After upgrading to 12.0 I experience regular crashes with Firefox

Similar Questions

• I need a version 3.0 - ish of Firefox which is used on a registration site the webmaster has not upgraded and debugged the site to be compatible with Firefox 4.

  The site

  https://Fourwinds.com/OCF/login.php

  only works with Firefox as browser. The webmaster does not have upgraded and debugging for use with Firefox 4. I'm hoping to find a copy of the version 3.0 - ish to be able to access this web site. Any suggestions?

  You can get Firefox 3.6 http://www.mozilla.com/en-US/firefox/all-older.html

  If it's just for a site, an alternative is to keep Firefox 4 but install the portable version of the earlier version of Firefox on your hard drive. You can get http://portableapps.com/apps/internet/firefox_portable - section version inherited at the bottom of this page contains links to older versions of Firefox.

• After upgrading to IOS 9.1 my iPad2 crashes constantly and Safari takes more than 30 seconds for the loading of the page.  When Apple will solve these problems, given that the downgrade isn't possible?

  After that the IOS upgraded to 9.1 on my iPad 2, the unit has switched navigation performance and each app is lagging, and then crashes the device, to be hard restarts.  Changing such settings recommended in many articles does not improve these problems of performance or speed.  Given that the downgrade is possible, when Apple will release 9.2 to solve all these problems of performance?

  These are performance problems widespread in the complaints I've seen on many articles, even in this community and discussion forums.

  Uh, no.

  iPad 2 questions are far from "widespread".

  Each user who has problems with their brand of Apple devices claimed that their problems are widespread disaster.

  users of iPad 2, 3 and 4, like me, don't post troubleshooting forums if their iOS/updates updates update succeeded.

  Here are my updated list of corrections suggested for a model slow iPad 2, 3 or 4.

  Try to reset all the settings in the settings under general app and in the right column under restore.

  Try stories reset and delete/reset the caches in all web browsers you use.
  If you use Safari, these features may be in the application settings under Safari.
  Other browsers have their settings inside the running application itself.

  If your iPad has been activated for iCloud, in the application settings under iCloud, to the right, under iCloud Drive, type in iCloud drive and make sure that Safari is off to save data from Safari to iCloud by car.

  Also, under iCloud in the application settings, in iCloud Drive, turn the feature off saving for all other desired apps DO NOT the data automatically on iCloud drive.

  If you are using Safari is always causing issues.
  Try changing / using web browser third another, different.
  I do not use iOS Safari too much more because I found it cause me headaches on some Web sites, regularly, to visit.
  I commonly use another third party browser, perfect browser (there are others that can suit your style better web browsing, so look all first to see what third-party browser may work better for you) and I have never experience many questions that Safari was originally.

  In the application settings tab general, right under the spotlight sesrch, try disable the search under the applications who really don't need a research, as some games, remote controls, apps that are really useless to be searched, etc., in order to reduce the list to Spotlight search.

  Try to turn the reduced movement.
  This is found in the application of settings in the general tab, in the left panel.
  In the right panel, look under accessibility, look to reduce the Motion and turn this feature "On".
  You should see a significant performance increase on all models of iPad 2, 3 and 4.

  In the application settings under the general tab, in the right column, search background App update and enable this setting to "off".

  Try a reset of your iPad by simultaneously pressing buttons Home and sleep/wake button until your iPad goes to the dark and restarts with the Apple logo, then release the buttons.

• How make a regular crash with a component source multicam editing and keep the NEST?

  I just want to cut the source multicam in my edit sequence. My edit sequence already has another clip multicam inside. I just want to add a different multicam clip on it. I load the multicam clip in my source as a regular clip monitor, but when I hit edit, it cuts in all the traces of my mulitcam, instead of a track of the nested multicam clip. What I'm missing here? I just avid then maybe that's not really possible? My solution is to drag the clip source multicam tray on the icon of the new, which creates my clip nested within a timeline, copy the nest, then stick in my real Edition. Why so many markets for such a simple thing?

  What version of Premiere Pro are you using? If I understand the behaviour you statement, looks like you have the feature "KEM Roll" (new CC7.0) Insert value and crush Sequnces of the individual Clips. In the case where you do not know what I'm talking about, this feature is controlled by the button most left in the upper left corner of the timeline panel, next to the button magnet (Snap).

  If that is not linked, then maybe some more info on your workflow will help. Start off by explaining how you create your footage making - there are two methods.

• Delete this key after upgrade?

  Number of files remained since XP after upgrade from Microsoft store download. I scanned with Onecare? and also in playback of files with Notepad I get info on too many files of previous OS. I started to test the registry database. I have Computer\HKEY - Local - Machine\Software\C07ft5y\ WinXP do you know what it is because I think that it should be deleted. I've already removed the Windows.old folder when it was shown to me by disk cleanup.

  Hi StillVista,

  This link might give you a better idea of what the key: http://www.pcreview.co.uk/forums/thread-450340.php , especially to look at the number of positions 5 and 6. If you decide to delete (and I'm not able to say whether or not you should) then I suggest that you back up your registry database before making the changes, just in case where to remove it has a detrimental effect on windows. John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: Web: http://www.winuser.co.uk ; Web: http://xphelpandsupport.mvps.org ; Web: http://vistasupport.mvps.org ; Web: http://www.silversurfer-guide.com

• The status bar is missing after upgrade to 4 beta 4 beta 7 6.

  This old thread from blocking

  The status bar at the bottom of the window was visible when I was using Beta 6, but after upgrading to Beta 7 is missing. I restarted Firefox many times.

  The status bar was removed from the Beta 7 and replaced with the add-on bar. If there are special features of the status bar you want, you can use The status 4 Evar add-on to add them to the bar of the add-on.

• I bought the upgrade to lightroom from Adobe site 6, regularly paid with credit card, receive e-mail of confirmation of payment and the serial number, just start the program installation insert the serial number provided to me by email and I get this wa

  Bought @I upgraded lightroom to Adobe site 6, regularly paid with credit card, receipt of payment confirmation e-mail and serial number, just start the program installation insert the serial number provided to me by email and I get this warning: COULD NOT VALIDATE THIS serial NUMBER for LIGHTROOM CALL SERVICE since the upgrade I paid I might have a valid serial number thanks

  Have you contacted service the customer the message instructed? Generally, we cannot help with password issues in this forum.

• Problem of LTE connectivity after upgrade to iOS 10-SE

  Do not know if everyone knows this, but after upgrade to iOS 10 on my iPhone SE when I leave one area LTE and go to the services area or area No. less than LTE and re - enter a LTE area, I have no service. There is no service or reports 4g, but when I use an app, it says no network not connected. I tried all the usual stuff... Restored from backup, cleared cache, reset the network connections, did a hard reset, nothing works. The only thing that comes to LTE turns the phone then turn it back. All this experience? I have never had this issue before moving to iOS 10.

  I think you have the same problem described here:

  After briefly losing service, iPhone will fail to connect to the cellular network until you restart

• HP Pavilion p6210y: Office flashing after upgrade Windows 10

  I have a flashing desktop (goes black and office) after upgrade to Windows 10.  Once connected, it is fine for about 10-15 seconds, then it starts flashing. I couldn't do anything - click on anything except CTRL-ALT-DEL to go to the Task Manager.

  I did the upgrade 2 x already. Before my first attempt, I do nothing with my PC - I did not update the driver. When I arrived the office flashing after improvement, I panicked and immediately brought back to Windows 7. I was able to get to the window of recovery during the period of 10-15 seconds just after the connection. Fortunately, he returned to Windows 7.

  After the first test, I read a little about the similar problem and so I tried some of the proposed solutions - update the drivers on my PC, to disable reporting services Windows (all on 10 to win), to try to go to Safe Mode.

  So I tried again. I updated all the things I can to update (for most drivers) before the upgrade. Do you have PC Clean up. I had the office flashes again. It's the same thing. So while they are flashing, I tried to disable the windows reporting services that is very difficult to do with the Office of flashing. He did nothing clearly. So I went in Mode without failure. After starting in safe mode, I got the normal screen for about 5 seconds, but a blue window quickly flashed and then the desktop on Mode without failure just turned black, only the visible cursor.

  So, I rolled back to Windows 7 new.

  I don't have a lot of things/programs on my PC that I uninstall programs right away if I know that I will not use. I do scan of cleaning/Virus from PC on a regular basis.

  Information about my machine:

  HP Pavilion p6210y

  Windows 7 Home Premium, 64-bit

  Video card: NVIDIA GEForce 9100

  All the suggestions/help will be very appreciated.

  The only thing that solved the issue is reset my machine while keeping my personal files.

  I've never understood what really caused it.

  Thus, after the upgrade when the screen is flashing, I have reset the PC.

• HP Pavilion notebook pc p001tx: unable to find audio beats after upgradation from windows 10

  I have updated my windows OS 8.1 for windows 10 previously audio beats laptop after upgrading pc speakers it's been showing realtek high definition audio. I completely lost my beats audio experience. Please guide me how to fix this problem

  Have you looked in the control panel?

  With my current HP Omen 15 loan product specifications, this is where he now resides after the upgrade to Windows 10.

  Help us help you by displaying the following information.

  1. the full name of the model. or product number. the laptop - see web document this HP if you do not know how to locate the product number or model number.

  Try the following audio driver Realtek 10 Windows. It can return the function Beats to your laptop.

  http://ftp.HP.com/pub/SoftPaq/sp72001-72500/sp72139.exe

• Sattelite L50 - B - 1 P 1 after upgrade win10

  Hello I have a P L50-B-1 1 computer laptop and I have a few problems after upgrading windows 10
  1 video R7 driver missing so no present catalyst so I weak and box spring and frezess in games
  2 voice garbeld microphone when recording

  I know that the series is interrupted, but there should be some sort of fix for the problems I have atm experience.

  I don't want to go down to wind 8.1/7

  What are your exact specifications, processor, RAM and OS type 32-bit/64-bit

  According to what it is, you may be able to use the new Crimson AMD drivers instead. I have a L50D-C - 13 G and I abandoned the catalyst for Crimson drivers drivers and my machine is running great. I have a R6 of Carrizo A10 - 8700P with windows 8.1 and it works very well for me. The driver lists the compatible hardware, read it and see if your machine is supported.

  http://support.AMD.com/en-us/KB-Arti...tion_16.2.aspx

• HP Touchsmart 23-d055: do I need a new recovery disk after upgrade to Windows 10?

  I upgraded my 2 years, HP Touchsmart in Windows 8 for Windows 8.1 for Windows 10. It took me 6 hours to run all of these updates.

  Now, HP Support Assistant keeps reminding me to create an image of system recovery. But when I run the recovery media creation utility, it warns me that he goes back to the original operating system (Win8). Is it possible to create a recovery image system for my machine on Windows 10?

  I know that Windows 10 now has an automatic recovery partition. But I am concerned by the failure of the disk, which would make this unnecessary partition. Last year, when I've upgraded to win 8.1, I had an alteration of the disc that has occurred without known reason. I lost everything on the PC and to restore Win 8, and I've never touched the PC up to 10 Windows free update is out.

  I created a USB Win8 recovery disk when I got the machine. This is my only alternative? I suppose that if I ran the recovery media creation utility, it would recreate just the same.

  BTW, I know that HP has here a document, but it does on computers provided with Windows installed 10.

  • HP computers - create and use a Microsoft recovery USB drive (Windows 10)
  • http://support.HP.com/us-en/document/c04641788

  Thank you for your help and experience.

  Since no one has replied with an answer to my question, I've finally worked it on my own. I learned that you cannot make a new recovery disk system after the upgrade to Windows 10, if you had already created one when you got your machine under Windows 8.x

  Context: after upgrade to Windows 10, the HP Support Assistant kept prompting me to create a system recovery disk.  I did one when I got the machine 2 years with Win8.  I didn't replace my original recovery disk, so I went out and got a new 16GB USB flash drive. When I inserted this new drive and attempted to create a recovery disk, the PC told me I couldn't do one, because you are allowed to make a recovery disc by PC.

  So it was kind of stupid that after completing the upgrade of Windows 10, HP Support Assistant tells people to do. It should just check itself and see if a disc has already been done. All this anguish for nothing!

• video distortion SVF14N13CXB after upgrade from Windows 10

  Distortion of the image on the video playback and webcam after upgrade to Windows 10 years of experience.

  Have seen the articles recommending power off of the x-reality, however, it has been deleted during the upgrade process.

  All the drivers appear to be up-to-date.

  Problem solved

  Had to install update for Vaio Control Center by using Vaio Update

• Satellite A200-10N (PSAE3): Fn key does not work after upgrade to vista any time

  After upgrading Vista-Home - Premium--> Vista Ultimate shortcut with the fn keys does not work, for example Fn + F6/7 (brightness).

  New value pack installation has not been successful.
  Moreover, after upgrading the drive to DVD from Toshiba is default, too.
  Who can help?

  I didn't try any update on my A200 but you can try to follow: install Vista using recovery media delivered. When Vista starts for the first time go in Panel and you can find Add/Remove Programs option. Remove all the stuff designed by Toshiba.

  When we remove everything, making Vista upgrade. After finishing Vista upgrade install all the stuff of Toshiba designed by order of specific facilities starting with added value package. Check please the download page if all of these tools and utilities are available.

  As far as I know all the tools and utilities are designed as universal tools and I can't imagine that there is a difference between the version of Vista ultimate or premium tools.

  DVD player is part of the image of the installations only and I can imagine that upgrade installation has changed something, but the upgrade procedure is responsible for this. I don't see any connection to Toshiba.

  As I said I don't have a CD to upgrade, but if I find one I'll try to test it on my Vista (Premium) preinstalled A200-1CR.

  Bye and I hope that you report your experiences with the Vista upgrade again.

• Wireless button not work (orange rest) after upgradation from windows 8

  the orange wifi light does not change to white light after upgrade to windows 8 windows edition OS Home premium. I don't use the pavilion dv6-7011tx laptop, my product. is. B0P39PA #ACJ this is very frustrating as theres no wifi as well as bluetooth connectivity, the solution button wireless key doesn't help. HP guys please give a solution that we expect more than a month.

  If you open Device Manager (key Windows + X and select Device Manager) and see an unknown device with the following details as in the picture.  I had the same bad experience when I upgraded my Hp Envy17-3002ea loan last weekend.

  

  then download and install sp59720 should do the trick.

  Best regards

  ERICO