After using a CD recovery on my netbook, I can not connect to the wireless network, I used to connect to

Similar Questions

• After cleanind my registry with Wise Registry Cleaner, I can not connect to the internet.

  Network connection problem

  Hi all

  After cleanind my registry with Wise Registry Cleaner, I can not connect to the internet. Network LAN and wireless do not work. Windows 7 has diagnosed the problem and says the following:

  There might be a problem with the driver for the wireless network connection card

  Windows could not automatically bind the pile of IP protocol for the network card.

  There might be a problem with the driver for the connection to the Local network map

  Windows could not automatically bind the Protocol IP on the network card stack.

  Details of detection

  Diagnostic information (network card)

  Network card diagnostics information:

  Network adapter driver to connect to the Local network information:

  Description... Broadcom NetLink (TM) Gigabit Ethernet

  Reference the manufacturer... Broadcom

  Provider of... Broadcom

  Version... 14.0.1.0

  The name of the INF file... C:\Windows\INF\oem5.inf

  Date of the INF file... 14.05.2010 21:21:56

  Name of the section... DEV_KEY2. NTamd64.6.1

  Hardware ID... pci\ven_14e4 & dev_1692

  Instance status indicators... 0x180200a

  Status code from device Menager... 0

  IfType......................... 6

  Physical media type... 14

  Similar to Wireless adapt. The problem is probably not the antivirus program, since I have only deinstaled and the problem persists. I've also uninstalled and reinstalled the drivers, but no solution again. I can't do a system restore point before cleaning the registry, because Windows could not find a file that is needed for the restore. I restored again since before saved registry cleaning but no help.

  Any other ideas please. This really seems teribble :(

  Thank you

  Nikola

  Hello

  You can try all reset them TCP/IP and WINSOCK by this order from the high command prompt:

  netsh winsock reset
  netsh int ip reset log.txt

  How to run the command prompt as administrator (high) is here:

  http://Windows.Microsoft.com/en-us/Windows7/command-prompt-frequently-asked-questions

  part:

  How to run a command with elevated privileges?

  LC

• I use msi CR410, but I can not turued on the wireless capability can halp me

  How turued of capacity on my loptap

  Hi CHUM,

  I suggest you try the steps from the following link to activate wireless.

  Setting up a wireless network

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  Keep us updated on the status of the issue.

• Problems connecting to the internet using the wireless network connection

  I can't connect to the internet using my wireless network connection. I had made the diagnosis and he stated that "the DHCP is not enabled for the wireless network connection. I had checked the DHCP, but it has been activated!... Someone would give any suggestion for me to solve the problem?

  Open the run command box by pressing Windows key + R, type services.msc and press enter . Search The Client DHCP and check if it is enabled or disabled. If disabled then turn it on and see if the problem still persists or not.

  Open the run command box by pressing Windows key + R, type cmd , and press enter . At the command prompt, type ipconfig/all and press ENTER. Now, check the IP address, default gateway, DNS etc. If you find all the information is correct, but you cannot yet access the Internet so if you connect the wireless network is secure or not. To determine the glance to the wireless network icon in the taskbar, then click on it. It will show you the available wireless networks. If there is a "yellow shield" present on the network icon, the network is not guaranteed, if there is no "yellow shield" does while the network is secure. In a secure network, you might have a "network security key. In this case try to disable the 'Network security key' option for this network. To do this:

  Open Control Panel , click network and Internet , click network and sharing Center , click manage wireless networks on the left.

  In the list select the wireless network and do a right click, select Properties, Security disable tab all options that is, in security type do not select no authentication (Open) and to the type of encryption , select none . You can also activate the automatic connection and SSID settings to further enhance connectivity, on the connection tab, click to select the "connect automatically if this network is in range " and "check boxesto connect even if the network is broadcasting his name (SSID) .

  For more information click here and see how you can determine whether a network is secure or not.

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-know-if-a-wireless-network-is-secure

  If the problem still persists, then check your firewall settings and make sure that the firewall is not blocking your Internet connection. Some software Antivirus has a built-in firewall and they block by default all unknown connection to the tightening of security.

  Try to restore Windows Firewall default settings. Open Control Panel click on network and Internet , click system and security , click Windows Firewall , click default settings .

  Hope this will help. Thank you.

  Arup Ratan Paul

• HPC8180 printer connects to the wireless network, after upgrade firmware to the router wireless

  My HPC8180 has been wireless since I bought it some time ago.  I recently had to upgrade the firmware on my router wireless of Netcom NB9W and since then my HP will not solve for the wireless network.

  I run the wizzard of wireless network on the printer, select the correct SSID and enter the WEP key according to the instructions.

  It will then not connect.

  Print the summary I have says that it passes all except:

  No filtering = Fail

  Connected = do not run

  Signal strength = very weak (which is strange because it is about 10 feet away from wireless router).

  Other networks detected matching your network name (SSID) = No.

  Summary says:

  Network Name (SSID) altnet (correct)

  Address IP = not applicable

  Configuration source = not applicable

  Communication mode = Infrastructure

  Authentication type = open system

  = 64-bit WEP encryption

  I have NOT activated the mac address filtering

  Any ideas?

  Your router appears to be a DSL modem-router.  Those who can be difficult to connect to.  In addition, WEP can be problematic and is no longer a measure of security.  WEP can be broken in 10 minutes approximately with the freeware on the internet.

  We will do three things:

  1. replace the WPA or WPA2 encryption.  You can make your own password.  Do 13 or more characters, numbers and uppercase and lowercase letters.

  2 reset the default settings on your printer network (configuration > network area).

  3. attach to the router in this way:

  Sometimes the DSL providers have more control over the router like the printer.

  -Unplug the phone line from the router
  -Cut the power to the router, wait 30 seconds, then turn on the power.
  -Go through the normal process of the printer connected to the device (wireless configuration wizard)
  -Now to find the IP address of the printer (it should be on the self-test printout), type it in a browser.
  -On this screen, you will find a tab management network, then on the left wireless, then the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you know what it is, set an IP address outside this range but not exceeding 254 (the last number of the address).
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Let the white gateway and DNS
  -Finally, connect the telephone line, restart the router and the test.

• I can not proceed with the installation of EL Capitan after downloaded because my same unaccepted Apple ID if the correct password overlay

  Salvation;

  I tried to upgrade my macbook pro OS Yosemite to El Capitan, but I can not proceed with the installation of EL Capitan after downloaded because my ID Administration Apple not accepted even if correct password entry.

  By navigating through ' assistance from Apple is in charge to retrieve the Apple ID, I deleted the keychain, now the problem is I can't add the new keychain.

  Please help as I am now hung the message not found "Login" keychain... then reappear.

  Thank you

  Mel

  Okay, so you didn't get very far in the installation.

  Here's how to reset a forgotten password.

  Do you have a backup before the upgrade, such as a time Machine backup?   (Keychain is not containing the administrative password, unfortunately.)   You remove the login keychain, all stored passwords in Safari and in fact be lost.)   If you have, I would recover the set of connection from there.

  If you don't have a current backup, it's the first think you get.

  There could be a problem with the disk or of protection structure, or with the disc itself.    Creating a new keychain cannot be blocked, short error permissions or a drive problem.    Disk utility and check the drive and see if there is something to do.   (Unfortunately, some of these steps require an administrative password.)   You can try the repairs or a backup to disk by booting from the recovery partition - that won't require no administrative privileges - and attempt a repair or recovery from here, or save the entire drive disk external work.

  You have another Mac around, where certain tools can be generated and can then be used here?

• XP Home - can not connect after a change of drive assignment

  I am running XP Home Edition on a system of several disc. For historical reasons I run XP on the D: drive and it normally works fine. I also have a C, E, F and G drive. I wanted to change my d drive to C drive according to standard systems. I changed the course of C to be I: but now I can't load Windows! Instead, once I entered my password it simply returns "logout". Naively, I assumed I would be able to return to disk management, if I had a problem... Obviously, the system must always and use the drive C. is there a way I can reverse the situation of the recovery console or another method?

  Hello
  OK, I solved the problem! :) That's what I did:

  I downloaded a copy of Ultimate Boot CD for Windows
  I used the built-in Registry Editor to modify System\MountedDevices
  Located at \DosDevices\I and it has changed (back) to \DosDevices\C
  Rebooted and everything is ok now!

  Microsoft 223188 article was helpful, but there are no articles that tell you how to fix the problem, if you can not connect on XP in the first place! I understand that Microsoft does not support the UBCD4Win startup but it has never offered tools equivalent system of his own other than the recovery console...

  In any case, thank you very much and a happy new year!

  Louise

• I have a toshiba laptop purchased recently. After the scheduled updates it does not recognize the wireless network. I have to do a system restore. is there a solution for this problem?

  I have a toshiba laptop purchased recently.  After the scheduled updates it does not recognize the wireless network. I have to do a system restore.  is there a solution for this problem?

  Hello

  Make sure you have the latest network adapter drivers fron toshiba

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  and if windows update is at the origin of the problem change how to get updates to uncover the problem update

  When you have found the issue, a right click on it then invited uac then hide

  read the information on the link below

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

• Can not connect to web access SX20 after factory reset

  Hi all

  I have a problem when I reset factory SX20. I finished off SX20, then hold the power button for 10 seconds until what he puts to Flash. Then press the power button twice. I don't know it have already been reset factory state yet.

  But after this, I can not connect by web access. I can ping to SX20. but I can not connect on the Web or Telnet and I don't know what are the admin user and the password.

  can you help me for this?

  Please, help me to check it out.

  Thank you all

  If you are able to navigate to the login screen by using a web browser, the default username is "admin" without password.  Telnet is disabled by default.

• Can not connect to laptop with windows password 8 after update

  Have a new laptop (ASUS) with windows 8. The laptop using my live account from microsoft for the login screen. After that the first windows update, I can not log on the laptop and had to have Best Buy reload windows 8 and start over. There is no way to unlock this processor without the password. This happened once more. I can log in to my account windowslive using a different processor, but cannot unlock the password of login by using the same password, as I did before the update. Other ideas that take over to Best Buy and getting the laptop with windows 7?

  Hi WillieReed,
  Thanks for posting on the Microsoft community!
  Do you see the error codes/messages when you try to connect?

  Here are some solutions: -.
   
  1. ensure that Microsoft account services are running, go to the page of the service status.

  https://status.live.com/

  2 reset your password from Microsoft
  To reset your password, or get help with a password and other problems with your Microsoft account, go to reset your password.

  https://account.live.com/password/reset

  3. check the length of your password
  Make sure that your Microsoft account password length is not more than 16 characters. The current maximum limit is clearly indicated during your initial account registration Microsoft upward, but may not be clear during a password change. The password change process to enter more than 16 characters, but your account will not accept anything more than 16 characters. You can change your password from Microsoft by clicking on change your password. (You may need to connect to your Microsoft account before you can access this Web page.)

  https://account.live.com/ChangePassword.aspx

  4. get on your Microsoft account to check if its been blocked or pirate by following the link below
  http://Windows.Microsoft.com/en-us/Windows-8/get-back-blocked-hacked-account

   

  5. you can also follow the link below if you have forgotten your Windows password
  http://Windows.Microsoft.com/en-us/Windows-8/forgot-Windows-password

   

  Hope this solves the problem, you can write back to us and we will be happy to help you further.

• Can not connect to vcenter after reboot

  Hello VMware,

  I can not connect to vcenter after reboot with the error «Failed to connect to the Vmware research service»

  

  I tried to follow below doc but no help.

  http://www.myvmwareblog.com/2012/11/28/lookupservicesdk-SSL-certificate-verification-failed/

  I tried to play with the Vcenter screen underneath, but no luck.

  
  

  To resolve this problem, replace the VCSA IP with hostname VCSA in the search service configuration file, ls_url.txt file.

  To replace the VCSA IP address with the host VCSA name in the ls_url.txt file:

  1. Connect to the VCSA via ssh under the root user
  2. Go to the directory/etc/vmware-sso using the command:

     CD/etc/vmware-sso

  3. Make a backup copy of the file ls_url.txt using the command:

     CP ls_url.txt ls_url.txt.bak

  4. Open the file ls_url.txt using a text editor
  5. Replace the VCSA IP address with the host name of the VCSA. For example:

     https:// Lookupservice/XXXXXXXXXX/sdk

     Where XXXXXX is the host name of the VCSA.

     Note: It is usually the host name of the domain the VCSA FULL name. Make sure it matches the common name (CN) in the certificate name.

  6. Restart the VCSA services by running the command:

     restart the /etc/init.d/VMware-vpxd
     restart the /etc/init.d/VMware-SSO
     restart the /etc/init.d/VMware-InventoryService

     Or

     Restart the VCSA.

  Alternatively, you can use this workaround to regenerate the certificates for the vCenter Server Appliance.To to regenerate the certificates for the vCenter Server Appliance:

  1. Temporarily change the IP address of the vCenter Server Appliance to a different IP address, not used
  2. Restart the vCenter Server Appliance
  3. Change the IP address of the vCenter Server Appliance to the originating IP address
  4. Restart the vCenter Server Appliance
  5. Connect to vCenter Server Appliance, https://vcenterserveripmanagement Web page: 5480
  6. Click the Administration tab, and then select Yes to certificate enabled regeneration
  7. Click send to save the changes
  8. Restart the vCenter Server Appliance

• Can not get on the internet when you use the merge with WindowsXP

  I upgraded to Fusion 2 and am running Windows XP.  Windows XP has not check when I installed it because I wasn't getting on the internet because of all the viruses that draws windows.  Now I find that I have to check Windows after 30 days.  I can't WMWare to help me after 30 days of free support (which is a bunch of Bull).  Anyway, I tried everything that is listed in this forum and through the FAQ, the s and videos and I still can't get it to work.  Can someone help me please?

  Jim

  JudgeJim wrote:

  Problem: I can not go on the internet whenever I'm on Windows.  My Mac is not a problem with online.  When I start the merge, I agree, but when I start Windows XP, it tells me this:

  Could not open/dev/vmnet8:

  No such file or directory.

  Virtual device Ethernet0 will start disconnected

  Sometimes it will say instead of vmnet8 vmnet0

  If you have found errors like that something is not right.  Have you tried to uninstall/reinstall Fusion? Note: This is not the virtual machine at the request of Fusion.

  I tried which was published for the myers40k (adding ethernet0.virtualDEV = "e1000" to the .vmx file) but that didn't fix it when I restarted merger/Windows (the text .vmx file was closed).

  This is for Windows Vista not XP and you should not apply for bugs for Vista on XP unless you know that it is normal.  So sometimes it's better to ask to be sure before try you things are written to him in a team oriented to a specific operating system.

  I also turned off and reset the network using NAT and bridge under network settings, and from the command prompt (I'm not too comfortable with the command prompt) at the command prompt, my IP address showed this: fe80::5445 etc, but it did not show my correct IPAddress, just this list of characters.

  I have broadband with a Linksys WRT54G Router. I bypassed the router and went directly to the computer. I think it must be in the software because it did not help

  If your router does not work properly, you should be able to use Bridged to network client, but without the router online, you need to set the client to use the default NAT network.  If you change the types of networks while the guest id launched, you must release/renew the IP address.  Restart then comments does this, but there are other means and until you learn what they are just restart the guest of change so that the client is not running or suspended.

  I would start by checking the .dmg against its published MD5 sum file you have downloaded VMware to make sure that it is not corrupt.

  Uninstall/reinstall Fusion and restart the Mac.

  Start merging and then the virtual machine and it if error reports after the exact wording of the message and a screenshot if needed.

  If she has any errors and you can't even access the Internet, then you need to validate the other information requested previously or there is nothing else that I can do without checking the parameters of the information requested previously.

• After that I changed the apple ID password I can not connect to facetime

  After that I changed the apple ID password, I can not connect to facetime

  Update your password for Facetime, too.

• I'm using Firefox Portable and lack the 'Extra' _Menue been updated to Version 11. And "No, I can not add with the toolbar customization."

  I am using Firefox Portable and lack the menu "Extra"since updated to Version 11. And "No, I can not add with the toolbar customization."

  What is this extra menu?

  In some languages of the menu Tools is called Extra, so you can watch in this menu to see if you can find what you are looking for.

• After factory reset, I can not connect my iphone6 with itunes

  After factory reset, I can not connect my iphone6 with itunes

  What happens when you try? You get errors? -AJ