After trying to connect to the internet error message knows unidentified network

Similar Questions

• Unable to connect to the Internet error message, "(serveur DNS) does not". "

  Original title: connection to the Internet.

  I am really a novice in computer science.   The wifi signal is strong and I'm connected to the internet, but I can not connect or when I do connect it falls to me as soon as it connects.  Where is my problem?   the only statement I received is that the computer is configured correctly, but the device or resource (DNS server) does not.   Can anyone suggest what to do next?

  Hello

  This problem may if the router is not configured correctly or if the TCP/IP settings are incorrect.

  1. What is the brand and model of the computer?

  2. when, exactly, you get this error message?

  I suggest you try the procedure described in the article and see if it helps.

  Error message "your computer seems to be configured correctly, but the device or resource (DNS server) is not responding" in Windows 7
  http://support.Microsoft.com/kb/2779064/en-us

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Error 651 trying to connect to the internet

  I am running Win7 Home Premium and and I get a 651 error trying to connect to the internet. I replaced the file rasppoe.sys with an another working Win7 pc, but this did not help. I also tried the same file from a Vista laptop but still no joy of work.

  I also disabled the connection of ivp6 nothing helps

  I use Virgin Media as my ISP access and you connect using a network modem.

  Any help would be appreciated I'm going crazy trying to fix it.

  Thanks in advance

  Is it only started recently? You have McAfee? McAfee has been updated at the same time as the last batch of updates from Windows 7 and this is the cause of problems of internet connection for most, if not all, users of McAfee.

  See the communication from this "criticism" - McAfee

  Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

  You should make the fix McAfee, if necessary. There are corresponding communications for their enterprise products.

  I had to run the McAfee removal of Development tool a few times before and it caused a problem with the license if the PC was not connected to the internet during the abduction. Due cat of McAfee support reset their files in order to allow the relocation-reactivation. Here is their link cat - McAfee - media contains the link to the cat

• Trying to connect to the internet after the failure of hardrive.

  I am trying to connect to the internet after that I wiped recently my hardrive due to the blue screen of death, I use a card of d-link airplus dwl-520 if I need to install some programs that I consider ive got no program on my ill try machine any option avalible please help! If you need more information just ask.

  asz1977,

  As I sad to PCN00B159 go to your computers to build and download the driver to your computer and see if the difficulty of the question.
  Please rate me upward if you find my post helpful. Thank you!

• When you connect to the internet error code 678 appears. What can I do to fix this?

  I get the error code 678 when trying to connect to the internet.

  With the help of a new modem D-Link DSL provided for me by my new extreme DSL service provider.

  Have Windows XP Professional installed on my machine.

  I downloaded the updated drivers for my network n-force Nvidia card.

  When I try to connect to the internet, I receive error 678 and cannot connect code.

  A run scans regularly for any virus or malware, with none detected using Norton 360.
  In addition to performing other troubleshooting code error 678.
  How can I fix this error 678?
    
  Hello
  You can check this link:
  You may receive error 678 or error 769 when you try to connect to the Internet or when you try to browse the Internet after you install Windows XP Service Pack 2
  http://support.Microsoft.com/kb/892889

• I just got back my computer to its factory settings... and now I amd trying to connect to the internet

  I just got back my computer to its factory settings... and now I amd trying to connect to the internet but it is windows xp and im lost I tried the installation wizard and I still don't know any help would be great

  Hello

  1. how to access internet through hard wired or wireless?

   
  I suggest you to follow the steps below and check if it helps.
   
   
  Method 1:  You can follow the steps mentioned in the link below to make an Internet connection
   
  To establish an Internet connection
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/howto_i_client.mspx?mfr=true
   
   
  Also check out the article below: How to configure Internet access in Windows XP Professional.
  http://support.Microsoft.com/kb/305549
   
   
  More information: You can see the steps outlined in the article below.
  How to troubleshoot possible causes of Internet connection problems in Windows XP.
  http://support.Microsoft.com/kb/314095
   
   
  Hope this information is useful.

• Why can't I download the 9.3 iso upgrade? He always tells me that I am not connected to the Internet and I know that I am.

  Why can't I download the 9.3 iso upgrade? He always tells me that I am not connected to the Internet and I know that I am.

  Apple withdrew temporarily updating iOS 9.3 for devices more old to deal with some issues, what he was creating. Better to wait a few days for them to correct problems.

• Unable to connect to the internet ERROR 678

  original title: Please help me because I get ERROR 678 frequently

  I use a broadband connection on my desktop pc with windows XP SP3, as I tried to connect through windows running phone 7 ultimate, but I was unable to connect to the internet, now even once, I plugged the cable broadband for desktop pc and now I get ERROR 678 , after several attempts to recall that I am able to connect through desktop pc. I have met it 2nd time to do the same procedure for the first time he resolved automatically, but now there's a problem. also contacted the service provider as their laptop to connect to internet with my account but I can't my pc... HELP ME PLEASE...

  Hi Aniketpawar,

  ·         What security software is installed on your computer?

  I suggest you to follow the steps in the Microsoft Knowledge Base article and check.

  You may receive error 678 or error 769 when you try to connect to the Internet or when you try to browse the Internet after you install Windows XP Service Pack 2

   http://support.Microsoft.com/kb/892889

  Let us know if that helps.

• I'm trying to connect to the internet and I am unable to do so. My screen says Internet Explore cannot display this Web page. I missed something in the settings? He sees my wireless and says acquiring network address... but not to go further.

  I tried to diagnose, disconnect and reconnect

  You have left out information such as how you connect to the Internet (cable/DSL? ISP?), the brand of your router, and whether other computers can connect to your router wirelessly with success. Also, we don't know whether there is an initial Setup or if you had this before work and now it just doesn't.

  I'm going to assume that this is the first installation then give you instructions on setting up a safe wireless router. Maybe that will make things work for you. If you need more information, be sure to include all missing information in your next post.

  Setting up a router is simple enough. Normally, you run the CD that came with the router and follow the instructions. But you can set up the router without the CD. Note that if you have Internet cable for the connection you have just set up the router to DHCP (or there may even be a choice of cable to choose). If you have DSL Internet, you select TRP usually and enter the username and password you selected when you initially set the DSL connection. So:

  1. turn off the power to your modem.
  2. attach a class (usually supplied with the router) ethernet cable cat5e Internet/WAN port of the router to the ethernet port on the modem.
  3. connect the ethernet cable cat5e from the network card in your computer to one of the ports on the router. If you do not have an ethernet cable (because you were using USB), you will need to go to the store and buy a.
  4. turn on the modem. After that all the lights are on, turn on the router.

  To configure the router:

  Have a computer connected to the router with an ethernet cable. Examples given are for a Linksys router. See the manual of your router or the router mftr's Web site. for the parameters by default if you don't have a Linksys. Open a browser such as Internet Explorer or Firefox and in the address bar type:

  http://192.168.1.1 [Enter] (it is default IP address of the router, which varies from router to router then check your manual)

  This will bring you to the login screen of the router. The default username is blank and the Linksys default password is "admin" without the quotes. Enter this information. You are now in the configuration of the router utility. Your configuration utility may be slightly different from mine. The first thing to do is to change the default password because * all * known default passwords for different routers.

  Click the Administration link at the top of the page. Enter your new password. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE. Re-enter the password to confirm it, and then click Save settings at the bottom of the page. The router will reboot and show you the box of connection again. Do not fill in the user name and put it in your new password to enter the configuration utility.

  Now, click on the link wireless at the top of the page. Change the network name (SSID) wireless by default to something, you'll recognize. I suggest that my clients not use their surname as the SSID. For example, you might want to name your network wireless network "CastleAnthrax" or similar. ;-)

  Click on save settings and when you get the prompt that your changes were successful, click the wireless security link which is just beside the Basic Wireless Settings link (where you changed your SSID). Most computers purchased during the last 4 years have the wireless hardware that will support WPA2-Personal (also known as WPA2-PSK). This is the desired encryption level. If your wireless hardware is older, use WPA. Don't use WEP, because who is easily broken within minutes. So go ahead and set the Security Mode WPA2-Personal. Do this and enter a password. For example, you could use the password ' here be dragons, beware you scurvy dogs! The password is what you enter on all computers that are allowed to connect to the wireless network. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE.

  At this point, your router is set up and if the computer that you use to configure the router will normally connect wireless, disconnect the ethernet cable and wireless of the computer should see your new network. Enter the password that you have created (exactly as you wrote it with all capital letters and punctuation) to join the network and start surfing. MS - MVP - Elephant Boy computers - don't panic!

• Laptop does not connect to the internet. error cannot display Web page

  Original title: laptop does not connect to the internet. How can I fix it?

  I'm trying to get my laptop to connect to internet, but it will not. It keeps telling me that it cannot display the Web page. The wireless connection is the link and he sees the laptop, but it's like he goes. How can I fix it? Help!

  Hello

  1. Have you tried using anythird party web browser to connect to Internet?
  2. You use Internet Explorer to surf the Internet?

  If you receive error message cannot display Web page in Internet Explorer, then you can check the link below to fix the problem.

  "Internet Explorer cannot display the webpage" error when you view a Web site in Internet Explorer

  http://support.Microsoft.com/kb/956196

  Note:

  Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

• Unable to connect to the Internet, error 8004840 has

  Hi, I have a vista premium edition service pack 2 32-bit windows operating system family, and I can't connect to the internet, plus I get these codes error 8004840a, or 80072ee7 and some times code different, I tried everything but nothing works, any ideas.
  OT:error code 8004840 a
  Thank you
  Francis

  Hi Francis,.

  1. What is the accurate and complete error message you get when you try to connect to the Internet?
  2. you are trying to connect wired or wireless?
  3. don't you make changes to the computer before the show?

  I suggest you try the steps from the following link:

  Wireless and wired network problems
  http://Windows.Microsoft.com/is-is/Windows/network-connection-problem-help#network-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

• Unable to connect to the internet, error: default gateway is unavailable.

  Original title: help

  whenever I use my computer at some point I will get a message that I'm no longer connected to the internet, windows diagnostics will do its thing and fix it, but it keeps well back, he says my default gateway is unavailable. Thank you amber

  Hi amber,

  Let us work together to solve this problem.

  Please answer these questions:

  1. what is the accurate and complete error message that you receive?

  2 what is the make and model of the computer?

  3 you have any third-party antivirus installed on the computer?

  If please try these methods and let us know the results:

  Method 1: Reset WINSOCK TCP/IP IPv4 and IPv6 TCP/IP stack.

  Follow these steps to know how to do:

  a. press Windows + R keys on the desktop, to open the dialog box run.

  b. type cmd and press ENTER to open the command prompt.

  c. type these commands and press ENTER after each line:

  netsh winsock reset catalog which resets the WINSOCK entries to
  default values of the installation.
  netsh int ipv4 reset reset.log that resets the TCP/IP IPv4
  battery installation by default.
  netsh int ipv6 reset Reset reset.log IPv6
  Stack TCP/IP to default installation.

  d. restart the computer.

  Please visit the following link:

  How to reset the Protocol Internet (TCP/IP)
  http://support.Microsoft.com/kb/299357?WA=wsignin1.0

  Method 2: Disable temporarily an antivirus installed on the computer and see if the problem is resolved.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Please get back to us with the results and any other questions you may have about the Windows operating systems. We are happy to help you.

• HP DV6T-1300 lost connectivity to the internet, error display 701

  I have a laptop HP DV6T - 1300 Entertainment who has lost connectivity to the internet, and it displays error 701. All of my diagnostic checks, I think that he has lost the pilot because he does not have a wireless card. I downloaded the drivers wireless (five each) HP support and assumes that the Realtek driver is the original. What is the purpose of all other drivers (Broadcom, Atheros, Wireless & Bluetooth Pro) and they need to be installed or not? They are updated day or improvements or are drivers for the other cards in different models of this computer? I use the laptop for my wife to access the net until I fix this. Thanks in advance!

  After that to install the Realtek driver (original), I discovered that the software does not recognize that there is a wireless card. In my view, the map is part of the motherboard and may have failed. I suspect that my best solution may be to buy an external wireless card and install it. Any suggestions?

  I don't know exactly what happened, but after restarting a couple of times, the wireless card started working again. He works actually better than what he has. The downloaded driver was an updated version, and this may explain the improvement.

  Different cards for different models of different computers in your model class.  You only need the driver for your system.

  The updated driver for your model of correction probably your problem.  The fact that it works better than before is, of course, a plus.

  If you don't already have it, here is the wireless connection manager:

  HP sp54945 V4.1.25.1 Connection Manager

   

  Connecting to a network with the 4.x connection manager

   

   

  For your reading pleasure:
  

  Domestic use Wireless-G and Wireless-N devices on a network

   

   

• eFax: not connected to the internet error

  I have a Photosmart 7510, running on Windows 8 (which shouldn't matter, since my question).  All internet connections are fine, except eFax custody claiming that I am not connected to the internet.  I have tried to change the DNS by hand, reset the cable modem, router, and web services and even to set the printer to the factory settings.  Nothing works.

  Hello

  Try to use another DNS such as Google Public DNS server and check to see if that can help you:

  Set the DNS server in the printer as follows:

  Primary: 8.8.8.8

  Secondary: 8.8.4.4

  Also make sure your location is set correctly, it can strongly influence any web related services.

  You can to set your region of clickign configuration icon, and then select Prefereces.

  Click Set country/region, and then select your location.

  Shlomi

• "The account specified for this service is different from the account specified for other services running in the same process" while trying to connect to the internet.

  Original title: the account specified for this service is different from the account specified for other services running in the same process

  while trying to connect to internet, I get the message "connection status: unknown the account specified for this service is different from the account specified for other services running in the same process" that you start happens out of the blue. When I run the diagnostic and repair tool it says that Windows cannot resolve the problem, contact admin or your ISP. I know that my internet service works very well. I am currently on an e-machine running Windows Vista Edition Home Premium and it connects without problems. My problem is that my most recent top of office (gateway also on Windows Vista Home Premium) receives connection problems. IM connected to the internet (DSL) with the ethernet cable from the Yukon. All the lights are green on the wireless gateway, so I know that the service is very good. Strange thing I noticed, when I go to network status and share and view Gateway desktop computer shows the "Yukon Ethernet controller" as the connection while the e-machine device says Im using "Intel (R) PRO/100VE Network Connection" Im using the same cable (Yukon) and put in place for both computers, so I was wondering what that was all too. Any help is appreciated.

  Hello

  Thank you for writing to Microsoft Communities. From your problem description, I understand that you can not connect to Internet.

  1. have there been recent changes to the computer before the show?

  2. the problem occurs in safe mode with networking?

  Please go ahead and follow the steps mentioned and later a update on the State of the question.

  Method 1: Wi - Fi and in Windows network connection issues:

  http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows?T1=Tab03

  Additional information:

  The problems of Internet connection:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Please follow these recommended steps and post if you still experience the problem.