After restarting windows and then no error in config/system is finally windows starts successfully with no problems quo. __
"windows couldnot start because the following file is missing" c:/windows/system32/config/system.
This message appears at the first start, but when I press ctrl + Alt + Delete, restart windows and then no error in config/system does finally come windows starts successfully without problem usually. I searched on the internet that all solutions are given if windows XP does not start. But in my case after restart only a single window loads successfully. I'm dubious before using the recovery console.
Please help everyone,
no case I found the solution to this particular problem.
The question was preceded by a loss of power, aborted reboot or abnormal termination? (This includes pulling and buttons power).
These can cause corruption in the file system that must be fixed before you do anything else. If none of these events occurred (or even if they have not taken place), you must verify the integrity of your file system before anything else (especially "try" things).
Never, never, never start with the support engineer technical 'expert' who are hired by Microsoft to implement the KB307545. You are likely to be in for a frustrating waste of time and might just make things worse.
Always, always, always start with a chkdsk with first error correction.
Tags: Windows
Similar Questions
-
Windows mail - error and the same letter over and over again.
When I open Windows mail, I start to get the mail and I get it about 474 243. And then an error saying Windows mail will be closed because of an error. And I start it again and I get the SAME email AGAIN, and again, it stops somewhere and closes.
Anyone know what could be the problem?You can try to set up a new e-mail account and use the exact settings of the account that you have now. This way, you will have a copy of the same account. Then see if it has the same problem. If it works and is not old, and then see if the old man works after this and remove one of them, if you do not receive the messages in doubles.
If the new copy of account has the same problem, then it's a stuck message and your courier company should fix this.
Steve
-
I have already installed creative cloud and illustrator (trial) but when I turn on the computer and restart windows, it fails with error code 16 and need me to remove the program, and reinstall.
Need help.
Hello
Please see the link below.
Hope this will help you.
Kind regards
Hervé Khare
-
Outlook express won't come through
My outlook express won't let emails through. I am getting an authorization and then an error will appear. Sometimes it will say: reception of messages, but none will come by. A box appears and says that he put an end to the connection, maybe because of the connection to the server, the long period of inactivity or network connection. Also, I get a message on and which was completely removed several times on the file inbox and delete. I have no idea how to solve this problem or what I did to make it. I've never experienced this before.You probably have the widespread corruption of dbx files. Try in a new identity.
File | Identities | Add the new identity. Create a new one and try it. If all goes well, you can import your messages and address book from the old identity and delete it.
Note: Do not use the main word in the name of the new identity.
In addition, follow these guidelines to help avoid this in the future.
Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.
Information on the maximum size of the .dbx files that are used by Outlook Express:
http://support.Microsoft.com/?kbid=903095After you're done, followed by compacting your folders manually while working * off * and do it often.
Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.
Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the processors and causes a multitude of problems such as time-outs and account setting changes. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
http://www.oehelp.com/OETips.aspx#3And backup often.
Outlook Express Quick Backup (OEQB Freeware)
http://www.oehelp.com/OEBackup/default.aspx -
Try to install the update for creative cloud and it gets to 43% and then says error code: 50
N ° 1)
Leaving Adobe Creative Cloud application and put an end to all the Adobe Task Manager process / Activity Monitor [mac].
Step 2)
Uninstall Adobe Creative Cloud using Creative Cloud uninstaller.
https://helpx.Adobe.com/creative-cloud/help/uninstall-creative-cloud-desktop-app.html
Step 3)
Reinstall the Adobe Creative Cloud application:
Windows: https://ccmdls.adobe.com/AdobeProducts/KCCC/1/win32/CreativeCloudSet-Up.exe
Mac: https://ccmdls.adobe.com/AdobeProducts/KCCC/1/osx10/CreativeCloudInstaller.dmg
-
I work in the field environment.Some VB 6 EXE compiled on the server (MS Server 2003) files does not work after restarting Windows 7 PC (shortcut to the server).but it runs on the Windows XP computer.For example:-Inventory.exe (work), Sales.exe (does not work)Help, please.
Hello
I suggest you to ask your question at the following link.
http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/
I would also ask you to contact your IT Department for further explanations.
-
If I buy 1 annual contract with monthly payment app am I then linked throughout the year, or can I cancel after 3 months and then not pay the rest of the year?
I found the answer myself via chat. the answer is Yes, you can cancel, but you must pay 50% of the remaining months of the annual contract
-
How do I renew my student account teacher after switching schools and then leave the account expires because of the inability, resulting to check?
You will probably need to get approved again if the post for which you have been approved initially is no longer applicable.
For more information about the provisions of the student/teacher, you can refer to the following information page:
http://helpx.Adobe.com/x-productkb/policy-pricing/Education-FAQ.html#main_submit_poe
Another good resource for information is the student and teacher edition information forum:
-
Hello.
I'm having trouble installing my Photoshop CS3 software.
I use a PC. My computer recently had a virus and the it consultant all deleted and reinstalled Windows Start program with all updates. My operating system is "Microsoft Windows 7 Home premium 2007 - with updates added.
The version of photoshop that I have is 'Adobe Photoshop CS3, 2007. I installed Photoshop CS3 which seemed to install properly. I activated the dics and inserted the serial number. Activation complete. I had a problem with the registration with the following message through "a problem has been experienced so he was trying to send information on the internet". I had a problem with look at a. CR2 file but I got a converter of Microsoft 'CameraCode '. I can use Photoshop software. I can't use a software link with Photoshop CS3 I was using before. It's "NIK software - Silver Efex Pro". This means that on the section "filter Photoshow. Can I use the software, but it does not save the changes I made. When I turn off the computer Photoshop CS3 is deleted from my computer. I got LIGHTROOM but software that works very well.
The summaries. I can load Photoshop and use and save the changes, but when I turn off my computer the software is removed from the hard drive. But I can't get the link software - Nik software - Silver Efex Pro. Please can you advise me what I should do to get my software working properly again.
Thank you.
Keith Fernandez
Once the software is installed, it will not be removed under normal circumstances.
I do not know if your computer is still infected and it is removed or the problem is that you can't 'see' photoshop' but it is always installed.
to verify this, check the installation directory and check its size on your hard drive.
-
Hello.
I'm having trouble installing my Photoshop CS2 software.
I use a PC. My computer recently had a virus and the it consultant all deleted and reinstalled Windows Start program with all updates. My operating system is "Microsoft Windows 7 Home premium 2007 - with updates added.
The version of photoshop that I have is 'Adobe Photoshop CS3, 2007. I installed Photoshop CS3 which seemed to install properly. I activated the dics and inserted the serial number. Activation complete. I had a problem with the registration with the following message through "a problem has been experienced so he was trying to send information on the internet". I had a problem with look at a. CR2 file but I got a converter of Microsoft 'CameraCode '. I can use Photoshop software. I can't use a software link with Photoshop CS3 I was using before. It's "NIK software - Silver Efex Pro". This means that on the section "filter Photoshow. Can I use the software, but it does not save the changes I made. When I turn off the computer Photoshop CS3 is deleted from my computer. I got LIGHTROOM but software that works very well.
The summaries. I can load Photoshop and use and save the changes, but when I turn off my computer the software is removed from the hard drive. But I can't get the link software - Nik software - Silver Efex Pro. Please can you advise me what I should do to get my software working properly again.
Thank you.
Keith Fernandez
Hi Keith,
You won't be able to re - install using the discs and the number of series that you used initially, but we have a solution.
The activation for more server CS2 is no longer in service. For this reason, we did a version of these titles of software available that doesn't require activation. This is for users who already buy the software. For more details and specific links for the software, please see the following link:
Activation server stops for Creative Suite 2 and Acrobat 7 product Macromedia
Instead of your old serial number, use the one shown next to the download link: download Acrobat 7 and CS2 products
Guinot
-
No sound in windows after Eula download and cannot defragment error not draggable
No matter what I tried to do research on my E - 310 Dell Deminition under his, it is blocked by this thing, and I have no idea what or where he comes. I can't delete it or if I can defragment my system and he at a stand still. I am still able to login. My firewall are all ok? What can I do? Kat Williams
OT: Microsoft Download "EULA" on my computer windows pro now, I have "no sound and cannot defragment not draggable error? Heelppp!
Hello
1. what operating system is installed on the computer?
2. What is the accurate and complete error you get when you try to remove or defragment?
3. What do you mean "she is blocked by this thing and I have no idea what or where he comes. I can't remove it '?
4 EULA which have you downloaded?
5. what you are trying to delete?Method 1
For the problem with the sound I suggest you try the steps from the following link:No sound in Windows
http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-WindowsMethod 2
Step 1: I suggest to start the computer in safe mode and check if you can remove or defragment.Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-modeStep 2: If the problem is solved in safe mode, then I suggest you perform the clean boot and remove the program that is causing the problem.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135Note: Follow step 7 clean boot KB929135 article to reset the computer in normal mode.
See also the suggestion of Halima S replied on April 15, 2010
http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/cannot-defrag-computer/8cb77216-8c20-49A2-a2ab-0e76d442f2ba -
Windows 7 service pack 1 is 18% full and then the error Code is 80200053
I tried to download and install the new update for windows 7, but I get an error every time. It's Windows 7 service Pack 1 for x 64 systems (KB976932). He gets 18% full and then said he could not be updated. The error Code is 80200053
I had this exact question and until I went under optional updates and installed the patch KB2285068 (Microsoft SQL Server 2008 Service Pack 2) and KB2488113 (certain day of random reliability), the Service Pack 1 update has failed every time. Once the updates have been applied SP1 successfully installed. I am on Windows 7 x 64. Someone at - there still the difficulty that should give a try.
-
Error in dictionary of fonts Adobe after effects CC and then crashes... Help
I recently installed adobe after effects CC and I can't use it.
I have a windows 7 pro 64-bit system.
I get the following errors and tried for installation of re - install and remove adobefnt files
nothing seems to work at this stage. Someone knows how to fix this problem for good?Thank everyone in advance!
Errors in the order of screen shots as they come to the top
Hello Travelander,
Welcome to the Forums. As Mylenium has already indicated that the issue could be with the permissions, you can try to run the program as administrator and check if it opens upward.
Concerning
Anand
-
I am running windows vista and when he began the download of an update that it crashed and now when it turns on, I get the blue screen. After trying to repair it using the wizard, he finds nothing, so I try to the motor pump reinstall my computer from scratch disks but just comes up with an error immediately. also, I tried using f8 when it lights up and the attempt to restart from the last successful boot but this also fails and also turn off automatic restart after that accident fails please help.
Hi paulspeedgun,
Blue screen errors you get point of hardware failure or an incompatible driver. Have you recently installed a new hardware? Below are troubleshooting steps to resolve your problem. Try each method until your problem is solved.
-Disconnect all hardware devices on the computer and then restart to see if that solved the problem.
-Restart your computer and immediately press theF8 key until you reach the Advanced Startup Optionsmenu. In the menu, select Safe Mode and perform a System Restoreto restore your computer to a date prior to this issue.
-Restart your computer and immediately press theF8 key until you reach the Advanced Startup Optionsmenu. In the menu select Safe Mode with command prompt , type chkdsk /r to check the integrity of your hard drive. Make sure you have all the important data to backup to a backup.
-Insert your Windows disk and restart your computer from the disk. Clickrepair your computer, Next, select the operating system you want to repair and clickNext. Select The Windows Memory Diagnostic tool to check the consistency of your memory. Let this test for a few hours for best results.
Dena
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Unable to connect to Analytics after restarting windows
Hello
I installed OBIEE 11.1.1.5.0 successfully on my 64-bit windows 7.
Follow these steps...
1 install the Microsoft Loopback adapter
2 created BIPLATFORM and SDM metadata Oracle XE local repositories, using the repository creation utility
3. follow-up of more than process one hour of installation of middleware/weblogic and applications of BI...
4A was able to connect to http:// < localmachinename >: 7001/analytics using the user 'weblogic' by default, see the dashboard sample etc..,.
5 has been able to connect to OBIEE administrator using the same 'weblogic' user and the password for repository "Admin123"...
So far so good..
However, when I restart my computer after installing, am not able to connect to one of them. Make me the ' chrome cannot connect to the webpage http://xxxxxx:7001 / Analytics "or" IE cannot display this webpage "error.
To be sure, I Redid the same installation on another computer of windows7 64-bit and the same error occurs. i.e., am able to connect to the analytical page after installation, but when I restart the machine... can't connect to the Web page is displayed...
I checked the services and yes the ' Oraclec_oracle ~ 1_oracle ~ 2c_oracle_mw_instances_instance1ConfigurationManager' service is running.
There is an additional setting that I should consider? PL. help.
Thank you.Hello
I just wanted to confirm you that you did. After the reboot of the machine, have you started the OBIEE Server also located on the Weblogic Server. Since start-> all programs-> Oracle Business Intelligence-> Start BI Services. This real will start the OPMN Services and then start the actual server in OBIEE. OBIEE server is one that has Analytics, xmlpserver modules etc. deployment.When you click Start the Services of BI, command below is executed. There is an xml file that has all the tags to start, stop, etc.
C:\Oracle\Middleware115BI\instances\instance1\bifoundation\OracleBIApplication\coreapplication\StartStopServices.cmd start_all
Once the server is completely started, it will automatically open a browser page also. But make sure that the server is started, completely, without any error. DO NOT CLOSE this window. If you close it, server will be stopped.
Thank you
Ravi Jegga
Maybe you are looking for
-
How can I remove an account from a computer profile without deleting data?
Hello! I want to delete mozilla of a computer and delete my account profile so that all my data on this computer is removed. But I use the same profile in mozilla on a different computer and I do not know if my profile will retain the data stored on
-
Satellite 5200 903 - how to enter the BIOS Setup
Hello, ive got a S5200-903 Satellite and I have to reinstall my Windows XP. But I am not able to get into the Bios, please tell me how.
-
Need a few drivers for Satellite A10 S811
Satellite A10-s811 multimedia audio driver & driver PCI modem.Thanks for the review.
-
How to get a preview of the file word on the front?
Dear all I need to get a glimpse of the word file in my fron Panel. But when I use active X control and web wrowser like this topic click ON file is open with Word, but I want to get a preview using LABVIEW? Can you give me some advice and STI is pos
-
Microsoft Antivirus 2009 Web Scanner - legitimate?
De : Billy K Question: "A couple of times in the last two days, I get a Microsoft Antivirus 2009 Web Scanner" message, telling me that I have Trojan virus and download a program to get rid of him. is it legitimate?--Willy K