After update - black of Windows Vista at startup display 1142/1142 (Registry\Machine\COMPONENTS)
I had an update before closing my office last night (that is, using Vista). This morning when I turned on the computer, a black screen came with the appearance of the following text:
1142/1142 (Registry\Machine\COMPONENTS)
I couldn't do anything so, I turned off my computer. Now, the power will not come. If anyone has any suggestions (could power suddenly gone bad or the power suddenly button failed - just a coincidence, it happened at that moment?).
A big thank you to all those who wish to enlighten me on this matter.
Note: This Office was purchased in 2008 - Acer Aspire AM5620-E5523A (I'll never buy Acer again once!)
Hello
It seems to be a problem with the hardware. I suggest you to contact Acer support for assistance.
Support from Acer: http://support.acer.com/us/en/default.aspx
Hope the information is useful.
Tags: Windows
Similar Questions
-
I have a Toshiba Satellite. Running Windows Vista Home premium 32 bit.
It was working fine until I tried to intsal Service Pack 1 through Windows install after having been invited by windows that he criticized the update.Now windows won't start. I tried the Safe mode, but it stop at the "Loaded: \windows\system32\drivers\crcdisk.sys ' telling me to wait, but it does nothing.
I tried to start another option but they all end in error. Oxc01a001d! 28497/89893 (Registry\Machine\COMPONENTS\DerivedData...) »
Someone please HELP!
I was able to fix the problem by reinstalling windows using the Installation DVD of Vista. He did a "fresh" Reinstall. To do this you first have to set the BIOS to boot from the CD drive instead of the hard drive.
Instructions to do so can be found here: http://techpaul.wordpress.com/2007/08/03/how-to-boot-from-a-cd/Insert your Vista DVD and choose repair or install. My Vista files have been basically corrupt but not your strength. If they are not to select Repair will give you the opportunity to do a system restore.
Don't forget to reinstall Vista to wipe your hard drive and you will lose your files. System Restore will not. But if you supported rose them to an external drive or online so no problem!
I hope this helps!
-
I get the error code 80073712 - windows component store is damaged - when you try to install windows vista SP1 and also the Cumulative security update to explore 7 (KB978207). Fails every time.
I followed the advice and installed the system update tool for Windows Vista (does this twice), but still cannot download and install updates - get error 80073712.
How can I fix the corrupted windows components store?
Thank you
Dan
CMDC,
If the SFC was not able to repair files then the best thing to do is to reinstall Windows. You can try running a disk error check, if it fixes all of the problems, and then rerun the SFC and then install and run the System Update tool. If there is still a problem with the SFC nto be able to complete then you should do a reinstall.Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
Update security for Windows Vista (KB2753842)
11 to install important updates have been received with checked to install. After agreeing to install. another, update security for Windows Vista (KB2753842) doesn't have the box checked. Why he treated differently. It is not appropriate? Should I install?
Hi Genereiss,
Thanks for posting your question in the Microsoft community.
I understand that all updates have been selected and installed very well while a KB2753842 update has not been verified, and that's why you were not able to install it.
The KB2753842 update is designed for Windows Vista and is a required update. Check out the link and read the article for more information.
MS12-078: Description of the update of security for the driver Windows OpenType Compact Font Format (CFF): December 11, 2012
http://support.Microsoft.com/kb/2753842
I suggest that you download the standalone package for this update and install it. Check out the link to download the update file.
Update security for Windows Vista (KB2753842)
http://www.Microsoft.com/en-US/Download/details.aspx?ID=35938
Let us know if you need more information.
-
Problem installation of update KB2556532 on Windows Vista 32 bit - stops configuration stage 3 of 3
original title; Problem installation of update KB2556532 on Windows Vista 32 bit
I had problems for the last two months trying to install the update to windows KB2556532. I have Windows Vista 32 bit.
I had a virus that has been cleaned of my laptop. It was windows recovery of fraud, and I don't know if this could have caused the problem at first, but after you have cleaned the virus always impossible to install this update.
She always says that it has installed ok, but then when the computer has restarted, it is located in 'Configuring Updates step 3 of 3..' he said then that the update was not installed correctly and is back from changes. Once the computer has booted I am prompted to install the update again. It continues in this loop.
Can anyone help me please with this. I can't online solutions for this problem, I looked for a few weeks to try and fix myself.
Unfortunately if this utility installs not it is not that there is something corrupt or prevent Windows to install correctly.
At this point you can try to contact Microsoft through these channels: https://support.microsoft.com/oas/default.aspx?gprid=11732&st=1 to see if they can provide assistance.
-
just always fails and keeps coming back as an essential update, how to exit the loop
Hi Flybywire,
· You receive an error message?
· How you try to install the update for Windows Vista (KB975560) security?
Do the following to display the Windows updates history for the error code.
a. click Start, type Update in the Start search box.
b. in the list of results, click Windows Update.
(c) in the left pane, click view update history.
Follow the steps below to solve the problem:
Method 1: Download the update manually from the Download Center and check if you are able to install it.
Update security for Windows Vista (KB975560)
Method 2: I you suggest to perform the clean boot and then try to install it.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
Hope this information helps.
-
Computer will not start after the installation of Windows Vista SP2
After downloding and installing Windows Vista SP2 on ACER laptop for my daughter, I can no longer start the computer. Initially registered startup C:\\Windows\System32\drivers\ecache.sys as corrupt file repair. Change BIOS to boot first from the optical drive and the departure of computer with Vista DVD in the drive, I accepted the option repair. No chance that the machine always fails to start and always displays the window "Statup repair." Auto repair is always unsuccessful. Repair suggestions will be appreciated. Thank you. Bob G.Support Microsoft still offers a FREE support for Vista SP2. Go to: https://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034&st=1&wfxredirect=1 where they will help you.
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Two copies of windows vista to startup.
I have two copies of windows vista to startup. How can I remove one of the copies?
- Close all running programs and open the windows if you are back on the desktop.
- Click on the Start () button.
- In the search box of the Start Menu () type msconfig and press enter on your keyboard.
- The System Configuration utility opens
- Click the Startup tab.
- You will now be on the screen start as shown below options.
Click on the Vista boot entry you don't want > delete it.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
To solve your problem correctly, reinstall Vista using a custom Setup to remove whatever you already have installed versions of Vista:
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu
http://support.Microsoft.com/default.aspx/KB/918884
MS advice on the conduct of clean install.
http://www.theeldergeekvista.com/vista_clean_installation.htm
A tutorial on the use of a clean install
http://www.winsupersite.com/showcase/winvista_install_03.asp
Super Guide Windows Vista Installation
After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.
Save all data, because it will be lost during a clean installation.
See you soon.
Mick Murphy - Microsoft partner
-
Update security for Windows Vista (KB979683)
Update security for Windows Vista (KB979683)
I get "error (s) found: Code FFFFFFFF.
Help, please!
Hello
My friend has the same issue, you can try
1 - run TDSSKIller
http://support.Kaspersky.com/viruses/solutions?QID=208280684
2. If this does not work, try to reset windows Update components
http://support.Microsoft.com/kb/971058
Finally
3 try to run SFC/scannow
http://www.updatexp.com/scannow-SFC.html
keep us informed
-
Update failed for Windows Vista failed KB975517
I get the same message update failed
Hello
In Control Panel - Windows Updates - right click top and HIDE.
Then download and install it here:
Update security for Windows Vista (KB975517)
http://www.Microsoft.com/downloads/details.aspx?FamilyId=29842c0c-8930-4B5F-83c6-1a718974b63f&displaylang=enThen run this:
How to reset the Windows Update components? -a Mr Fixit
http://support.Microsoft.com/kb/971058Description of the system for Windows Vista, Windows Server 2008, update tool and
for Windows 7
http://support.Microsoft.com/kb/947821----------------------------------------------
If necessary you can incident free get reports however the above should take care of it for you.
Windows updates - free Incident report
Go here and click on-> Windows Update fails while searching, downloading or installation of updates
http://support.Microsoft.com/GP/wusupport#tab3The security updates, you can get free support Incident report
http://www.Microsoft.com/protect/resources/support.aspxI hope this helps.
Rob - bicycle - Mark Twain said it is good. -
Since 01/12/2012 updating security for Windows Vista for x 64-based systems (KB2556532), maintains the resettlement on my system through Windows Update.
Whenever it says updated successfully, then update windows says that it is impossible to get updates. Said update was last updated 12/01/12.
Evry time I reboot, this updated, re - installed.Hello
I suggest you to follow the steps below and check if it helps:
Method 1: Try to reset components to update Windows from the following link.
http://support.Microsoft.com/kb/971058
Method 2: If the problem persists, then try the steps from the link below.
Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update
http://support.Microsoft.com/kb/910339
Hope this information is useful.
-
Abdoulaye recently I received 3 important updates for my windows vista Home premium (my knees is dell inspiron), but there is not installation giving error code (643). Even I tried to do one by one, but do not install it
Hi HazemRagab,
Failed to verify who has had updates to install. Follow these steps:
Start, all programs, windows update, view the update history
Follow the steps in the article.
http://support.Microsoft.com/kb/976982
Reference: http://support.microsoft.com/kb/2545723
-
I have update for Windows Vista (KB2505189), platform update Supplement for Windows Vista (KB2117917) - french and Cumulative security update for ActiveX Killbits for Windows Vista (KB2508272). These updates get the 8007371B error code. I have Windows Vista 32-bit. I searched the Microsoft catalog available and tried a manual installation for these updates, but they have always failed. I have not yet tried to install it in safe mode. Is there anything else I can do to fix this?
8007371B ERROR_SXS_TRANSACTION_CLOSURE_INCOMPLETE
One or more required members of the transaction are not present.Only the specific return code can be solved by running system, aka CheckSUR update readiness tool -.
CheckSUR for taken over all the versions of basic x 86 (32 bit) Windows Vista
When you are prompted to save CheckSUR, choose to not run it.
When the download is complete, close all open programs and browsers.If the installed antivirus is Firewall Norton/McAfee party or a 3rd is used, then suggest you first boot system configuration before you run it.
NOTE: In the clean boot state will be disabled all firewalls of part 3. Ensure that the native Vista firewall is now enabled - enable Windows Firewall on or off
Now run CheckSUR (. Windows6 0-KB947821-v12-x 86.msu).
Restart the system for the same configuration of boot clean and do a check for updates in Windows Update in Control Panel.
If the system can search, detect, download, and install updates now, save an update of a subsequent test.If the system can or cannot now, cancel the clean boot configuration and restart in normal Windows mode.
See if the registered update installs now.If the system still cannot install the updates, please copy and paste the contents of one of the newspapers that CheckSUR created when he ran. They are located in and are named
Windows\Logs\CBS\CheckSUR.log
Windows\Logs\CBS\CheckSUR.persist.logIf the system can install the updates in the clean boot configuration, but not in normal mode of Windows, then there are 3rd party software which is the origin of the update installation problem.
-
Dell Vostro 5470 not get Dell Logo after update bios in Windows 10
Dell Vostro 5470 not get Dell Logo after update bios in Windows 10.
Laptop computer has restarted:
1 Fireed power led,
2 Powered hard drive for 2 seconds to turn it off.
3. stops...
No Dell Logo, no beeps, can't go in the Bios.
Test LCD works OK.
Remove the module of Ram, power on and listen to beep
Pressing the END key and power for laptop has no effect.
Any idea?
Yes. I did it.
Laptop have bios Phoenix.
Phoenix Bios have restored the USB Flash procedure.
This procedure to restore the BIOS:
1. download USB flash less than 4 GB.
2 format in FAT.
3. get your flash update of the Dell store - xxxx.exe
4. run cmd.exe and in the command prompt, run /writehdrfile xxxx.exe
5 extracted copy of Bios.cap for the flash player.
6. turn off the power to the laptop.
Next 7,8 step may not be necessary but I did it.
7 disconnected all perihpericals with battery and charger.
8 disconnect the HARD drive
9. connect the USB on the laptop on the right side.
10 press and hold the END
11, Pluged the power cable and the relase the END key 1 second after the power cord is in.
12 USB led on stick flashed quickly and we see the process of recovery of the Bios on the screen.
13. After finishing laptop restarts and worked well.
-
after update, creative cloud window empty
after update, creative cloud window empty
Hi natzoo1964,
Please follow the steps:
Windows:
Name/AppData/Local/Adobe/OOBE/opm.db C/users/user and delete it.
Mac:
~/Library/Application Support/Adobe/OOBE/opm.db and trash. (http://helpx.adobe.com/x-productkb/global/access-hidden-user-library-files.html)
Launch desktop CC and try to connect.
Kind regards
Romit Sinha
Maybe you are looking for
-
How do you create a PIN in safari?
On my MacBook, I want to create a PIN for one of my frequently used Web sites. How should I do?
-
Why my missed calls will not appear on the screen?
Missed my calls are normally present, but now he appears no more. I already checked to see if the setting has been activated to show the lock screen and it is, but I'm still not able to see my missed calls
-
What Watts value using the Satellite A100-771?
Hello I have a Satellite A100-771. Does anyone know how many watts the TI needs?In my car, I have a 200 Watt 12 volt DC to inverter, but his does not.Is it possible that the laptop needs more than 200 watts? Thanks for your help!
-
BIOS not supported on portable computers
Hello I have a Tecra A11 model PTSE0C - 07H 001 and a Tecra R850 model PT524C - 00H 003. I downloaded the updates to the BIOS for both and ensured that I chose the correct model in the selection dialog of device driver on the driver download page. My
-
I created a base with 6 columns Sharepoint list. Now my boss wants to drop-down menus for quick selections in 2-3 of the columns. How can I add drop-down menus. This list has not been created in an excel spreadsheet. I'm not a programmer, but an