After update today no response from the computer after restart on June 6, 2009

Similar Questions

• Older update can be removed from the computer

  original title: updates on my system< sony="" vaio="">

  I have an old laptop that has had many updates over the years somethings say this cannot be removed of course there are others who show that they can be removed, butthese removable without doing damage to my system? operating Windows and updates to internet explorer. Some are dated back to 2004 & 2005 that I want to do it safely.

  There is no such thing as 'old' updates.

  They are there to protect against a vulnerability or to provide updates to the o/s.

  The purpose of take away their defeats being there.

  If you need more space, you must put in a bigger hard drive.

  Or get an external hard drive and put your data on it.

  Gerry C J Cornell - a regular contributor here and I quote:

  You can create more free space in C in carrying one of the measures suggested below.

  The default allocation for the restoration of the system is 12% on your C partition is more generous.

  I have them would be reduced by 700 MB.

  Make my computer right click on your icon, and select System Restore.

  Place the cursor on your C drive select settings but this time find the slider and drag it to the left until it shows 700 MB and output.

  When you get to the settings screen, click on apply and OK and leave.

  A flaw that might be useless which is for temporary internet files, especially if you keep no copies on the disk offline.

  Setting the default value is 3% of the walk.

  Depending on your attitude to copies offline, you could bring it to 1% or 2%.

  In Internet Explorer, select Tools, Internet Options, general, temporary Internet files, settings to make the change.

  At the same time, look at the number of days, the story stands.

  The default allocation for the basket is 10% of the disk. Change to 5%, which should be enough.

  In Windows Explorer hover over your Recycle Bin, right click and select Properties, Global and move the slider from 10% to 5%.

  However, try to let you become so complete that if it is complete and you delete a file by mistake it will bypass the Recycle Bin and have gone forever.

  If your drive is formatted as NTFS another potential gain arises with your operating system on your C drive.

  In the Windows directory of your C partition you will some uninstall files in your Windows folder in general: $NtServicePackUninstall$ and $NtUninstallKB282010$ etc.

  These files can be compressed or not compressed.

  If compressed text the name of the folder appears in blue.

  If not compressed you can compress.

  Right-click on each folder and select Properties, general, advanced, and check the box before you compress contents to save disk space.

  On the general tab, you can see the winning amount by deducting the size on disk size.

  File compression is only an option on an NTFS formatted disk partition / partition.

  http://aumha.NET/viewtopic.php?f=62&t=33827

  Select Start, all programs, accessories, System Tools, system information, Tools, Dr. Watson, and make sure the box in front of "Add to the existing rating" is NOT checked.

  This means that the next time that the log is written it will crush rather than adding to the existing file.

  The setting of maximum size by default for Event Viewer logs is too big.

  Reset the maximum value for each log from 512 KB to 128 KB and set it to crush.

  http://support.Microsoft.com/kb/308427/en-us>

  Select Start, all programs, accessories, System Tools, disk cleanup to empty your trash and delete temporary Internet files.

  Also select Start, all programs, accessories, System Tools, disk cleanup, more Options, System Restore and delete all but the last system restore point.

  Run Disk Defragmenter.

  --

  I hope this helps.

  UTC/GMT is 15:36 on Friday 18 may 2012

• An error has occurred has not got a response from the software update server (update.local). What should I do to update my laptop?

  An error has occurred has not got a response from the software update server (update.local). What should I do to update my laptop?

  It is one of the many problems that occur on my mac.

  Update of OS X El Capitan 10.11.4?

  1. backup Mac.

  2. install 10.11.4 combo update.

  https://support.Apple.com/kb/DL1869?viewlocale=en_US & local = en_US

• I deleted my phone after the backup of photos were also deleted from the computer and iCloud

  I have an iPhone 5 and after upgrading my phone and transfer pictures, my computer screen went to sleep while he was removing all transferred photos off my phone as I walked away. When I went back and opens the screen, deleting was stopped, and even if I tried to have the iPhoto to delete 517 photos that were transferred, it would not be. So, while my phone was still connected to the computer, I scored manually 88 photos on my phone, following on the computer, ensuring that each photo that I retreat the phone had been transferred to iPhoto. Then, I went in the "recently deleted" on my phone and deleted those as well, so they do not take place. When I got back to the computer for the next round, I realized every photo that I had just deleted my phone also disappeared from iPhoto! I even checked iCloud and they weren't there. How can I recover these 88 pictures I deleted from my phone and why the hell did remove it from the computer?

  Any help would be appreciated. Thank you!

  Note: My operating system is OS X El Capitan 10.11.3 / / iOS on my iphone version 9.2.1

  iPhoto or the new Photos application on your computer?

  Note that if you have settings > iCloud > iCloud library enabled in your phone and if you have the menu Apple > System Preferences > iCloud > Photos - Options > iCloud library enabled in your Mac, all the photos you delete phone, the Mac, or directly on iCloud will be removed from all 3 places. Intend to iCloud photo library must synchronize all your pictures on all your devices and iCloud. More information on iCloud Photo library FAQ - Apple Support

• 80040609 win update still the same error again I go to Download Center to get the response from the forum

  Hi my friends

  -I went me to the Download Center to get the win live essentials 2011 but the update of the victory still give me the wrong number, please help me, thank you very much
   
   

  Hi, do Choai,

  Have you tried to install the update manually by downloading from the Download Center?

  Save to the desktop

  Right-click on the file and select run as administrator

  Windows Live essentials updates do not install on the computer.

  http://windowslivehelp.com/thread.aspx?ThreadId=9c35372c-5B0C-4AFD-A97B-2744225ce1d3

  http://windowslivehelp.com/thread.aspx?ThreadId=c54bfca2-5aa0-4A94-B556-d8b13f40aa2d

• blocks of Lightroom after the use of crops funktion. Export still works, but after you have selected the following image, lightroom must be inexplicable manually (no response from the program). environment: windows 7 adobe cc 2015

  blocks of ightroom after the use of crops funktion. Export still works, but after you have selected the following image, lightroom must be inexplicable manually (no response from the program). environment: windows 7 adobe cc 2015

  Turning off graphics acceleration. Go to preferences-> Performance tab and uncheck the box there.

• Dear Sir/Madam, as my Mac Air proved to be malware. I had to reset my computer. My adobe has been deleted by the agent from the computer. Now I have to reinstall my computer, can I have a serial number again? Thank you. I received your response, I still d

  Dear Sir/Madam, as my Mac Air proved to be malware. I had to reset my computer. My adobe has been deleted by the agent from the computer. Now I have to reinstall my computer, can I have a serial number again? Thank you. I received your response, I still don't know how to get the serial code. You could just please give me the original serial code? Thank you very much

  Check your Adobe account online for the serial number (toquickly find your serial number).  Otherwise, you will need to contact the Support from Adobe directly using chat to request serial number.

  To the link below, click on the still need help? the option in the blue box below and choose the option to chat...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Serial number and activation support (non - CC) chat
  https://helpx.Adobe.com/contact.html?step=PHSP-PHXS_downloading-installing-setting-up_lice nsing-activation_stillNeedHelp

• The computer was restarted after a bugcheck. The bugcheck was: 0x00000001 (0 x 0000000000000000, 0 0000000000000001, 0x00000000742d2e09, 0xfffff8800aa00b60).

  Computer BSOD'd 2 x today.  The event log States:

  The computer was restarted after a bugcheck. The bugcheck was: 0x00000001 (0 x 0000000000000000, 0 0000000000000001, 0x00000000742d2e09, 0xfffff8800aa00b60).

  LEAPC_INDEX_MISMATCHERREUR (1)
  This is an internal error in the kernel. The most common reason to see this
  error checking is when a file system or a driver has several mismatched
  visits to disable and re-enable the TTB. The data key item is the
  Thread-> CombinedApcDisable field. It's two separate 16-bit
  the SpecialApcDisable and the KernelApcDisable fields. A negative value
  either indicates that a driver has disabled APC normal or special
  (respectively) without reactivation; a positive value indicates that
  a driver allowed normal or special APCS (respectively) too many times.
  Arguments:
  Arg1: 00000000742d2e09, address of function or worker system call
  Arg2: 0000000000000000, thread-> ApcStateIndex
  Arg3: 0000000000000001 (thread-> SpecialApcDisable < 16)="" |="" thread-=""> KernelApcDisable)
  Arg4: fffff8800aa00b60, call type (system call 0-, 1 - routine worker)

  Debugging information:
  ------------------

  TRIAGER: Could not open the file of triage: e:\dump_analysis\program\triage\modclass.ini, error 2

  FAULTING_IP:
  + 0
  00000000' 742d2e09?              ???

  DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

  BUGCHECK_STR: 0X1

  Nom_processus: ccSvcHst.exe

  CURRENT_IRQL: 0

  LAST_CONTROL_TRANSFER: from fffff800032841a9 to fffff80003284c00

  STACK_TEXT:
  fffff880 '0aa00928 fffff800' 032841a 9: 00000000'00000001 00000000' 742d2e09 00000000'00000000 00000000'00000001: nt! KeBugCheckEx
  fffff880 '0aa00930 fffff800' 032840e0: 00000000'00001 c 48 00000000' 0780e0a8 00000000' 0780e970 00000980'00000018: nt! KiBugCheckDispatch + 0 x 69
  fffff880 '0aa00a70 00000000' 742d2e09: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: nt! KiSystemServiceExit + 0 x 245
  00000000' 0780e9b8 00000000'00000000: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: 0x742d2e09

  STACK_COMMAND: kb

  FOLLOWUP_IP:
  NT! KiSystemServiceExit + 245
  fffff800'032840e0 4883ec50 sub rsp, 50 h

  SYMBOL_STACK_INDEX: 2

  SYMBOL_NAME: nt! KiSystemServiceExit + 245

  FOLLOWUP_NAME: MachineOwner

  MODULE_NAME: nt

  Nom_image: ntkrnlmp.exe

  DEBUG_FLR_IMAGE_TIMESTAMP: 5684191c

  FAILURE_BUCKET_ID: X64_0x1_SysCallNum_4_nt! KiSystemServiceExit + 245

  BUCKET_ID: X64_0x1_SysCallNum_4_nt! KiSystemServiceExit + 245

  These accidents were related to the corruption of memory (probably caused by a driver).

  Run these two tests to check your memory and find which driver is causing the problem.  Launch auditor.  You don't need to run memtest again unless the auditor is not the cause, or you want to.

  If you are overclocking anything reset by default before running these tests.
  In other words STOP! If you don't know what it means that you're probably not  
  
  
  
  
  1-Driver Verifier (for full instructions, see our wiki here)
  
  2-Memtest. (You can learn more about running memtest here)

  Former pilot who need update

  dne64x.sys (Cisco VPN driver since 2008)

  If you continue to plant I remove Symantec and using MSE instead

  Symantec is a common cause of BSOD.

  
  
  I remove and replace it with Microsoft Security if you are using Windows 7 and if you win 8 or higher, use the built-in Defender.
  
  http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20080710133834EN
  http://www.Microsoft.com/security_essentials/

  Use it to Norton 360 http://Symantec.pcperformancetools.com/Norton-360-how-to-uninstall.html 

• HELP PLEASE! The computer was restarted after a bugcheck.

  I was hoping that someone could help me understand what is the cause. This has happened for the past 2 days on one of our servers. The server is a Windows Server 2008 R2 computer.

  That's the message in the event viewer:

  The computer was restarted after a bugcheck.  The bugcheck was: 0 x 00000050 (0 x 0000000000000001, 0xfffff800016d40cc, 0xffffffffffffffd0, 0 x 0000000000000000). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 030313-9156-01.

  This is the message that is displayed on windows re-opening after the accident:

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.272.7
  Locale ID: 1033

  More information about the problem:
  BCCode: 50
  BCP1: FFFFFFFFFFFFFFD0
  BCP2: 0000000000000001
  BCP3: FFFFF800016DE0CC
  BCP4: 0000000000000000
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 272_3

  Files helping to describe the problem:
  C:\Windows\Minidump\030413-8765-01.dmp
  C:\Temp\WER-83783546-0.SysData.XML

  Hello

  Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or cannot start Windows.
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  For BlueScreen troubleshooting methods using BlueScreenView and MyEventViewer see my
  answers if this thread - top 3 RESPONSES (+ 1 other).

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  --------------------------------------------------------------------------------------------------

  BCCode: 50 0 x 00000050

  References to Vista also apply to Windows 7.

  Have you recently added any hardware? Have you updated a driver just before
  These began? (Check control panel - updates of Windows to see if all drivers
  have been updated it there all the time, it started) main likely culprits are video
  pilot, other great drivers, memory and antivirus/antispyware/security products
  could be faulty as well as reader questions.

  Use the troubleshooter below and refer to the following message for pilots and
  memory when you get these sections and then return of the disease.
  game needed.

  BCCode: 50 0 x 00000050

  Bug Check 0 x 50: PAGE_FAULT_IN_NONPAGED_AREA

  PAGE_FAULT_IN_NONPAGED_AREA bug control has a value of 0 x 00000050. This indicates that invalid system memory was referenced.

  Important info if you received a STOP Code

  If you received a blue error screen, or a stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you have purchased
  Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer, Contact Support.

  If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

  These actions could prevent a mistake like this does not happen:

  1. Download and install updates for your computer from Windows Update device drivers.
  2. Scan your computer for computer viruses.
  3. Check your hard drive for errors.

  PAGE_FAULT_IN_NONPAGED_AREA parameters

  The following settings are displayed on the blue screen.

  Parameter	Description
  1	The referenced memory address
  2	0: Read operation 1: Write operation
  3	Address that referenced memory (if known)
  4	Reserved

  If the driver responsible for the error can be identified, its name is printed on the blue screen and stored in memory location (PUNICODE_STRING) KiBugCheckDriver.

  Cause

  Bug control 0 x 50 usually occurs after the installation of a faulty hardware or installation failure of material (usually associated with defective RAM, either main memory, L2 RAM or RAM video cache).

  Another common cause is a defective system service installation.

  Antivirus software can also trigger this error, as can a corrupted NTFS volume.

  Resolution

  
  Fix a defective hardware problem: if the material has been added to the system recently, remove it to see if the error recurs. If the hardware failure existing, remove or replace the faulty component. You must run the diagnostics of material provided by the manufacturer of the system. For more information about these procedures, see the manual of your computer.

  
  Fix a defective system service: disable the service and confirm that this resolves the error. If so, contact the manufacturer of the system service on a possible update. If the error occurs during the system startup, restart your computer, and then press F8 to menu mode characters that displays the choice of operating system. In the Windows Advanced Options menu that results, select the last known good Configuration option. This option is most effective when a pilot or a service is added at a time.

  
  A problem of antivirus software: disable the program and confirm that this resolves the error. If this is the case, contact the manufacturer of the program about a possible update.

  
  Fix a corrupted NTFS volume: run Chkdsk /f /r to detect and repair disk errors. You must reboot the system before the start of the analysis of disk on a system partition. If the SCSI hard disk, check the problems between the SCSI controller and the drive.

  Finally, check the system log in Event Viewer for additional error messages that might help determine the device or driver that generated the error. Disable the cache in memory of the BIOS might also resolve it.

  Remarks

  In general, this address is in the released memory or simply not valid.

  This cannot be protected by a try - except Manager - it can only be protected by a probe.

  BCCode: 50 0 x 00000050<-- read="" this="">
  * 1095.html? order = votes http://www.faultwire.com/solutions-fatal_error/page-fault-in-NONPAGED-Area-0x00000050-

  =========================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
  It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
  Ultimate and Enterprise)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• error message when try to sync the iPhone, "invalid response from the device?

  What can I do when I receive this error message when you try to sync to my iPhone 5 s - "invalid response from the device?

  -What are your 5 updating to 10.0.2 iOS iPhone? If this is the case, you must have the latest version of iTunes on your computer, which is required for Mac OS X 10.9.5 12.5.1, or above. To meet these specifications will be receiving this error.

• OfficeJet 5740: Cannot fax from the computer

  My new Officejet 5740, purchased on 11/15/14, worked fine until February 2015 - no problem with any of its functions, including faxes.

  That was all the time I went from a wireless connection to a USB connection and since then out of faxes cannot be sent from the computer, even if they can be sent from the printer by using the LED screen. There is no problem with the incoming faxes.

  Sending the printer with the LED screen is a nuisance of errors compared to the convenience of use of the computer. Lengthy discussions with HP Technical Support have been of any help. The technicians seem to think I should just give up and use the LED screen on the printer.

  After trying in vain to send an outgoing fax using the computer, the Fax status window appears saying "queue... "as the status of the fax, and it never goes one further.

  Is it possible that my passage in wireless USB connection type caused the problem? Maybe I need a different driver? If Yes, where can I download one, and what should I go for? Thank you.

  Hello @Harry46,

  Welcome to the Forums of HP Support! I see that you are not able to send a fax from your HP Officejet 5740 computer, you can send a fax from the front panel.

  I think you just need to update the drivers and software, please proceed with the following steps:

  1. disconnect the USB key if you use a direct connection.

  2. remove the HP software JO 5740 uninstall from the control panel of your computers an option of the program.

  3. restart the computer.

  4. make sure that all them that software JO 5740 has disappeared from the list of programs, but also your HP folder listed under all programs in your Start Menu.

  5. now, go ahead and download the software and drivers for your JO 5740 (DO NOT connect USB until the software prompts you to):

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-134701-2&cc=us&DLC=en&LC=en&OS=4063&productOid=6617254&sw_lang=&product=6617256

  6. go ahead and print a test page.

  7. If you are unable to print a test page, please run the HP Print and Scan Doctor- designed by HP to provide users with troubleshooting and problem-solving features needed to solve many common problems encountered with HP print and scan products related to Windows computers.

  Please let me know if this succeeds, can now send you a fax from the computer? I'll watch for your reply.

  Thank you

• "Please install the System86.dll file that is missing from the computer" during the installation of games

  Original title: "System86.dll"

  I'm having a problem during the installation of 3D games in window 7 ultimate

  Error code is: System86.dll

  I was using Window 7 Ultimate for a while, before a few days ago, when I tried to install the game in 3D (prince of Samuel), during installation, he gave me the message"Please install the file System86.dll which is missing from the computer" (sorry if my text is false I forgot the wording).

  Now, let me tell you what I did before: -.

  • I tried to restore my window
  • I sccaned my PC all a care as well as the microsoft essential security
  • What are malicious files had been found by Anti virus, they have all been deleted

  Can someone tell me how to get in touch with the support of microsoft agent?

  Thank you for reading my message, your response would be appreciated

  Take care of your self!

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/d08707ca-D670-4dae-9E12-5936ef6fb486

  If your version of win has pre-installed support is done by the manufacturer of your PC, MS, other support that the critical updates, is paid for request for assistance, unless you have a commercial version of victory

• When windows update (KB968930) power Shell2.0 and WinRm20 for win Vista tries to install the thugs of the computer then restarts and crashes again and again

  • When windows update (KB968930) power Shell2.0 and WinRm20 for win Vista tries to install the thugs of the computer then restarts and crashes again and again

  Hello LisaQuaranto,

  I suggest that you configure the computer to start in minimum mode, download the update from the Download Center and try to install the update.

  To perform a clean boot on a computer that is running Windows Vista:

  a. Click Start, type msconfig in the search box and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  b. on the general tab, click Selective startup.

  c. under Selective startup, clear the check box load startup items.

  d. click OK.

  e. When prompted, click on restart.

  f. after the computer starts, check if the problem is resolved.

  If your problem is resolved after the clean boot, and then follow the steps in the following article to narrow down the exact source:

  http://support.Microsoft.com/kb/929135

  In addition, refer to the section on how to restore your computer to a Normal startup mode by following the steps under "Reset the computer to start as usual", after performing the clean boot troubleshooting.

  You can download the update following the link below:

  http://support.Microsoft.com/kb/968930

  Thank you
  Irfan H, Engineer Support Microsoft Answers

• Receiving the message "Wireless association failed because Windows did not receive response from the access point or wireless router" _

  My laptop was working fine yesterday, but when I started it today I get the message "Wireless association failed because Windows did not receive response from the access point or wireless router.

  I can see my network and I can connect to the internet using my desktop pc, but just to make complicated I can't even connect to the network when I plug the ethernet cable into my laptop.

  I think it might be a driver problem, but I have no idea how to solve this problem without access to the internet on my laptop.

  I'm running Vista and my wireless router is an Atheros AR5009 809.11a/g/n

  I need step by step instructions on this Yes please treat me like a fool!

  Thank you

  Laptop would not work at home thus concluded that it was a BT Broadband do not issue my driver (despite BT telling me the opposite last night)

  After the call to a fantastic Lady in BT it's all fixed and thanks to Jack I now know a lot more on connecting wireless to my laptop!

• Epson Stylus Color 400 is unresponsive to commands from the computer

  Although it worked fine for the past three years, my Epson Stylus Color 400 suddenly stopped to respond to commands from the computer.   I have checked all connections and assured cartridges are full and OK.   After turning off the power and unplug the printer from the computer, then press the power button and the power button together and then release the two buttons (all according to the Epson manual) prints a number and alignment to check properly.   What did I miss?

  Hi Brian,

  Thanks for posting your question in the Microsoft Community forums.

  I see from the description of the problem, that this printer is not responding.

  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.

  To provide the proper resolution, that I would need more information on your side.
  Do you get any error messages?

  This problem can occur if the cables are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates, and problems related to the printer.

  Method 1:
  First, let's run this fixit who will help resolve the problem.

  Diagnose and automatically fix problems printing and printer http://support.Microsoft.com/mats/printing_problems/

  Method 2:
  If the first method does not resolve the problem, you can try the procedure described in the article and check if it helps.

  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Check out the link for more information.

  Why can I not print?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Let us know the status of the issue after you perform the troubleshooting steps. If you need help or information about the issue with printing, I'll be happy to help you. We, at tender Microsoft to excellence.