Unable to connect to the Internet error message, "(serveur DNS) does not". "

Similar Questions

• Unable to connect to the internet ERROR 678

  original title: Please help me because I get ERROR 678 frequently

  I use a broadband connection on my desktop pc with windows XP SP3, as I tried to connect through windows running phone 7 ultimate, but I was unable to connect to the internet, now even once, I plugged the cable broadband for desktop pc and now I get ERROR 678 , after several attempts to recall that I am able to connect through desktop pc. I have met it 2nd time to do the same procedure for the first time he resolved automatically, but now there's a problem. also contacted the service provider as their laptop to connect to internet with my account but I can't my pc... HELP ME PLEASE...

  Hi Aniketpawar,

  ·         What security software is installed on your computer?

  I suggest you to follow the steps in the Microsoft Knowledge Base article and check.

  You may receive error 678 or error 769 when you try to connect to the Internet or when you try to browse the Internet after you install Windows XP Service Pack 2

   http://support.Microsoft.com/kb/892889

  Let us know if that helps.

• Unable to connect to the Internet, error 8004840 has

  Hi, I have a vista premium edition service pack 2 32-bit windows operating system family, and I can't connect to the internet, plus I get these codes error 8004840a, or 80072ee7 and some times code different, I tried everything but nothing works, any ideas.
  OT:error code 8004840 a
  Thank you
  Francis

  Hi Francis,.

  1. What is the accurate and complete error message you get when you try to connect to the Internet?
  2. you are trying to connect wired or wireless?
  3. don't you make changes to the computer before the show?

  I suggest you try the steps from the following link:

  Wireless and wired network problems
  http://Windows.Microsoft.com/is-is/Windows/network-connection-problem-help#network-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

• Unable to connect to the internet, error: default gateway is unavailable.

  Original title: help

  whenever I use my computer at some point I will get a message that I'm no longer connected to the internet, windows diagnostics will do its thing and fix it, but it keeps well back, he says my default gateway is unavailable. Thank you amber

  Hi amber,

  Let us work together to solve this problem.

  Please answer these questions:

  1. what is the accurate and complete error message that you receive?

  2 what is the make and model of the computer?

  3 you have any third-party antivirus installed on the computer?

  If please try these methods and let us know the results:

  Method 1: Reset WINSOCK TCP/IP IPv4 and IPv6 TCP/IP stack.

  Follow these steps to know how to do:

  a. press Windows + R keys on the desktop, to open the dialog box run.

  b. type cmd and press ENTER to open the command prompt.

  c. type these commands and press ENTER after each line:

  netsh winsock reset catalog which resets the WINSOCK entries to
  default values of the installation.
  netsh int ipv4 reset reset.log that resets the TCP/IP IPv4
  battery installation by default.
  netsh int ipv6 reset Reset reset.log IPv6
  Stack TCP/IP to default installation.

  d. restart the computer.

  Please visit the following link:

  How to reset the Protocol Internet (TCP/IP)
  http://support.Microsoft.com/kb/299357?WA=wsignin1.0

  Method 2: Disable temporarily an antivirus installed on the computer and see if the problem is resolved.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Please get back to us with the results and any other questions you may have about the Windows operating systems. We are happy to help you.

• Unable to connect to the internet error unidentified network

  I have an acer w/Windows 7 and when I turn on the computer, it does not connect to the internet, it says unidentified network and does not connect. What are the options at this point? Modem provided by my cable company a Motorola 6580.  Now, if I unplug the modem and click on diagnose connection, it will connect not ultimately.  This however is ridiculous because I did not have to do when the computer is difficult in the modem cable.

  OT:Motorola 6580 - when I turn on the computer does not connect to internet

  All tips will help!

  Hello

  You did changes to the computer before the show?

  Method 1: update the network driver.

  Steps to update of network driver:

  a. click the Start button.
  (b) in the search box type devmgmt.msc and then press ENTER.
  c. Select the network card device and right click on it
  d. now, select Properties.
  e. in the Properties window, on the driver tab, click Update driver.
  f. after the installation of the updates, restart the computer.

  For more information visit: http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly

  Method 2: Try resetting the TCP/IP stack.

  To reset the stack TCP/IP go to this article and either click on "Fix it for me" or follow the instructions to fix it yourself:http://support.microsoft.com/kb/299357 .

  If the same problem still persists, then try the next method.

  Method 3: Here, you need the problems using the network troubleshooter in Windows 7 and check for the issue to this follow the link provided below.

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  See also: Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• After trying to connect to the internet error message knows unidentified network

  Original title: problem connecting (unidentified network) environment.

  A few times my labtop is big when it connects with the Ethernet cable say: unidentified network
  But when I connect it to an another labtop its connect to the Internet.
  I don't know what case, please help.
  Kind regards.

  Hello

  Did you change on your computer before the show?

  Follow the steps mentioned below:

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  It could be useful!

• Unable to connect to the Internet error "Windows does not detect a network card installed properly"

  Internet does not connect and connection was well 5 hours ago. Message states: "Windows did not detect a network card installed properly" How should I proceed? Connection is on the laptop, but also other devices. Problem is only with the office.

  Any help is appreciated

  OT: Internet connection

  Hello

  You did changes to the computer before the show?

  I suggest you try the steps from the following link:

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• Unable to connect to the Internet, error: this computer does not have a network adapter installed and configured

  Original title: basic computer.

  I have a Dell with windows vista. He has been in place and slow so I reinstalled the program. Now I can't access the internet. I get an error message that says that this computer has a network card installed and configured. I have a linskeys wireless router and we have two laptops that work very well. Don't know what else to do.

  Hello

  Go to the Dell website and download the drivers for your model computer.

  http://www.Dell.com/support/drivers/us/en/19/DriversHome/NeedProductSelection?FKEY=Drivers_PS

  Use one of your other machines > download and save the drivers, network adapter, etc > copy of Flash Drive > transfer and install them.

  See you soon.

• Unable to connect to the internet, error 0x6c371351

  Original title: error 0x6c371351

  I upgraded a sys. IE 6 to ie7, IE worked OK then I updated to xp service pack 2 to sp 3 all look ok. then collapsed conn. to the internet. By checking the conn. I found that it would send packete but not recive them. After closing ie, I get an error 0x6c371351.

  I tried to reinstall ie7 without help, I have not upgraded to ie8, no help, I even deleted IE of the sys, then he only readded no help.

  Can't get sys do sfc, try the sys did a restart. tried a restore of the system of no upgrades before any help.

  Can I use a family xp with not the student to do a repair of the operating system to the delete anything.

  Hi PC more,.

  Follow the steps in the article.

  http://support.Microsoft.com/kb/813444

  http://support.Microsoft.com/kb/314066

  Reference: http://support.microsoft.com/kb/942440

• Unable to connect on the internet on another computer - "Windows could not find a certificate to connect to the network (named).

  When I try to connect to internet on my other computer I get a message saying "Windows could not find a certificate to connect to the network (name)". It's only since I've had a second computer as it does on my old computer which is

  a laptop HP Pressario with Windows XP Home Edition. Someone told me to go to authentication in wireless networks, but can highlight something here as everything is gray.

  Hello

  · What type of encryption do you use on the router?

  · You have the latest drivers for your wireless network card?

  Make sure the authentication IEEE 802. 1 x wireless card is disabled, and check if that helps.

  a. Click Start, then select run.

  b. term ncpa.cpl type dialog box and then click OK.

  c. right click on wireless network connection icon and select Properties.

  d. click the wireless network tab.

  e. click on the properties button next to remove it.

  f. click on the Authentication tab, and then clear the authentication 802. 1 x IEEE select this network check box.

  g. click OK to update the settings.

• Unable to connect to the 2Wire645 error message

  My cable/internet was turn off for 30 minutes... When she came back on my wireless connection was lost and I was not able of to re-connect... What is the problem...

  Try a system restore to a Date before the problem began:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  See you soon.

  Mick Murphy - Microsoft partner

• disorder of the print error message PDF document does not print selected pages

  When printing PDF receive error cannot print document No only selected pages

  Hi alans25325228,

  Try the following: open Adobe Acrobat/Reader navigate to edit-> Preferences menu

  • under Documents, change "Show the documents in PDF/A mode" Never
  • under the (enhanced) protection, clear protected at Startup Mode

  Click OK to confirm the changes.

  Restart Acrobat/Reader, now, try to print the PDF file.

  I would like to know if it works.

  Kind regards

  Meenakshi.

• Error message: "Build signature does not match environment.

  Hello
  
  I had a problem when you try to access the same data to two different computers through the library of BerkeleyDB. I stored data in berkeley db to Machine_A. Then I copy the data to another machine Machine_B. When I try to open it again. It by the following error message:
  --------------------------------------------------------------------
  Create signature does not correspond to environment
  error in creating environment varialbe document 1
  --------------------------------------------------------------------
  The error message is raised by this code:
  Database db = env.openDatabase (null, null, dbName, dbConfig);
  
  
  The data are stored in native java code of Berkeley DB. In both machines, I used Berkeley DB 4.7.25.The berkeley db libraries are compiled independently on both machines. Machine_A is "Machine_A Linux 2.6.26 - 1-amd64 #1 SMP Sat Nov 8 18:25:23 UTC 2008 x86_64 GNU/Linux. Machine_B is "Linux MachineB 2.6.22 - 2-686 #1 SMP killed Aug 31 00:24:01 UTC 2007 i686 GNU/Linux",
  
  I guess the problem is because as the data itself contains version information. But it's ironic for me. The library is dependent on the computer because it is written in C, but the data must be dependent. Am I missing something?
  
  Thank you
  
  Marie-Claude

  Hello. Berkeley DB depends on having structures of uniform size for the life of the community, because these structures must be written and reading environment files. For this reason, each environment contains a signature of the size of the structure, and this stored signature is compared to a signature freshly calculated in open environment. My first guess as to why you see this error is that type sizes on Machine A (x86_64) don't match those of the Machine B (i686). To share files of the environment between 32 and 64-bit platforms, you will need to make sure that the library on the 64-bit platform uses 32-bit types sizes (4 bytes for example pointers, instead of 8-byte pointers.)

  Ben Schmeckpeper

• After a virus, I am unable to connect to the internet. Event log messages: the NetBios over TCP/IP service failed to start due to the following error...

  original title: NETBios TCPIP of missing in Device Manager

  I recently had to run two antivirus programs on an infected computer and am now unable to connect to the internet. When I went to the event viewer, I noticed the following error messages:

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7000

  Date: 16/01/2012

  Time: 12:31:17

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The NetBios over TCP/IP service failed to start due to the following error:

  The service cannot be started, either because it is disabled or because it has no enabled devices is associated to him.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 16/01/2012

  Time: 12:31:17

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The DHCP Client service depends on the NetBios over TCP/IP service which failed to start because of the following error:

  The service cannot be started, either because it is disabled or because it has no enabled devices is associated to him.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 16/01/2012

  Time: 13:32:01

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The DHCP Client service depends on the NetBios over TCP/IP service which failed to start because of the following error:

  A device attached to the system does not work.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 16/01/2012

  Time: 13:32:01

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The helpdesk TCP/IP NetBIOS depends on the NetBios over TCP/IP service which failed to start because of the following error:

  A device attached to the system does not work.

  When I look in the Drivers folder, I see netbt, but devices & Non Plug and Play Devices, of TCPIP NETBios is not listed in Manager.

  Hi Diddy Dell,

  Follow these methods.

  Method 1: Performs a search using the Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not persist in SafeMode with network, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: Follow the steps in the article.

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• Unable to connect to the Internet, receive error message: DEBUGER END WIRE.

  Original title: unable to connect to the Internet

  Hello

  I am using Dell inspiron 1525 with Win.Vista Home Premium 32 bit

  When I connect to internet I displays message DEBUGER CANCEL THREAD

  There is no driver problem

  Someone help me

  I thank & regard

  Satish Baker

  Hi Sissi,

   

  1. you are using a wired or wireless?

  2. do you and changes to the network card or manually change all the settings?

  3 when was the last time it worked?

  4. are you tring to set up internet connection in windows vista for the first time?

  Please follow the links below to solve the problem.

   

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

   

  See also this: the problems of Internet connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

   

  I hope this helps!