Error 651 trying to connect to the internet

Similar Questions

• Satellite C660D - error 651 attempts to connect to the internet via modem

  Hello

  I'm so stupid with this stuff so please make all responses for a 3 year old can understand.

  The problem - since a few years, I used a desktop computer and connected to the internet via modem wide empty tape and USB connection. Last week bought a Satellite C660D installed Windows 7 os provided and tried to connect with my modem, but failed miserably.

  I get the error message 651 but do not understand why.
  I use wired ethernet (because my friend does on their laptop) and tried the cable on their system, and it worked very well, so I don't think it's that.

  If someone is kind enough to explain what I do, I'll be able to keep this computer connected to the internet with usb and connect the laptop with an ethernet at the same time, so I can read the instructions while I go or I'll have to print the instructions and disconnect the Office before retrying the laptop? Yes, I'm dumb and I'm not even blonde, lol

  Thanks in advance for those who have the patience to try to help me.

  Hello

  Don t think that it s question computer laptop since many different users of the internet have reported the same error message with different but with pre-installed computers Win 7.

  There is no one-size-fits-all solution for this
  See this page:
  http://techietalkz.com/2009/10/29/error-651-in-Windows-7-a-killer-for-Internet-ConnectionVPN/

  There are several tricks to get this fixed an error
  For example: remove the Microsoft Virtual PC 2007 or disabling IPv6 for your connection.

  You will need to check the unique proposals would be interesting to know what will arrange in your case

• Error 651: Unable to connect to the internet

  I use Windows 7 on a new laptop Dell. However, I can access is the internet using my broadband connection.

  When I try to connect, it tries to connect through Wan Miniport PPPoE, then fails citing error 651.

  A previous post said that this would be fixed if I disabled Hello.
  http://social.answers.Microsoft.com/forums/en-us/w7network/thread/519b794f-3f32-4A0A-8e47-81918243c0b7?Prof=required

  However, I opted to remove it and I still don't have the same problem. I can't download multiple updates, corrections or problems that I can't get online... it basically makes my computer useless.

  No one knows how to fix?

  Hello dookdb,

  Take a look at the link below, this might be useful for you,
  http://ghost301tech.WordPress.com/2009/10/29/error-651-in-Windows-7-a-killer-for-Internet-ConnectionVPN/

• I just got back my computer to its factory settings... and now I amd trying to connect to the internet

  I just got back my computer to its factory settings... and now I amd trying to connect to the internet but it is windows xp and im lost I tried the installation wizard and I still don't know any help would be great

  Hello

  1. how to access internet through hard wired or wireless?

   
  I suggest you to follow the steps below and check if it helps.
   
   
  Method 1:  You can follow the steps mentioned in the link below to make an Internet connection
   
  To establish an Internet connection
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/howto_i_client.mspx?mfr=true
   
   
  Also check out the article below: How to configure Internet access in Windows XP Professional.
  http://support.Microsoft.com/kb/305549
   
   
  More information: You can see the steps outlined in the article below.
  How to troubleshoot possible causes of Internet connection problems in Windows XP.
  http://support.Microsoft.com/kb/314095
   
   
  Hope this information is useful.

• Trying to connect to the internet after the failure of hardrive.

  I am trying to connect to the internet after that I wiped recently my hardrive due to the blue screen of death, I use a card of d-link airplus dwl-520 if I need to install some programs that I consider ive got no program on my ill try machine any option avalible please help! If you need more information just ask.

  asz1977,

  As I sad to PCN00B159 go to your computers to build and download the driver to your computer and see if the difficulty of the question.
  Please rate me upward if you find my post helpful. Thank you!

• After trying to connect to the internet error message knows unidentified network

  Original title: problem connecting (unidentified network) environment.

  A few times my labtop is big when it connects with the Ethernet cable say: unidentified network
  But when I connect it to an another labtop its connect to the Internet.
  I don't know what case, please help.
  Kind regards.

  Hello

  Did you change on your computer before the show?

  Follow the steps mentioned below:

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  It could be useful!

• Unable to access store giving store error: Windows is not connected to the internet

  I got the Samsung R540 laptop series, recently updated OS in my current PC to windows 7 Home Edition premium windows 8 pro, but now, I came to know that I can't access windows store, it gives the error that you are not connected to the internet, also tried to connect to a Microsoft account through it It gives an error 0x800c0008. I tried all the commands cmd and instructions provided in your community.pls help

  Hello

  See the suggestions mentioned here and if they help you:

  http://www.kapilarya.com/cant-open-Windows-store-in-Windows-8

  Hope this helps, good luck :)

• Update iOS 9.3 returns an error message saying "not connected to the Internet.

  WWhen I try to install iOS 9.3 update on my iPad 1, I get an error saying that the softaare cannot be installed b/c ive Ben disconnected from the Internet (or not connected to the Internet)... which is wrong.  I am connected.

  Seems that Apple has temporary problems with their activation servers. Many users report similar problem on older devices.

  Latest news: If you can not activate your iPhone, iPad, or iPod touch after installing iOS 9.3 - Apple Support

  r http://www.IMore.com/Apple-Working-iOS-93-Fix-Older-iPhone-iPad?utm_medium=Slide & utm_campaign = navigation & utm_source = im

  lder-IOS-devices-affected-by-bricking-bug/ http://9to5mac.com/2016/03/24/Apple-releases-New-Build-of-iOS-9-3-for-Users-of-o

  Hoppefully Apple will highlight the top soon

• I'm trying to connect to the internet and I am unable to do so. My screen says Internet Explore cannot display this Web page. I missed something in the settings? He sees my wireless and says acquiring network address... but not to go further.

  I tried to diagnose, disconnect and reconnect

  You have left out information such as how you connect to the Internet (cable/DSL? ISP?), the brand of your router, and whether other computers can connect to your router wirelessly with success. Also, we don't know whether there is an initial Setup or if you had this before work and now it just doesn't.

  I'm going to assume that this is the first installation then give you instructions on setting up a safe wireless router. Maybe that will make things work for you. If you need more information, be sure to include all missing information in your next post.

  Setting up a router is simple enough. Normally, you run the CD that came with the router and follow the instructions. But you can set up the router without the CD. Note that if you have Internet cable for the connection you have just set up the router to DHCP (or there may even be a choice of cable to choose). If you have DSL Internet, you select TRP usually and enter the username and password you selected when you initially set the DSL connection. So:

  1. turn off the power to your modem.
  2. attach a class (usually supplied with the router) ethernet cable cat5e Internet/WAN port of the router to the ethernet port on the modem.
  3. connect the ethernet cable cat5e from the network card in your computer to one of the ports on the router. If you do not have an ethernet cable (because you were using USB), you will need to go to the store and buy a.
  4. turn on the modem. After that all the lights are on, turn on the router.

  To configure the router:

  Have a computer connected to the router with an ethernet cable. Examples given are for a Linksys router. See the manual of your router or the router mftr's Web site. for the parameters by default if you don't have a Linksys. Open a browser such as Internet Explorer or Firefox and in the address bar type:

  http://192.168.1.1 [Enter] (it is default IP address of the router, which varies from router to router then check your manual)

  This will bring you to the login screen of the router. The default username is blank and the Linksys default password is "admin" without the quotes. Enter this information. You are now in the configuration of the router utility. Your configuration utility may be slightly different from mine. The first thing to do is to change the default password because * all * known default passwords for different routers.

  Click the Administration link at the top of the page. Enter your new password. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE. Re-enter the password to confirm it, and then click Save settings at the bottom of the page. The router will reboot and show you the box of connection again. Do not fill in the user name and put it in your new password to enter the configuration utility.

  Now, click on the link wireless at the top of the page. Change the network name (SSID) wireless by default to something, you'll recognize. I suggest that my clients not use their surname as the SSID. For example, you might want to name your network wireless network "CastleAnthrax" or similar. ;-)

  Click on save settings and when you get the prompt that your changes were successful, click the wireless security link which is just beside the Basic Wireless Settings link (where you changed your SSID). Most computers purchased during the last 4 years have the wireless hardware that will support WPA2-Personal (also known as WPA2-PSK). This is the desired encryption level. If your wireless hardware is older, use WPA. Don't use WEP, because who is easily broken within minutes. So go ahead and set the Security Mode WPA2-Personal. Do this and enter a password. For example, you could use the password ' here be dragons, beware you scurvy dogs! The password is what you enter on all computers that are allowed to connect to the wireless network. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE.

  At this point, your router is set up and if the computer that you use to configure the router will normally connect wireless, disconnect the ethernet cable and wireless of the computer should see your new network. Enter the password that you have created (exactly as you wrote it with all capital letters and punctuation) to join the network and start surfing. MS - MVP - Elephant Boy computers - don't panic!

• error 815 unable to connect to the internet, I have

  I am receiving messages saying error 815 cannot connect to the internet, but I am connected. I can surf what I want but these messages keep covering my page so I'm not able to see what Iam do. My server says that everything is ok their end and communicate with microsoft. Help

  Hello
   
  1. don't you make changes to the computer before the show?
  2. what browser you use to access the internet?
  3. the problem occurs with another web browser?
  4. do you have the internet connection wired or wireless?
   
  The 815 error code means that the network connection to broadband could not be established on your computer because the remote server is not responding. This could be caused by an invalid value for the 'Service name' field for this connection.
   
  I suggest to create a new administrator account on the Windows Vista-based computer to solve the problem:
  Steps to follow:
  a. click Start, type the user accountand click on the user accounts Control Panel.
  b. in the user account control panel, click on account manager another .
  c. click on create a new account, type an account name, select administrator, and then click create an account .
  d. disconnection and connection with the new account and establish the connection to check if the problem persists.
   
  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• "The account specified for this service is different from the account specified for other services running in the same process" while trying to connect to the internet.

  Original title: the account specified for this service is different from the account specified for other services running in the same process

  while trying to connect to internet, I get the message "connection status: unknown the account specified for this service is different from the account specified for other services running in the same process" that you start happens out of the blue. When I run the diagnostic and repair tool it says that Windows cannot resolve the problem, contact admin or your ISP. I know that my internet service works very well. I am currently on an e-machine running Windows Vista Edition Home Premium and it connects without problems. My problem is that my most recent top of office (gateway also on Windows Vista Home Premium) receives connection problems. IM connected to the internet (DSL) with the ethernet cable from the Yukon. All the lights are green on the wireless gateway, so I know that the service is very good. Strange thing I noticed, when I go to network status and share and view Gateway desktop computer shows the "Yukon Ethernet controller" as the connection while the e-machine device says Im using "Intel (R) PRO/100VE Network Connection" Im using the same cable (Yukon) and put in place for both computers, so I was wondering what that was all too. Any help is appreciated.

  Hello

  Thank you for writing to Microsoft Communities. From your problem description, I understand that you can not connect to Internet.

  1. have there been recent changes to the computer before the show?

  2. the problem occurs in safe mode with networking?

  Please go ahead and follow the steps mentioned and later a update on the State of the question.

  Method 1: Wi - Fi and in Windows network connection issues:

  http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows?T1=Tab03

  Additional information:

  The problems of Internet connection:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Please follow these recommended steps and post if you still experience the problem.

• Windows Error Reporting service not connected to the internet

  Since the center of the Action, when checking for Solutions is selected, the following error message is returned;

  Problem connecting to the Windows error reporting service.  Some of the reports can not be uploaded to the Windows error reporting service.  Please try again later.

  I had the same problem with Vista and now 7 does too.  Any ideas?  (I know that I'm connected to the internet, as I am posting this...)

  Hello Mr. Merritt,

  Welcome to the Microsoft Answers Forum!

  To solve the problem better, please let us know the details mentioned below.
  (a) if it works well before?
  (b) have you done with the latest changes on the computer?
  (c) is your computer connected to any domain?

  I suggest you to check if error reporting service Windows has stopped working. Try to start the service by following the steps below:

  Click Start > type of search in the services box, press enter > find windows error reporting service in the list of the list of services > right click and then click Start.

  Also run the service as automatic, please follow the steps below.

  Right-click on the service from the list of windows error reporting services and then click on properties > there will be a pop-up screen > check for startup type and select Automatic under drop down menu and apply the settings.

  Also I suggest you to temporarily disable the security software and settings of the firewall and check if it helps you to solve the problem.

  I hope this information helps. Please get back to us if you have any other questions on this subject.

  Thanks and greetings
  Mir - Microsoft Answers Support Engineer                                                              
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads

• I am getting error ' are'nt you connected to the internet "even though my internet connection works fine

  Original title: I was a console game, but now I have decided to intervene to PC games, for this, I downloaded DirectX End-time Web Installer with .NET Framework 3.5 SP1 (FULL VERSION)...

  Why it shows an internet connection every time?, I mean my internet works perfectly, but each time it displays "you are'nt connected to the internet?

  Hello

  Thanks for the reply with more information.

  A large number of variables are involved when you connect to a network: cables, drivers, network adapters and routers. Some common problems are:

  • A switch to wireless network adapter is disabled

  • Airplane mode is on

  • Poorly connected or disconnected cables

  • Wireless standards do not match

  • Missing updates

  • Incorrect network connection settings

  • Damaged or incompatible drivers

  • Hardware or software problems

  Perform the steps from the link below and see if the error Stops appearing.

  http://Windows.Microsoft.com/en-in/Windows-8/cant-connect-to-a-network

  Hope this information helps. Response with status.

• Missing error driver unable to connect to the Internet

  Original title: I deleted a driver

  I deleted a driver for my Wi - Fi accidentally when I was manually cleaning the hard drive. When I try to connect to the internet the computer says missing a driver. any suggestions or guidance on how to reinstall?

  Hello

  What is the brand and model of the computer?

  Method 1:

  If you are unable to connect to the Internet via the wireless connection, you can switch to a wired connection to download the driver or to download the driver on another computer.

  Driver can also installed from driver disk provided by the manufacturer of the computer.

  Method 2:

  You can also perform a system restore to the date when the computer was working fine and check.

  What is system restore?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Important: Restore the system affect the system files of Windows, programs and settings of register that have been changed recently. It can also make changes to scripts, files, batch and other types of executable files on your computer. System Restore does not affect personal files, such as e-mail, documents, or photos, so it cannot help you restore a deleted file.

  Method 3:

  I suggest you visit the manufacturer's Web site and download and install the latest wireless drivers or if you use the link give and check if it helps.

  Tips for solving common driver problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems

  Hope this helps and keep us posted.

• trying to connect to the internet, it connects only "local". I have to power cycle my network to access the internet.

  Connection to the local only when the internet connection is desired.

  Whenever I turn on my laptop & try to connect to the internet, it just connect 'local' so I tunplug the router to the computer & the power of the wall.  Then turn router back on, reconnect to the desktop computer & then it works.  It did not start until last week.  Help, please!

  Hello

  Did you change your computer?

  Method 1:

  I suggest you check in SafeMode with network.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2:

  I also suggest you to follow the link and check.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  I would also update the NIC drivers and check.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly