After update ios9.2 will not send my videos by email

Similar Questions

• After updating, my Safari will not open.

  I have a mac mini end of 2012. 10.10.5

  It was fine this morning, then I updated and now my Safari will not open. I'm using Google Chrome now. What could be happening and how to fix it?

  Thank you.

  Try installing the combo update

  Download update of OS X Yosemite 10.10.5 Combo

• Satellite Pro A300 (PSAG9E) - after updating BIOS Windows will not start

  Restart went well after update BIOS and Windows XP logo appears loads for a few seconds then a beep and restart - last good known or start Windows normally same effect.
  Reboot back to start - this is a new laptop - using the BIOS of Toshiba s official download site.

  Quite annoyed to try to find a way to upgrade or downgrade the BIOS.
  Took battery and RAM to see if I can delete it?

  Any ideas anyone?

  I think you mean BIOS * update * and do not upgrade ;)
  An upgrade is not possible

  However, you can try to remove the battery and the AC adapter and wait an hour. After that, reconnect the battery and the AC adapter and try to start Windows.
  Moreover I would load the default settings in the BIOS before starting Windows.

  If it doesn't work, it seems that your ROM module needs to be reflashed. In this case an ASP can help you.

• Satellite A80-135 PSA80: after updating Bios keyboard will not

  SATELLITE A80 - 135 MS (MS is for Spanish)?
  model PSA80E-04C00JSP
  SER 55XXXXXXK

  Windows xp sp3 Spanish

  -> Update of the riginal 1.5_ bios (bios ID EAT10 / EAT20 bios version: v1.50)
  for _v 2.8_

  Downloaded bios - 20070709170816.zip of the Spain of toshiba
  http://es.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp?service=es

  Unzipped the file and found an excutable "windows installation" and "AT10280a.rom".
  Double-click on the installer and...

  .... Now the keyboard is used for nothing (strange signs instead of letters)

  During the update (windows xp) I think I saw something on a master (original rom backup) in c:/windows/temp
  but now I can't find the backup rom.

  Can anyone help?
  Would it be possible to 'downgrade' to the bios (1.5) original and if so... where can I find it?

  Thank you

  Hello

  I don t know why it happened after updating the BIOS, but I guess that the language of the keyboard settings are not correct.

  Go to Control Panel-> Regional Options & language-> language (second tab)-> Details

  Here, you must choose the right keyboard (Spanish) language?

  Good bye

• After updating, stacked widget will not stop AutoPlay

  Hello-

  On the home page of a Web site I've created, I used a composition widget to scroll recommended youtube videos. It is designed for automatic playback, sliding from the video to the video when you arrive on the page (stacked option selected), then stop AutoPlay when a thumbnail is selected.

  Now that I updated day/upgrade, AutoPlay will not stop!  Once you select a thumbnail, the AutoPlay just starts again. It is a problem because I need the user to watch the youtube video in the "slide" that they have chosen.

  Any way around this? or can it be resolved?

  Thank you

  -Cord

  We broke him in the 2.0 update. 2.1 should go live next week. It includes a fix for this. Until then, I'm sorry but I'm not aware of a workaround.

• contact form will not send any form to email designated

  I used this mailform simple php before and it worked fine.

  Work and send me appropriate Mercia page that links to the form itself, but the form by email never makes it to the designated address in the mailto the php file.

  I would really appreciate help someone.

  the php script is as follows:

  < ! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" > ""

  " < html xmlns =" http://www.w3.org/1999/xhtml ">

  < head >

  < meta http-equiv = "Content-Type" content = text/html"; Charset = UTF-8 "/ >"

  < META HTTP-EQUIV = "refresh" content = "0; URL = thankyou.html">

  EmailForm < title > < / title >

  < / head >

  < body >

  <? PHP

  $name = addslashes($_POST['name']);

  $email = addslashes($_POST['email']);

  $comments = addslashes($_POST['dimensions']);

  $comments = addslashes($_POST['wood-sample-number']);

  $comments = addslashes($_POST['address']);

  $comments = addslashes($_POST['message']);

  $continue = "thankyou.html";

  You can specify which email you want your contact form to be emailed here

  $toemail = " " [email protected] "; "

  $subject = "of timsframes.com."

  $headers = "from: timsframes.com". "\r\n". "

  ' Reply-To: [email protected] '. "\r\n" .

  "X-Mailer: PHP /'. '. phpversion();

  $body = "name:". " $name. » \n »

  ." E-mail: '. '. $email. » \n »

  ." "Message:

  . $comments;

  If (! ereg ("^ [a-zA-Z0-9_] + @[a-zA-Z0 - 9-] + \.")) [a-zA-Z0 - 9-------.] + $"(, $email))"

  {

  echo "is not a valid email address.  "Please return to the.

  . "previous page and try again. ';

  "exit";

  }

  mail ($toemail, $subject, $body, $headers);

  echo "thank you for sending your message."

  ? >

  < / body >

  < / html >

  The site is http://www.timframes.com

  The accessible contact form from the navigation bar most every page at this stage

  Is the email address, it is sent to: [email protected] which is hosted on the same server as the site itself.

  Thanks for any help that you could provide!

  FM

  @Faith: you are welcome!

  Here's a simple Anatomy how it works:

  You have an HTML form that collects user input and you assign a "name" to each of the input fields - fname lname, email, phone, etc...

  And you set up the form for 'post' that data to a code of "php".

  So when your PHP code is running, he's trying to 'get' data that submits the HTML form - and it gets these data in input names / ID that has your form HTML:

  $name = addslashes($_POST['name']);

  $email = addslashes($_POST['email']);

  $comments = addslashes($_POST['dimensions']);

  You define a variable for each of the question for example: $name picks up 'name' data in your HTML form and so on.

  Then you say your PHP script to use the mail() function to send data to a predefined address.

  That's the key. There are a lot more, you can do with your PHP code - for example, the format of the data in a 'table' and then email it to you. Or, once the form is sent, send an email to you and the person who used your contact form.

  On a sidenote, there is a nice PHP class, that you can use to manage e-mail. It supports SMTP authentication as well (if your server does not support or disable the php mail function). You can get it here: http://sourceforge.net/projects/phpmailer/

  Happy learning!

• Windows Mail will not send items in outbox__new email is Email removed for protection of personal information

  When I try to send mail, in what remains pending the Outbox

  How to remove an Undeletable Message stuck in Windows Mail
  http://www.Vistax64.com/tutorials/62560-Windows-Mail-problems.html

  WMUtil
  http://www.oehelp.com/WMUtil/default.aspx

  Bruce Hagen ~ MS - MVP [Mail]

• problem updating SP3 after a reboot at the end of the update process, IE8 will not start

  I have no problem updated from sp2 to sp3. However after a reboot at the end of the update process, IE8 will not hold. When I click on ie, computer absolutely crashes. Help, please

  Restart your computer and if restart is ok are not trying to run IE8. Go to add and remove and remove IE8 and your computer will be re-established on IE7.  If all is ok so far restart your computer once more and if everything is ok at this point you can download IE8 again.

• SMS messages will not send watch with active iMessage

  So for three months, I had a problem where my Apple Watch will not send a SMS (iPhone users messages) messages when iMessage is enabled on my iPhone 6.

  Has anyone else encountered this problem? I had my watch replaced by Apple and still encountered the problem. My only work around is to disable iMessage in settings, but I'm not happy with this.

  I have paired and unpaired my Apple Watch repeatedly. I have even associated with a 6s iPhone and did NOT have this problem. Anyone else have any suggestions?

  Hello

  Check that you have enabled the following parameter:

  -On your iPhone, go to: settings > Messages > turn on send as SMS (if it is already on, it may help to toggle this setting and the iMessage off and on again).

  Otherwise, you will find that it is useful to upgrade your iPhone and Apple Watch to the latest version of the software:

  - Update the iOS on your iPhone, iPad or iPod touch - Apple Support software

  - Update the software on your Apple Watch - Apple Support

• This update that kb2729450 will not be installed on my machine.

  This update that kb2729450 will not be installed on my machine. I am running Windows XP SP3. .NET framework 1.1 of .NET Framework 2.0 SP2 .NET Framework 3.0 SP2 and .NET Framework 3.5 SP1 are also responsible... Why the many versions?

  The yellow security shield appears in the status bar. I click on the shield and the Update window opens. I select the "quick installation" and the installation of the update begins. After a few minutes, the message 'Done '. Here's where she spreads all other "Updates" I ran this machine. In the "Done" window, there is only an option button "close"... No button "restart the computer". I click on the "Close" button, the window collapses and the yellow shield disappears... for about 5 minutes, when he reappears! I check the 'Add Remove Programs' in Control Panel, and I don't see that kb2729450 listed. I've "installed" 5 - 6 times, always with the same result. I was struck with this ransomware FBI 4-5 months ago and it was professionally removed. Since I was very nervous when this machine burps.  Also, since the Microsoft Community page, I ran Kaspersky anti-rootkit.  He has reported no problems with this machine

  Nope, different from the machine, although I think I solved it.  I "restored" to a point three weeks ago.  After that 'Restore' finished, I have rebooted and within minutes the yellow shield pops up... I installed every 5 or 6 that this KB.  After installation, he went through his screen to normal closing with the radio button 'restart now '.  After the reboot, I checked the area add / remove in the control panel and Voila.  They and KB2729450 are all here.  The machine seems to work very well and also faster than its ever been.

• I try to run windows update and it will not update gives error code 80070005

  I try to run windows update and it will not update gives error code 80070005, I also ran fix and it tells me that it is fixed but it is not getting the same error code when I try to update after running it help please?

  Hello

   
   
  
  1. which Microsoft Fixit did you?

  2 have you installed new hardware or software before the show?

  3. who is the antivirus installed on the computer program?

  4 update you are trying to install?

  5. are you logged on as administrator on the computer?

  
  If this isn't the case, I suggest you to log on as an administrator and check for the issue.
   
  Method 1:
  One of the other reason for the 80070005 error is caused by software running on your computer security.
  Temporarily disable the security software on the computer and see if that makes a difference.
  Disable the anti-virus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Method 2:
  I suggest you perform the steps described in the article:
  Error: 0x80070005 when you try to install updates by using Microsoft Update or Windows Update
  http://support.Microsoft.com/kb/968003
  This problem may occur if access is denied when accessing or copying files during the process of Windows Update or Microsoft Update. Access may be denied if you have logged on to the computer as a standard user and this account does not have permission to install updates. I suggest you to follow the steps and check if it helps.
  
  Method 3:
  Perform a clean boot, and then check if it helps.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  
  See also:
   
   
  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
   
   
   
  I hope this helps.

• mail, and imap problem Vista - Windows account IMAP AOL will not send or receive any

  I have the same problem as Marie-Claude.  Windows Messaging will check two email accounts, but the aol imap account will not send or receive, and it is my primary email address.  I have a security zone of windows asking for my username and password which will return an 800cccd91 error (I think) and the message that they are not valid.  The user name and password work fine by going directly on aol.com.  I turned off my avg antivirus mail and makes them require a secure password is not checked in the properties of the account.   I first noticed this problem yesterday after I had changed suppliers for remote access, but with aol imap is the only thing affected. My virus programs and spyware are up-to-date. I've seen several references to this same problem and the only other thing that I've seen mentioned that I did not is to remove and reinstall this account. If I do this, it removes all my emails stored under this account in windows mail?  What this has to do to my other computers running xp and outlook?  Other solutions?  Thank you

  Delete and recreate an e-mail account in Windows Mail lost all the data. You would only on the affected computer. Be sure to restart Windows Mail after deleting the account and before recreating the account.

   

  If no improvement:

  Your AVG antivirus has probably been installed with its default installation option that installs an email scanner. Just disable his e-mail analysis

  is not a sufficient remedy. Uninstall AVG and then reinstall, but select 'custom' install, which then allows you to deselect install his embarrassing email

  scanning module. Better yet, replace it with the free Microsoft security program:

  http://www.Microsoft.com/security_essentials

   

  Gary van, Microsoft MVP (Mail)

  "haves" wrote in the new message: * e-mail address is removed from the privacy... *

  I have the same problem as Marie-Claude.  Windows Messaging will check two email accounts, but the aol imap account will not send or receive, and it is my primary email address.  I have a security zone of windows asking for my username and password which will return an 800cccd91 error (I think) and the message that they are not valid.  The user name and password work fine by going directly on aol.com.  I turned off my avg antivirus mail and makes them require a secure password is not checked in the properties of the account.   I first noticed this problem yesterday after I had changed suppliers for remote access, but with aol imap is the only thing affected. My virus programs and spyware are up-to-date. I've seen several references to this same problem and the only other thing that I've seen mentioned that I did not is to remove and reinstall this account. If I do this, it removes all my emails stored under this account in windows mail?  What this has to do to my other computers running xp and outlook?  Other solutions?  Thank you

  Gary van, MVP (Mail)

• Hi, lost all my favorites... won't let me sign in the habit/recognize the password... will not send confirmation e-mail. WTF... Please help fast.

  Hi, lost all my favorites... won't let me sign in the habit/recognize the password... will not send confirmation e-mail. WTF...

  Please help, I just changed to Chrome and it's my first experience...

  Do you know why your bookmarks have disappeared?

  What the rest of the profile?

  Look at your desktop. You see a folder called; Old Firefox?

  https://support.Mozilla.org/en-us/KB/recovering-important-data-from-an-old-profile

  https://support.Mozilla.org/en-us/KB/back-and-restore-information-Firefox-profiles

  Start Firefox in Safe Mode {web link} by holding down the < shift >
  (Mac options) key and then from Firefox. Is always the problem?

• I have 80 email addresses and when I try to send to all 1 will not send

  I have to send to a group of people in an email that I sent a file for each of them to be. Now when I send to this group he will not send one and I have to separately add to include him. I removed his contact and he readded with no luck. Any ideas?

  Most email providers impose a limit on the number of recipients when sending a message.

  What is the limit imposed by your email provider?
  Who do you use?

  example:
  Gmail has a limit of 100
  I heard that BT have a limit of 49 for emails grouped, but difficult to extract this information from them.

  I heard Virgin Media impose a 250 emails per day limit regardless of whether send you 250 as group mails or 250 separate mails.

• My phone will not send SMS.

  I awake tonight and found that my iPhone6s + no will not send SMS to anyone. iMessages work very well. I have to be able to roll over the phone. I have hard to restart the phone. iMessages are very good. Other iPhones in the house (older) send fine. Any ideas?

  Jon

  Hello. Here try the troubleshooting steps: If you cannot send or receive messages on your iPhone, iPad or iPod touch - Apple Support