After the reboot, I'm still at 10.11

Similar Questions

• I missed the path JDK8 for Mobile Application Framework (MAF) after the reboot of the JDeveloper... How can I fix this JDK8 path?

  Hello

  I missed the path JDK8 for Mobile Application Framework (MAF) after the reboot of the JDeveloper... How can I fix this JDK8 path?

  When you try and create a new application of MAF it will prompt you to insert the path JDK8.

• [SOLVED] stuck after the reboot: "vmkapei loaded successfully."

  Hello

  After a new installation of esxi 5.5 my system doesn't seem to work properly after the reboot of the host.

  When the installer has been done with data warehouses and other settings I wanted to passthrough my graphics card and so to reboot the host before you add the card to the host

  was necessary.

  The problem is now that esxi is loading/starting all systemfiles is just stucks "vmkapei loaded successfully" and restart manually doesn't seem to help either.

  Same problem on key usb and SSD

  I also used "formatwithmbr" to be able to install esxi.

  Specifications of the server;

  Mobo: Asus P9D WS

  CPU: Intel Xeon 1220v3

  RAM: Crucial DDR3 ECC 2x8GB (CT2KIT102472BD160B)

  GFX: Gigabyte Radeon R7 250 1 GB

  SSD: Samsung EVO basic 840-Series 250 GB SSD

  PSU: Shut up! E9 directly power 500W 80 + Gold

  If you don't have a GPU and do passthrough, you will lose the console after booting, which is completely hormaux and waited.

  If you want to keep the console, you have two options:

  1. install an another GPU.

  2. do not passthrough the GPU only.

  The ESX will work without a console, you just need to use SSH to do administrative tasks that you would normally do on the console.

  Linjo

• Red hat enterprise linux rhel 6.4 64 bit vm machine installation successful but after the reboot shows BLACK SCREEN

  I'm under vm workstation 10.0.1 on Windows 7 Ultimate 64 bit, I created a VMware machine in my computer using Media 6.4 RHEL, after all, installation has been completed successfully, The RHEL installation wizard suggested to restart, after restart, the virtual machine shows BLACK SCREEN WITH CURSOR of A in the upper left. FYI my system supports the "virtualization technology intel. Please help, if someone solved this issue. Thank you.

  Thanks for help.

  The problem has been resolved. As I said I was installing OS and then the problem comes after the reboot.

  I selected all the graphics software during the installation of linux. and it worked.

• Intermittently after the reboot, the option "Hide when minimized" in the Task Manager Win XP is too effective; the CPU usage icon does not appear in the notification area. Sometimes restart heals, sometimes not.

  The Options menu of the Windows Task Manager includes "hide when minimzed ', to display an icon in the area of notification, but not on the traskbar. I leave that option checked all the time to control the percentage of processor; but sometimes without apparent cause, after I reboot there is no icon in the area. Is there a way to fix this?

  Hello ronks,

  Thank you for visiting the Microsoft answers community.

  The reason for which the icon is not in the system tray is because the Task Manager is closed not minimized when you start your computer. To do this, you could do the following:

  -Go to my computer > C: > Windows > System32
  -Locate in Taskmgr
  -Create a shortcut > right click on the shortcut > click on cut
  -Navigate to my computer > C: > Documents and Settings > username (your username) > Start Menu > programs > startup
  -Paste in the startup folder

  -Right click on the shortcut > click Properties
  -Less run > pull down the menu and select Minimized > click OK > close window

  Now every time that you restart the Task Manager will be launched in a minimized state.

  Hope this helps Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• EA6500 do not save IP/changes of classes there after the reboot

  Hello

  I'm trying to put up EA6500 with the latest firmware installed (1.1.28.147876). Under Local network - connectivity, I fixed router details (address IP/mask) and DHCP pool several times, you click on apply, received a message telling me how the router applies settings and this may take a few minutes. This is not fortunately, but after internal application of the network of these parameters has yet 192.168.1.0/24... It ends with a new random C class of the range 10.0.0.0/8. What the...?

  I suspect changes router internal IP range after each reboot of the device. This behavior may not be normal... but more I read about the EA6500... is not the router. -Suggestions, I actually do something wrong here?

  Oh - the EA6500 is configured to get internet via DHCP, it should get an IP address of 192.168.1.0/24 - modem works as a router also and there is no need of EA6500 make another PPPoE connection. As access to the network is concerned, it does not work. But I really don't like this changes to the internal network IP range...

  Because it appears that you are trying to cascade LAN-to-Wan, the router is detecting a conflict of IP address and changing automatically within the 10.x.x.x range. It's normal. The EA6500 trying to tell you that you have not configured it correctly. So he had to resort to setting up itself.

  If you want to change to the 192.168.x.x, then follow the instructions for editing cascading of a router linksys to another router below. Most of the people just change the local of the EA6500 to 192.168.2.1 IP address if they try LAN to Wan to a DSL modem/router in cascade. Change the DHCP of the EA6500 to 192.168.2.100 Beach - 149

  http://KB.Linksys.com/Linksys/UKP.aspx?pid=80&VW=1&articleid=3733

  If you want to use your EA6500 as your main router, then you have to put your DSL modem/router in bridge mode and then change the type of Internet connection on the ea6500 in PPPoE.

• Z3 compact 'No SIM card' sometimes happaned. After the reboot, it becomes normal

  Hello

  Recently, I have problem with my SIM with the Z3. Sometimes, it only says "no SIM" after using for a while. I can't call and no mobile network. After I rebooted, it becomes normal. I hope that's not the hardware problem. Could you give me some suggestions or solution?

  Thank you.

  I had a similar problem with a Samsung phone. Turns out it was the SIM that was defective from oxidation. You should try another SIM card for a few days to make sure. Generally to replace the card SIM is free, if you can you should so request a new one, especially if your signs of oxidation. If it is not the SIM card, then this is the contacts inside the phone.

• Re-Setup does not continue after the reboot during installation

  I am trying to install windows vista on my laptop for a USB DRIVE.

  1. that I start my USB drive
  2. Enter the language settings
  3. choose clean install
  4. reformat my drive
  5. Windows Installer files & then restarts
  6. I get an error indicating that some vmsraid file is missing!

  SO I think that the boot manager not continues on the installation after restart! Why the hell vista needs to restart during the installation!

  PS > before starting the whole installation procedure, I got a similar error saying a file was missing

  and just for the knowledge base: vista worked FINE until I visited a site and got a paladin antivirus and then I tried a lot of things and I saw a startup folder and in it, there are AB, records etc. AC, which I think would have been absurd so I tried to delete the thembut they wouldn't, so I renamed the startup folder and ffff. and then from then on, I got an error after a reboot! so I decided to do a clean install of vista!

  Hello shez1983,

  Yes, if you have a 3 GB of RAM on your computer and 2 sticks. You can try to remove one of the RAM stick and check if the installation goes through.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Event log of compensation after the reboot (storm)

  Hello

  One of my users is to have an exception "does not" my app that requires a reboot. However, after it reboot it appears that the event log is disabled. Is there a setting to force an event log persistent?

  The event log must remain after a reboot. However, it's a finite size and the oldest entries are allowed out when new is added and there are many connected to the start. Then references to your application can be removed when the user reboots.

• ESXi host sees no data store after the reboot

  Hi all

  I'm new to the community and ESXi itself.  Everything has been working great until today when I rebooted my host.

  I installed it on a Dell T110 server, we had in the back for testing.  It has a 250 GB HARD drive installed in the case.  ESXi installed fine and I had 220 GB or more storage at my disposal.  Multiple VM installed, and once again, everything seems to work properly.

  Today, I wanted to activate usb passthrough for a Server 2008 VM I installed it, I went through the process and had to reboot the host at the end.

  After the restart, he seems to have forgotten the HARD disk that is installed and is no longer, I see my store data or virtual machine access I had running.

  There are a couple screenshots attachedthat screen what I see.

  Thanks for any help or advice!

  Is this the same controller that is attached to the 250 GB HARD drive? Passing the controller to the virtual computer may have unpresented it host, then you won't be able to access and to store configuration settings. Since this is a test system you can consider / try to run "Reset System Configuration" from the DCUI. If this does not work, you may need to reinstall ESXi of CD (the VMFS retaining of course data store).

  André

• Some ESX4 configurations are lost after the reboot of the system

  Hi people,

  I use ESX4 server for months.

  Lately, after creating a few Pools of resources (RP) and the addition of virtual machines in the pool, I noticed that after rebooting my system, I lost all the Resource Pools, I created.

  This problem of loss of configuration is not only limited to the RPs, I also lost some of the configurations of the network/portgroup after system reboot.

  This problem is is produced as well when I entered "Maintenance mode" and then then rebooted the system;  and also when I typed the command "reboot" in the bash shell (I typed 'reboot' command 'sync' several times before typing.)

  This problem becomes a kind of annoyance since I have to re-create the lost configuration each time that I reboot.

  Is it possible to manually force the ESX4 to save the configuration for that I do not keep losing part of my configurations?

  Could someone please help?

  Thanks in advance.

  Danny

  Really glad its sorted for you, as I said, I saw the question before at a customer's site and you will never know that the root is full, except if you look in the service console. It would be good to have this visible through the vi client, but in the meantime it just added monthly controls!

  Thank you

  Dan

• After the reboot of the Standby

  Version: 10g Release 2
  Platform: AIX 6.1
  Standby mode: physical standby
  
  Our system Admins will schedule (crontab) monthly restart the standby DB server. After each restart, we the eve DB to go up and redo apply services must be started. That is to say. In our database awaiting, we need run the 2 commands automatically after each reboot the server below

  startup mount;
  alter database recover managed standby database disconnect from session;

  What do you guys to deal with this scenario?

  Hello;

  You have two numbers (three Admins counting system)

  1. you should cancel the recovery and stop the day before before they restart.
  2. you want to start to go up and start the recovery.

  I would probably change this to call a custom start and stop

  if [ ! -f $ORA_HOME/bin/dbstart ]
  then
      echo "Oracle startup: cannot start"
      exit
  fi
  
  case "$1" in
      'start')
          # Start the Oracle databases:
          # The following command assumes that the oracle login
          # will not prompt the user for any values
          Call Custom start here
          ;;
      'stop')
          # Stop the Oracle databases:
          # The following command assumes that the oracle login
          # will not prompt the user for any values
          Call custom stop here
          ;;
  esac
  

  Do you you use different script names to avoid conflicts.

  Best example:

  http://AIX-UNIX.blogspot.com/2010/05/How-to-shutdown-and-start-Oracle-with.html

  Best regards

  mseberg

• Printer works only after the reboot or shutdown

  I use win xp sp3 computer. My only works only after the restart or shutdown. If I reinstall the printer driver, then it will work. I have reinstall win xp but similer happen again. I scanned my system with kaspersky. But no change. I need a permanent solution. Please help me...

  Hi Pierre,.

  1. what exactly happens when you try to use the printer?

  2. you receive messages or error codes?

  3. What is the brand and model of your printer?

  Method 1:

  You can try to start the fixit printer and check if it helps:

  Diagnose and automatically fix problems printing and printer

  Also see the article and check:

  Resources for the resolution of the printer in Windows XP problems

  Method 2:

  You can check the event viewer to learn more about the problem.

  Procedure to view and manage event logs in Event Viewer in Windows XP

• After the reboot, I get Windows Vista build 6002 this copy of windows is not genuine, but the system... activation seems to be

  After a restart/virus scan (after the large recent Windows Update Microsoft), I see on the background one right part of my screen:

  Windows Vista (TM) Build 6002 this copy of Windows is not genuine.

  I looked at the system screen and it shows only: Windows is activated.

  I ran Microsoft Genuine Diagnostics tool, and it shows:
  Validation status: genuine
  Validation code: 0

  N/a for resolution state (probably because he thinks that the installation is correct).

  Don't know what the issue is here?  Does anyone know a fix for this?  I would rather have not shut down the system after 30 days of work!
  Thank you!

  According to the report that you have posted, you should not see a non-genuine problem - the report is clean.

  If you are indeed to see a non-genuine notification, then is that from time to time, or is this all the time?

  If it is present only from time to time, you have a race condition - and those can be a nightmare to solve, because they disappear as soon as you look at :) They are often caused by antivirus programs in conflict with other programs running

  If it is there all the time, then try the following.

  Vista license store is perhaps damaged or its data can be ruined somehow. Please try the steps below to re-create the store with the correct data.

  (1) open an Internet browser window.
  (2) type: %windir%\system32 in the browser's address bar.
  (3) find the CMD.exe file
  (4) make a right click on CMD.exe and select "Run as Administrator"
  (5) type: net stop slsvc (it may ask you if you're sure, select Yes)
  (6) type: cd %windir%\ServiceProfiles\NetworkService\AppData\Roaming\Microsoft\SoftwareLicensing
  (7) type: Rename tokens.bar tokens.dat
  (8) type: cd %windir%\system32
  (9) type: net start slsvc
  (10) type: cscript slmgr.vbs - FLIR (it may take time for this will be complete, please be patient)
  (11) restart your computer twice.
  (12) you may need to enter you product key and activate it.

• Printers (FAX and HP Universal PCL6) display offline after the reboot for 2 minutes

  Hello

  About 1 out of 10 times all the connected printers (FAX and HP Universal PCL6) are displaying offline for about 2 minutes.

  I already disabled SNMP for the HP driver and set service "Windows Driver Foundation - User - mode Driver Framework" between manual and automatic.

  The system is to be used in an environment where the user prints a report shortly after the system starts. When the printer is offline, this will confuse the user (it is a device used by users without good knowledge of PC).

  No idea how to solve this problem?

  Thank you very much for your comments!

  Andreas

  Hi Andreas,

  Glad to know it's working now.

  Yes, you can set it to manual.

  The police Windows Cache Service optimizes the performance of applications by caching the data in fonts. The applications will start this service if it is not already. It can be disabled, although doing so will degrade the performance of the application.

  anyway you are not stopping the service to run so well so what if you're not facing problems with programs or applications.

  In the future, if you have problems with Windows, get back to us. We will be happy to help you.

  Thank you.