My customization option went after that I did a few customization that I don't like. Help please

Similar Questions

• I installed VMware ESXi on my Cisco's UCS server but after that I don't get from CIMC.

  I installed VMware ESXi on my Cisco's UCS server but after that I don't get from CIMC. also, I am unable to ping the address IP of CIMC. Any help?

  I think that MMIC does nothing with your ESXi installation... it is OoB management for servers of the UCS.

  Check your config MMIC inside the BIOS again.

  BR,

  Dragan

• Can I return to windows 8 given that I don't like windows 10?

  Can I return to windows 8 given that I don't like windows 10

  NOTE: When you migrate to Windows 10, previous Windows files and folders are automatically stored in the folder C:\Windows.old . This record must be kept by Windows only for a month. After a month 10 Windows automatically deletes the folder. Yes, you can restore the previous version of Windows in a month after upgrading Windows 10. Also, if you run Disk Cleanup in Windows 10, be sure to uncheck the option "Previous Windows installations". If you clear the checkbox, Windows will delete all of the files and folders in the folder C:\Windows.old and you will be unable to return to an earlier version of Windows.

  1. the app to display the parameters of the Start Menu and click the Update & security.

  2 now click on the recovery section and from there you will see "back to Windows 7 or 8.1" option.

  

  3 click the option and it will ask you for the reason for restore the previous Windows version such as the previous version of Windows was easier to use, was faster, etc. Simply select a given option you want and click the next button.

  4 it will ask a few more things and you just need to click on the next button.

  That's all. Your computer will reboot and appears "torestore your previous version of Windows...". After a few minutes, your previous version of Windows is restored successfully.

  NOTE: If you are unable to access Windows Desktop 10, you can use the alternative method:

  1. click the button power on the login screen, hold down the SHIFT key and then click the restartoption. It will open "Advanced Startup Screen" as mentioned here.

  2 now go to "solve problems-> Advanced Options" and click the option "back to the previous version.

  It will restore a previous version of Windows in a few minutes.

  http://www.askvg.com/how-to-restore-previous-Windows-version-after-upgrading-to-Windows-10/

• I have a 7 GB of HDD in XP, there very few applications and no photo or music, but after cleaning everything I could think of, still 10% free space. Help, please.

  I have a 7 GB of HDD in XP, there very few applications and no photo or music, but after cleaning everything I could think of, still 10% free space. Help, please. I deleted all the old temporary files, all the old restore points, all files update of Windows that have been applied, but still can't below 10% free space. The unusual thing only I see, the defragmentation runs (when I force him) but still shows 62% of file Fragmentation?    Any help would be appreciated... Thank you.

  These can be useful:

  How to recover disk space on Windows Server 2008 and Windows XP computers

  http://www.Piriform.com/CCleaner

  John

• Hi there - already I bought a month of adobe stock (10 pictures per month) and cancelled it after a month. The system is not offered this choice. Help, please. It meets my needs, I won't be frozen for more than a month. Thank you

  Hi there - already I bought a month of adobe stock (10 pictures per month) and cancelled it after a month. The system is not offered this choice. Help, please. It meets my needs, I won't be frozen for more than a month. Thanks Jo

  Hi Joanne,

  Do you mean that you're not seen the monthly plan? Can please sign in the stock site, go you to: plan pricing and membership Adobe Stock | Adobe Stock and send me a screenshot of what you see? This will help me to solve your problem.

  Thank you.

  EBQ

• Re: Keep having to reinstall CC whenever I restart my CPU. Said that CC is missing! Help, please!

  I have this same problem as well, and I don't have the trial version.

  Branched to a new discussion and moving to form Creative cloud download & install .

  Hi Veronicarusnak,

  Please share the following information so that we can try to help you appropriately.

  • Version of the creative application of cloud.
  • Version of the OS.
  • You use the admin user account?
  • What other Adobe CC applications are installed on your computer?

  During this time, please make sure you download Creative Cloud desktop application from: https://creative.adobe.com/products/creative-cloud and install it.

• I just bought a Kumix FZ300. IAM taking pictures in RAW. When I went to import photos into Lightroom 5.7 photos were not recognized. Help, please. Mark

  IAM trying to post photos of process taken in RAW of my Lumix FZ 300. Lightroom 5.7 ca't recognize the photos. Help, please

  If you are targeting on the Panasonic Lumix FZ300, the camera was first supported by Lightroom CC 2015.1 or Lightroom 6.1. It will not be supported in the version you have. You can upgrade or use the free DNG 9.1 Converter to create DNG copies that you can use with what you have now.

• Roxio went after that I wiped computer but was here?

  • OK so I had to Roxie when I came to my computer, but since I whipped it has not come back even if I have not installed it was already here what can I do to get it back?
    
    
  Hello
   
  Did you receive any disk manufacturer, when you purchased the computer?
  
  It may have been preinstalled on your computer when you bought it. You may need to reinstall now. Please contact the manufacturer of the computer.

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• My optical drive will see a game/music if I insert it as soon as I turn on the laptop. After that nothing. Can anyone help.

  I'm playing a game on my laptop Toshiba Satellite L350-121, but the optical drive will see the disc if I incert as soon as the computer is started, if I do that the game will work, but if I stop the game or music and you try to incert the disk again the reader does not see it, my OS is Windows Vista serves pack 2 im on a 32 bit OS, my processor is an Intel Celeron T1600 @ 1.66 Ghz, I have 2 GB of RAM, and my optical drive is a DVD/CD-R Matshita RAM UJ880AS.
  I tried the troubleshooting Microsoft's automated with no joy. Can anyone help.

  Hello

  Here are a few articles that will probably solve your problem.
  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista

  http://support.Microsoft.com/kb/929461

  Your CD or DVD drive cannot read or write media - A Mr Fixit

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  When you insert a CD or a DVD, Windows Vista may not recognize the disc

  http://support.Microsoft.com/kb/939052

  Mark <> Microsoft Partner

• R12.2.4 data lost after using the dialog Page and return to the calling page. (Help please!)

  Hi team,

  I'm new to OAF and works on a requirement to add some custom validation when the user clicks a button in a seeded standard page.

  The approach I took was to extend the seeded controller object managed this press event button and put my custom logic in the extended controller and substitute the standard controller through customization.

  The standard rate which was pressing the Complete button A Page, the user was taken to the next and epepinee page (Page B) some operations based on records that have been chosen Page A.

  Part of the custom validation requirement that was if some postings were not met, the user must be a pop-up asking if they really wanted to move forward and if they have selected Yes then continue with the seeded standard flow (transition to page B) and if they have NOT selected then just remain on the current page.

  I have used OADialogPage and to do this, in part, the question , I am running into is that when the user selects one or more records using a check box in a region of several record (table) and click the full page and if the validation fails then a modal page and the user made a selection i.e.either Yes or no modal page and when they return to the calling page (ex. Page A), all data (records) they chose previously is lost (the Page is refreshed). Based on what I see on this forum, I suspect it's because after having click Yes on the modal page and then return to the original page the processRequest fires again and the VO data is queried again and has all the parts on the page are lost. Since I am changing the flow in seedlings pages based on the intervention of the user I'm confused as to how this problem can be solved. that is, prevent the page refreshes or preserve the selections that were made before you navigate to modal page. Any help is really appreciated!

  My Code:

  ' Public Sub processFormRequest (OAPageContext oapagecontext, OAWebBean oawebbean)

  ...

  ...

  If (oapagecontext.getParameter ("completeOps")! = null) {}

  ...

  ...

  If (warnCount > 0) {}

  OAException message = new OAException ("not in order...", OAException.WARNING);

  oapagecontext.putDialogMessage (message);

  OAException message = new OAException ("XYZ Violated rule. Do you want to continue? ", OAException.WARNING);

  DialogPage OADialogPage = new OADialogPage (OAException.WARNING, message, null, "","");

  String Yes = oapagecontext.getMessage ("AK", "FWK_TBX_T_YES", null);

  String number = oapagecontext.getMessage ("AK", "FWK_TBX_T_NO", null);

  dialogPage.setOkButtonItemName ("ConYesButton");

  dialogPage.setNoButtonItemName ("ConNoButton");

  dialogPage.setOkButtonToPost (true);

  dialogPage.setNoButtonToPost (true);

  dialogPage.setPostToCallingPage (true);

  dialogPage.setOkButtonLabel (yes);

  dialogPage.setNoButtonLabel (no);

  oapagecontext.redirectToDialogPage (dialogPage);

  }

  If (oapagecontext.getParameter ("ConYesButton")! = null) {}

  Write Yes button Action code

  oapagecontext.putParameter ("completeOps", "Continue");

  }

  If (oapagecontext.getParameter ("ConNoButton")! = null) {}

  Write the code of the Action for the No button

  Dim errormsg = ' rule Violations have occurred. "

  throw new OAException (errormsg);

  }

  super.processFormRequest (oapagecontext, oawebbean);

  }

  I managed to work around this problem by adding a simple control in my controller processRequest method extended to avoid the call to super.processRequest incase lhen control returns to the page once the user has made a selection on the Page of the dialog box

  If ((oapagecontext. (GetParameter ("ConYesButton") == null) & (oapagecontext.getParameter ("ConNoButton") == null)) {}

  super.processRequest (oapagecontext, oawebbean);

  
  

  }

  
  

  Thank you!
  

• After you delete the contents of my temporary files, firefox is more meets a few buttons and twitter is text-only, help please.

  I used a utility to dump the contents of my temporary folders, since then firefox does not display correctly some pages. In google mail that I have to select "use basic html" to make it work, twitter just displays the text and the buttons do not work in other applications. question 1, how to fix it and question 2, why firefox puts essential info in temporary folders

  Hello

  Please also try a new profile. If it's good, you can later copy the necessary personal data of the old profile. Firefox stores your personal data and settings to another separate location of the files/folder. A new profile would default Firefox settings (Tools (Alt + T) > Options, and topic: config ) and usually also would be vacuum of Extensions and themes (appearance) in tools > Add-ons) and their parameters. In addition, a new profile would have no previous website stored data/settings etc, (Tools > clear recent history).

  Profiles Howto

  Files & profile folder

  Subject: config entries

  You can try to prevent the temporary storage by setting override automatic cache management to 0 (zero) in Tools ("Alt + T") > Options > Advanced > network. Please note that certain data such as streaming video... always can be stored in the temporary folder of Windows.

• After the analysis of my PC - WARNING vulnerability ID: NON-2015-0211, help please

  The report says that my firmware is out of date and that it upgraded. So, as any reasonable computer geek I checked out your site and found the upgrade you suggested to other people with the same problem... download to v1.1.2.12. I downloaded and followed the instructions, there is no download, several times. I watched my router on your site and went to his specific download page and there the last update was the he version to what I have installed on it (v1.0.0.48), so I don't know if there is an update, you can direct me. Any help greatly appreciated ywould.

  Sincerely,

  Sethos099

  Unfortunately, there will be no update future firmware for the router.

  This is because the router is already EOL.

  Consider getting a newer model.

• After a 'crash' and reinstall sp3, my computer turns in "safe" mode Help, please!

  After a reinstall full of Windows and reinstall sp3, I can only raise the computer in "safe" mode  I had sp3 before and was ok? Installation online would not then end I used my original sp3 disc.

  Backup of personal data (which none should be considered 100% reliable at this point) then do a format and clean install of Windows.  Please note that another repair facility (upgrade AKA on-site) will NOT fix it!

  CF. http://michaelstevenstech.com/cleanxpinstall.html#steps

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or a network otherwise and before using a USB key that is not brand new, or has not been freshly formatted:

  5 steps to help protect your new computer before going online
       http://www.Microsoft.com/protect/computer/advanced/XPPC.mspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  See also:

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• my computer went for repair and I'm not sure how to reinstall lightroom 6. help please

  How can I reinstall lightroom? I have a redemption code that I used when first buying lightroom. I'm pretty bad with computers too.

  This redemption code that you had should have served to purchase a serial number.  The serial number is what you will need in order to get a new facility enabled.    If you do not turn off before you uninstalled then you contact Adobe technical support and ask them to reset your activations.

  http://helpx.Adobe.com/x-productkb/global/find-serial-number.html

  To the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Serial number and activation support (non - CC) chat

  https://helpx.Adobe.com/contact.html?step=PHSP-PHXS_downloading-installing-setting-up_lice nsing-activation_stillNeedHelp

  Download Lightroom 6

  https://helpx.Adobe.com/Lightroom/KB/Lightroom-downloads.html

  https://helpx.Adobe.com/creative-cloud/help/download-install-single-app-Lightroom-6.html

• The error that prevents me from work :(  Help, please...

  Maybe this isn't the right place to post this and I appologise if this is the case, but I have a problem with Dreamweaver that makes me crazy! Since yesterday, I get errors, the same mistake twice shows when I try to record anything.

  I get a different error every time I click on the file or try refreshing after changing the code.

  

  I've restored the preferences they had before this problem (although I had not changed anything).

  It becomes a problem really because everything I do doesn't take three times longer, I tried to turn off evry extension in the extension manager, but that made no difference. I also checked and repaired all of the permissions on the computer, but once again, no difference.

  If it helps I use Dreamweaver 8 on a Mac OSX 10.5.8 with 2 GB of memory and an Intel Core 2 Duo 2.33 GHz processor.

  Thanks for any help.

  Try these steps and see if everything works for you

  Troubleshooting errors in Dreamweaver JavaScript

  http://kb2.Adobe.com/CPS/191/tn_19105.html