iMac hangs after update of recent software - "an element of the liberated area has been modified in the area of pipe.

Similar Questions

• After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom. Maybe one of them will help you.

  (1) restart you device.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth). Channels 1, 6 or 11 are recommended for 2.4 band.

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) backup and restore the device using iTunes. Try to restore as New first and test it. If ok try to restore the backup (the backup may be corrupted).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple store for the evaluation of the material. The Wi - Fi chip or the antenna could be faulty.

  Council: https://discussions.apple.com/docs/DOC-9892

• After updating my OS to iPad 2 to the last iOS 9 on March 22, 2016, I get the message below after several attempts to turn on my iPad: "your iPad could not be activated because the activation server is temporaril."

  After updating my OS to iPad 2 to the last iOS 9 on March 22, 2016, I get the message below after several attempts to turn on my iPad:

  "Your iPad could not be activated because the activation server is temporarily unavailable. Try to connect your iPad to iTunes to activate it, or try again in a few minutes. If the problem persists, contact Apple Support at apple.com/support. »

  I am based in Lagos in Nigeria and can't seem to find any Support from Apple for my country on the web. Please urgent help because I can not access my iPad. Thank you.

  How did you get the update? via iTunes or ios

• After I check what software purchased for download, the only option I get is for Spanish, what should I do?

  After I check what software purchased for download, the only option I get is for Spanish, what should I do?

  If you mean Adobe Acrobat XI, and if you went to download Acrobat products | Standard, Pro | DC, XI, X

  and if you saw the link beside "Spanish" Please include link is to all listed languages, not only for the Spanish.

• After that installation of 9.3 iPad will not activate, it has been restored, but still not turn on. The first owner does not know the password

  After that installation of 9.3 iPad will not activate, it has been restored, but still not turn on. The first owner does not know the password

  And this is not recognitze by any device, computer or iPhone 6plus.

  If you or the original owner did not have the password no one here or at Apple can help you.

• Birth of Nations hangs after update to the last version of windows

  the ndvidia update was unsuccessful and now Rise of Nations hangs and the computer restarts.

  Hi BillElliott,
   
  -Do you remember the number of the Knowledge Base (KB) of the update has been installed recently?
  -What happens when you try to update the graphics card? You receive an error message or error code? If Yes, indicate the same.
   
  Follow these steps to display the history of facility for the number of the update has been installed recently.
   
  a. click Start, click all programsand then click Windows Update or Microsoft Update.
  b. on the Windows Update Web site or on the Microsoft Update Web site, click view update history. A window opens that displays the updates that have been installed or that have failed to install on the computer.
   
  Keep me updated on the status of the issue.

• The XP Applications hang after update

  I use a VM XP on a Macbook with Yosemite.  Recently, several updates have been auto-installé under XP when I turned on the Macbook.  Now the XP virtual machine will boot and display the desktop, but no matter what application I run just hangs.

  Any suggestions on how to diagnose the problem?

  Hello

  Oh my bad, register/unregister is the terminology used with the VMware vSphere product

  In merging the same is called 'delete' then you get a popup

  "Delete the virtual machine" with the buttons 'Move to trash', 'Cancel', 'keep the file '.

  
  Choose "keep the file.

  --

  Wil

• System hangs after update to thunderbird.

  Thunderbird did an automatic update. After that, whenever I try to run it, the system reboots.

  A clean installation and a restoration of Mozbackup and a few reboots solved the problem.
  I'll replace the disk as soon as possible.

• Stop: c000021a, Windows XP hangs after updates.

  Original title: windows xp pro crash after update.

  I've updated my windows xp pro the other day and it made my system crash. Here is the error there was message: Stop: c000021a (fatal system error) connection system process finished in unexpected ways with the status of 0xc0000034 (0 x 00000000 000000000 x), the system stopped. I tried everything to get this corrected. can anyone help please. I've tried everything. can I download exp of windows on the computer and if so, how? Thank you.

  Hello

  ·        The updates you have installed prior to this problem?

  ·        Have what measures you tried to solve the problem?

  The STOP 0xC000021A error occurs when Winlogon.exe or Csrss.exe. When the Windows NT kernel detects that or the other of these processes has stopped, it shuts down the system and triggers the STOP 0xC000021A error.

  You can follow this link & check if it helps.

  How to solve an error "STOP 0xC000021A.

  Note:  You can keep the handy Windows XP installation disc.

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• After update for HP UPD PCL 5 on the network drivers, local printers now very slow printing

  I've recently updated the HP Universal Print Driver PCL 5 on my Windows 2008 R2 file and print server.  All printers on network HP 5 now show the new driver of the UPD PCL 5, and 5 all seems to work fine from all clients on the attached network.

  However, as soon as I had updated the drivers from server, anyone with a printer connected locally HP began to test response times very slow when trying to print jobs to their local printer or even bring up the properties of the local printer.  I think that it is because local printers also use the HP UPD PCL5 driver, and something "broke" when I updated the driver on the server.   If the local printer is set as default, trying to make it appear a Properties dialog box takes several seconds (before it was instant), and clicking PRINT in any application results in a noticeable delay for the print dialog box to appear, followed by another notable delay (as in 10-20 seconds) before work is treated and control the application returned ot the user.  The printer takes then to another a few seconds to process work.  Essentially print jobs local just went from 5 seconds to 30 seconds or more for each task to start to print more.  This is unacceptable.

  I tried to remove all printers on network among the PC client, and then deleting the local printer as well.  I restarted, then used the install.exe HP UPD PCL 5 to start the installation on the local computer, choosing to do an installation of USB.  I turned on the printer local return and it has been recognized and loaded the new HP UPD PCL5 driver, but the problem persists.

  So after messing around with this more yesterday I think I narrowed down it to a port number.  It seems that when computers with local printers connected downloaded the new UPD PCL 5 form the network (updated their drivers for network printer), he reconfigured the USB port for each printer connected locally.  The USB port on the local printer will now appear as "DOT4 generic IEEE 1284.4 support printing", while before I'm pretty sure he showed as "DOT4 HP Laserjet one."   This white paper (which is unfortunately for Windows XP) appears to support the hypothesis that the port has changed and that the generic port is much slower (this is what we see now with local printers).  White paper on the issue of generic DOT4 port

  I tried to delete all printers that use the UPD from a local system and then using the install.exe form the UPD package to install the local printer as a USB printer (disconnection of the latter before installation and then in reconnecting it when you are prompted by Setup), still the same generic port is re-created.  How can I change the generic port to a specific port HP driver for printers normally respond again?

  Furthermore, I opened a ticket with the help of HP on the issue Monday afternoon, it is now Wednesday morning and the only response I received was a request to make sure that my cables were not more than 6' long.  Seriously HP support?

  My best guess is that you do not use the name of specific driver to the version on the print server.   Driver version-specific name will look like "HP Universal printing PCL6 (v5.9.0).   Non-specific to the version name will look like "HP Universal PCL6 print.

  When you work with print servers, it is recommended to use the name of the version-specifc driver.   I think what happened here are that the driver has been updated on the server, and this update was then pushed to clients through point and print because the pilots names.

  You have indicated that you are using the PCL5 driver.   In a general office print PCL6 offers the best combination of performance and print quality.   I recommend you go to PCL6 immediately, unless your devices or custom applications/solutions are not compatible with PCL6.  (This is very rare)

  If it were my system, here's what I'd do.

  1. Download UPD PCL6 5.9.0 and PARK of www.hp.com/go/upd
  2. Install the UPD PCL6 5.9.0 on my print server using the name specific to the version - create a temporary queue.
  3. Run AutoUpgradeUPD.exe from the PARK to remove queues existing impression on my print server and re-create them with the PCL6 driver.   (See http://youtu.be/mYCVx1RBp9w for more information on this utility)
  4. Remove the temporary queue
  5. On my clients, I would remove the existing printer USB connections.
  6. Run the UPD PCL6 5.9.0 installer and select the USB - Plug and Play mode and make sure that both check boxes are enabled.
  7. Re-connect local printers.

  Something else I could try to implement PRNCON of the PARK on each client.    It will be delete and re-create the connections to printer to the print server.    This can be run without command-line switches, but I like to use the '-2000 w' command to force a second 2 the delay between the removal of the printer connection and recreate.

  In a last time, I'll make sure to remove any old/unused drivers from the print server.

• every time when I want to update my ios software. It shows the message "unable to verify update.w.

  every time when I want to update my ios software .it shows the message "unable to check the updates.

  Try to update via iTunes.

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  Also, take a look at this thread:

  Unable to control upgrade

  After completing the steps above, try to update your device once more.

• After updating to Firefox 15 it crashes at the end of a javascript call window.close (); opener.alert ('test'); Does work as expected or is this a bug?

  After updating to Firefox 15, it crashes after a popup called javascript window.close (); opener.alert ('test'); Does work as expected or is this a bug?

  It works better if you disable the modal prompt temporarily as a test by setting prompts.tab_modal.enabled false on the subject: config page?

• I can't delete cookies after update from version 9.0.1, also the opening, I have 2 new cookie files that disappear at the close of FF.

  I have uninstalled/reinstalled 9.0.1, is the same thing. Check my profile, cookies.sqlite is if FF is closed or uninstalled. When installed and opened, I have 2 new files, wal - cookies.sqlite and cookies.sqlite - shm, as well as of cookies.sqlite. Is this the reason why I can't delete cookies? Also, I and enabled AdBlock Plus and the navigation of private life. After update, I can't post anything in support of FF (this is my 4th attempt, Safari finally used to post) and files under Tools, as clear history are accessible, I shouldn't have a history to remove.

  (1st edition)
  Ok. I reinstalled FF 9.0.1 Safari, but not directly from Mozilla. I used CNet, now things work as they should. I have no cookies listed, except those I want. Private browsing does not work correctly. However, I still have these 2 additional cookie files; -wal-shm.

  (2nd edition)
  I spoke too soon. After accessing sites that I frequent, the 'ad' cookies are back (adbright, realmedia, 247realmedia) and cookies from the site are eliminated, only not here, spent. Now I can't connect to anything and am back to Safari to access the Support Forum of FF. Have I not a bug? Someone please help, I'm desperate, I hate IE, Safari, Chrome, etc. They have neither the level of ad and pop elimination - up that Firefox has; and they don't have the level of customization that Firefox has. 2 additional cookie - wal-shm files, are always there when FF is open and disappeared again the closure of FF. One last thing, I noticed, I have a request of support for Chrome file in my library. The cookie file Chrome could interfere with the FF cookies? I do not think, I have Safari, as well, and no browser has ever interfaced with each other before.

  (3rd edition)
  I have uninstalled/reinstalled FF, all my modules and also tried to delete the cookies.sqlite document in the FF profile file, nothing happens. I counted, there are 14 sites listed in preferences > privacy > pane show Cookies (no pun intended) and they are all sites of "ad". These sites are also listed as sites blocked in Adblock Plus. Until a person pick up, I give up, I don't know what else to do. He there was that the only time that cookies were gone pane show Cookies, every other time I have uninstalled/reinstalled anything, they were still there. So, until someone can help me, I'm stuck. The only thing I did is removed altogether-profile file. It's the last thing I want to do, unless I can save my favorites somewhere to return after reinstalling. If this is not corrected in the next few days, I can just try, too.

  I think I solved my problem. I activated the safemode, then activated each Add on, one at a time, reboot FF between each activation. I don't have the add-on TACO. I hope this is the end. Thank you for your response. I appreciate it.

  Little puzzle, this particular post was not the first in which I posted this question. However, it is the only one that I thought was actually posted on the forum. The first two attempts, I thought had not displayed. Today, there are all the posts with the same problem. So, I really thank Mozilla for their patience and all the people who have taken the time to read this and the other two positions. I apologize for the repeated messages. I really didn't know that they had been posted because I couldn't find their afterwords to edit with my attempts to fix this problem.

• After Update 9.2, I can't find the setting of music library to iCloud.

  After Update 9.2 that I can't find the setting to turn on iCloud music library, besides I can't position to turn on the Apple music either.

  If I went blind or where these settings removed?  I don't know why they would have been removed but I did look through everything in settings and can not find them. It drives me crazy. It existed before the update. I want to just turn it on so I can access my music to iCloud.

  Does anyone know where the setting is?  Yes, I rebooted several times already.

  What do you see when you go into the app music?

• after update of Lightroom, to develop pictures in the temperature range

  after update of Lightroom, photos to develop are reflected in the temperature range!

  Hello

  • Go to Lightroom > Preferences
  • Also please go to preferences > Performance tab and uncheck the box "use graphics processor.
  • Restart Lightroom and see if it works.

  Concerning

  Tanuj