after update of Lightroom, to develop pictures in the temperature range

Similar Questions

• After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom. Maybe one of them will help you.

  (1) restart you device.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth). Channels 1, 6 or 11 are recommended for 2.4 band.

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) backup and restore the device using iTunes. Try to restore as New first and test it. If ok try to restore the backup (the backup may be corrupted).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple store for the evaluation of the material. The Wi - Fi chip or the antenna could be faulty.

  Council: https://discussions.apple.com/docs/DOC-9892

• After updating my OS to iPad 2 to the last iOS 9 on March 22, 2016, I get the message below after several attempts to turn on my iPad: "your iPad could not be activated because the activation server is temporaril."

  After updating my OS to iPad 2 to the last iOS 9 on March 22, 2016, I get the message below after several attempts to turn on my iPad:

  "Your iPad could not be activated because the activation server is temporarily unavailable. Try to connect your iPad to iTunes to activate it, or try again in a few minutes. If the problem persists, contact Apple Support at apple.com/support. »

  I am based in Lagos in Nigeria and can't seem to find any Support from Apple for my country on the web. Please urgent help because I can not access my iPad. Thank you.

  How did you get the update? via iTunes or ios

• attachment not available after update of Lightroom and OSX in El Capitan

  I have a NIkon 7100 and tethering worked beautifully until I installed Mac OSX El Capitan and the update of Lightroom. Anyone have this problem or have a fix?

  Hey Adobe-ish,

  You use Lightroom 6?

  Please click on the link for more information about shooting attached below.

  Lightroom and El Capitan | Mac OS 10.11

  ~ UL

• After updating to Firefox 15 it crashes at the end of a javascript call window.close (); opener.alert ('test'); Does work as expected or is this a bug?

  After updating to Firefox 15, it crashes after a popup called javascript window.close (); opener.alert ('test'); Does work as expected or is this a bug?

  It works better if you disable the modal prompt temporarily as a test by setting prompts.tab_modal.enabled false on the subject: config page?

• I can't delete cookies after update from version 9.0.1, also the opening, I have 2 new cookie files that disappear at the close of FF.

  I have uninstalled/reinstalled 9.0.1, is the same thing. Check my profile, cookies.sqlite is if FF is closed or uninstalled. When installed and opened, I have 2 new files, wal - cookies.sqlite and cookies.sqlite - shm, as well as of cookies.sqlite. Is this the reason why I can't delete cookies? Also, I and enabled AdBlock Plus and the navigation of private life. After update, I can't post anything in support of FF (this is my 4th attempt, Safari finally used to post) and files under Tools, as clear history are accessible, I shouldn't have a history to remove.

  (1st edition)
  Ok. I reinstalled FF 9.0.1 Safari, but not directly from Mozilla. I used CNet, now things work as they should. I have no cookies listed, except those I want. Private browsing does not work correctly. However, I still have these 2 additional cookie files; -wal-shm.

  (2nd edition)
  I spoke too soon. After accessing sites that I frequent, the 'ad' cookies are back (adbright, realmedia, 247realmedia) and cookies from the site are eliminated, only not here, spent. Now I can't connect to anything and am back to Safari to access the Support Forum of FF. Have I not a bug? Someone please help, I'm desperate, I hate IE, Safari, Chrome, etc. They have neither the level of ad and pop elimination - up that Firefox has; and they don't have the level of customization that Firefox has. 2 additional cookie - wal-shm files, are always there when FF is open and disappeared again the closure of FF. One last thing, I noticed, I have a request of support for Chrome file in my library. The cookie file Chrome could interfere with the FF cookies? I do not think, I have Safari, as well, and no browser has ever interfaced with each other before.

  (3rd edition)
  I have uninstalled/reinstalled FF, all my modules and also tried to delete the cookies.sqlite document in the FF profile file, nothing happens. I counted, there are 14 sites listed in preferences > privacy > pane show Cookies (no pun intended) and they are all sites of "ad". These sites are also listed as sites blocked in Adblock Plus. Until a person pick up, I give up, I don't know what else to do. He there was that the only time that cookies were gone pane show Cookies, every other time I have uninstalled/reinstalled anything, they were still there. So, until someone can help me, I'm stuck. The only thing I did is removed altogether-profile file. It's the last thing I want to do, unless I can save my favorites somewhere to return after reinstalling. If this is not corrected in the next few days, I can just try, too.

  I think I solved my problem. I activated the safemode, then activated each Add on, one at a time, reboot FF between each activation. I don't have the add-on TACO. I hope this is the end. Thank you for your response. I appreciate it.

  Little puzzle, this particular post was not the first in which I posted this question. However, it is the only one that I thought was actually posted on the forum. The first two attempts, I thought had not displayed. Today, there are all the posts with the same problem. So, I really thank Mozilla for their patience and all the people who have taken the time to read this and the other two positions. I apologize for the repeated messages. I really didn't know that they had been posted because I couldn't find their afterwords to edit with my attempts to fix this problem.

• After Update 9.2, I can't find the setting of music library to iCloud.

  After Update 9.2 that I can't find the setting to turn on iCloud music library, besides I can't position to turn on the Apple music either.

  If I went blind or where these settings removed?  I don't know why they would have been removed but I did look through everything in settings and can not find them. It drives me crazy. It existed before the update. I want to just turn it on so I can access my music to iCloud.

  Does anyone know where the setting is?  Yes, I rebooted several times already.

  What do you see when you go into the app music?

• Y at - it a recent update 6 Lightroom? Can't find the download? Not on CC, use of stand alone. Thank you

  Cannot find a link for the most recent update of Lightroom 6. Someone at - it a link? Not on the CC of stand-alone use.

  Thaks

  Hello

  Yes, the latest version is 6.4 However, Setup is the same for CC2015.4 and 6.4, which can be downloaded here: keeping up-to-date for Lightroom

  Kind regards

  Claes

• Missing photos, folders in Lightroom 6 after importation. Lightroom stores a copy of the photos that have been imported and if so where?

  My nanny/photographer improved his Lightroom to worm. 6. She left the old version 4.4 on as well, so I think she just did a straight installation of v6. It has imported several hundred photos directly from memory cards in Lightroom 6, without copying the files on the computer. She was then abducted and subsequently deleted the pictures from the memory card. These records show now with a question mark in Lightroom, I imagine that it is looking for the files on the memory card. Bright room makes a copy of the files when they are imported or let just a pointer as to where they have been imported from?

  She also found with multiple catalogs. CAT 1 is a little bigger, then Cat 3, but the House of light can not open the file and provides the following error message: "Lightroom cannot use the catalog named"Lightroom Catalog"because it is not writable and cannot be opened."

  If TI LR retains a copy I was hoping they were perhaps in Cat 1, who was the first that was created.

  Thank you

  Chris

  Someone has a misunderstanding about Lightroom and its import process. Importing images into Lightroom does not mean that Lightroom will ingest these images. The import process is one of saying Lightroom where to store the images on the hard drive. Then Lightroom keeps track of these images in this folder location and combines the image settings. If the images were imported in the usual way, they should be located in a folder on the hard disk.

  If you say that the images were just imported while remaining on the map (I thought that Lightroom who wouldn't) then if they have not been copied to the hard drive you will have images. Just previews.

• After update to Photoshop and Illustrator I have the error message

  Hello

  After update manually Photoshop CS5 v.12.0.4 12.0.5 and v.15.0.2 Illustrator CS5 to 15.0.3

  (Because my virus program Kaspersky told me to do for safety reasons)

  The two update went well.

  

  

  But now I have an error message after running the application of updates from Adobe.

  It is as if he does not notice that the two programs have been updated.

  

  What can I do?

  OK thanks you please try reinstalling Adobe Application Manager of http://www.adobe.com/support/downloads/detail.jsp?ftpID=4773.

  If you continue to experience difficulties, then we need to look at the logs for attempts to install the updates.  You can find details on how to locate and interpret the log files to troubleshoot issues with install newspapers | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html.

• an unexpected error after update of Lightroom 6 [was: LR6 update]

  This afternoon I've updated LR6 and it worked for a short period, I disconnected a moment I can't reconnect.  I get a message "unexpected error".

  Suggest you to reinstall Lightroom 6 times.

  Use this link to download: Download Photoshop Lightroom

• Hi, after updating my firefox, I can't open the download icon

  Today firefox updated the browser automatically. Then I download something after download of color of the icon should change to blue, but it is not. Yet gray.

  While I try to click on it, it will not open the download.
  Now, I have to manually open my download folder, instead of opening the browser which is not effective.

  That's happened?

  Sorry for my bad English.

  Thanks & Rgds,
  Chris

  Good, it resolved after I closed and Open firefox.

• aftering updated firefox to version 8.0, that the Navigator will sail is no longer to any Web site. An error window appears with "unable to connect to the server (where you point)!

  Using windows XP pro.

  One possible cause is security software (firewall) that blocks or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox in the list of permissions in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.com/kb/server+not+found
  • https://support.Mozilla.com/kb/firewalls

• After update for HP UPD PCL 5 on the network drivers, local printers now very slow printing

  I've recently updated the HP Universal Print Driver PCL 5 on my Windows 2008 R2 file and print server.  All printers on network HP 5 now show the new driver of the UPD PCL 5, and 5 all seems to work fine from all clients on the attached network.

  However, as soon as I had updated the drivers from server, anyone with a printer connected locally HP began to test response times very slow when trying to print jobs to their local printer or even bring up the properties of the local printer.  I think that it is because local printers also use the HP UPD PCL5 driver, and something "broke" when I updated the driver on the server.   If the local printer is set as default, trying to make it appear a Properties dialog box takes several seconds (before it was instant), and clicking PRINT in any application results in a noticeable delay for the print dialog box to appear, followed by another notable delay (as in 10-20 seconds) before work is treated and control the application returned ot the user.  The printer takes then to another a few seconds to process work.  Essentially print jobs local just went from 5 seconds to 30 seconds or more for each task to start to print more.  This is unacceptable.

  I tried to remove all printers on network among the PC client, and then deleting the local printer as well.  I restarted, then used the install.exe HP UPD PCL 5 to start the installation on the local computer, choosing to do an installation of USB.  I turned on the printer local return and it has been recognized and loaded the new HP UPD PCL5 driver, but the problem persists.

  So after messing around with this more yesterday I think I narrowed down it to a port number.  It seems that when computers with local printers connected downloaded the new UPD PCL 5 form the network (updated their drivers for network printer), he reconfigured the USB port for each printer connected locally.  The USB port on the local printer will now appear as "DOT4 generic IEEE 1284.4 support printing", while before I'm pretty sure he showed as "DOT4 HP Laserjet one."   This white paper (which is unfortunately for Windows XP) appears to support the hypothesis that the port has changed and that the generic port is much slower (this is what we see now with local printers).  White paper on the issue of generic DOT4 port

  I tried to delete all printers that use the UPD from a local system and then using the install.exe form the UPD package to install the local printer as a USB printer (disconnection of the latter before installation and then in reconnecting it when you are prompted by Setup), still the same generic port is re-created.  How can I change the generic port to a specific port HP driver for printers normally respond again?

  Furthermore, I opened a ticket with the help of HP on the issue Monday afternoon, it is now Wednesday morning and the only response I received was a request to make sure that my cables were not more than 6' long.  Seriously HP support?

  My best guess is that you do not use the name of specific driver to the version on the print server.   Driver version-specific name will look like "HP Universal printing PCL6 (v5.9.0).   Non-specific to the version name will look like "HP Universal PCL6 print.

  When you work with print servers, it is recommended to use the name of the version-specifc driver.   I think what happened here are that the driver has been updated on the server, and this update was then pushed to clients through point and print because the pilots names.

  You have indicated that you are using the PCL5 driver.   In a general office print PCL6 offers the best combination of performance and print quality.   I recommend you go to PCL6 immediately, unless your devices or custom applications/solutions are not compatible with PCL6.  (This is very rare)

  If it were my system, here's what I'd do.

  1. Download UPD PCL6 5.9.0 and PARK of www.hp.com/go/upd
  2. Install the UPD PCL6 5.9.0 on my print server using the name specific to the version - create a temporary queue.
  3. Run AutoUpgradeUPD.exe from the PARK to remove queues existing impression on my print server and re-create them with the PCL6 driver.   (See http://youtu.be/mYCVx1RBp9w for more information on this utility)
  4. Remove the temporary queue
  5. On my clients, I would remove the existing printer USB connections.
  6. Run the UPD PCL6 5.9.0 installer and select the USB - Plug and Play mode and make sure that both check boxes are enabled.
  7. Re-connect local printers.

  Something else I could try to implement PRNCON of the PARK on each client.    It will be delete and re-create the connections to printer to the print server.    This can be run without command-line switches, but I like to use the '-2000 w' command to force a second 2 the delay between the removal of the printer connection and recreate.

  In a last time, I'll make sure to remove any old/unused drivers from the print server.

• iMac hangs after update of recent software - "an element of the liberated area has been modified in the area of pipe.

  I have an iMac 21.5 "2009 end which I never had no problem with. It is Yosemite 10.10.5 running and after a recent software update has become very unstable. After I restarted recently he crashed 5 times a day. It seems to be the internet causing the problem (I use Google and Safari and had adbloc on Google).

  This is a copy of the last problem report. Any help would be appreciated.

  Anonymous UUID: 7DBCDA8C-8FD9-63FE-7843-971A36805010

  Mar 22 19:13:35 dec 2015

  Panic report *.

  panic (cpu 0 0xffffff800c76bf7d appellant): "an element of the liberated area has changed in the area of pipe: expected 0xc0ffeeb11389b206 but found 0xc0ffeef11389b206, wicks 0 4000000000 changed x, offset 168 of 176 in the element 0xffffff801a243a70, cookies 0x3f00113109ad8bc6 0x53521947e0c1049"@/SourceCache/xnu/xnu-2782.50.1/osfmk/kern/zalloc.c:496.

  Backtrace (CPU 0), frame: return address

  0xffffff809f79bc70: 0xffffff800c72ad21

  0xffffff809f79bcf0: 0xffffff800c76bf7d

  0xffffff809f79bd60: 0xffffff800c76b9f1

  0xffffff809f79bda0: 0xffffff800c76a837

  0xffffff809f79bed0: 0xffffff800cbefd61

  0xffffff809f79bf50: 0xffffff800cc4b376

  0xffffff809f79bfb0: 0xffffff800c8344a6

  The process corresponding to the current thread BSD name: firmwaresyncd

  Mac OS version:

  14F1509

  Kernel version:

  14.5.0 Darwin kernel version: kills Sep 1 21:23:09 PDT 2015; root:XNU-2782.50.1~1/RELEASE_X86_64

  Kernel UUID: 06D286E3-A8A1-3BE7-A7EB-EAC6E0C69758

  Slide kernel: 0x000000000c400000

  Text of core base: 0xffffff800c600000

  Text __HIB base: 0xffffff800c500000

  Name of system model: iMac10, 1 (Mac-F2268CC8)

  Availability of the system in nanoseconds: 350747261770

  last load kext to 295918008027: com.apple.filesystems.msdosfs 1.10 (addr 0xffffff7f8ef37000 size 69632)

  Finally unloaded kext to 148510260291: com.apple.iokit.IOAHCIPassThrough 1.0.3 (addr 0xffffff7f8e061000 size 36864)

  kexts responsible:

  com.rim.driver.BlackBerryUSBDriverInt 0.0.68

  com Apple.filesystems.msdosfs 1.10

  com.apple.driver.AudioAUUC 1.70

  com.apple.driver.AppleHWSensor 1.9.5d0

  com.apple.driver.AGPM 110.19.6

  com Apple.filesystems.autofs 3.0

  com.apple.iokit.IOBluetoothSerialManager 4.3.6f3

  com.apple.driver.AppleOSXWatchdog 1

  com.apple.driver.AppleMikeyHIDDriver 124

  com.apple.driver.AppleHDA 272.18.3

  com.apple.driver.AppleMikeyDriver 272.18.3

  com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.3.6f3

  com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0

  com.apple.driver.AppleLPC 1.7.3

  com.apple.iokit.IOUserEthernet 1.0.1

  com.apple.Dont_Steal_Mac_OS_X 7.0.0

  com.apple.driver.AppleHWAccess 1

  com.apple.driver.AppleHV 1

  com.apple.driver.AppleIntelSlowAdaptiveClocking 4.0.0

  com.apple.driver.AppleBacklight 170.7.4

  com.apple.GeForceTesla 10.0.0

  com.apple.driver.AppleUpstreamUserClient 3.6.1

  com.apple.driver.AppleMCCSControl 1.2.12

  com.apple.driver.AppleIRController 327,5

  com.apple.driver.AppleUSBCardReader 3.5.5

  com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1

  com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0

  com.apple.BootCache 36

  com.apple.iokit.SCSITaskUserClient 3.7.5

  com.apple.driver.XsanFilter 404

  com.apple.iokit.IOAHCIBlockStorage 2.7.1

  com.apple.driver.AppleFWOHCI 5.5.2

  com.apple.driver.AirPort.Atheros40 700.74.5

  com.apple.driver.AppleUSBHub 705.4.2

  com.apple.driver.AppleHPET 1.8

  com Apple.nvenet 2.0.22

  com.apple.driver.AppleAHCIPort 3.1.2

  com.apple.driver.AppleUSBOHCI 656.4.1

  com.apple.driver.AppleUSBEHCI 705.4.14

  com.apple.driver.AppleRTC 2.0

  com.apple.driver.AppleACPIButtons 3.1

  com.apple.driver.AppleSMBIOS 2.1

  com.apple.driver.AppleACPIEC 3.1

  com.apple.driver.AppleAPIC 1.7

  com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0

  com Apple.NKE.applicationfirewall 161

  com Apple.Security.Quarantine 3

  com.apple.security.TMSafetyNet 8

  com.apple.driver.AppleIntelCPUPowerManagement 218.0.0

  3.10.25 com.apple.AppleGraphicsDeviceControl

  com Apple.kext.Triggers 1.0

  com.apple.iokit.IOSerialFamily 11

  com.apple.driver.DspFuncLib 272.18.3

  com.apple.kext.OSvKernDSPLib 1.15

  com.apple.iokit.IOFireWireIP 2.2.6

  com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.3.6f3

  com.apple.driver.IOPlatformPluginLegacy 1.0.0

  com.apple.driver.AppleSMBusPCI 1.0.12d1

  com.apple.driver.IOPlatformPluginFamily 5.9.1d7

  com.apple.iokit.IOUSBUserClient 705.4.0

  com.apple.driver.AppleHDAController 272.18.3

  com.apple.iokit.IOHDAFamily 272.18.3

  com.apple.iokit.IOAudioFamily 203.3

  com.apple.vecLib.kext 1.2.0

  com.apple.iokit.IOSurface 97.4

  com.apple.iokit.IOBluetoothFamily 4.3.6f3

  com.apple.iokit.IOSlowAdaptiveClockingFamily 1.0.0

  com.apple.driver.AppleBacklightExpert 1.1.0

  com.apple.driver.AppleSMC 3.1.9

  com.apple.nvidia.classic.NVDANV50HalTesla 10.0.0

  com.apple.driver.AppleSMBusController 1.0.13d1

  com.apple.nvidia.classic.NVDAResmanTesla 10.0.0

  com.apple.iokit.IONDRVSupport 2.4.1

  com.apple.iokit.IOGraphicsFamily 2.4.1

  com.apple.driver.AppleUSBHIDKeyboard 176,2

  com.apple.driver.AppleHIDKeyboard 176,2

  com.apple.iokit.IOUSBHIDDriver 705.4.0

  com.apple.driver.AppleUSBMergeNub 705.4.0

  com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.7.5

  com.apple.iokit.IOBDStorageFamily 1.7

  com.apple.iokit.IODVDStorageFamily 1.7.1

  com.apple.iokit.IOCDStorageFamily 1.7.1

  com.apple.iokit.IOAHCISerialATAPI 2.6.1

  4.5.8 com.apple.iokit.IOFireWireFamily

  com.apple.driver.AppleEFINVRAM 2.0

  com.apple.iokit.IO80211Family 730.60

  com.apple.driver.AppleEFIRuntime 2.0

  com.apple.iokit.IONetworkingFamily 3.2

  com.apple.iokit.IOAHCIFamily 2.7.5

  2.2.9 com.apple.driver.NVSMU

  com.apple.iokit.IOHIDFamily 2.0.0

  com.apple.iokit.IOSMBusFamily 1.1

  com Apple.Security.sandbox 300.0

  com.apple.kext.AppleMatch 1.0.0d1

  com.apple.driver.AppleKeyStore 2

  com.apple.driver.AppleMobileFileIntegrity 1.0.5

  com.apple.driver.AppleCredentialManager 1.0

  com.apple.driver.DiskImages 398

  com.apple.iokit.IOReportFamily 31

  com.apple.driver.AppleFDEKeyStore 28.30

  com.apple.iokit.IOUSBMassStorageClass 3.7.2

  com.apple.driver.AppleUSBComposite 705.4.9

  com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.5

  com.apple.iokit.IOStorageFamily 2.0

  com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.5

  com.apple.iokit.IOUSBFamily 720.4.4

  com.apple.driver.AppleACPIPlatform 3.1

  com.apple.iokit.IOPCIFamily 2.9

  com.apple.iokit.IOACPIFamily 1.4

  com.apple.kec.Libm 1

  com Apple.KEC.pthread 1

  com Apple.KEC.corecrypto 1.0

  System profile:

  Airport: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.74.0 - P2P

  Bluetooth: Version 4.3.6f3 16238, 3 services, 27 aircraft, 1 incoming serial ports

  Crush Bus:

  Memory module: BANK 0/DIMM1, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020

  Memory module: BANK 1/DIMM1, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020

  USB device: Keyboard Hub

  USB Device: Apple keyboard

  USB device: ISight built-in

  USB device: Memory card reader internal

  USB Device: IR receiver

  USB device: USB optical mouse

  USB device: Hub BRCM2046

  USB Device: USB Bluetooth host controller

  Serial ATA Device: WDC WD5000AAKS-40V2B0, 500,11 GB

  Serial ATA Device: OPTIARC DVD RW AD - 5680H

  Model: iMac10, 1, IM101.00CC.B00 of BootROM, 2 processors, Intel Core 2 Duo 3.06 GHz, 4 GB, MSC 1.52f9

  Network service: Airport, AirPort, en1

  Graphics card: NVIDIA GeForce 9400, NVIDIA GeForce 9400, PCI, 256 MB

  Model: iMac10, 1, IM101.00CC.B00 of BootROM, 2 processors, Intel Core 2 Duo 3.06 GHz, 4 GB, MSC 1.52f9

  Graphics card: NVIDIA GeForce 9400, NVIDIA GeForce 9400, PCI, 256 MB

  Memory module: BANK 0/DIMM1, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020

  Memory module: BANK 1/DIMM1, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020

  Airport: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.74.0 - P2P

  Bluetooth: Version 4.3.6f3 16238, 3 services, 27 aircraft, 1 incoming serial ports

  Network service: Airport, AirPort, en1

  Serial ATA Device: WDC WD5000AAKS-40V2B0, 500,11 GB

  Serial ATA Device: OPTIARC DVD RW AD - 5680H

  USB device: Keyboard Hub

  USB Device: Apple keyboard

  USB device: ISight built-in

  USB device: Memory card reader internal

  USB Device: IR receiver

  USB device: USB optical mouse

  USB device: Hub BRCM2046

  USB Device: USB Bluetooth host controller

  Crush Bus:

  com.rim.driver.BlackBerryUSBDriverInt 0.0.68

  Try to uninstall RIM.

  Uninstallation of RIM