After selecting an area and the application of fill, where the "done" or "Tick" to remove the moving dotted line?

Cmd - H show/hide extras, deselects cmd - D.

Tags: Photoshop

Similar Questions

Photoshop CS4. When I use the marquee selection tool, I lose the moving dotted line as soon as I take my finger on the mouse! Help.

Why my Rectangle selection tool outline does not disappear when I release the mouse button? This just started happening.

Research has done is you turn off your GPU (Preferences > Performance) .He often solves the problem with CS4. If this is the case, you might consider an update of it.

Elliptic unit not the moving dotted line showing or let me remove the section

I am trying to use my elliptical tool to cut an oval shape of a photo. I understand the process and have not had a problem in the past. I'm on the right layer, but when I drag my tool in form/area I want, it does create a mobile dotted and it will not allow me nothing to do with this area. Other times, he simply removed the picture completely, leaving a hole in the section I need. I went so far as reseting my default settings. Help?

Hi Patti,

not to apologize to be familiar with Photoshop we are all beginners at some point.

Right-click on the elliptical selection tool and select Reset all tools like that.

Reset preferences can sometimes be difficult. You will know if it works as a dialog box appears when you start Photoshop that prompts you to delete the file. If you do not dialogue try again because it may be a matter of being fast enough.

Restore the options popup after selecting "Non-action" and choose to use this option, whenever a device is plugged in USB?

Restore the options popup after selecting "Non-action" and choose to use this option, whenever a device is plugged in USB?

Hello

Did you follow the "AutoPlay Repair Wizard"?

You can follow the link provided in the previous post. Later, check to see if the problem persists.

Hope the helps of information.

My screen goes black and the start menu does not load after start up logo and the only thing on the screen I see is my mouse pointer

My screen goes black and the start menu does not load after start up logo and the only thing on the screen I see is my mouse pointer

Hello

You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
on devices and UNINSTALL - REBOOT.

Another method to try to get to the desktop (try in normal Windows Mode without failure)
CTRL + ALT + DELETE and on the tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - then
on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
by tapping F8 as you start several times.

First check this thread in case it is simple and if not to come back to this thread.

http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
That there is no information on a black screen as it is on a blue screen just adds to the
Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
Google to see the proposed repairs, whom some have worked however these cover a wide
field efforts.

Here's a video of one of them.

http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

Here's another fix
http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

You have a Vista disk? You can try restoring the system to it. If you do not have your system disks
manufacturer will sell them at low prices. Or try in safe mode if you can get there.

How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

You can create a recovery disc or use someone even version (to do the system restore there only to)
being bootable).

How to create a Vista recovery disk
http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

------------------------------------------------

These require the correct Vista discs since you can not start safe mode.

Try the Startup Repair tool-

This tells you how to access the System Recovery Options and/or with a Vista disk
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

Try recovery options Startup Repair

How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.html

-----------------------------------------------

Here are a few Google searches where many have found different solutions:

Vista black screen - check that a 1st
http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

Vista black screen Solution
http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

Vista black screen Fix
http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

-----------------------------------------------

If necessary and you can access all ordinary Windows.

You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.

You can use another DVD that are not protected but you will need to copy you have the product key.

On-site upgrade
http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

If nothing works, you can make a repair facility that must save the data but you will need to
Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
need to know your product Code.

This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

How to perform a repair for Vista Installation
http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

---------------------------------------------------------------------------

Another method that works sometimes: at the command prompt, type of Vista startup disk:
(type in a single line or copy / paste a line at a time and then press enter - type no parenthesis)
or "BOLD")

c:

cd\

CD c:\Windows\System32\winevt (there is a space between cd and C :)

Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

RESTART Windows

I hope this helps.

I hope this helps.
Rob - bicycle - Mark Twain said it is good.

I am trying to download Photoshop CS 5 installation stops because I was invited to turn the Notifications of Safari and SafariCloudHisto. I don't know what they are and the places where to disable them. Help, please. I use a macbook pro.

I am trying to download Photoshop CS 5 installation stops because I was invited to turn the Notifications of Safari and SafariCloudHisto. I don't know what they are and the places where to disable them. Help, please. I use a macbook pro. How can I find the Notifications of Safari and SafariCloudHisto?

Guest of installation of close SafariNotificati

https://helpx.Adobe.com/Acrobat/KB/install-prompt-close-safarinotificati.html

Problems with sorting of columns and the number of lines in the report
Hello

I'm having a problem with sorting of columns and the number of lines displayed in a report.

This report displays the data correct, but if I try to sort on a column when I click on the column heading in the report returns no line... I need to click on the "go" button to refresh the report (with the column sorted now) in to display the data.

Similarly, I display only 15 lines per page. If I try to view the lines 16-30, 31-45, etc., that it returns no line until I click on the 'go' button to refresh again.

Has anyone else had (and overcome) the same problem?

Thank you

Joseph
Joseph,

2 questions:

1) are you using the elements referenced by the report page to filter etc.. ? If so, you're failing values of these when the loading of the page?
(2) are you using PPR page through the results?

If so, it could be a problem with the different types of session state, as Anton Nielsen blogged about here:
http://c2anton.blogspot.com/2008/12/Oracle-Application-Express-Apex-three.html

If so, you can use calculations or processes to set element values in session state persistent during page rendering, as Anton mentions. In this way, when you use PPR page values will be available in session state and your report should work fine.

Anthony.

Unique path to the path dotted line?

Hello Experts!
I went out of my Illustrator graphics to a strawberry of trade by exporting to SVG. Paths of dictate cuts.
I would like to simulate a fold makes its way in dotted lines without having to hand draw each dash in the path.
With the help of Illustrator CS4, how can I create paths clean single dotted line of continuous paths with the applied dotted line?
If I use the dotted with hierarchical path (on a loop not closed), I find myself with rectangles (as the dotted line has a width to it).
Thanks for all the ideas.
Richard

Rix,

You can:

(1) create a short path, the length of the dashboard (you can use the online tool);

(2) in the brushes dialog, check create new brush and check model brush, defining the spacing on the length of the gap and keep Stretch Fit checked (you get a slight change of lengths); Now you have a brush to dashboard;

(3) apply to the Dash brush for paths in question;

(4) object > decompose the aspect to create paths separated from short simple as dashes.

I received an error message after installation encyclopedia British and this application cannot be open.showing the "Startup MFC application has stopped working". How can I solve this problem?

I received an error message after the installation of Encyclopedia Britannica and this application cannot be open.showing the "Startup MFC application has stopped working". How can I fix this?

Hello

always check the compatibility of vista programs on the link below

http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

If a program is compatible with vista you can try right click on the setup.exe and then by selecting run as administrator to install it

It is not compatible with vista, you can try running it in a previous operating system mode

This does not work for all programs

read the information below

http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

____________________________________________________________

and read this information MS, too

http://Windows.Microsoft.com/en-us/Windows-Vista/start-the-program-compatibility-Wizard

"animate the edge - exception error" (type of red, red area) and the application does not open

Hello

I hope that someone can help me... I'm not sure how to explain the situation, but when I try to open Adobe Edge animate, this error box "edge animate - Exception ' if poster, (see below), then the program closes unexpectedly. I can't say the words that it has the red type on a red background.
I uninstalled the program and reinstalled and the same error.
I'm new on this app, so I have no idea as to how to solve this problem.
I hope someone can help me, I know it's short so feel free to ask me any other questions.
Thank you in advance,
Tom

Hi Tom

It's very weird and not reproducible. What is the entire message that you get on the crash? We look at it. Even if we don't exactly understand the problem, can you please try to delete the preferences and restart the application. (Preferences are found in /users/animate Library/Preferences/Adobe/Edge). Please delete the Directory Board animate in the path and start the application. If the application still crashes, please send us the full journal report you get. We will try to solve the problem as soon as POSSIBLE.

Thank you for your patience

Dieudonné

Selection of scene and the PS3 with XBR65X900A

Just upgraded my PS3 firmware and now when I select using my TV remote and sync Bravo it controls sensors to 'Photo select scene' and I hear no image, just my PS3. When I go to contol - Options - select scene TV, the only option I have is the picture. All other selections are grayed out. My PS4 works correctly, as does my FMP - X 1 and DirectTV Saturday.

PS3 using HDMI 3 input

PS4 using input HDMI 3

DirectTv via HDMI 1 input

FPM using input 4 HDMI

PS3 and PS4 HDMI signal transmitted through Sony receiver.

Any ideas?

Thank you

Bob

Update:

Not swapped the rec HDMI cable Sam passes to 1 HDMI XBR still no picture and the stage select switches to Photo, all others grayed. Different cable entry not using different HDMI does not Barvo Sync. Result I can't get no picture from my PS3 to my XBR65X900A. Worked before the upgrade of the PS3 this morning...

OK, I found the solution... Press and hold the power button on PS3 for about 10 seconds. You will hear a beep and a Setup program appears to set up the HDMI cable. Instuctions to follow and which will give you the video output to your HDMI cable.

Sorry for the confusion but, I thought that it was a function of the XBR65X900 while I posted here. Maybe this will help someone else.

Bob

Acer Aspire its problems after Win 7 Pro and the new installed HARD drive

I have an acer aspire 8735 laptop g-6502 which has recently undergone a WD 500 GB drive HARD failure. I replaced that with a 7200 RPM Hitachi 1 TB drive and given that I don't have a Win 7 original used a disk Win 7 Pro with an extra friend.

Windows 7 Pro and HARD disk installation went smooth. But now when I plug an HDMI cable to watch through my Marantz receiver, comes from the video, but I have to do manually the Marantz the default audio device for sound. When I unplug the HDMI, I must return to the parameters of sound and unenable Marantz and re - activate the Realtek audio.

Before the drive died HARD, happen all perfectly when you plug the HDMI cable in and the fact to disconnect without any fiddling around with settings.

I also have a few other questions:
1. the touch volume control next to the numeric keypad does not control the volume more
2. the keyboard key used to have a setting to display it. You can use two fingers on a tablet to drag the image to the screen bigger and smaller.

I looked the site of Acer and also used my drive Application and drivers to reinstall everything that looked related to these issues. When first, I installed Win 7 Pro I let Windows find the appropriate drivers. It worked for some things but not others.

Any ideas? I have a few scratches on my face and my forehead in frustration pain making me beat me here. Funny, but true, so all ideas are appreciated!

Here's my screen design Mgr impression - there's an 'unknown' device IDK how to understand what it is.

Hello...

You have installed the application to launch mnager. Alternatively you can install from this link and check the function of touch volume control and display adjustment launch application manager

Torch2 9810 blackBerry Smartphones: sudden cannot hear on appeal after a call end and the ring shut! Help, please!

I bought the new torch. And now it crashes. Auto restart. And the main problem is every day, I need to restart the phone I can't hear in the call or can't hear my ringtone too. He gets completely silent. Help someone. After I rebooted phone works very well for a while and even once it starts. Please let me know a solution or if someone has a problem like me...

I have a similar problem with my 9810. Occasionally (one or two times a week maybe) my sound disappears for no apparent reason. I play a song or a video in Media Player and even if I see that the song/video is playng no sound.

I wonder if it is related to the fact that I have a custom profile all the time (except in bedside mode). I'll try to play with it and report.

The only solution I found is to perform a reboot of the device (ALT_SHFT_DLT). Putting off the unit and fix it.

It is very annoying, especially when you are about to show a video to someone who owns an iPhone :-(

Selection of group and the radio text box

I have a form with a question like: "How did you who are we?" and a radio with some choice group. One of the radio group choice is "other - please describe! When selected, a text box changes to 'read only' and the user can write something. I'm not able to update a record with the user's selection in a field in a table (I can save either text or radio group selection area). Any help? Thank you!

You should check the value of the selected option button. If it's not ' I have this answer: ", assign the value to $_POST ['Proposal_text'].

If ((isset($_POST["MM_update"])) & ($_POST ["MM_update"] == "form1")) {}

If ($_POST ['proposal']! = ' I have this answer: "") {}

$_POST ['Proposal_text'] = $_POST ['proposal'];

}

$updateSQL = sprintf ("UPDATE sarcini SET solutie_6 = %s, introd_6 = %s WHERE id_question = %s",

GetSQLValueString ($_POST ['Proposal_text'], "text").

GetSQLValueString ($_POST ["'Full_name"], "text").

GetSQLValueString ($_POST ['id_question'], "int"));

Problem area and the legend of zoom
Hello

I have a problem with the function of Adobe Captivate zoom area. I use the same slide a zoom area and some legends on the top of the zoom destination area. The problem is that the zoom destination area keeps appearing on the top of the legend, according to the configuration of the chronology, it should be behind them. Can anyone help?

Cheers, Andrei
Problem solved

I just had to change the order of the legends, and now it's ok. I basically kept order as it was when the problem occurred: slide, layer of mouse, zoom area and legends.

See you soon! Andrei

Later edit... Thanks Rick for your comments... saw your post after I posted it.

After selecting an area and the application of fill, where the "done" or "Tick" to remove the moving dotted line?

Similar Questions

Maybe you are looking for