Laptop will not load after installation of SP1. "!! Oxc01a001d! 28497/89893 (\Registry\Machine\COMPONENTS\DerivedData...) "is displayed after the start!

Similar Questions

• HP F023WM: My HP laptop will not load after, log.

  My HP laptop will not load after login

  Lights well, once I connect it just shows a black screen with cursor.

  Help, please

  Hello

  Try the following.

  Boot the computer normally and log.

  Black screen, hold down the ctrl and alt keys and press delete.

  Select Task Manager.

  Click on file and select the new task.

  Type rstrui - also enter a tick in the box for "create this task with administrative privileges" - and click on Ok.

  When the system restore interface is loaded, choose a restore point at least 48 hours before the log - it occurs first and then proceed to the system restore.

  If the above is not correct the problem, try to run the steps in the link below.

  http://h30434.www3.HP.com/T5/notebook-display-and-video/fix-black-screen-displays-after-logging-in-t...

  Kind regards

  DP - K

• Windows 8 will not load after the recent updates. Flashing black screen...

  Last night (14/02/2013), I installed a set of 11 updates (one option, else important) and after restarting my machine after startup logo, the screen of my computer just started flashing from black to grey (when it is grey, I could see my cursor, could move it, but could not do anything else)... He did this for almost an hour until I finally got to load the system restore my Windows 8 Pro x 64 purchased disc.

  Not only has this happened to my desktop pc (a HP Pavilion p6620f), but also exactly the same thing happened on my wife's cell phone when I have updated with the same updates later last night. His laptop computer to a laptop HP Pavilion g7-1310us. of course, I had to again do a restore of the system on lappy.
  *********************************************************
  The updates I had downloaded for both computers on 14/02/2013 are as follows:
  Important:
  (1) cumulative Security Update for Internet Explorer 10 for Windows 8 for x 64 systems (KB2792100)
  (2) security Update for Internet Explorer 10 for Windows 8 for x 64 systems (KB2797052)
  (3) security Update for Microsoft .NET Framework 3.5 on Windows 8 and Windows Server 2012 for x 64 systems (KB2789650)
  (4) security Update for Microsoft .NET Framework 4.5 on Windows 8 and Windows Server 2012 for x 64 systems (KB2789649)
  (5) security Update for Windows 8 for x 64 systems (KB2778344)
  Update security 6) for Windows 8 for x 64 systems (KB2790655)
  (7) security Update for Windows 8 for x 64 systems (KB2799494)
  (8) update for Internet Explorer for Flash for Windows for x 64 systems 8 player (KB2805940)
  (9) update for Windows 8 for x 64 systems (KB2795944)
  (10) Windows removal tool malware for Windows 8 and Windows Server 2012 x 64-based Systems - February 2013 (KB890830)
  Optional:
  (11) update for Windows 8 for x 64 systems (KB2793210)
  *********************************************************
  I would really like someone to be able to help me with this. I bought Windows 8 Pro to my laptop from my wife and also 3 other copies for my father-brother machines... and now, I had to disable the Windows updates for each of them because of this!
  All our computers are HP, maybe that has something to do with it? I do not know. Or maybe it had something to do with the fact that machines did not originally come with pre-installed Win8 (as I said above, I bought the discs retail - 5 of them).
  I really enjoy using Windows 8 and won't go down to Win7 after all my work and spent $$$.
  PLEASE ANSWER THIS QUESTION AS SOON AS POSSIBLE!

  Update:

  With the help of my friend and colleague some at CreativX.net, Greg (gsw953), which has tested this situation on a machine of his, we think we have found what was causing the problem:
  All my machines are patched (I used UltraUXThemePatcher to patch mine) to run custom themes, 3 rd-party... Of course, the patcher (all of them, not just the one I use) modifies several system files (for example the shell32.dll file and a few others), what makes your system able to run themes not digitally signed by Microsoft. This seems to be the rub.
  The way I solved this Aalders - UN-patch my system. Most patchers have an uninstall feature that uninstalls the patcher and adds by default, system files not patches in your system from backups that patch is when you have it installed. Once I did, I got all the updates, restarted, then re-patched my system and everything was fine.
  I have the feeling that this same routine can must be made (UN-patch, get updates, re-patch) whenever MS publishes major updates of Win8... It is prudent to disable automatic updates. Better to have Windows Update notifies you and lets you decide if-or-not to install... and also it's a good idea to READ THE DESCRIPTIONS OF THE UPDATES to see what they are - maybe even search them individually on the ' Net before you allow it to install.
  MS has a long history of updates that fub a system patched... it's as if they don't want look us cool themes. they want that we have all the same, default * that they provide only. Shame on them.
  Once again, in the end, the fix: Nations United-PATCH your sytem... get updates... and then re-PATCH. Worked for me. Touch wood...

• Laptop will not power after the installation of the update vista on 28/04/2015

  On April 28, 2015, I installed vista was last updated and checked "Shut down after installation" now I am unable to power my laptop.  Laptop is still connected to the power supply which is OK.

  Hello

  See if that helps you.

  Do a Safe Mode system restore to before the problem started.

  http://bertk.MVPs.org/html/restoresysv.html

  How to access Safe Mode

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If it doesn't, try a startup repair and / or a system restore using a DVD of Vista from Microsoft

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or working knowledge of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  See you soon.

• Sidebar will not load after the latest round of security updates.

  After re-booting the empty sidebar is displayed, but that's all that happens.  The circle if you go over it.
  I don't see all the other positions in this issue. Owner/Chief Engineer, the top of the Hill of music

  Thank you, t-4-2.

  I really don't want to perform a system restore, if I can avoid it.
  I tried method 2 (manual registration) and he's still just sitting there.

  It resembled measures no registration and re-registration, I found on another site.

  I'm surprised, I'm the only one that has this problem as it seems suspicious that he followed the latest security updates.

  Steven owner/Chief Engineer, the top of the Hill of music

  Steven,
  Is there by any chance you are wrong system restore of the system recovery?
  You thought of the last when I suggested the system restore. Yes?
  This is what I meant:
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  System Restore is our first line of attack when we have problems. We did as the breakfast.

  t-4-2

• Extremely slow start, IE will not load after 4 minutes

  Original title: extremely slow start, IE will not load after 4 minutes

  I have a disaster like now, I am unable to discover HIM, Fox, Chrome & need help as where to go for advice, thank you

  PFM

  Hello

  Thanks for the quick response.

  Have you checked the State of the issue in safe mode?

  You can start the computer in safe mode with network and check the status of the issue.

  Start your computer in safe mode.

  http://Windows.Microsoft.com/en-us/Windows/Start-computer-safe-mode#start-computer-safe-mode=Windows-7

  Please update the status of the issue, it will help us to help you more.

• iPad will not restart after the update iOS9.3. Should force us the reboot?

  iPad will not restart after the update iOS9.3. Should force us the reboot?

  By restart do you average will not turn on?

  There seems to be a bit of a problem past, especially with older models of iPad 2. Some people have reported success after that restore their device via iTunes, for others that it has not worked and all they get is a message "bring it in an apple store.

  Since it affects a lot of people, I think it's safe to say that the problem lies in the range of Apple. But I don't think it is recognized or no matter what put forward fix.

  You can try to restore your device, or you may just be stuck waiting to see if a fix comes out.

  http://support.Apple.com/kb/HT1414

• Photosmart C4280: Photosmart Essential 3.5 will not work after the Win 10 update

  The Photosmart Essential suite, which includes the scanning software will not work after the upgrade to Windows 10.   There is no message error that pop up or are listed in the event log.  Printing continues to function properly.    If the s/w is not compatible with Win 10 there the other scanning software free that I can use?

  Hello

  Thank you for using the forum.  Think that you are facing the same problems as others with Win 10 updates.

  Try this solution:

  http://h30434.www3.HP.com/T5/inkjet-printing/HP-Solution-Center-fails-to-launch-cannot-open-solution-here/m-p/5424438/highlight/true#M515792

   

  Hope that helps.

  Please click on "Bravo Thumbs up" as an encouragement and "Accept as solution" if it helped to solve your problem.

• "0xc01a001d (\Registry\Machine\COMPONENTS\DerivedData...). Error while installing Vista SP1, WITH RESTORATION or BACKUP ACCESS FORBIDDEN! ANY CHANCE OF HEALING?

  I rebooted several times Vista since Vista SP1 download.  I tried to get my system prepared for a Boot (as several vital Programs are not yet supported) double Win7.  I keep getting stuck on the "0xc01a001d? / 99216 (\Registry\Machine\COMPONENTS\DerivedData... "error.

  I have saved on an external USB hard disk and do not have the original system disks.

  I downloaded the Vista recovery disk.  On all options, he said that I could not restore.  He could not read the USB key to find the backup point.  He would not even install when I tried to reinstall.

  Y at - it a help to me.  I am a student and can get another copy of Vista from MSDNAA but would go instead by the download time intensive task, to find drivers on the Dell Web site (I have an Inspiron 1501) and reloading everything.

  ALL BOARDS

  Backup of personal data (which none should be considered 100% reliable at this point) then do a format and clean install of Vista.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or a network otherwise and before using a USB key that is not brand new, or has not been freshly formatted:

  5 steps to help protect your new computer before going online
  http://www.Microsoft.com/protect/computer/advanced/XPPC.mspx

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• BlackBerry BB Z10 Z10 can not load after the 10.3.1 update

  Hello

  I'm having problem with my phone that can not load after that (updated with 10.3.1). battery When I charge the phone, the LED turns red, and then appears the Blackberry logo and finally the Red battery logo appears telling me that the phone has no power. He keeps repeated several times.

  How to start up the phone?

  Please help me. Thank you.

  I suggest you try the method of automatic loader, very clean and very energetic:

  • http://supportforums.BlackBerry.com/T5/BlackBerry-10-OS-device-software/upgrading-OS10-devices-using...

  Beware that it is completely destructive... the device will be 'as new'... None given, no apps, no accounts, etc. Remember you first take a full backup, as well as make full manual documentation of applications, accounts, configurations, etc. Sometimes a restore reintroduced corruption even sought to eliminate, and manual reconfiguration is required.

  You can also use it to return to a BONE earlier if you want... you can install any level of the operating system for which you can find an auto-loader. (Hint... search the site of CB!)

  Good luck and let us know!

• First Pro CC will not appear after startup start

  So I got problems with Premiere Pro CS6 wouldn't show after the start screen was finished loading, so I decided that I wanted to move to Premiere Pro CC and try out the course.

  I uninstalled Premiere Pro CS6 and run the cleanup tool and downloaded creative cloud and started to install the first Pro CC. Now when I click on it in CC, nothing happens, and if I start from its location it will work only the splash screen, but after that he finished to load "ExporterAVI.prm", it will close the splash starts and disappear. If I open the Task Manager, I can see first Pro CC running, but there is nothing on the taskbar. Since Media encode CC is installed with it I tried to run that too. He instead of 'Finish' the splash will stop responding to 'ExporterAVI.prm '. My main suspect is ExporterAVI.prm, but I've been able to find anything about the codecs. I reinstalled the K-Lite Codec Pack (Mega) and always the same questions. I can't find any "ExporterAVI.prm" on my computer, no and I don't know if its supposed to be there.

  I'm out of ideas... I tried Googling everything and no solution so far...

  HOT - FIX, NO SOLUTION:

  Okay, so I finished by contact Support Adobe technique and after a few hours trying to move the error and what we have tried to remove the pluging ExporterAVI.PRM Premiere Pro and Media Encoder. Both programs will now run - however I have not tested a .avi file export and I suspect that it cannot be properly. It is a solution for me because I export all the video files in AVI format in any case.

  I've had trouble finding exporterAVI.prm by conducting a search on my computer and the records but Anand (partisan) found.

  My exporterAVI.rpm file was found in:
  C:\Program Files\Adobe\Adobe Premiere Pro 2015\Plug-ins\Common CC
  C:\Program Files\Adobe\Adobe Media encode CC 2015\Plug-ins\Common

  Thanks for the help and suggestions of everyone and thanks to Anand for his patience and several hours of help through my day.

• First Pro CS5.5.2 will not install after the replacement of the motherboard?

  First Pro CS5.5.2 will not install after replacing mothboard. It was running properly for 4 weeks before changing due to problems connecting AC and wireless connectivity.

  Adobe, case No. 183519673, Adobe engineers (Asia/Pacific) have worked on this issue for more than 3 hours with no result after uninstalling and reinstalling.

  Ideas for resolving the issue wou; LD appreciated.

  Also available at the section of material http://forums.adobe.com/message/4634472

  There is a new forum for download & install and installation issues

  http://forums.Adobe.com/community/download_install_setup

  Or, call Adobe

  In the United States - Adobe install problems 800-642-3623

  In the United States - Adobe Activation 866-772-3623 Open 24/7

  I offered to provide information of make and model of motherboard

  [Additional information about else added]

• Flash animations will not play after the flash update

  Hello

  It's really weird, but flash animations on most sites (sites like Ustream) will not play after that I updated the flash player. The funny thing is that on youtube play very well. I've tried disabling the addon of shockwave, relocation, etc., but nothing works. This problem is with firefox only because as the Chrome and Explorer the flash player works fine.

  Thank you.

  Thank you. In fact, it was not necessary because I have disabled protected mode flash and who did it. However, seems like it is not the best option but average tiem, I guess I have no choice.

  Thank you.

• Laptop will not load web pages for a few minutes after sleep

  HP M6-1045dx, Windows HP 64, SP1

  After waking from sleep, my computer does not load web pages for a few minutes after waking up from his sleep.

  I've tried to follow several times:

  Disabled/enabled wireless adapter

  Wireless adapter uninstalled/reinstalled software both links to HP and Intel.

  Did a clean install of the operating system.

  I sit within eight feet from my wireless router.  Another laptop connects instantly to sleep with no isses.

  Thank you.

  Download and install the latest Intel Wireless driver

  Intel Wireless Driver version 15.2.0.19

  I checked your BIOS driver. It is already updated to F.25. I would like to know what are the results with the new wireless driver.

• Windows XP will not load after installation.

  problem with running windows xp for the first time

  I installed windows XP Professional sp2. it installed correctly, but for the first time that he executed, after the windows logo is displayed, it shows a blue screen (not a blue screen, a screen with the blue color) with windows a side logo of it, and the pointer of the mouse shows waiting. and after a long time, nothing changes.
  After that, a victory run with the safe mode, for the first time, it runs properly, but for the second time when I wanted to run SafeMode again, restart the computer, and so on for the other times.
  I think perhaps it has hardware problem.
  Thank you

  Hello

  Step 1: Use the option disable automatic restart of the system failure. If you receive an error message and then, after return the exact error message.

  Here's how:

  a. restart your computer and start pressing F8 on your keyboard. On a computer that is configured to start to multiple operating systems, you can press the F8 key when the Boot Menu appears.

  b. Select turn off automatic system failure reboot option when the Windows Advanced Options menu appears, and press ENTER.

  Step 2: Try reinstalling Windows XP.