After update Premiere Pro, when I try to run the application, I get this error message: "the Application could not start correctly (0xc0000142). Click OK to close the application.

Similar Questions

• Error message "a program could not start. Please try again"when I try to send Remote Assistance invitation.

  original title: Remote Assistance does not work

  Win XP PRO SP3

  Question #1:

  When you try to send an invitation to support remote I get an error message "a program could not start. Please try again. »

  This error pops up before even the invitation is created, so the problem is with the creation of the invitation and not with problems of subsequent connection between the computers. The invitation is never created. This happens on several computers I own or maintain.

  The event log records all errors when this happens.

  I searched for hours all over the Internet and a lot of people seem to have this problem. Some it is resolved, for the most part, they needed to start a service, but the cause of their problem is not the same as mine.

  After restarting the computer, sometimes the invitation creation works fine.

  Other DIY suggests when the problem appears it can be corrected by running the command 'sessmgr-service' in a command line window. After executing this line it seems that the problem is resolved.

  What I find disconcerting is that Sessmgr.exe is the service Remote Desktop Help Session Manager that was already running, but for some unknown reason runs this line made work again right. I'll have to experiment more.

  Is it possible to debug and fix this?

  Question #2:

  When I can finally send an invitation it will work on the local network but not on the Internet. I can't connect to the Internet.

  I'm looking at the structure and the content of the invitation to http://msdn.microsoft.com/en-us/library/cc240167(v=prot.10).aspx
  In the example given here, as in the generated invitations in my experiences, the invitation contains only the LAN IP addresses (with port number) but no global address.
  RCTICKET =... 192.168.1.65:3389; Jeff: 3389

  How the computer expert is supposed to understand the global address to which it should connect is a mystery to me.

  How can I get Remote Assistance to work on the Internet?

  Hello

  The issue of Windows XP, you have posted is better suited for the IT Pro TechNet public. Please ask your question in the TechNet forums for assistance.

  Hope the helps of information.

• Hi people! When I try to launch of BF3, I get this error on startup - d3dcompiler_43.dll missing, why?

  The product name and number:

  HP Pavilion DV7-6151

  OPERATING SYSTEM:

  Windows 7, 64-bit

  Error message:

  When I try to run Battlefield 3, I get this error d3dcompiler_43.dll is missing, someone knows what to do?

  I bought the laptop 4 days ago, and I got no change is, its costs of the plant.

  I hope you can help me

  Hello

  On the CD of BF3, there should be a folder called DirectX. To reinstall directX runtime files.

  Otherwise, you can get it here

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=2da43d38-DB71-4C1B-bc6a-9b6652cd92a3&displaylang=en?WT.mc_id=MSCOM_DLC_US_DR_111SXX02959

• Windows 10 first Pro Crash when I try to run it.  I get the following error "the application could not start correctly (0xc0000142).  Click OK to close the application.

  I recently had to create a new disk and install the full version of Windows 10.  I can get all my apps Cloud creative install, but first Pro Crash when I try to run it.  I get the following error "the application could not start correctly (0xc0000142).  Click OK to close the application.  I reinstalled, reformatted the drive one reinstalled Windows 10 from scratch and I still get this error.  Has anyone seen this one?  My setup is below:

  

  Hi PK Gary,.

  I recently had to create a new disk and install the full version of Windows 10.  I can get all my apps Cloud creative install, but first Pro Crash when I try to run it.  I get the following error "the application could not start correctly (0xc0000142).

  Update for Premiere Pro CC 2015 (9.2) for a fix.

  Thank you
  Kevin

• When you try to install Windows Defender I get an error message "Service"Windows Defender"(WINDEFEND) could start. Make sure you have sufficient privileges to start system services.

  Original title: could not start the Service "Windows Defender" (WINDEFEND)

  When you try to install Windows Defender, I get an error message that

  "Service"Windows Defender"(WINDEFEND) was able to start. Make sure you have sufficient privileges to start system services.

  How can I check which privileges I have and I need?

  I noticed in the management of the tasks that Norton symlcsvc.exe ran and I was wondering if it was who collide with the Defender, so I temporarily stopped Symantec process running in the field of Services, but still had the same result, try to run the installation of the Defender.

  Help please

  Hello

  This error message is because you have Norton installed on the computer. See the for more information section below.
  http://www.Symantec.com/business/support/index?page=content&ID=TECH103119&locale=en_US

  Let's try the steps and check them off below if it helps.

  Step 1: You can try to uninstall Norton and then check if the problem persists.
  Note: Reinstall Norton after verification.
  Reference: http://support.microsoft.com/kb/307895

  Step 2: Change the registry value and check.

  a. Click Start, type regedit.exe and press ENTER.
  b. navigate to the following location: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows Defender\
  c. right-click on DisableAntiSpyware, on the right panel, then selectEdit.
  d. enter 0, under value data, and click on the OK button.
  e. close the registry editor.
  f. restart the computer.

  Registry warning:
  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• When I try to install my software, I get an error message that "Windows Installer could not be accessed".

  Issue of Windows install

  I just bought a HP Photosmart printer and I am trying to install the software on my computer. (OS is Windows Vista.) When I try to install my software, I get an error message that "Windows Installer could not be accessed". I ran "msconfig" and found that the Modual from Windows Installer status is stopped. How should I proceed?

  Thank you, Jeanne Vecere

  You could try to go to the MICROSOFT website, go to KNOWLAGE database and in the search bar, try the search for WINDOWS INSTALLER. Look for any version that is newer than the one you have. If this fails, try searching on GOOGLE. You can also try to do an update to WINDOWS VISTA.

  IF YOU ARE RUNNING 64-BIT WINDOWS, MAKE SURE YOU PRINTER WORKS WITH 64-BIT.

• When you try to install PDF Creator, I get an error message: "error 5 - failed to create the directory, access is denied."

  access denied for the creation of a directory

  When you try to install PDF Creator, I get an error message: "error 5 - failed to create the directory, access is denied."  How can I fix this?

  When you try to install PDF Creator, I get an error message: "error 5 - failed to create the directory, access is denied."  How can I fix this?

  Only when you try to install this application?

  What about BullZIP PDF Printer?

  (You can uninstall - trying to figure out if it's a problem of Windows or the question of enforcement.)

• Window named csc.exe. Application error, window that says "the application could not start correctly (0xc0000142). Click Ok to close the application when you try to run Microsoft solve this diagnosis

  Original title: Microsoft Fix it diagnosis

  I ran Microsoft solve this diagnosis. He gave me a window named csc.exe. Application error, window that says "the application could not start correctly (0xc0000142). Click Ok to close the application.  someone knows how to fix this?

  Thank you

  FOR EXAMPLE

  Hello

  Thanks for the reply. Until I'm your answer I have restored the laptop to the State of origin, with the possibility of restoring elements that had been added by the user. I'm trying to update windows, etc.. If I get errors or problems I will post them here. Thanks for your detailed response.

  Eddie

• Try reinstalling firefox on a windows machine 7 and I get «the application could not start correctly (0xc0000142)»

  To solve a different problem, I uninstalled Firefox. After you have solved the other issue I'm tying to re - install Firefox and get an error message that says that "the application could not start correctly (0xc0000142). Click OK to close the application. "The title bar of the window, said"setup - stub.exe - Application error. "My PC is a Dell Studio 19 all-in-one running Windows 7 Home Premium.

  I ended up solving this problem by doing a reinstall on Windows 7 site. It took a little while but fixed this and a few other issues I've had.

• Update fails, crashes when you try to run the ActiveX program

  Recently, I was not able to verify updates with my windows 2002 XP profession.  When I click search for updates, it wants to check my version of windows and run an activeX program, when I do it freezes the browser.  I tried several times with the same result.   Ideas

  PA bear thank you very much for the gift of your time and expertise.  For now, I think I well continue with option 1. like everything else seems to work ok.  This old desk top has decided me well and I see no reason why drastic measures at the moment.  Once again thank you!

• When I try to open Windows Live Mail I get this error: Windows Live Mail could not be started. error: 0x8E5E0408

  Help, I get an error when I try to open a direct mail

  Windows Live Mail couldnot be started. Closure of Windows Live Mail.Your calendar contains data corupt that forcing windows to close (0x8E5E0408)

  original title: 0x8E5E0408

  Hello

  When you use Windows live mail and the question you have posted is related to Windows Live, so it would be better suited in the Windows Live community. Please visit the link below to find a community that will provide the best support.

  Windows Live Mail Forum

  http://www.windowslivehelp.com/forums.aspx?ProductID=15

• When you try to install a program, I get this error: 'the «.\SPR32x30.ocx module.

  When I run a program on Windows 7 I got an error '"the module «.\SPR32x30.ocx' was loaded but the call to DIIregisterServer failed with the error code 0 x 80040200 & when I run the ar program administrator then the error as"the module".\SPR32X30.ocx filed to load. Make sure the binary is stored at the specified location or debug it to check the file binary problemwith or dependent. Dll file. the module specified counld not be filed. How can I solve the problem. I am the only user of no computer expert. Please give me a simple solution.

  Thanking you

  CA Piyush Kumar kingombe

  Many utilities and programs must be run as administrator in order to function properly, especially the more utility and programs that have not been updated for Vista yet.

  All the shortcuts in Windows Vista have a special property that you can set which will allow the torun as an administrator application.

  To set this property, just right click on any shortcut and click Advanced on the shortcut page to access the Advanced Properties dialog box.

  You will see a dialog with a checkbox for "run as administrator".

  Subsequently, the application is still running as an administrator if you use the shortcut to launch. (You will be prompted by UAC if you enabled it).

• When I try to uninstall a program I get an error message indicating the module not found

  I followed the correct steps to uninstall programs, but it seems that I'm looking for a program file that does not work or does not exist,

  Hello

  you do not tell the name of the program or the exact error message

  Try this free version of revouninstaller

  http://www.revouninstaller.com/revo_uninstaller_free_download.html

  or reinstall it and then uninstall it.

• When I try and some open programs I get this error 0xc0000005

  Original title:

  0xC0000005 error

  Hello! I'm not really good with computers, so sorry if it is really stupid.

  A week ago, out of nowhere, my computer randomly had a blue screen, then restarted.

  Once it restarted everything was fine, except that many programs have given oxc0000005 cases like photoshop and vlc media player.

  Also other programs have been sent me errors saying that the versions of the program are not compatible with my version of windows (sims 3, civilization 5 and internet explore)

  Other programs such as Microsoft office more, chrome, Firefox, windows media player work.

  I did a virus scan and nothing came, so I don't know what to do next.

  Hello

  Sorry for the delay in response. If you are still looking for a solution, you can try the following:

  As the error message has developed recently, you can perform a system restore and check if that helps.

  For more details, follow the links below.

  What is system restore?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  I hope this helps.

• Error correction: "the application could not start correctly (0xc0000142)" when starting still

  I get this when I try to start in and I don't know why.  I am running Windows 7 and since I had installed it.  I used it in the past, but now it does not work.  Any helpful suggestions would be appreciated.

  You must read the answer #4 in your other post How to create DVD w/out yet

  > running on Windows 7 and since I had installed it.  I used it in the past, but now it does not work

  It's a shame that you ask here before going to Win7 Win10

  An idea that MAY work to install or run some programs in Windows 10 old... works for some, not for others

  -http://www.tenforums.com/tutorials/15523-compatibility-mode-settings-apps-change-windows-1 0 - a.html

  If If a compatibility option does not resolve the problem, you yourself have improved in a program that does not work