Modem satellite M30 problem

Similar Questions

• Satellite M30: Problems install Power Saver - fatal error has occurred

  7.0.0.3 for something Satellite M30.

  After setting up, I get a "fatal error occurred. The program took end code ox2.

  Any ideas on whats wrong?

  Hello

  I put t know exactly what's wrong, but I remember these problems might appear if the drivers, tools, and utilities are installed in the correct order.
  The installation instructions document is no doubt placed on the page of the Toshiba driver.
  I recommend that you check these documents

  But why you don t use the Toshiba Recovery CD. This CD allows you to install the operating system with all the necessary tools and drivers much faster and easier.

• Cannot install modem SATELLITE M30 604

  I don't see my modem in Device Manager. I can't see a com port in Device Manager.

  When I choose Control Panel > phone and modem options, I don't see modem.
  I chose the Add button. My modem is not detected. Then I have the possibility to install it in a list.
  I chose Have disk.
  I chose the Browse button and
  I select the Tools & Utilities CD-ROM supplied with my laptop (or downloaded files from Toshiba).
  I select the (D:\Modem Driver\NETHERLD) ltsmwxp.inf file on the CD.
  Always SOME models appear in the window of modew new installation.

  How can I install my modem?

  Hello

  I'm sure that you can install driver modem Tools & Utilities CD. If you want to download it on this way.

  Type of portable computer product
  Satellite family
  Satllite M Series product series
  Satellite M30 model
  Windows XP operating system
  Driver Modem driver type.

  Then choose the appropriate driver for your country and try to install it again.

• Vsync satellite M30 problem

  I have the centrino 1.6 with 64 MB fx go5200 15.4 "widescreen m30. You can use the new nvidia drivers like 66,10 but only those modified that you can easily find on the net.

  The main problem is that you cannot change the refresh rate that he is stuck on 60 Hz. For this reason, rates of frame for all games are 60 Hz and very slow, even if you use the refresh rate overrides.
  There must be an option to disable similar to menu opengl vsync. I tried the 3rd party applications such as NVRefreshTool 2. 1A, but it didn't fix the problem.

  Anyone has a solution on this. By the way there is a solution on the net about this black border problem that some have. You must search for it.

  As far as I know that Toshiba display driver are supported as the those of Nvidia are not for laptops!

  Do you have this problem with a Toshiba driver held, too?

  What operating system and Service Pack you are using? For XP SP2 might occure problems with different drivers, so you need to update!

  CAMPino Bye

• Keyboard on my Satellite M30 problem

  Hello

  (Sorry for my English, ja? m Italian: P)

  AI? ve installed Vista on my M30 742 but here? ve a lot of problem with the Shift and CTRL keys. (I can not install some programs, such as the common module).

  Now, when I press on and then release him, it remains only by pressing during several seconds.
  Can someone help me?

  Thank you

  StickyKeys is activated? Check the settings in the control panel-> Accessibility Options

  Otherwise the keyboard may have failed, perhaps caused by a spill of liquid or just a problem with the keyboard.

  He comes back as well? Test and CTRL on the BACK using a MSDOS boot disk, which you can download from www.bootdisk.com

• Strange keyboard on my Satellite M30 problem

  Hello

  I have a problem with the keyboard on my m30. He still thinks that the shift keys are pressed. The only way around this was to disable the two keys in the registry - using an external keyboard.

  External keyboard works perfectly.

  Thinking it was a problem with my keyboard, I replaced the keyboard m30 twice, but still have the same problem, even after a thorough cleaning of my OS.

  Do you think it could be a motherboard problem? It occurred after a year.

  Thank you

  TREV

  Hi trev

  In my opinion just detailed testing can clarify the situation. In my opinion, there is a hardware problem. I think that this keyboard controller is faulty. Maybe I'm wrong, but as far as I know internal and external keyboard don t use the same controller.

  Try to contact the Service partner and ask them what may be the problem. They know what the problem is here.

• Satellite M30 - problem with the graphics driver and Quicktime movies

  I just installed a 40 GB to 80 GB hard drive and installed all the drivers in the correct order, as indicated by toshiba. Everything works well except the used for Quicktime .mov files. All I get is audio but no image - other than a colorful blur screen!

  I think I've isolated the problem to the graphics driver. Whenever I turned off / uninstall the driver dedicated for the graphics card FX 5200 GP (version 4.6.44) Quicktime files work fine. It is only when I installed the dedicated driver problems occur!

  Can someone tell me why this might be?

  Hello

  Do you use the graphics driver from the Toshiba driver page?

  Try to use the QuickTime Alternative 1.77. In this version the codex QuickTime has been updated.
  This version uses these features:

  -Media Player Classic [version 6.4.9.0 + SVN build 2006-12-24]
  -Codecs QuickTime [version 7.1.3.100]
  -QuickTime plugin for Internet Explorer
  -QuickTime plugin for Opera/Mozilla/Netscape
  -Extra plugins for QuickTime
  -QuickTime DirectShow parser
  -Wrapper DirectShow QuickTime decoder
  -CoreAVC 0.0.0.4
  -CoreAAC 1.2.0.575

  check it out...

• Startup satellite M30 problem

  Hello

  When you try to start, the screen displays simply;

  "NTLDR is missing".

  Press Ctrl + Alt + Del

  When I do that I'm just going through a loop.

  I understand that this error message is possiable linked to a drive problem, can you please help?

  Hello

  Please check this topic http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=2832&messageID=8450#8450. If you have a problem, you can check if there is already a discussed on similar problems. Go to advanced search and use of certain search terms.

  Good bye

• Satellite M30: Cannot use COM with the Modem port

  Hello

  I have a satellite m30. I have problems with the com port to use with the modem. I get an error code saying 12 resources etc. There is no i/o or IRQ conflict IRQ 04 and e/s beach is 03F8 - 03FF. I tried to uninstall various things to free resources, but still the same error.

  Any help would be greatly appreciated.

  This problem when you use the Toshiba Recovery CD?
  Try to disconnect all the external devices and install Windows from the Toshiba restore CD.

  Additional please check several comments here in the forum area Modem. I found several threads with similar issues

• Satellite M30-404 BIOS update problem

  Hi ppl
  I have problem with the bios update, my laptop is 1.30 bios ver and ill try updated to 1.60 worm. on windows update becauseI gift? t have traditional update disk. But do not work 4 me. Help, please? Im trying to update to 1.20 ver., reading in the manual of the BIOS, but nothing hapend.
  SRY for bad English :) ppl

  Howdi wiz4rd,

  I also have a satellite M30, and a few weeks ago I had updated my laptop to the BIOS v1.6 latest. I had no problem with the update.

  Where did you downloaded your BIOS? and what Productcode your machine? (PSM30E or other)

  CyA bob77

• Satellite M30: Unknow Hard Error - could this be a problem of hard drive?

  I got my Satellite M30 for 2 years now and it never gave me any problems, until a few weeks ago. The problem started shortly after I put Windows to SP2, when I played a game it would stick for a minute or two, and then continue on as usual, the problem slowly got worse and started blue screening with "Unknown hard error" and sometimes strange balloon in the lower right corner saying unknown hardware error and then freeze it. It also took a long time to start and generally do nothing.

  Assumed it was a problem when I've upgraded to SP2, so I decided to reinstall Windows and start over again, update the BIOS while I was home.

  Once this is done it seemed fine for an hour or two, but then tried to install a game and of course, the good old blue screen appears and the whole problem starts again.

  I took it to a repair shop and explain the problem and I had re-installed Windows nothing helped, and I suspected that it may be a hardware failure, I left it with them, and 2 days later I get a call saying its all fixed and ready to be picked up, I asked what was wrong with it and they said that they re-installed Windows and sound now works fine (i.e. what I their) I said, I had made and n t worked!). I picked up (and got charged £40 to have done what I had already done). I got it home and everything seemed ok... for a few hours, then blue screens seemed to tell me any physical dumping of beginning and the usual stuff.

  I think it might be a drive problem hard, like when I tried to install a game on it at night last light CD and HARD flash drive, one for about 15 seconds, then the other for a short time, data copied from one to the other, but then the HARD drive light stayed on, and I could hear the HARD disk as if it were sticky , after about a minute of this blue and close short-listed and took some time to turn back. If I leave a couple of hours and it starts fine until the next time.

  So, after my long description on my problem, I have 2 questions,

  1. could I be right in thinking that these problems are associated with hard drive?
  2. If I'm right, is easy to replace on the M30 HARD drive and where I would buy a new?

  Thanks for your time and help,

  Kenny.

  Hello

  The blue screen appears only if you play games?

  But I agree with you. In my opinion, there would really be a hardware malfunction.
  The question is - it s a HARD drive or something different?
  Hmmm. I think that the problem is not related to the disc HARD but maybe overheating?
  According to the publication, sometimes when you play games. The game is a high performance application. All devices running with maximum performance and produce heat.

  I m not 100% sure, but maybe the high temperature has a bad influence on the system and therefore the BSOD happens.
  You suggested that the laptop run properly for about 2 years. Maybe fans can cool properly because of the dust and debris. Two years is a long time if you have not cleaned the cooling modules and fans.

• Ports COM1-4 'missing' Satellite M30

  Hello, communication ports (COM1-4) series of my sound of portable Satellite M30 suddenly "disappeared", or, at least, Window XP (Home version) is unable to detect them - through the management of resources or similar tools of surveillance - only parallel port (LPT1) is reported.
  Problem is that the modem (internal standard) (by default on COM3) is unable to work. Modem seems ok - at least according to Windows - but, as you can guess, it cannot accept AT command (and therefore start up).
  Everything else seems to work fine - including the Infrared Port, which should work, by default, on COM4? and mouse Touchpad. No problem i/o and IRQ address is detected on the other peripherls.
  Only the system serial port driver (serial.sys) is alarmed that unable to boot because.
  ..??? .. Even thought a hardware problem - ex.electrostatic discharge or similar? - but a couple of days ago the modem starts unexpectedly and worked correctly for long enough - even if with the COM ports still without being detected by Windows - but after connection went down and modem could not start (Error 633: modem, a device already in service or other problems of configuration...).
  .. Before proceeding to more annoying (and probably expensive) actions - such as reinstalling Windows?... or looking for a repair center - I wanted to try to replace the driver (serial.sys) series, but I was unable to find it-in the CD provided with the product or on the Toshiba site. Where can I find it?
  Other suggestions?
  Thank you

  Hello

  Don t look for serial port drivers. These ports are using simply common Microsoft Windows drivers!
  According to your description there are different problems with different internal devices.

  If all goes well it of not a hardware problem?  :|

  So in my opinion we must first know if it s a software or hardware problem.
  In this case you take your original Toshiba Recovery CD and must be reinstalled the operating system.

  Note; the whole HARD disc will be fomrated and you will lose data. So, don t forget to back up your data.

  If the new installation of the operating system didn't help any, and you will always receive error messages the technician must check the laptop!

  Good luck

• Can not find the drivers for Satellite M30 842

  Hello

  I'm a repair technician, and I'm repairing a European model Satellite with Windows corrupted; I reformatted and I install Windows with my generic Windows XP Home CD. I have had no luck finding the drivers for (as listed in the Device Manager):

  -Network controller (wireless, wired ethernet works)
  -Controller Audio multimedia
  -Modem PCI
  -Unknown device

  Windows Update has been able to find the video and the USB drivers, but I can't find information on this model on the Toshiba support sites.

  Thanks in advance,
  Tim Allix
  Whistler, British Colombia. Canada.

  I put t know where is the problem?
  Satellite M30-842 contains the number PSM30E.
  Visit the page of the Toshiba driver and select just this laptop

  You also, you should find on the same page Check installation instructions and follow the guide of the lines in the text file

• How do Toshiba's energy-saving work on Satellite M30?

  I recently had to reinstall XP on my Satellite M30 PSM33A

  I have most of the pilots but were not able to get Toshiba saver work, nor the keys FN, the drivers I downloaded installed on-site, but saying "cannot open as you do not have access rights.

  It's frustrating because my screen is really low.
  In addition, my CD player but works I can not read the DVD - it says I have an incompatible driver and I tried everything

  Can anyone help? See you soon

  PSM33A must be Australian model laptop so please download all the drivers, tools and utilities http://www.isd.toshiba.com.au/71/live.dll/topic/content/driver_search.jsp?MODE=NPRO&CATOID=-15058

  You will find all the things you need. I don't know what the problem is here, but please install all the stuff following this order of installations:

  1 chipset Driver
  2 Microsoft Updates
  3 display driver
  4. Common Modules
  5 Hotkey for display devices
  6. the utility change device screen
  7 sound Driver
  8 touch pad Driver
  9 YPP/power button Utility
  10 driver modem
  11 V.92 Modem Driver
  12. wireless network driver
  13 Atheros Client Utility
  14. the network driver
  15 infrared driver
  16 ConfigFree
  17. SD host controller driver
  18. SD memory card driver
  19. SD memory card format
  20. power management
  21 utilities
  22. the buttons
  23. the console
  24 DVD player
  25. drag / drop
  26 CD/DVD Drive Acoustic Silencer
  27 skins for Windows Media Player
  28 user manual
  29 Screensaver
  30 wallpapers
  31. Sun Java Runtime Environment

  I hope this will help you to install all drivers and Toshiba tools and utilities correctly.

• High temperature CPU on Satellite M30

  Hello

  I have a Satellite M30 852 with Pentium M 1.5 GHz processor. My problem is that the heater does not start until the CPU temperature reached 70 degrees, which I think is a bit high, no mention that when it has reached this temperature I can not keep the laptop on my legs because it burns... and also to kind of warm around the touchpad and left side of the keyboard.

  My question is if there is any software I can use to take the cooler start at low temperatures, to keep, or if there is no setting I can adjust the laptop utilities to solve this problem (in addition to throttle CPU cooling where is defined in the performance).

  Thank you all in advance!

  Could PS: Anyone tell me which button support when starting, to get into the BIOS...? Because the F1, esc or del does not work.

  Post edited by: master of ceremonies

  Hello

  The temperature of 70 ° C nothing unusual and in my opinion not too high.
  Is that it s not recommended to use the laptop on your legs or in bet, etc.
  You should always be sure that there is enough free space (left, right, bottom) around the laptop for the circulation of fresh air!

  Usually, the Toshiba power saver controls the cooling method and the CPU processing speed. If you want to change some settings you should the fact in the basic power saver menu.

  PS: on m30 the phoenix BIOS has been installed and therefore, you should use the F2 key.