After update my iPad iOS 9.3 Pro
After the update my iPad iOS 9.3 Pro everytime I turn on my iPad I have to pair the pencil of Apple, is anyone else having this problem and have a fix or work around.
Thanks for any help
I think that it is a normal behavior with Bluetooth devices.
If you are, in fact, transform your iPad completely off the power, then, again, you will lose the Bluetooth connection whenever you do this and you need to reconnect/re-pair any Bluetooth device.
I don't think it's a bug or glitch with iOS 9.3.
I thnk this is normal.
Why don't you just leave your iPad Pro and let him sleep?
It maintains active and connected Bluetooth connection
Whenever you turn on your iPad in and out, you break the link of Bluetooth pairing.
Let your iPad on and let the iPad go to sleep.
Tags: iPad
Similar Questions
-
I downloaded the update to iOS over-the-air 9.3 and installed. Setup cannot connect to the server to activate the ipad2. The message is to try again in a few minutes or connect to iTunes to activate. Yes, I have the most recent and current iTunes version, so this isn't the issue. iTunes recognizes the iPad as my ipad2, but cannot do what he done to be able to use iTunes to activate it. I have 2 iPads. iPad 2 and iPad 4th generation. iPad 4th generation downloaded on-line and updated and active and install without problem. IPad2 updated and not can not connect to the server to activate and I connect to iTunes to activate as the message says, but iTunes cannot activate because it sees my ipad2 and that's all that. Of course, I'll try again once activate WiFi tomorrow but any suggestions would be greatly appreciated.
Thand you
same problem with you jerryenea. This seems to happen ipad 2 only? my itunes cannot check my ipad
-
By updating my IPad IOS 9.3 Air, the following message appears: "unable to verify the update. 9.3 IOS doesn't have a verification because you are no longer connected to the Internet. New attempt remind Me later. " See the image below.
Note that while I am able to get the email, do some research on the Internet, etc., that the update itself seems to be the culprit the disconnection of Internet while performing the check. I closed all applications and even rebooted the IPad and then tried to run the update, but still get the same message. Any other suggestions?
Thank you in advance for your help!
I'm having this problem too.
-
How to activate after update on iPad
How can I activate after update on iPad. I get the error message
Force reboot your iPad.
Press and hold the Home and Sleep/Wake buttons for at least ten seconds, until you see the Apple logo. »
If this does not help, please reply and tell us exactly what the error message said.
-
for day, after update my ipad, I forgot my password to icloud
for day, after update my ipad, I forgot my password to icloud
and I forgot my security question too coz so long ago I'm not use the icloud to update my ipad, and day, the ipad after system update, they want to enter the icloud account and the password, please guys help me...
Recover your Apple ID (same as iCloud > https://iforgot.apple.com/appleid#! & section = appleid )
Help for security here > If you forgot your Apple ID security questions answered
-
Update my iPad iOS 9.2.1 now I can't update my apps
I just updated my iPad iOS 9.2.1 now it will not update my apps
If you want to help, provide details like what happens when you try...
-
After update my Pro iPad with iOS 9.3 iPad crashes on Safari. Example I googled something results appear, but I am not able to enter any page
It seems that it is a result of the update. Other users report it, and I also read that Apple is aware of the problem and working on a fix. Be patient and watch for an update. Some have reported that disabling Java script has worked for them. You need to check yourself.
-
When can I update my iPad iOS 10 mini
I am able to update my iPad mini iOS 10 yet? Any body knows please. When I check on Apple's site it says that I can, but when I try to update says its ios updated showing 9.
If you use an original Mini iPad, iOS 10 is not supported.
-
Can I update my iPad iOS 9.2.1
My iPad which I believe is pre-iPad 2 is in version 8.3 (12F69). What can I / should I accept iOS 9.2.1 update?
See the table below to determine if you can update your device and you can move on. If you do not have a current software update option on your iDevice, then you try to update IOS 5 or above. You need to connect your device to your computer and open iTunes to upgrade.
IPhone, iPod Touch and iPad iOS compatibility table
Device iOS Verson
1 iOS 3.1.3 iPhone
iPhone 3G iOS 4.2.1
iPhone 3GS iOS 6.1.x
iPhone 4 iOS 7.1.x
iPhone 4 iOS 9.x.x
iPhone 5 iOS 9.x.x
9.x.x iOS iPhone 5 c
9.x.x iOS iPhone 5s
9.x.x iOS iPhone 6
iPhone 6 more iOS 9.x.x
-------------------------------------------------------
iPod Touch iOS 3.1.3 1
iPod Touch 2 iOS 4.2.1
iPod Touch 3 iOS 5.1.1
iPod Touch 4 iOS 6.1.x
iPod Touch 5 iOS 9.x.x
-------------------------------------------------------
iPad 1 iOS 5.1.1
iPad 2 iOS 9.x.x
iPad 3 iOS 9.x.x
iPad 4 iOS 9.x.x
iPad Mini & Mini retina iOS 9.x.x
IPad iOS 9.x.x seem
=====================================
Select the most appropriate method for your situation.
Update iOS
1. How to upgrade your iPhone, iPad or iPod Touch
4. iPad Support
a. , update your iOS to iOS 5
Tap Settings > general > software update
If an update is available, there will be an active button to update . If you are currently
Then you will see a gray screen with a message saying that you are up-to-date.
b. If you are still using iOS 4 - updated your iOS device 5 or later.
c. update of the resolution of the problems
-
After updating my iPhone IOS 9.2 5 my Safari no longer works
I recently updated my iPhone IOS version 9.2 5 and I got the white screen of death. After a reset, the white screen was gone, but when I tried to use Safari, I noticed that it had completely stopped working. If I touch the Safari icon, it opens and stops immediately. I can't access same Safari in 'Settings' (I touch the word Safari and settings completely closes.) Can someone help me? I have a lot of favorites that I don't want to lose and since Safari is the browser by default, all links automatically go so I can't open them.
Hello PhotoGirl64,
I understand that you are having problems with Safari crashing on you when you try to access, it forms the app and even from settings. We'll see what we can do to make it work again.
The first thing I would try requires each app to close. Double rooms, press the Home button to display the recently used applications and drag on them. Once they are closed, try opening the application again to test.
Force an app to close the iOS
https://support.Apple.com/en-us/HT201330If this does not work, I would look to reset your iPhone settings. This will not delete the personal data, but it does not all settings to their initial default values. Once this is done, try opening the application again to see if it remains open.
Reset iPhone
http://help.Apple.com/iPhone/9/#/iph7a2a9399bLet me know if it helps
Take care
-
After the update to iOS 9.3 my 2 Mini iPad fails to activate.
I get the message 'wrong apple ID' all the time, even if its my correct apple ID, that works on iTunes and iCloud, etc..
I tried the activation via iTunes recovery mode and DFU mode, but nothing helps. I do not think it's a problem of server activation, this looks more like a problem with activation ID.
I also tried to remove the device from iCloud, remove the device to locate your iPhone and even changed my password Apple ID.
Is this a possible iOS Malware hack "Keyraider"?
It is more likely that it is a bug on the Apple name, given the large number of threads with people having the same problem. Especially people with older devices.
You may only be stuck waiting for them to sort out if restore via iTunes did not work for you.
-
How can I update my iPad iOS to iOS 9.1 7.1.1 3
HI guys,.
can anyone tell how to download iOS 9.1 on my iPad 3 woman + cell LTE, as I have iOS 7.1.1 on my iPad
You can download iOS 9.2.1.
Connect your iPad to your computer, iTunes (make sure you have iTunes 12.3.2) and
Click on the update button control.
-
What can I / should I update my iPad iOS
My iPad which I believe is pre-iPad 2 is in version 8.3 (12F69). What can I / should I accept iOS 9.2.1 update?
Hello
Yes go to settings iCloud - backup now.
Then upgrade to ios 9.2.1 above your WiFi.
See you soon
Brian
-
I updated my ipad ios 9.2.1 and when you use safari, it crashes
I've updated 9.2.1 on my ipad and now my safari crashes when you use the keyboard
Here's my own list of the fixes suggested trying who helped many former users of iPad.
A warning:
I make no warranty, express or implied, that any PART of my patches suggsted or solutions will fix/restore each older iPad on his former status of operation
Try to reset all the settings in the settings under general app and in the right column under restore.
Try stories reset and delete/reset the caches in all web browsers you use.
If you use Safari, these features may be in the application settings under Safari.
Other browsers have their settings inside the running application itself.If your iPad has been activated for iCloud, in the application settings under iCloud, to the right, under iCloud Drive, type in iCloud drive and make sure that Safari is off to save data from Safari to iCloud by car.
Also, under iCloud in the application settings, in iCloud Drive, turn the feature off saving for all other desired apps DO NOT the data automatically on iCloud drive.
For additional questions to Safari, try disabling Safari Suggestions found in the settings app in the control panel settings of Safari. Press Safari and in the right panel, look for the Suggestions of Safari and turn this option off to disable this feature.
If you are using Safari is always causing issues.
Try changing / using web browser third another, different.
I do not use iOS Safari too much more because I found it cause me headaches on some Web sites, regularly, to visit.
I commonly use another third party browser, perfect browser (there are others that can suit your style better web browsing, so look all first to see what third-party browser may work better for you) and I have never experience many questions that Safari was originally.In the application settings tab general, right under the spotlight sesrch, try disable the search under the applications who really don't need a research, as some games, remote controls, apps that are really useless to be searched, etc., in order to reduce the list to Spotlight search
Try to turn the reduced movement.
This is found in the application of settings in the general tab, in the left panel.
In the right panel, look under accessibility, look to reduce the Motion and turn this feature "On".
You should see a significant performance increase on all models of iPad 2, 3 and 4.In the application settings under the general tab, in the right column, search background App update and enable this setting to "off".
Try a hard reset of your iPad by simultaneously pressing buttons Home and sleep/wake button until your iPad goes to the dark and restarts with the Apple logo, then release the buttons.
Good luck!
-
Since updating my i Pad for ios 10, the ability to close or restore applications open with a double-tap the home button, now does only intermittently. Yesterday, it was not working. Today, it was and I was able to close open approximately 20 applications. Now, it does not, once again. I've seen some comments somewhere relative to other people with similar problems.
Hello
Go to settings-general - accessibility to the 'home' enable finger rest for Open button.
Who can help.
See you soon
Brian
Maybe you are looking for
-
Does not my modem (Lucent/Agere?) - (downloaded from the Toshiba site) drivers are installed without problem (no warning in Device Manager), but the modem can not open the (virtual) serial port.I tried all the possible drivers and installation plans.
-
Which Macbook Pro 15 "should I get?
Currently I have a Macbook Pro with the Retina display and it does not cut it 13 ". I need a CD/DVD port and a lot more storage that I have now. Until I sell my current laptop and get a new one, I try to understand that it is my best result. I'm in C
-
Lenovo U310 DRIVER_POWER_STATE_FAILURE BSOD after sleep
Hello! I'm sitting here with my U310 I bought for about 1 year. When I bought Windows 8 has been installed, but through the normal procedures of Windows Update 8.1 for Windows has been installed within a couple of months. Due to the fact that I am a
-
Display in real time with a delayed recording LV6.1
Hi, I need help with LabView 6.1 I have a hardware module FieldPoint where I read 8 channels for thermocouple. I want to display the value of the thermocouples in real time (or as close as I can manage) all saving the values in a CSV file at discrete
-
I recently had to restore my pc to factory default and now used to install service pack 1 for vista. It keeps cycling he finished and then watch again he must run the sp1. I can't switch to win7 if sp1 for vista will not install correctly. What can I