After that I did a lot of renaming all my pictures are a white block! Help, please

I made a batch in bridge renaming and all my photos jpeg, transformed into a white block, pictures are gone, PS, or bridge to recognize the file. That's happened?

I also had a file PSD of each photo that still shows the photo in the bridge, but not open, it says that it does not recognize the file.

I choose the option to keep the original name and the extension.

I tried to rename and change the file. ext, but it does not help.

Any thoughts?

It seems that you have more then one point or several extensions in the name of the file.

But perhaps a screenshot of your content with names window would clarify a bit more.

In general, you should use only a point in a file name and it's the one at the end of the file name (for a jpeg file that would mean ".jpg").

Just select a file in the window content and with right click of the mouse, choose duplicate. This provides a double with the addition of copy file after the name of the file and before the extension. Just select the full domain and type: test.jpg and then try again.

Tags: Bridge

Similar Questions

  • Hello. I buy the Macbook Air Mid 2015... After the upgrade to El Cap internet speed slowed painfully. What should do? Help, please

    Hello. I buy the Macbook Air Mid 2015... After the upgrade to El Cap internet speed slowed painfully. What should do? Help, please

    When you see a beachball cursor or the slowness is particularly bad, note the exact time: hour, minute, second.

    These must be run as administrator. If you have only one user account, you are the administrator.

    Run the Console application in one of the following ways:

    ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

    ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

    ☞ Open LaunchPad and start typing the name.

    The title of the Console window should be all Messages. If it isn't, select

    SYSTEM LOG QUERIES ▹ all Messages

    in the list of logs on the left. If you don't see this list, select

    List of newspapers seen ▹ display

    in the menu at the top of the screen bar.

    Each message in the journal begins with the date and time when it was entered. Highlight date back to the time you noted above.

    Select the messages entered since then until the end of the episode, or until they begin to repeat, whichever comes first.

    Copy messages to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

    The journal contains a large amount of information, almost all this is useless to solve any particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

    Please don't dump blindly thousands of lines in the journal in this discussion.

    Please do not post screenshots of log messages - text poster.

    Some private information, such as your name, may appear in the log. Anonymize before posting.

    When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

    If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

  • I just did an itunes update, now I can't find my music. Help please.

    I just did an itunes update, now I can't find my music. Help please.

    You will need to provide more details, but here is a screenshot of my iTunes (top-left) window

    The row of small buttons 'Library' has been replaced by a drop-down box, when you select the library view.  Music is selected in the screenshot.  In the sidebar, under the library, you can select the view to use for the library.  In the screenshot, songs is selected, which presents a library as a list of simple songs with columns.

  • After the upgrade to Windows 10 ALL my pictures are GONE! Lightroom started upward as if it were a completely new program. Tried the Adobe difficulty (all 3 steps) nothing.

    After the upgrade to Windows 10 ALL my pictures are GONE! Lightroom started upward as if it were a completely new program. Tried the Adobe difficulty (all 3 steps) nothing. What now?

    Hi lisah64134956

    Greetings.

    • Please specify what adobe patch are you talking about?
    • A you kept a backup pf your LR catalog and images somewhere before moving on to Windows 10.
    • You have access to your original images, or they went too?
    • Try to search the catalog using windows search, .lrcat is the extension of the catalogue, see if you find something.

    Concerning

    Rohit

  • I'm trying to download the free track of After effects.  Keep the error message and get the ' we are currently experiencing some issues, please try again later. " If the problem persists, contact customer service. »

    I'm trying to download the free track of After effects.  Keep the error message and get the ' we are currently experiencing some issues, please try again later. " If the problem persists, contact customer support. "what I'm doing. I have tried for 2 hours and need to complete course work.

    you use the cc desktop app to download?

    If not, https://creative.adobe.com/products/creative-cloud

  • Firfox is always loaded on my computer, but does not open. Would not open after that I did a restore (have XP).

    I did a restore (Windows XP). After that Firefox would not start. You can see the "Hourglass" for a second, but nothing happens. I tried the Mode SAFE Start and it wouldn't work. I went into the program file and tried to open with the .exe of the fie. Nothing, I don't don't want to lose my favorites by installing a new version. I have tried creating a new profile becauae I don't know if I can do it right or even if it would work.

    Would appreciate any help. Thank you. Bearcat78

    Hello Bearcat78.

    I advise that you think... a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. But it's not too difficult.

    Note: You can print these steps or consult them in another browser.

    First, save your profile by saving a copy of the profile file... See: profiles of boards - where Firefox stores your bookmarks, passwords and other user data.

    1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
    2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
    3. Remove the Firefox installation folder, which is located in one of these locations, by default:
      • Windows:

        • C:\Program Files\Mozilla Firefox
        • C:\Program Files (x 86) \Mozilla Firefox
      • Mac: Delete Firefox in the Applications folder.
      • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
    4. Now, go ahead and reinstall Firefox:
      1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
      2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

    Please report back to see if this helped you!

  • My customization option went after that I did a few customization that I don't like. Help please

    I tried to do some customization of my toolbar and what it looks like. I don't like what he did then I wanted to change it back but the icon customize is no longer visible nor y at - it of my toolbar icons. All I have is the Star bookmark, download box, reception, and magnifying glass. All my bookmarks are invisible.

    How can I get this reset back to where it was? I can't do anything if I don't see my toolbar.

    Where the icon customize?

    Ok. I could get my toolbar to return but I don't always have the icon customize.

    I did the window when the URL is greater. Next to which is Google Search, then the Star, bookmarks, download, home and search.

    With regard to the right click. I don't know how to do it. There is a way to hit or option or command control. I got Google whenever I have to do.

    I tried to attach a screenshot, but it tells me its too big.

    I found it! I used the help!

  • What is the best way to properly activate the Lightroom Student Edition? Is the edition of students a permanent program, or it disables it after that student 2-4 years, as some other programs which are the versions?

    I just bought the student Lightroom edition! I am very happy to use it and start creating beautifully modified pictures, but I'm a little unsure on a few things. He says that I have to prove my eligibility to use student edition which won't be a problem, but what is the way the faster and easier to present this evidence? I also fear that the student edition will be temporary and I have purchased this program only to have it end after 4 years as some other programs that are student versions. Is the student a permanent program of Lightroom edition that I will have for life or it will turn off after I graduate?

    When I bought my academic version of Lightroom, it's a whole package. Inside was a yellow card with instructions on how to check that I qualified for the academic discount. I presented my academic e-mail address and other info, as requested on this yellow card. Less than 5 min. I received my serial number. Very simple. I had no problem whatsoever.

    There is only one version of the program Lightroom itself. The only difference lies in granting licenses and pricing. If you are eligible for the academic discount, by all means use it. You buy the same Lightroom program that someone else does. It does not expire, there are no missing features, and it can be upgraded when new major versions are available. These updates will cost the same as they cost to anyone else, regardless of how they bought Lightroom.

    You can move confidently until you have received your serial number. The only thing you do differently pays an initial purchase price lower because of your academic status.

  • My facebvook page that I opened was a language different yet AVG is picking up threats! Help please?

    I just went on Mozilla since I use it all the time after that computer has been restored. I'm afraid to use Mozilla now given that the page has a different language on this subject and I have not the Google translator is turned on. Please my AVG antivirus is not picking up the deliberations and I am about to light my Malwarebytes, just in case there is a threat there. HELP help I love the browser and like it better than IE or Chrome. Plese help me

    Sometimes a problem with Firefox can be a result of malware installed on your computer, you may not be aware of.

    You can try these free programs to search for malicious software that work with your existing anti-virus software:

    Microsoft Security Essentials is a good permanent antivirus for Windows 7/Vista/XP, if you do not already have one.

    More information can be found in the article troubleshooting Firefox problems caused by malware .

    This solve your problems? Please report to us!

  • After Update 9.3 all my images are in white

    After Update 9.3 all my pictures and videos are white, roll in camera it's normal as when I was at 9.2. but in "Kik" it is just white with cloud over all the photos and videos in Instagram it's blurry. I checked my "Icloud"photo sharing"and it is turned on, but I think that I don't turn it on when I was in 9.2 and it saids"Update 2 minutes ago... I don't want to use iCloud photo sahring I don't need. How to solve this problem!

    Maybe the problem is with the 'Kik' app you mention (if that's what it is). I could go to the iTunes Store and see if others see the same thing with this "Kik" (app)... If they are, then that's a problem with this app (if in fact it is what is "Kik") and iOS 9.3.

  • BlackBerry Smartphones that I have new email notification but not new emails in my Inbox? Help, please...

    I got 1 new email notification, which is now 2 new emails, but when I look in my e-mail inbox I have not any new emails.

    I also checked my e-mail options to make sure that I have no filter or hide everything and I did not.  Someone how to find these new emails or how can I solve the problem?

    Help, please...

    Thank you

    VT

    When you go into Messages and press the U key, it selects all unread messages?

    If this isn't the case, have you tried a battery pull?

  • After you disable the new interface to tabs, all new documents are not open in a larger window

    Hello

    Yesterday I upgrade my Adobe 11.0.10 Adobe Acrobat Reader DC 15.010.20056 player. The tabs interface was pleasant enough, but there are still some limitations with this features, such as,.

    1 > no option to set no maximum. tabs in a single window,

    2 > tabs cannot organize, to be moved to a new window and several selected

    I want to disable the new interface to tabs via Preferences > General > open documents in the new tab in the same window (not checked), but after you turn off the new tabbed interface, all new documents open after the first document are not open in a maximized window, they always opened in a restored window.

    No matter what I do, it keeps - on the opening of the second new pdf in this one, restored windows are the things that I tried to overcome this.

    1 > right of the DC open Adobe Acrobat click in the task bar > Adobe Reader DC > right click > properties > run: enlarged - only the first document opened in maximized windows, documents later opened in the restored only, window that too seem to not work when I closed the last document in a restored window. Opening in the same window type is part of the windows operating system, it does all the time, "opens the entire application in the same way that they have been closed, either maximized/restored and the size of Windows too". Only the first one application window is open in this way, rest of the windows open is seems to be not supported by the operating system.

    2 > of this forum discussion https://forums.adobe.com/thread/435552?start=0 & tstart = 0 , I checked for the mentioned, registry keys

    HKEY_CURRENT_USER\SOFTWARE\Adobe\Acrobat Reader\DC\SDI

    the default value is - "bNullDocMaximized" = DWORD: 00000001 , "bMaximizeNextDocument" = DWORD: 00000001 and "bResizeOnOpen" = DWORD: 00000000

    Exchange only tried on the third button (the rest has been preset to required values) - "bResizeOnOpen" = dword: 00000001 - restart > no change > reset to its default value

    What to do now...?

    Thanks in advance

    Hi Gangatharran,

    Thank you for bringing this to our notice.

    We have recorded a bug for this and will share an update on the progress made in this thread.

    Kind regards
    Rave

  • I just deleted all of my pictures from summer holidays due to the Elimination of a shared album (thinking that the originals would be safe). How to restore pictures? I can? Help please!

    Recover a deleted shared album

    More details-, I got a shared album with photos of the summer in it.  I tried to stop the shared album so I removed it to see - to my horror - that he deleted all copies of the pictures in my photo stream and I have too many clouds! Disaster!  How can I recover photos? I can? Help please!

  • After the installation of the new black ink cartridge, my pictures are distorted

    After installing a new black ink cartridge, my pictures are distorted

    Hello

    I suggest you to contact HP for further assistance regarding this issue.
    http://WWW8.HP.com/us/en/support-drivers.html

  • After that I did the timeline - I get a black border on one side of all my photos

    Hello world. I'm doing a simple simple slideshow (no effect or alterations of any type) of pictures taken with my camera canon 6 d. They have been taken with the best resolution of 5184 x 3456. The ratio is 3:2. When I let fall one of the photos in the new point bin and I let first choose the sequence for me, first do not find one of its presets, but creates instead a sequence custom with dimensions that correspond to my photos of 5184 x 3456. It also corresponds to the normal of 1.0 square pixels. The dimensions of the video previews it creates are 1620 x 1080. Just after the sequence is created I get a solid red line in the timeline and at that time my photos fill the program monitor completely even during playback, but as soon as I made the timeline, then I get a solid black border to the East (from my point of view in looking at computer) all my photos, I spent a lot of time on it to try to find me a solution. I couldn't do it. So I did an experiment and I resized images in 16:9, and as soon as I did that the first matches a sequence of his presets and the problem disappeared. I think that the first sequence that is format of 5184 X 3456 with my native is not quite correct. But my question is how to find the right order? Ultimately I have trying to find a way to make a slideshow on the front using the images to their original dimensions mentioned above without the black border. the photos cannot be affected by any means, because they must be used in a demonstration of the Court of justice. Could someone please help me with this? Thank you very much. Umberto.

    Umberto, sorry for the long time between responses. Finally, I got the chance to test with your images and was able to reproduce it on my system. While I can't tell you why this is happening, I have a work around you.

    The problem is in the render files. When you return your files PP done new video files and play those back instead of the original and support for some reason to MPEG I-Frame rendering only (default) creates this black bar.

    I imported two photos into a new project in Premiere Pro v2015.1 and drag them to the new sequence button. They played back normally. Then, I made the timeline and saw your black bar on the right side.

    I open the sequence settings and changed the File Format of video preview GoPro CineForm (YUV 10 bit) and then made it and it worked fine! Personally, I normally use QuickTime ProRes codec, but I see on your screenshots that you run Windows, so the GoPro CineForm codec is probably your best option. Which should contribute, and during this time you should present this as a bug to Adobe since it is so easily reproducible.

    See you soon,.

    Matt

Maybe you are looking for