After VCP 5.0

Similar Questions

• career of VCP ahead!

  Hi all

  Please will you some stress during the career now whats coming after VCP.

  Last month I erased VCP and have 2 years of Total exp.on this basis that is the opportunity to work... is it wll be any edge after being VCP.

  No matter which also do Vmware itself let me know how can I do part of Vmware mmee family. Itried on Vmware careers... but the difficult feeling of looking at this place.

  Thanks in advance!

  The big question is where are you located, even if the global economy is not strong but for VMware jobs there are about more than 1,200 jobs on dice.com whenever you search for the keyword 'VMware' which means you have a lot of chances and shot to work at VMware VAC partners and most likely you get an implementation of the P2V project that makes pretty decent 40-$50 / hour + depends first on how to negotiate and oenophile evidence.  I would start by VMware VAC for more hands on experience and after you feel comfortable with everything and with 4 + years of experience I would contact the VMware PSO for the possibilities of employment, but now its better to continue to learn and get your hands on as much as possible through partners VAC.

  If you found this information useful, please consider awarding points to 'Correct' or 'useful '. Thank you!!!

  Kind regards

  Stefan Nguyen

  VMware vExpert 2009

  iGeek Systems Inc.

  VMware, Citrix, Microsoft Consultant

• Best Certification path

  Hi all

  After VCP - VTC 5.5, I'm confused what to take certification path.

  I looked at the roadmap of certification:

  http://myLearn.VMware.com/portals/certification/

  My question:

  Is it better to upgrade to VCP6 - VTC and wait for the VCIX6-VTC?

  or

  Go to VCAP5-DCD / VCAP5-DCA

  
  

  Thanks in advance!
  

  Depends on what you use the most and how much time you have done on the VCAP exams. If no then I wanted to wait for VCIX-6 and just do one of these exams and then you will get automatically the VCP6. Rumors are VCIX exams are early next with the beta version due to arrive any day now

  Gregg

• VCP - DV after training on installation configured manage 5.0

  
  Dear all,

  I attended the training in our offices online fot installation configuration manage 5.0, we were two people and enrolled in training, I was also at the conferences while my colleauge was interacting in the virutal for any question we had. Now I want to prepare for the exam VCP - DV but it is mentioned that he needs to participate in training courses and then hands on experience then we are eligible for the examination.

  For what about hands on experience, I have it as we have virtual environment in our office for companies but for the transcription of the qualification training is the name of my colleauge, in this case how can I register for the exam?

  Please notify.

  Kind regards

  Jocelyn

  You can register only after obtaining a transcript in your name. Hands on experience is something that you need to become familiar with the technology. But without qualification training, you cannot meet the certification.

  VMware has recently made many changes to their certification roadmap. You can take place VCA-DCV(Associate level certification) without and the required qualification exam. Take a look your blueprint VCA - VTC here.

  One thing is, if you are certified secure Channel-cloud or PCV - DT, you won't have the qualification. If this is your first VCP, you will have to follow the training and take the certification.

• Need help for VCP training after clearing the exam VCP510

  Hello

  I'm Kelly, I managed VCP510 review but not followed the VCP 5 ICM training. Now, I am registered for the training but need your help in this.

  How VMware will know that I passed the exam and how it will get the details of my training? (Is there a procedure while registering for training to provide details as Exam Centre marksheet, VCP ID etc.)

  Hope you understand my query

  Best regards

  Yoann

  After completing the training you will need to send an email [email protected] - this is one of my 'frequently asked questions' on my blog: http://vmwaretraining.blogspot.co.uk/2012/06/vcp-common-questions.html

• The question after having passed the VCP 4 months after class

  Yesterday, 12/23, I spent my VCP-310 on the first attempt after taking the class Fast Track V3.5 back in August ' 08. Big shout out to Mark Fei and David Johnston, who were the instructors for this category - thanks guys!

  The review was almost at the same level as the level of difficulty, I waited - some of the questions that came I was not waited, but made more educated guess efforts... Still managed to achieve a score of 85%, which I am more than satisfied.

  A few questions...

  1. my VCP number seems to be an incremental number. Which does not indicate the number of candidates for the exam, or the number of people who have passed, or is it a somewhat random number?

  2. What's included with the welcome kit? I was a little disappointed to learn that it takes 6-8 weeks to get here. I was hoping to at least get some kind of recognition of VMware - as account information secure Channel being sent to me. Instead I asked him by e-mail.

  3. can I I consider myself as a secure Channel now, or I have to wait for the welcome kit to make it official?

  Thank you and Happy holidays everyone!

  All first off the coast of congratulations for joining the world ever-increasing VCPs!

  1. my VCP number seems to be an incremental number. Which does not indicate the number of candidates for the exam, or the number of people who have passed, or is it a somewhat random number?

  Yes it is progressive but over the years, that VMware has ju, ped in the sequence is not good indication of County VCP - last article I saw said 20000 + VCPs worldwide

  2. What's included with the welcome kit? I was a little disappointed to learn that it takes 6-8 weeks to get here. I was hoping to at least get some kind of recognition of VMware - as account information secure Channel being sent to me. Instead I asked him by e-mail.

  I know it's disappointing, but you said approaching the right way - they will provide this information for you.

  3. can I I consider myself as a secure Channel now, or I have to wait for the welcome kit to make it official?

  Yes you can-

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• How exam VCP can be changed after releasing the vSphere 5.1?

  Hi all

  I am preparing to review the VCP of vSphere 5.0, and now vSphere 5.1 came out, so I have a few questions on the possible evolution of the review of the VCP in near future:

  -Do you know or can you guess when the knowledge/skills based on vSphere 5.1 will be tested on the exam?

  -Exam based on vSphere 5.1 will be a separate with its own code review, or the current review of the VCP5 is updated to include the content of vSphere 5.1?

  -If the VCP5.1 exam (based on vSphere 5.1) will be a separate consideration, it will replace the current VCP 5.0 review? or the two exams for vSphere 5.0 and 5.1 coexist at the same time?

  I have invested in current VCP5 exam, so I just want to know if I take VCP5 review the earlier to avoid the review update/update/change? or don't have to hurry because vSphere 5.1 will not affect the current review of the VCP5?

  Thank you very much for the advice,

  Minh

  This question comes up every time VMware a minor version of vSphere, and the answer is that PCV tests are independent of minor versions. VCP510 is the exam for VCP for vSphere 5, not 5.0 or 5.1.

  The certification team go through each of the questions in the pool for the review and ensure that each item is valid for all minor versions. Unless VMware publishes a new examination plan that specifically call 5.1, you can continue your preparations you are today.

• Time for examination VCP after taking the training course?

  Hello.

  Can someone answer me if they know if there is a limit of time for me to get VCP certified?

  I took the "VMware Infrastructure 3: install and configure" course at the end of 2007, it was obviously in ESX 3.0 and VC 2.0.  Due to several factors, I never sat the examination.  So basically I've missed the boat, and second, if I'm still good to go I can take the 3.5 review?

  Answers greatly appreciated.

  Thank you.

  You can take the exam... until VCP310 exam is removed.

  It is not yet an official date:

  VCP VI3 Test expires?

  VCP exam 3 - when he retired?

  André

• The review of the UCS and VCP

  Hi all

  I do not have a secure Channel and yet so I will at least make the test of the UCS?

  Is-Cisco has a system as they will allow us to test of the UCS, but they will not give us unless we are SECURE.

  Thank you

  Ismail

  Hi Ismail

  You can always take the test and still qualify as a Cisco Unified Computing Technology Specialist of the design and a Cisco Unified Computing Technology Support Specialist without a PCV.

  But if you're after Cisco Data Center Unified Computing Support Specialist, etc. then yes VCP is always a pre - req (I heard that there will be rejected in favour of a managed Cisco equivalent, but who is without merit)

  Unfortunatley (that I found) just passing examination VCP wasn't enough, but the VMware course is also a mandatory requirement for VCP VMware.

  Good luck with it.

  Concerning

  Colin

  http://ucsguru.com

• Network connectivity lost every 24 hours after the migration of DVS

  Hello community...  Well, I'm puzzled again.  I am running a vSphere 5.5 U3 environment with the latest patch.  I'm going through certification VCP - VTC prep and decided to migrate my (lab at home) environment of standard virtual switches to virtual switches distributed as I have not had a lot of experience with them so far.  Migration seems to be okay.  Before migrating, I used three different 1 Gbit/s links a group of hash LACP-IP on my standard vSwitch.  I have several VLANs for different laboratory networks.  One is specifically used as a DMZ for the WAN to my ISP connectivity.  I created a virtual machine for use as a firewall with multiple network cards, which one is connected to this VLAN WAN.  On the standard vSwitch seemed to work exactly as expected.  For some reason any after moving to a DVS, the firewall VM needs to be recharged all morning before the full network connectivity is restored.  It's a strange problem.  I tried to re - create the virtual machine and play with the security settings of DvPortgroup, but the problem persists.  Anyone out there have any ideas as to what could cause this?

  Oh, a little more in detail...  I moved from hash balancing LACP/IP road based on the physical NIC load with the migration to DVS.  Remove groups from the aggregation of connection of the switch too.

  Well, change of load balancing policy and upgrade the DvSwitch to version 6 did not help.  However, I stopped the machine virtual and added 4 E1000 NIC as a test.  I've reconfigured the firewall VM to use the new cards instead of the VMXNET3.  Load Balancing has changed back to "load depending on the physical NETWORK card" and always use VGT to separate traffic.  From now on, he went the longest without experiencing the issue so far.  About 16 hours so far without having to restart the virtual machine.  Will keep posted guys.

• VCP 6 cert

  Since when Vmware forcing students to take two exams to get the PCV?

  anyway I want to win the Cert I do basic theoretical training and study with CBT Nuggets VCP 6

  is there a review for the VCP6 plan on?

  You can self study and sit for the examination, there is no mandatory requirement to take courses after that.

• VCP 4.1 certification renewal

  Hello

  I currently have the certification VCP 4.1 VTC and I know it will expire after May 8.

  As far as I understand, for a new certification, I need to pass (for example) VCP550 review and take official courses 2 days what is mew [V4. V5.5 X].

  My understanding is correct? If so, is it possible to take courses after this deadlie - may 8, with VCP exam before this date? It's nice a critique for me there is no [what's new] course available in my city before May 8.

  Thanks in advance,

  Nikolai

  So, you have right to VCP4-VTC? (there is no secure Channel 4.1)

  You can get a new certification in many different ways, but it looks like you want to take VCP550 which will give you VCP5-VTC as well as quite a bit of your VTC VCP4.

  All you have to do before the expiration date is VCP550 (or VCP510), without training.

  Take a look at the path 2 here: (VCP5-VTC) VCP-Data Center Virtualization

• VCP 3/4/5 expires March 10 queries.

  Hello

  All my VCP is due to expire March 10 and I want to take the exam of Delta 550 this Sunday and I was wondering if it is possible that you do not visit a testing center?

  I asked my permission to Delta 6 Jan so I hope it is still topical.

  Review of VMware: Ready to annex

  
  

  Your application to the certification exam has been treated.

  Student: xxxxx

  Review: Review of Delta VCP5-VTC (VCP550D) [VCP550D]

  Candidate ID: xxxxxx

  You can now go to:

  http://www.pearsonvue.com/VMware

  to schedule your exam. Sign in using the name and ID of candidate above.

  Good luck to you on your review.

  Sincerely,

  The Certification Team technique VMware

  Thank you very much.

  Yes, the VCP550D is online and will certainly Sunday.  You can begin the exam immediately after scheduling and payment - in fact, it expires in a few days if you do not start it.

  Note If you do not pass there is a 7 day wait.  That means that you would need to program (and spend) a different review-CRS in 2 days if you fail on Sunday.

• vCenter host name does not change after upgrade to different to host

  Hello

  Yesterday I've updated vcenter server 5.0 to 5.1 in my lab environment. everything goes well, I faced some problems after the upgrade to 5.1. Below the questions I met

  1 vcenter service is stopped - solved by stopping Server vcenter 5.0, because my SQL Server must always connect to my server vcenter 5.0. Basic Upgrade to 5.1

  The host name of vcenter 5.0 is vcp.lab.com

  2 vcenter 5.1 host name is vcp5.lab.com, when I connect to vcenter server with the host name or IP address still shows the old vcp.lab.com at the top of the console to vcenter

  How to solve this kind of issue. Is there any problem with certification because I copied the secure channel to the server vcp5 Server certification.

  Go to the menu Administration-> vCenter Server settings-> the run settings and type the name of the new server vCenter on vCenter Server Name.

• MCSA or VCP for HER cooler

  Hi thanks for adding me,

  I am more fresh to the field of COMPUTING with 1 year exp in the Windows servers. I have the keen interest in the virtualization platform. I'm looking for an opportunity working on it. After having browsed a few sites, I got to know the global certification will bring added value to my profile. So now should what certification I start for my career of virtualization. Should I start with a certification of Microsoft windows server or Vmware VCP certification. Looking for an effective response to start my career.

  Thanks in advance.

  I agree with weinstein, the MCSA would certainly benefit you are considering your current experience is mainly with Windows Server.

  Although the CPV would be also great for your RESUME, I would only really recommend this offer that you have exposure to VMware in a production environment, even if exposure is minimal.