After stop of Smartwatch2 'smart connect' paired...

Similar Questions

• Replace/upgrade my router after purchase/adding a 'Smart' to my network TV and now have a noise to connect/disconnect running in background.

  Original title: connect/disconnect sounds in the background

  I had to replace/upgrade to update my wifi router after purchase/adding a 'Smart' to my network TV and now have a noise to connect/disconnect running in the background, on something, every few minutes.  It does not affect the operation of my computer, but it is very annoying. Cut the old router market and connect and disconnect before replacement, but did not any noise so I don't think it is related to that.  I can't find any evidence of the old router on the computer anyway.  I hope you can help me!

  Hi Danielle65,

  You can try the following steps and check if it helps.

  Method 1:

  You can also perform a clean boot and check if it helps.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: Make sure that you put the computer to a Normal startup once you are finished.

  Method 2:

  You can also check in Event Viewer about what is causing the problem. Alternatively, you can publish the results, so that we can help you solve the problem.

  Open event viewer

  What are the information contained in the logs of the event (Event Viewer)

• Smart connect works only with headphones

  Smart connect app stopped working with headphones, tried to dump the data and also restored the phone to factory settings but still nothing with any pair of headphones, I installed the app soundabout and helmet all work with this, then ask yourself if it's a software issue rather that the headphone jack is the problem, any advice please?

  I read a post that is almost identical to this one, please contact your local Xperia of care that it might be a hardware problem

  http://support.sonymobile.com/global-en/contactus/

• 4540 proBook s does not start after stopping

  Brand new Probook s 4540, B7A48EA #BED, of the box. Memory 4 GB DDR3, 500 GB, processor i3, SUSE Linux disk.

  I have install the battery, connect the power supply and turn on laptop. Linux installation started, got the message 'creating recovery root tarball' and wait, wait and wait with the same message of Linux. I rebooted the laptop and after that got Linux message 'Cannot find size info part of recovery' and restarted itself, every 120 seconds.

  I turned it off, by pressing the power button / stop 5 sec.

  After that, I can't turn on laptop. When I press the power button / stop, power, drive, browser and Flash of LED wireless, you can hear disc trying to turn but fail and all the lights go out and about 2 seconds later all lights flash once again, drive tries to spin but fail again and laptop does not start.

  I have 'power reset', updated the BIOS (F.40), removed the drive and DVD drives, tried without battery but no change in behavior. I returned the drive and the original DVD. After removing the memory, portable lights, as if, and caps lock flashing of LED 3 times which means error memory. After that, I did a "reset power" once again, reinstall memory and try to start the laptop. After pressing the power button / stop at the beginning I had same symptoms I described, and after 2 portable seconds began. I installed Windows 7 Pro. Laptop computer can be restarted Windows, but after stopping, he can't press start button to start / stop.

  One way to start is to move the memory in the other slot, but it cannot start after his stop. After his return in the first memory location can be started again until the next stop. And when start, does not start from the beginning, but after 2 seconds, for his second try. The BIOS memory test, the EFI system diagnostic and memtest86 has errors. I tried with different memory module but got the same symptoms.

  Should I change a motherboard?

  After replacing the motherboard (systemboard), everything works.

• Smart connect actions on Xperia XZ misses

  I use smart connect often enough on my old Z1 Compact. On my new XZ, I also want to use the same way.

  But although the versions are the same, that I miss actions on the XZ.

  -I can't adjust the brightness of the screen when I want to enter nightmode. I don't know the feature to decline automatic intensity.

  -I can't go 4G - data, start/stop when I want to enter nightmode. I don't have an update at 03:00.

  -I can not set up a hotspot wifi on the phone automatically, when you use an NFC tag (Yes, I still use them, they are bright).

  Any help to train the guys.

  Otherwise, I rather not want to use a third party app.

  Tanx.

  Christofer,

  Thanks anyway but it's a real shame.

  I still wonder why the same version lacks some critical options.

  This leaves me no other choice then to seek a third-party application that always works instead.

  Like Tasker, or something.

  If progress isn't always a step forward.

• Smart Connect bug

  I have smart connect together to launch Spotify and Walkman a pause when the headphones are connected. It is also put on pause when the headphones are pulled out. Since the update published last week (v. 23.1.A.1.28) smart connect play Walkman when the earphones are plugged in regardless of the settings. Can he be looked into Sony?

  1 review your Smart connection settings, do not forget that the Walkman is now called music, maybe you need to re - select again.

  2 - clear cache connection Smart app:

  -Go into settings--> Apps--> Smart Connect-> Force stop, Unistall updated, clear data.
  -Go to your local game store and Smart update log in again.

• Smart Connect does not recognize bluetooth connection more

  With SmartConnect, I used to market music and mobile when data my car bluetooth pair my phone camera.

  Works well until the last of the last Android update (I think...).

  But now, Smart Connect recognizes NO bluetooth connection (recently tried with headphones or headsets).

  I have to manually switch the event myself and therefore SmartConnect see that the bluetooth device is connected and then launch everything that I want.

  What I have:

  Sony Xperia Z3 Compact (D5803)
  5.1.1 Android
  Build 23.4.A.1.232

  Already tried to uninstall SmartConnect updates, no effect.

  Thank you!

  Try to clear the SmartConnect given app.

  1. tap the icon of the Application screen.
  2 find and tap Settings > applications.
  3. slide the tab all.
  4. search and tap on the application.
  5 tap Force judgment > clear data.
  6. restart the phone

• SW2 - host App and Smart Connect different certificates. Host application cannot start.

  I had my 2 SmartWatch today and installed app Connect Smart and SmartWatch 2 since google play, got the smartwatch of pairing with my bluetooth phone manual connect.

  But in the notification bar I get "the application host and Smart Connect different certificates. Host App cannot start. "and I can't go settings on Smart Connect to the SW2.

  Please help, now I can't use the no apps smartwatch becouse...

  It's very strange, these files works fine for me in an S3.

  Would it be possible for you to make a backup of your phone then reset (or reinstall the software using Kies if possible), and then try again (before restoring the backup)?

• Windows firewall stops when a wireless connection is established.

  Windows firewall stops when a wireless connection is established during the start-up or wakup or manually connected via wireless.  The firewall can be activated manually after wireless connection is established.  Firewall survives boot and reactivation if computer connected to the router via ethernet (cable).

  OS is 32-bit Vista Home Premium, SP2.  The platform is Acer A4720Z dual-core Intel laptop.  Wireless adapter is integrated Atheros AR5007EG - Atheros 7.70.396 driver (whidh is current & compatible Microsoft version).

  Current virus/firewall is MSE and MS Firewall.  No firewall problem until the installation of Security Essentials.  Previous virus/firewall was Mcafee SecurityCenter Suite that uninstalled cleanly via the Remove Mcafee (MCPR.exe) utility.

  All the relevant ideas welcome. Thank you.

  Go to network and sharing Center and then choose manage wireless network and try to remove this Wireless if it is there and try to add it again if you want. Try to upgrade Microsoft Security Essentials and also check for update for Windows. Also, run the full system scan and remove potential threats. If the problem has not resolved then contact technical support:

  https://support.microsoftsecurityessentials.com/

• Meeting place 7130 Intel Smart Connect agent technology is not running

  I have a GT 7130 with an i-4300Y processor and a 256GB SSD LiteOn and 8 GB of RAM

  I was a symbol of exclamation flashing in notification on Smart Connect drawer. I click it and it says that intel Smart Connect technology Agent does not run

  I tried to go to Services and tried to manually sgtart the Agent technology Intel Smart Connect, and it opens a box that says The Intel Smart Connect technology Agent on the computer started and stopped Local service. Some services stop automatically if they are not in use by other services or programs.

  I tried to repair the installation of Connect Smart with Dell drivers.

  Is it OK? Tablet works great as it is but just curious to know if I need to do something to solve this problem

  Thank you!

  I just updated the BIOS to A09 (released yesterday).  Then, I went into the BIOS and enabled the SmartConnect technology (it was not checked).  When I logged into Windows, I still had the same problem.  Then I went to Services and start the service, and it worked.  I rebooted and do not get more error.

• After Update 9.3.5 connect my iPad iMessage

  After Update 9.3.5 connect my iPad iMessage. He must have signed me apply the last update, but when I registered just in it sits on this...

  

  Any suggestions please?

  Hi wolf24359,

  Looks like you have some problems to sign in your iMessage after iOS update? No worries! Try this link for some excellent to have your iMessage facing up and running without delay. If you get an error when you try to activate FaceTime or iMessage

  This is what it takes to get up and running. Please use the Apple Support communities to post your question. Good day.

• Correct settings to use Smart Connect and load balancing?

  Hi guys

  I have a question, the answer of which I was not able to find explicitly, so I hope a quick fix OK / not OK for you:

  I would use tri-band technology provides the R8000, i.e. to activate Smart Connect / load balancing. Is - it only works Ghzs 5 band, or the router can also connect clients on the 2 Ghz bands?

  If this is true, then I need to give the strip of 2, 4 GHz the SSID the same 5 Ghz band, correct?

  Otherwise, if it only works in the 5 Ghz bands, I could keep the SSID distinguishes?

  Thank you

  Balancing of resources between the two radios. 2, 4 GHz band vs a single radio, the two radio channels in the 5 GHz band.

• Intel smart connect

  Hello world

  Does anyone know what Intel Smart Connect do? When I go into the Device Manager on a couple of our devices have a yellow bang labeled as peripheral unknown! When you install Intel Smart Connect is disappears?

  Here you go:

  http://www.Intel.com/support/services/SmartConnect/sb/CS-033108.htm

• LAPTOP HP 15: BUTTON (F12) WIRELESS LED LIGHTS AMBER COLOR AFTER STOP OF THE LAPTOP

  THE BUTTON (F12) WIRELESS LIGHT AMBER COLOR AFTER STOP OF THE LAPTOP. THE AMBER LIGHT LIKE THAT AFTER PRESSING THE POWER BUTTON ON THE LAPTOP. MEWANS TI LAPTOP DON'T SE NOT GOOD SHUT DOWN ON GIVING THE STOP COMMAND. ASK FOR HELP ON THIS ISSUE TO YOU.

  Hello

  Try disabling the startup of Windows 10 hybrid - you can do the following.

  Open settings and select System.  Select food and sleep, and then click additional power settings - in the next window, click on "Choose what the power button" in the left pane.

  In the next window, click on "Change settings that are currently unavailable" (close), then Remove the check mark from the box against 'Turn on a quick start (recommended) '.  Click on the button Save the settings, and then close windows open and stop the laptop by right clicking on the icon in Start Menu, select (Admin) command prompt and click 'Yes' to the uac prompt.

  Type (or copy and paste) the following command (including spaces) and click Enter.

  Shutdown /s /t 0

  Start the laptop and let Windows take over completely for a few minutes before checking if it is now shut down properly in the Start Menu.

  If this has fixed the problem, it may be useful by turning the quick start back on - sometimes simply remove and re-create the file will solve the problem.

  Kind regards

  DP - K

• Outlook express has just stopped working error: the connection to the server has failed. Error number: 0x800CCC0E

  Original title: outlook express just stopped working

  The connection to the server has failed. Account: 'sale', server: 'mail.thornroofing.com.au', Protocol: POP3, Port: 110, secure (SSL): no, Socket error: 10013, error number: 0x800CCC0E

  the message it gives, have disabled norton e-mail analysis?

  the message it gives, have disabled norton e-mail analysis?

  
   
  Try a test message with Norton shuts down completely. If it works, remove Norton and do a custom Setup, opting out e-mail Scanner when it is offered. Sometimes just turn off is not enough.