?

  Check the root of the system drive where Windows 7 is installed. There should be a folder called Windows.old likely to always have your personal files. Of course, you need to reinstall all your applications and drivers:

  You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

  http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

• Windows will not load some programs giving the error message below.

  I get an error message directed ONENOTEM. EXE - bad Image. In the box under the heading of the message says C:\Windows\system32\WSOCK32.dll is not designed to run on Windows or it contains an error. What should I do to fix this

  Open an administrator command prompt (right of the mouse / run as administrator). Type sfc/scannow. It can replace WSOCK32.dll

• Error code 39, could not load the driver for my cd/dvd device.

  I tried the advice of troubleshooting, uninstalling and reinstalling, but it does not fix it.  I think that the driver on my computer is corrupted.  I can't get the original driver from the CD provided with the computer... because the CD player does not work... so... can Ow I get the driver to try a new?  And exactly how to load this driver?

  Here are the specs of the drive: TSST corp DVD + RW TS-H653B

  Driver version: 5.1.2523.0

  Please help, trying to install a new printer and cannot do without my CD drive... ack!

  Thank you

  Hi RhonBB,

  You can follow this link & check if the problem persists.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.