After that I updated Firefox to 33.1, I was not able to use it. I open it and try to open a page and immediately blocked. I already tried to reinstall

Similar Questions

• After that I updated firefox to 23.0 lastnight that he put a folder called Mozilla Firefox.bak in my program (x 86) files, why is this?

  delete

  Hello

  Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  Please report back to see if this helped you!

  Thank you.

• I was not able to use my PC as he said that he might be corrupt files from a microsoft download

  When I had this problem was when I acted on a promt for download microsoft a few days earlier, after which I thought would date time default in January 2007, then he would recognize not the port for my keyboard, I changed the usb port and it worked. Later, he took a long time for my pc put on for normal use. Now, he's going to the black and white message that microsoft could not turn on and there might be a downloaded file that has been tampered with and just my computer password is now in recovery to search the files for the repair (something like that) I have no keyboard function I could not overide, now on the screen is a small bar scroll to It looks like all the files to a second 5 pace, this happened for 24 hours non-stop is this normal?

  Hello

  1. What is the exact error message that you receive?

  2. who was the Microsoft command prompt that you downloaded?

  After starting the computer, leave the computer idle for awhile and check what is happening.  Look for error messages.

  This problem may occur in many scenarios. These scenarios are:

  one.	The registry is damaged due to infection by the virus.
  b.	A system file is missing or damaged.
  c.	A device driver file is missing or damaged.

  You need to do a Startup Repair or System Restore DVD to fix this

  Startup Repair: You can run the Startup repair tool by using the Windows Vista installation disc or by using the preinstalled computer recovery options.

  Please refer to this article to perform a Startup Repair

  http://support.Microsoft.com/kb/925810

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  System Restore: You can also try to restore the computer to a point in time before the problem started.  Follow the article below to perform a system restore.

  http://support.Microsoft.com/kb/940765

  See: How to solve problems of performance during startup in Windows Vista
  http://support.Microsoft.com/kb/950684

  Thank you

• I got lightroom for about a month and are difficult to import. I was not able to use it at all. I updated today to 5.5 and I can not always import the Raw or Jpeg photos. Why?

  Why can't I import photos? RAW or Jpeg? I know that I have a learning curve steep in front of me since I'm used to Photoshop, but seriously, the first step of the import does not work and I get an error message every time. I've had about. And why can I not find a few stinky to communicate directly with adobe?

  I had the same problem. And everything that I needed to change the file to import. Follow the instructions here by b_gossweiler third comment to last. Try and see if it works.

  http://www.lightroomforums.NET/showthread.php?15440-won-t-import-any-photos

• Not able to use iTunes after that put 12.3.3 updated

  Not able to iTunes after put 12.3.3 updated

  After installing update iTunes to 12.3.3 (after the prompt), I'm not able to use Itunes. When ever open in 10 seconds a pop-up message is displayed which says that itunes has stopped working. a problem caused the blocking of the program works correctly. Please close the program. two close options to obtain the program and the program to debug.

  Please help solve this problem

  Hello! Try the steps suggested here:

  Fix unexpectedly closes or problems of launch in iTunes for Windows - Apple Support

  If you can't install or update iTunes for Windows - Apple supports

  I hope this helps!

• My HP Photosmart C309g-m printer will not print after that automatic updates have been made last night.

  My HP Photosmart C309g-m printer will not print after that automatic updates have been made last night.

  What can I do?

  Printer in Windows problems: http://windows.microsoft.com/en-us/windows/help/printer-problems-in-windows

• Windows 7 Edition Home Premium. After that windows update will in a reboot loop

  Windows 7 Edition Home Premium. After that windows update KB982926 & KB982670, will in a reboot loop, 64 bit, Dell Studio XPS. I used F8 & restore to burst. Tried the update again with the same results. Silverlight & Net Framework updates

  Hi pbmass,

  I want to clarify if you are able to start the computer on the desktop after the system restore.

  Follow the steps mentioned below and then try to install the updates manually

  Step 1: Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Step 2: Run the fixit available in the link below to reset windows update components.

   

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

   

  Step 3: Disable the security software; Follow the steps mentioned in the link below

  Disable antivirus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Important: Activate security software once everything is done.

  Step 4: Download the update manually and then install them

  The .NET Framework 4 Client Profile is available on Windows Update

  http://support.Microsoft.com/kb/982670

  Description of the update for Silverlight:

  http://support.Microsoft.com/kb/982926

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• After that Windows update restarted as requested, by getting only now white screen

  After that Windows update restarted as requested, by getting only now white screen.

  Unable to set up windows

  I was able to boot in safe mode and restore that updated windows.  Then found that the monitor is released.  Again, everything is good

• Not able to boot after that windows update, just trying to install the number 3 setting 3, and then restart the computer. With the help of Windows Vista SP2

  Friday morning I wasn't able to boot my computer more. When I start my computer it won't seek to set a parameter nr 3 of 3. And then it restarts again. My computer tried to install some windows update settings the day before with no success. I Don t remember what it was. I got Vista SP2

  The same problem happends to my computer from friends four days, after she start a windows update installation. But it has solved its problem by using the Windows installation CD and use the repair tool.

  For me, my Windows installation CD I got from Dell does not work. Not the tool repair or startreparation. And I have no reference system to return.

  What should I do? I don't want to reinstall windows again, I have a lot of information on the computer I need to.

  All the world has noticed this problem?

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  See you soon.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work, try to make a Bootable ERD to do a Startup Repair:

  As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

  As your grave in the category above, download the ISO on the link provided and make a bootdisk of it.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.

  You can do a system restart tool, system, etc it restore.

  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the ISP above Mathods to solve your problems, save your data using one of the methods below, and then reinstall Windows:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1 in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• CPU ankles 95-99% stuck on svchost.exe after that Windows update Nov 12 patches to not install

  Automatic update of Windows was put on 'On' on the morning of November 13, 2013, when I received the notice of Microsoft system tray that updates of Windows patches were ready to be installed on my computer (XP sp3, IE8, MSE).

  Updates proceeds to installation with the updated bars before the normal close.

  Updates is apparently blocked at the first update. I let it run for about 15 minutes before I made a hard stop. I thought that maybe I had lost to the Internet because the update seemed stuck on the first and took too much time, it seemed.

  Next start, computer slows almost stopped after a few minutes.

  Guilty is svchost.exe SYSTEM alternating between 95 and 99% of my system resources. I turn it off and computer returned to normal.

  Has done research on the web, stop automatic updates and processor svchost problem disappeared, unless I went to Microsoft updates and svchost.exe Web page re - would seem to consume almost all of the CPU resources while bars update Microsoft constantly scanned my system for the latest upgrades necessary.

  Spending a day to try various fixes posted on the internet. A Microsoft Fixit said that he there had errors in the update and fixed all but one saying registration number was bad (said he couldn't fix that). Despite everything, still the same problem.

  On the same day, an error was unable to update the definitions of virus on MSE, but for some reason, the next day (14) updated crossed.

  Update: some progress: I leave svchost cogitate on the webpage update from Ms. After about 1/2 hour, the updated hotfix list showed. I tried to install it, but not updates managed to install. I am currently re - try, as suggested on the Web page.

  Also tried the command "net stop" method mentioned in several places, as a tool of Malewarebytes Anti-Root running. Nothing.

  Tried the fix for IE8 security as suggested, nothing.

  Tried system restore, but I must have something wrongly configured with it because it was not able to restore any earlier date, I took. Bad luck.

  Never had a big problem with my set-up in all the years I've been running XP sp3, until now.

  Next thing I'll try is Park on the side of Windows Update for an hour or two, with the idea that maybe my processor is in need of more time to digest something.

  I see that others have had this problem, but not necessarily with patch release on November 12.

  UPDATE: some progress, perhaps. 1/2 hour parked page update of Windows, with SVChost churning away, and I got a list of patches. I tried to install, but all of them failed to install. I try a re - install, as suggested.

  Let me propose a summary of how to fix the MSE / Windows Update problem and the svchost problem:

  1st thing to do is to disable the automatic updates window. This will keep your computer against svchost.exe freeze for now.

  2nd, follow the instructions in Xircal to check that you have "BITS" listed in your list of "services". Correct it if not.

  3rd, IE remove it from your list of programs, and then reinstall it, making your first update of the IE rollup, as suggested previously.

  That he "should" do and you can activate the automatic updates on svchost.exe should return to normal. Proceed with the update of Windows and MSE as usual.

• Cannot connect LiveView after that I updated. :(

  I just installed SUS for reasons other than the update of LiveView. I saw that they had an update for the LiveView, so I tried the update. The update process went smooth and well. However, after that the update and I lit my LiveView, it can no longer connect on my Xperia Active. I've never updated the LiveView since it came with my belt and no I'm regretting that I did.

  Can someone help me?

  The upper left on the LiveView LED continues to flash red and green while the screen looks like this:

  

  I use the LiveView daily as my wrist watch and I'm pretty mad at myself for even thinking to update.

  OK so I would check.

  1.) on your bluetooth settings click on detectable peripheral make and start pairing again.

  (2.) your liveview and liveware applications are up to date? try to clear the application data. Settings > apps > manage apps > Search tap apps on clear data.

  3.) you already odd devices? try to clear the data of Bluetooth even above procedure.

  4.) try to re update your camera liveview.

• After that 16 updates have been installed (most important) now my computer is running slowly and stalls, takes to always load anything... What is going on?

  I had 16 updats that microsoft said was important... OK update all now my computer runs very slow and short freezes... was working fine until it updates?

  Hi Valerie Krueger,

  Welcome to the Microsoft community. Looks like that after that the updates have been installed, the computer is running slowly. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2. what security software is installed on the computer?

  Method 1.

  Difficulty of Windows system performance slow computer problems: http://support.microsoft.com/mats/slow_windows_performance/en-us

  Method 2.

  How to make a computer faster: 6 ways to speed up your PC: http://www.microsoft.com/atwork/maintenance/speed.aspx#fbid=ke2GRxcvRz-

  Slow PC? Optimize your computer for maximum performance: http://www.microsoft.com/athome/setup/optimize.aspx#fbid=p871fE9bGeH

  Important: while performing the check disk on the hard disk, if bad sectors can be found, then check disk will try to repair this sector. All the data available in this area may be lost.

  Warning: him reset Internet Explorer settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  I hope this helps.

• Can't make a HD video, after that I updated the product? and there is that a message says it can't encode video and will have to change the settings to try again!

  Can't make a HD video, after that I updated the product? and there is that a message says it can't encode video and will have to change the settings to try again!

  jilll

  What version of Premiere Elements you use, what computer operating system?

  What would you update... have you had 12 and 12.1 updated or have you 13 and 13.1 updated? Or did you upgrade may 14 from a previous version?

  Where are you in the settings for your version where you get the message saying you cannot encode the video and you may need to change export settings?

  What is your planned export?

  Please explain, give more details.

  I will review your wire in the morning morning look to follow so that I can help you succeed in your Premiere Elements project.

  RTA

• No option to print duplex/two-face, after that I updated and updated my laptop

  I have windows 8. My laptop was not working properly so I decided to "regenerate" and update in the process. After the update, I tried to print a document from Microsoft word and printing set up for my printer was different and it didn't show me the double-sided printing option / duplex. ): How to fix this? I want to save paper. Thank you.

  You will need to go to the website of society of printer and download the printer driver for your printer.  Without this driver, only the "naked basic functions" will work.

• After that I changed the apple ID password I can not connect to facetime

  After that I changed the apple ID password, I can not connect to facetime

  Update your password for Facetime, too.