After you have installed officejet 4110 all-in-one does not open the Director icon

Similar Questions

• My HP Officejet 4630e all-in-one does not print the date and time on the fax header

  I followed all the instructions of configuration / Date and time are set correctly but only name and phone number show on the fax header when sending fax.  How can I get the date and time to print as well?

  Thank you for your help

  Hi doggynut4,

  Welcome to the HP Support forums.  I understand that you want to add the date and time to your fax header.

  Your user guide indicates that only the name and fax number can be entered for the fax header (found on page 49). I even confirmed this on my Officejet 4630.  I apologise for any inconvenience this may cause.

  User's Guide e-All-in-One Series Officejet 4630

• After you have installed windows 8 my cd rom is not working.

  After you have installed windows 8 my cd rom is not working. Why this is happening

  Most likely your drivers for the cd rom does not have go into Control Panel/System Device Manager and security for all marked devices other devices that may not have installed the drivers. Most likely, you will need to go to your manufacturers website and find the driver for your specific model, you should be able to download and install it from there.

• After you have installed Windows 10 and signature with password (Windows 7), the following screen (I guess the desktop of Windows 10) just flashes and the arrow cursor just spins.

  After you have installed Windows 10 and signature with password (Windows 7), the following screen (I guess the desktop of Windows 10) just flashes and the arrow cursor just spins.  Try to understand the problem.  Can I try to reinstall? Problem is on flashing screen cannot do anything.

  Original title: Windows 10

  Hello

  Thanks for posting in the Microsoft Community.

  (1) do the Windows 10 installation process is complete?

  (2) you are able to view the Windows 10 desktop?

  You can check the help below article and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows-10/troubleshoot-screen-flickering

  If the problem persists, you can reinstall Windows 10 by downloading an ISO image file to create installation media.

  To download an ISO image see the link below:

  https://www.Microsoft.com/en-us/software-download/Windows10

  To create an Installation media check out the link below.

  http://Windows.Microsoft.com/en-us/Windows-10/media-creation-tool-install

  It will be useful. Please get back to us with the State of the question.

  Thank you.

• I have an officejet j4580 all-in-one and I lost the cd, how do I set up my laptop?

  I have an officejet j4580 all-in-one and I lost the cd, how do I set up my laptop?

  Hey mbuyi

  Please visit the link below to download the driver full features

  HP Officejet J4580 all-in-One Printer Drivers

• C4580 all-in-one does not print the page Web of the internet explore 9 64-bit

  C4580 all-in-one does not print the page Web of the internet explore 9 64-bit

  Message: Script error...

  OK if you use IE9 32-bit

  Latest version of the driver from HPupdate

  Same problem on 2 different PC - running Win7 Home premium, another the proff of Win7, both 64-bit

  Hello borisgit,

  As you have noticed one solution is to run IE9 in 32-bit mode. You can also try running the 64-bit version of IE9 as administrator to work around this problem.

  Script error when you try to print from Internet Explorer 9

• HP officejet 9120 (all-in-one) does not No Scanner for driver problem.

   

  Mr. President is respected!

   

  I have a portable printer Hp officejet 9120 (all-in-one), but no scanner to work here for driver problem. I downloaded the driver from the Hp site, but not here.not updated driver does work on XP, win 7 please help me in this matter.

   

   

   

  Thank you

  (Munir Malik)

  Pakistan

  [email protected]

   

   

  Hello

  You might have more luck on the bussines forum, this is the forum of consumer and your unit is regarded as a bussiness unit, so bussiness forum could be a place where you get a better answer.
  Find it with the link below.

  http://h30499.www3.HP.com/

• HP officejet 5610 all-in-one does not print one when it does print a map from 2 months ago.

  Officejet 5610 all-in-one will print no one when it does print a map of 2 months ago

  Officejet 5610 all-in-one will print no one when it does print a map of 2 months ago

  Who is this?  Do not print or print the old data?

  Under what circumstances does the former print job print (for example, after restarting)?

  Follow these steps:

  Open a command prompt window (start > run > cmd > OK)

  Type the following command and press ENTER after each line:

  net stop spooler

  del "% windir%\system32\spool\PRINTERS\*.*" [Y when prompted type]

  net start spooler

  output

• HP PSC 1210 all-in-one: could not open the HP Director icon to the desktop

  I installed the CD software for this fairly old printer on my laptop Windows 10 (64-bit). Everything seems to work fine except that I can't access the HP Director. I tried to check on the resources from HP site, but it does detect not all HP products on my laptop even if the printer is plugged in and on. Also, I searched for the car and the road status update on the site of HP tools. Even if I see my printer listed on the player page, it has no download button click next to my model. I was trying to see if the drive indeed download when I installed the software.  Again I don't know even though most everything works except for no access to the HP Director. I guess that the fundamental question is whether or not this now old enough (but still very good printer) can run on Windows 10. I used it before on XP. I'd appreciate any help with any of these issues. Thanks, Peggy

  Hello

  HP Director is not intended for Windows 10.

  The original CD was made several years earlier version 10 of Windows.

  Right click on the start icon and select programs and features, and then delete any software installed client the HP of your printer.

  Install the software by following the steps below:

  http://support.HP.com/us-en/product/HP-PSC-1200-all-in-one-printer-series/90763/model/90765/document/c01796879/

  Be aware that no full functionality is available for Windows 10 since it is an older model, scan and pritn base drivers are provided by the operating system itself.

  See "I have always used the HP and the HP Toolbox Solution Center. What I use now? "in the document for more information.

  Shlomi

• my all-in-one does not launch the analysis of e-mail Wizard. This option is not supported

  Is it possible to start the wizard for analysis by email on this printer? I am able to analyze then send a page without using the wizard.

  Jim,

  Sorry for the confusion of scan to e-mail is not supported with your model... Here's one that States of the user guide.

  For scanning to e-mail, Fax E-mail

  Note:

  If you use the HP Officejet Pro 8500 a (A910a-f), you can only use the scan to

  Network and Fax folder in network folder.

• After you have installed eos solutions digital disk worm 24.1, get the error message (see below)

  I install in win7/64 and can not run one of the programs on the solutions digital eos drive worm 24.1.  I tried different resolutions on my screen, including in 1024 x 768 but end up with the same message., I get an error message as follows: "this software doesn't support screen resolution less than 1024 x 768" but my resolution is set higher! "."

  could someone please help?

  Try the last drive and see if that helps:

  http://www.USA.Canon.com/Cusa/support/consumer/eos_slr_camera_systems/eos_digital_slr_cameras/eos_1d...

• I am running Vista Home Premium (although upgrade automatic is activated, the system will not install SP1.) Support Ms called and they asked me reinstall the OS. I did and the same problem.) I have Toshiba Satellite laptop. My system does not open the

  How can I open files to .phtml?

  You will get the best help for any problem of Update/Service Pack update Vista Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the correct help it.

  See you soon. Mick Murphy - Microsoft partner

• Problem has been detected and windows has been shutdown error STOP: 0x0000008E. Get the memory dump after you have installed the trial version of MS Project 2010.__space.

  Original title: problem has been detected and windows has been shut down. Get the memory dump after you have installed the trial version of MS Project 2010.__space.

  Computer Message: Check if you have enough disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video cards.

  Check with your suppliers of material, updates the BIOS. Disable the BIOS memory options such as implementing caching or shading. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to start advance startup options, and then select Safe mode.

  Technical information: * STOP: 0x0000008E (0xC0000005, 0x8054556C, 0xADB78A98, 0x00000000)

  Beginning physical memory dump

  Total physical memory dump. Contact technical support for further assistance group.

  Hi fernandomventura,

  Step 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...) Except the keyboard and mouse and then start.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

  Step 2: Follow the steps mentioned in the articles below which deals with a similar question

   

  General troubleshooting for an error message that you receive randomly in Windows XP: "Stop 0x0000008E"-restore the system to achieve ".

  http://support.Microsoft.com/kb/945658/

  You receive a random "0x0000008E" error message on a blue screen in Windows XP

  http://support.Microsoft.com/kb/827663

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• you need to install officejet 5510 all in one on windows 7. This disc 2000, xp only

  you need to install officejet 5510 all-in-one printer in windows 7. don't have installation disk for windows 98, ME, 2000, XP.

  Hello

  Unfortunately no driver for Windows 7 on its portal site. Please, use the following instructions to do operational:

  http://support.HP.com/us-en/document/c01796879

  Kind regards.

• Pavilion dv6645us after you have installed Windows 7 ultimate x 64 no drivers for base system device

  After you have installed windows 7 ultimate on my pavilion dv6645us laptop, I can't find drivers for base system device, location: 2 PCI Bus, device 5, function 2. Also for another device of the Base system, location: 2 PCI Bus, device 5, function 3, I can't find the drivers. And I have a unknown device, location: on the system as 'good' to ACPI Microsoft. (I don't know the English translation).

  The only thing that does not work on my laptop, I noticed is that I can't write data to my external hard drive (WD essential 1 TB NTFS), I can access the drive and get the data off of it, but when I try to put my computer on the outside driving my laptop goes down (it reacts with difficulty (, all usb devices are disconnected and I have to manually restart the computer by holding down the button for 5 seconds).

  Is this a known problem and the most important is there a solution for this?

  Thanks in advance.

  Hello

  Base system device is for sure your player card.

  Use your Vista drivers for this problem:

  Ricoh 5-in-1 card reader here

  If there are problems with the excavation using compability mode. How al information here.

  How to solve other problems as unknown device?

  Go to control panel-> Device Manager control

  Click with the right button of your mouse on each yellow Panel and choose Properties. Then click on background details and paste hardware ID here. This way we will know what it is.

  Below, an example of how you do it: