After the connection UI is not completely loaded

Similar Questions

• Recovery CD does not completely load.

  I just replaced the hard drive and the recovery CD does not completely load. After having ejected the second CD, the file loading process stops at 12%. There is no error message and I welcomed as much as 5 hours for the load file to complete, but it remains at 12% after the first 30 minutes. HP Pavilion dv7-4165dx, Windows 7

  Well - here I answer to my own problem in case someone else has the same problem.  The second disk files recovery finally finished loading after 20 hours of waiting!  I spoke to two different technicians to support HP on the phone and neither one of them told me that it could take a long time to load the files!  One of them had me arrested and again after about 40 minutes of waiting.  I found it totally by accident after having frustrated and leaving it just stay there all night. Amazing!  The rest of the restore procedure went well after that - I think.  I'm always load all other software, files and updates, 2 days later.  The hard drive on this dog only lasted a year.

• Not completely loading of SWF

  I have a flash 8, as Web 2.0 site that loads SWFs into a clip of content. Everything works well except for my photo gallery. The swf file does not completely load on the first click. But if you click on the gallery button a second time, it's all charges. In addition, once inside the Gallery, I have a gallery_container clip that loads the different photo albums. They also generally do not charge completely on the first click.
  
  My SWF files do not have frames after the load and display the image, so I don't know why it is not end of the action.
  
  I tried to solve this problem for weeks. I would really appreciate the help.
  
  Here is the site where you can see this problem in action:
  
  http://www.soultoneamps.com
  
  Click "enter".
  
  then "Gallery".

  I solved this problem. If she is here for anyone else who might encounter the same problem:

  I had too many complex elements of loading in an image and in a single layer. Even if I got a stop (); in this image, all items not can load on the first click.

  I changed my fla file as a button is added in a progressive frame and layer at a time. Worked like a charm. Yay!

• Share of software Flip does not completely load due to not write the script of window installation package

  Part of Flip software does not completely load on windows vista... error message windows package install will not write script to complete the installation

  Hello hedubang,

  Thanks for posting on the Microsoft answers Forum.

  I suggest to try the safe mode and see if you can install it in safe mode or if there is a conflict.

  Start the program in safe mode

  1. reboot your computer and start pressing F8 on your keyboard. On a computer that is configured to start to multiple operating systems, you can press the F8 key when you see the boot menu.

  2. when the Windows Advanced Options menu appears, select Safe Mode, and then press ENTER.

  3 log on to Windows by using the administrator account or any account of a user with administrator privileges.

  Note: In Safe Mode, your display system and the Bureau will look and perform differently than in Normal Mode. This is only temporary. To return the system to Normal mode, we can simply restart the computer.

  To determine if the problem that occurs with the program is caused by another program that is running in the background, we recommend that you restart the computer in safe mode and then test the program. If the program runs correctly in safe mode, but does not properly run in normal mode, it probably is another program that is conflicting with the program in question.

  To determine which program is causing a conflict with the program in question, we recommend that you perform a "clean boot" of the computer. A clean boot is designed to disable programs and services in the background as much as possible. This helps determine which service or program can be the cause of the problem.

  For more information about how to perform a clean boot for troubleshooting, click the number below to view the article in the Microsoft Knowledge Base:

  929135 (http://support.microsoft.com/kb/929135/) how to solve a problem by performing a clean boot in Windows Vista and Windows 7

  I hope this helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• When I click on file--> information about the file, I get this msg "Cannot complete the File Info command because the metadata library could not be loaded."?

  When I click on FILE-> FILE INFO in Photoshop, I get this msg "Cannot complete the File Info command because the metadata library could not be loaded."  He works in bridge, but not in Photoshop.  Used to work in Photoshop, I think that before the last update.  What gives?

  FINALLY, there is a new update to Photoshop.  I downloaded it, and the problem is solved!

• I'm unable to install Adobe software licenses after the connection. It is said that it does not recognize my username after login.

  I'm unable to install Adobe software licenses after the connection. It is said that it does not recognize my username after login.

  Yes.  and?

• Password element is is not clear after the connection.

  Hi Experts,
  
  Please help solve this problem.

  I have two pages
  1. Login Page  contains two items 
        P1_LOGINNAME - Textfield  
        P1_PASSWORD - Password
  2. Data entry form created using page items.  - This page is used to create new users
   This page contains many items but issue with only two items.
        P10_LOGINNAME - Textfield  
        P10_PASSWORD - Password
       These items are used for creating loginname and password for new user.
  
  
  When i am logging with admin user ,Chrome browser prompts for save password or not save password
   1. When i am logging with save password option then 
       LOGINNAME and PASSWORD of Login page is reflecting on the LOGINNAME and PASSWORD of Data entry page.
  
  so how can i clear the LOGINNAME and PASSWORD item on Data entry page after login.

  I tried to empty these fields after the connection

  document.getElementById('P10_LOGINNAME').value = '';
  document.getElementById('P10_PASSWORD').value = '';
  
  // This is working in Firefox but not in chrome.

  APEX Version: 4.1
  Database: 10g
  
  Please help me on this.
  
  Thank you and best regards,
  Jitendra

  Hi jitendra,.

  You can do one thing, change your password to a textfield field and type this code in its attribute:

  onclick="document.getElementById('pw').type='password';
  document.getElementById('pw').value='';"
  

  PW is the name of the field, select your domain name.

  see if it works for you.

  Kind regards
  Tauceef

• Facebook: ssl_error_illegal_parameter_alert and does not completely load friends comments

  often we get the above error.
  Games won't load - and now messages from friends are not completely loading.
  I have reset FF - uninstalled - and reloaded. Now, I suffer from withdrawals of Scrabble.
  Help!

  A few other users have reported that the error 10 days ago.

  • Possible problem with Kaspersky: I have updated FF26 and get the following error message "Secure connection failed" why is that?
  • Cause unidentified: Facebook games does not, the error message was even SSL rejected a unacceptable content handshake message. (Error code: ssl_error_illegal_parameter_alert).

• After removing the Tdss rootkit, computer laptop My Windows Vista Home Premium keeps restarting after the connection. __

  I had the Tdss rootkit on my laptop and removed using TDSS Killer of Kasperky. After the reboot, I have connected and saw a box that displays "Please Wait". After 5 to 10 seconds, my computer restarts. After the reboot, it shows options for Windows Vista loading, i.e. the safe mode, safe mode with network. I chose the mode safe mode with networking and everything works fine. The system properties box opens automatically. When I try to boot into normal mode, he repeated restart after the connection. I tried to run a restore of the system into safe mode with networking, but it tells me something about the system restore is in mode offline. I hit a brick wall and don't know what to do next. I don't want to if I have more options to factory default restore.

  The TDSS rootkit is very destructive.  It is not uncommon to make a computer work is not properly after removing it.  I advise you to restore your computer to factory default.  Not only is this the best option, it's the safest option.  I wouldn't consider the computer to be trusted without going through the restore process.  Even if you can be sure that 100% of the infection has been removed, you have no way of knowing what changes the malware made to the settings on your computer, which may be exceptionally vulnerable to future malware attacks.

• T42 - stop and restart after the connection

  My T42, running on Windows XP, suddenly stops right after the connection and while the hotkeys on the loading screen.

  A message in white letters on a blue screen starts like this:

  "A problem has been detected and windows has been suthdown to prvent from damage to your computer.

  IRQL_NOT_LES_OR_EQUAL

  If this is the first time you've seen this stop error screen, restart your computer. "If this screen appears again, follow these steps:

  And the product message points to check any new hardware or software installation. I have not recently installed a software or hardware, so I'm a little lost on how to proceed from here.

  No clue on what could be the problem or any recommendation, short doing a full recovery from a recent backup?

  Any help will be much appreciated. Thenks.

  = UPDATE =.

  After running a few tests using the blue Access IBM button and PC Doctor 2.0 running, memory tests have shown the following results:

  Fast memory - all sockets - failed

  Fast memory - Support 1 - spent

  Fast memory - take 2 - failed

  This seems to indicate that one of the two memory is faulty. This hypothesis is correct?

  If so, what should be the next step? My laptop is out of warranty. I should bring it to a repair shop, or could I order the replacement and install it myself easily?

  I am not versed in repairs to equipment and feel a bit discouraged to start to mess with storage media...

  Any advice, please?

  Thank you

  It is probably a faulty stick of RAM in the second location rather than the power socket. Best bet is to remove the module RAM then see how it goes.

  Second is really easy to access. It is under the laptop - there is a small door in the middle of the base set with a single screw. Remove the screws and remove the door to expose the RAM module. Pull the wire staples on the outside of the restraint SODIMM socket and the RAM module should appear and then remove. Replace the cover and try the laptop again.

  IF you must replace the T42 uses to off the shelf of a DDR SO-DIMM, PC2700 speed RAM - needs. Will take up to a 1 GB module in each socket. First is harder to do because he must remove the keyboard to get home. It is only 4 screws but can be a bit tedious for a novice.

  Edit: The instructions for IBM appropriate here: http://www-307.ibm.com/pc/support/site.wss/MIGR-46513.html

• having suddenly emits turn off my computer as well as the questions after the connection

  It started randomly a few days ago.

  When I stopped everything simply is not extinguished. It will let 10-30 minutes and just restart and brings me back to connect. After the connection of that my computer strikes a blackscreen im could not use the mouse and enter the Manager tasks, but nothing else, after a minute or two my bottom and loading of the task bar and I can use my computer normally.
  what I can tell you is...
  I started in safe mode and this didn't happen.
  I ran msconfig and disabled all non-microsoft processes and it is happened
  I opened the event viewer and there seems to be a large NUMBER of critical errors from the night, I first shut down my computer and contained errors (25/08/2012 around 11:30)
  looks like this https://www.dropbox.com/s/1rkitvaaq69rlkq/Lucas-pc%20events.evtx (tell me if you can show that)
  Also I tried to restore my computer to the 24, but he won't do it for some reason any.
  Im running windows 7 64 bit edition Home premium
  16 GB of ram
  Intel 3, 5 GHz 17-2700 k
  2 x radeon hd 6870 in crossfire

  Hello

  1. have there been recent changes to the computer before the show?

  I suggest to follow the steps provided and check if it helps.

  Method 1: Try turning off the auto reboot on the computer.

  a. right click on computer.
  b. click Properties.
  (c) advanced system settings.
  d. Advanced tab.
  e. startup and recovery settings.
  f. uncheck automatically restart.

   

  Method 2:
  The problem can also be caused by your security such as anti-virus program or a firewall of Windows /Defender that can have conflicting parameters as to not not to perform certain tasks. I suggest you temporary disable antivirus and firewall and check the result again. You must activate new security that you was disabled programs.

  Disable the antivirus software:
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3: Why my screen is black when I start Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  Method 4: as make that you followed the exact steps from the link.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

   

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Hope this information is useful.

• After the blackout, VMs will not start and Vsphere Client cannot be re management/access / start VMs on a physical server.

  After the blackout, VMs will not start and Vsphere Client cannot be re management/access / start VMs on a physical server.

  Get the error message...

  [	[: start: W: 1] 2016-06-09 14:41:36.562 Log for vSphere Client Launcher, pid = 4532, version = version 5.0.0 = build-455964, option = released
  [	[:QuickInf:W: 6] 2016-06-09 14:42:20.421 the value of the search dll C:\Program Files\VMware\Infrastructure\Virtual Infrastructure Client\5.0 path
  [	[:QuickInf:W: 6] 2016-06-09 14:42:24.281 load shared dll: C:\Program Files\VMware\Infrastructure\Virtual Infrastructure Client\5.0
  [	[ : start: w: 6] 2016-06-09 14:42:41.406 Log for vSphere Client, pid = 4532, version = version 5.0.0 = build-455964, option = release, user = root, url = https://192.168.10.200/sdk
  [	[:ShowExcp:W: 6] 2016-06-09 14:42:42.406 error: an internal error has occurred in the vSphere Client.

  Details: The initializer for type for 'VirtualInfrastructure.Utils.ClientsXml' threw an exception.

  Contact VMware support if necessary.

  System.TypeInitializationException: The initializer for type for 'VirtualInfrastructure.Utils.ClientsXml' threw an exception.

  at VirtualInfrastructure.Utils.ClientsXml.FetchIfClientsXmlExists (String serviceUrl)

  at VirtualInfrastructure.LoginUtils.LoadMatchingVI (String serviceUrl)

  at VirtualInfrastructure.LoginUtils.CreateNewService (String serviceUrl, ClientSpec clientSpec, Boolean waitForTopology, Assembly / viAssembly)

  to VMware.Vim.Client.VimClient.StartUp (2 specMap, String [] arguments dictionary, Manager of LoginEventHandler)

  to VpxClient.UI.InitializeVimClient (dictionary 2 specMap, String [] arguments)

  to VpxClient.UI.StartUpIfNotMultiVcSecure (dictionary 2 specMap, SecureString password, String [] arguments, LoginEventHandler Manager, String, dllPath, list 1 listOfVcUrls)

  System.TypeInitializationException: The type to 'VirtualInfrastructure.Utils.TypedXmlSerializer ' 1' initializer threw an exception.

  to VirtualInfrastructure.Utils.TypedXmlSerializer'1.ctor)

  to VirtualInfrastructure.Utils.ClientsXml... cctor()

  System.IO.IOException: The process cannot access the file "C:\Documents and Settings\XXXXUSERNAMEXXXX\Local Settings\Temp\nyhn4bev.dll" because it is used by another process.

  ...

  to System.Xml.Serialization.XmlSerializer... ctor (Type type)

  to VirtualInfrastructure.Utils.TypedXmlSerializer'1.cctor)

  -End of the exception stack trace internal-

  -End of the exception stack trace internal-

  After many unsuccessful attempts tried to connect Vsphere client, the client has finally connected and was able to on all virtual machines. Thanks to Luciano Patrão for study. For all in the community, peace out...

• Firefox and Safari are not completely load some sites, but Chrome is. Why?

  Tonight, I noticed that some Web sites have been does not completely load on firefox. I tried to use Safari to see if it was a firefox problem, but he had the same problem. However, when I loaded the sites on Google Chrome it worked fine.

  I tried to reset firefox and clear cache, but it did not help so I uninstalled and reinstalled but it still doesn't load these web pages correctly. This just shows that constantly trying to load and pieces of the site are missing or broken. I'm on a Mac using Mountain Lion. I've updated the Java plug in, but it does not seem to have done anything to improve the situation.

  Alternatively, you can try to disable IPv6.

  • http://KB.mozillazine.org/Error_loading_websites

  You can try to reset (power off / on) of the router.

• Microsoft Office 2007 student does not completely load

  I tried to get my Office 2007 student 60-day trail to load but it get back to me with the message:
  Microsoft Office Student 2007 is not completely load.

  Please can someone tell me what to do thanks

  Hello!

  Here is a user to user of Toshiba forum and I think that it is a problem of Microsoft. Then I would contact Microsoft technical support.
  There may be something wrong with the website or something.

  Good bye

• 7.0.0.102 crashes immediately after the connection

  After update to Skype 7, it crashes immediately after the connection.

  I don't have facerig or FFsplit or any webcams. Update of Windows Firewall is disabled.

  The event logs show this:

  Name of the failing application: Skype.exe, version: 7.0.0.102, time stamp: 0x54897add
  Name of the failed module: Skype.exe, version: 7.0.0.102, time stamp: 0x54897add
  Exception code: 0xc0000005
  Offset: 0x00d527d7
  ID of the process failed: 0x1e7c
  Start time of application vulnerabilities: 0x01d029890c579caf
  The failing application path: C:\Program Files (x86)\Skype\Phone\Skype.exe
  Path of the failing module: C:\Program Files (x86)\Skype\Phone\Skype.exe
  Report ID: 58eb96c6-957c-11e4-aae2-00224d806fdf

  Any ideas that I can do to make it work again?

  I don't know, but maybe it's one of several cases in the latest version of Skype 7.0 is not able properly to interpret data from the BIOS. At least, that was the issue with the cases already reported with this error message:

  Exception code: 0xc0000005

  Offset: 0x00d527d7

  A fix may be available in one of the next versions of Skype. In the meantime, the solution is to uninstall version 7.0 and install the 6.21.0.104 previous version.

  http://download.Skype.com/MSI/SkypeSetup_6.21.0.104.msi