After you install Oracle Clusterware 11 GR 1 material: could not start the crs stop

Similar Questions

• Could not start the desktop Vista after installing Windows Vista SP2, error: 0XC0190036.

  Original title: vista sp2 problem.

  I have a laptop that I haven't used in a while.  I took on a trip and received the message that the updates are available.  One was SP2.  After the update is complete, it failed to start with a message OXC0190036.

  Startup Repair said that he could not solve the problem.  Restoration of the system has not only restore - labeled SP1 and it allows you to finalize the restoration of files and stays there.  (I waited for 3 hours without change).
  I have a XP install disc that I used before installing Win 7 on my desktop, but it does not give me the opportunity to do an installation.
  Can enter the command prompt, I'm perplexed as to what to do.
  I want to get this laptop that works so I can give to someone who needs a faster machine.
  Thank you.
  Harold Menzel

  Hello

  XP disk will not help you to fix Vista

  As the system restore does not try a startup repair and / or a restoration of the system using a Microsoft Vista DVD

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And here are a few ways to reinstall Vista.

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Could not start the virtual machine after you use vmkfstools to resize - HELP!

  I thought I knew what I was doing, but apparently not...

  I tried to increase the size of a VM over 36 GB drive and now I can not start the server. Here's the change front of directory list:

  -rw - 1 root root 16781312 Sep 20 19:46 PJAEast-DL01-000001 - delta.vmdk

  -rw - 1 root root 325 28 August to 01:52 PJAEast-DL01 - 000001.vmdk

  -rw - 1 root root 4096 9 February 14:55 PJAEast-DL01-000002 - delta.vmdk

  -rw - 1 root root 277 9 February 14:55 PJAEast-DL01 - 000002.vmdk

  -rw - 1 root root 28201 28 August to 01:52 PJAEast-DL01 - Snapshot1.vmsn

  -rw - 1 root root 28267 9 February 14:55 PJAEast-DL01 - Snapshot2.vmsn

  -rw - 1 root root 131604480 26 August at 08:04 PJAEast-DL01 - flat hard

  -rw - 1 root root 8684 25 August at 21:03 PJAEast - DL01.nvram

  -rw - 1 root root 589 25 August at 15:18 PJAEast - DL01.vmdk

  -rw - r - r - 1 root root 1042 28 August to 01:52 PJAEast - DL01.vmsd

  -rwxr-xr-x 1 root root 2779 Feb 9 15:10 PJAEast - DL01.vmx

  -rw - r - r - 1 root root 267 Feb 9 15:10 PJAEast - DL01.vmxf

  -rw - 1 root root 9898631168 9 February 14:54 PJAEast-DL01_1-000001 - delta.vmdk

  -rw - 1 root root 331 28 August to 01:52 PJAEast-DL01_1 - 000001.vmdk

  -rw - 1 root root 73728 9 February 14:55 PJAEast-DL01_1-000002 - delta.vmdk

  -rw - 1 root root 283 9 February 14:55 PJAEast-DL01_1 - 000002.vmdk

  -rw - 1 root root 36322836480 28 August at 01:41 PJAEast-DL01_1 - flat hard

  -rw - 1 root root 597 25 August at 15:18 PJAEast - DL01_1.vmdk

  -rw - r - r - 1 root root 78710 25 August at 16:06 vmware - 1.log

  -rw - r - r - 1 root root 68108 25 August at 20:43 2.log - vmware

  -rw - r - r - 1 root root 122302 28 August at 01:41 vmware - 3.log

  -rw - r - r - 1 root root 90557 Sep 20 19:54 4.log - vmware

  -rw - r - r - 1 root root 69453 9 February 14:54 vmware.log

  Then, I run the command:

  vmkfstools x 256g PJAEast - DL01_1.vmdk

  And now the virtual machine does not start, return an error: "the virtual disk parent has been changed since the child was created."

  The directory listing is now ("BOLD" indicates the change of information post-vmkfstools):

  -rw - 1 root root 16781312 Sep 20 19:46 PJAEast-DL01-000001 - delta.vmdk

  -rw - 1 root root 325 28 August to 01:52 PJAEast-DL01 - 000001.vmdk

  -rw - 1 root root 4096 Feb 9 16:12 PJAEast-DL01-000003 - delta.vmdk

  -rw - 1 root root 277 Feb 9 16:12 PJAEast-DL01 - 000003.vmdk

  -rw - 1 root root 28201 28 August to 01:52 PJAEast-DL01 - Snapshot1.vmsn

  -rw - 1 root root 28267 9 February 14:55 PJAEast-DL01 - Snapshot2.vmsn

  -rw - 1 root root 131604480 26 August at 08:04 PJAEast-DL01 - flat hard

  -rw - 1 root root 8684 Feb 9 16:12 PJAEast - DL01.nvram

  -rw - 1 root root 589 25 August at 15:18 PJAEast - DL01.vmdk

  -rw - r - r - 1 root root 1015 28 August 01:52 PJAEast - DL01.vmsd

  -rwx - 1 root root 2779 Feb 9 16:12 PJAEast - DL01.vmx

  -rw - 1 root root 267 Feb 9 16:12 PJAEast - DL01.vmxf

  -rw - 1 root root 9898631168 9 February 14:54 PJAEast-DL01_1-000001 - delta.vmdk

  -rw - 1 root root 331 28 August to 01:52 PJAEast-DL01_1 - 000001.vmdk

  -rw - 1 root root 73728 Feb 9 16:12 PJAEast-DL01_1-000003 - delta.vmdk

  -rw - 1 root root 283 Feb 9 16:12 PJAEast-DL01_1 - 000003.vmdk

  -rw - 1 root root 274877906944 28 August 01:41 PJAEast-DL01_1 - flat hard

  -rw - 1 root root 599 9 Feb 16:11 PJAEast - DL01_1.vmdk

  -rw - r - r - 1 root root 68108 25 August at 20:43 2.log - vmware

  -rw - r - r - 1 root root 122302 28 August at 01:41 vmware - 3.log

  -rw - r - r - 1 root root 90557 Sep 20 19:54 4.log - vmware

  -rw - r - r - 1 root root 69453 9 February 14:54 5.log - vmware

  -rw - r - r - 1 root root 39510 Feb 9 16:12 6.log - vmware

  -rw - r - r - 1 root root 39411 Feb 9 16:12 vmware - 7.log

  -rw - r - r - 1 root root 39410 Feb 9 16:14 vmware.log

  I can't do anything else until I get comments. Can anyone recommend a way to solve this problem?

  I thought I knew what I was doing, but apparently not...

  I agree

  Two a problem with the new drive.

  1. You get the error message comes from the basic disk with a different size than the disks of the snapshot.
  2. With a size of 256 GB, you will not be able to create snapshots of the disk (on ESXi prior to 5.0 with a block size of 1 MB)

  What you can try to do is to edit the file PJAEast - DL01_1.vmdk :

  • 536870912 VMFS 'PJAEast-DL01_1 - flat hard' RW--> RW 70943040 VMFS 'PJAEast-DL01_1 - flat hard. "
  • DDB. Geometry.Cylinders = "33418'-> ddb.geometry.cylinders = '4416.

  After that, I would recommend to clone the virtual disk to a new one, replace the virtual disk in the virtual machine settings and resize it to a maximum of 254GB (see "calculates the time system required by the snapshot files" at http://kb.vmware.com/kb/1012384)

  • vmkfstools-i PJAEast-DL01_1 - 000003.vmdk PJAEast - DL01_1a.vmdk

  André

• DirectX on Windows 8 (64-bit) "your DirectX Runtime is up-to-date. Download and install this file from Microsoft. ""Setup could not download the file. Please try again later or check the connection to the network. »

  So I tried to get this to work at least for a day now, but whenever I try to launch my new game I'm away I kept getting this error: "your DirectX Runtime is up-to-date. Download and install this file from Microsoft. ' When I was re-directed I downloaded, it opens and clicks on agreed and all this things, but after 10 seconds initialization, it gave me this error: "Setup could not download the file. Please try again later or check the connection to the network. " I checked all that nothing seemed to be wrong, I did it again and again and again. So I just went to a solution or any news for DirectX. So far, no luck.

  I am running on DirectX 11 right now, is if there is a new DirectX or am I a jerk, and that is a different problem? I can't understand it.

  Thank you

  Hello

  Try this link... it's a complete Installer for DirectX Runtime June 2010... This is an optional package that use a lot of games...

  http://www.Microsoft.com/en-us/download/confirmation.aspx?ID=8109

  The file is self-extracting, so take note where extract you it to.

  Open the folder, and then double-click DXSETUP...

• Could not start the automatic updates. Get an error that Windows cannot check the updates, D0000034 after the failure of the Java updates

  OP: Action Center... PC problem: 1 important message

  After the failure of the attempt to install the JAVA update, I received this message from Action Center... Windows cannot check the updates. So I was taken to the dialog box and retried to check the updates of windows fails again with the code D0000034. Also did a system restore to the place before the installation of JAVA update attempt, but was no help. Can you help me?

  Hello Irfan,

  Thanks again for your response. Since your last I discovered through my system status (Control Panel), I wrote that my product ID and the Windows 7 activation status not available. So I followed instuctions to help and microsoft support to activate.  Yet once, I got the error code D0000034 as before with the problem of update. However, I was given the opportunity to phone, but received no phone #. I bought the DVD of Windows 7 and installed on the PC that was custom built for me.  On the site Web microsoft help and support, I was asked for the product ID, which according to them is a # 20 numbers.  Not the only one, I have is the product key which is one 25-alpha-numeric.  I tried to enter only and does not pass.  This is why I say that I can pay for help since I did not ' have the product ID.  Maybe it isn't your area of expertise, Irfan, but I was hoping... I re - install windows on last April when I got in trouble and probably did not re - activate? What do you think?  If you can get back on track, I would be very grateful and thank you once again to be a big help!

  wandrinstar

  Please ignore above request. I have since re-activated Windows and the problem was solved with technical assistance telephone and thank you again for your help, Irfan. Also thanks to all the people answering the phone at microsoft. The experience I had was really a pleasure. I wasn't expecting such an attitude courteous and professional.

  Keep up the good work,

  wandrinstar

• Could not start the wsm - am oracle mobile Server security

  I am unable to start wsm - am in mobile security on server. When starting omsm_server1, I got this error. Trying to start manually it did not help, the State still appears as "failed". After this manual start, I noticed the following exception in the omsm_server1 logs.

  < 20 August 2015 20:22:42 PKT > < error > < HTTP > < BEA-101216 > < Servlet: 'wsmtest.jaxws.diagnostic.Diagnostic' failed by preloading at startup in a Web application: "diagnosis."

  java.lang.NoClassDefFoundError: Sun/io/CharacterEncoding

  at oracle.j2ee.ws.common.util.TestPageUtils.encode(TestPageUtils.java:216)

  at oracle.j2ee.ws.server.management.mbeans.WebServiceOperation.createTestPagePath(WebServiceOperation.java:276)

  at oracle.j2ee.ws.server.management.mbeans.WebServiceOperation.initialize(WebServiceOperation.java:253)

  to oracle.j2ee.ws.server.management.mbeans.WebServiceOperation. < init > (WebServiceOperation.java:244)

  at oracle.j2ee.ws.server.provider.GenericProviderInterceptorPipeline.registerWebServiceOperationMBean(GenericProviderInterceptorPipeline.java:175)

  Truncated. check the log file full stacktrace

  Caused by: java.lang.ClassNotFoundException: sun.io.CharacterEncoding

  at java.net.URLClassLoader.findClass(URLClassLoader.java:381)

  at java.lang.ClassLoader.loadClass(ClassLoader.java:424)

  to Sun.misc.Launcher$appclassloader$ AppClassLoader.loadClass (Launcher.java:331)

  at java.lang.ClassLoader.loadClass(ClassLoader.java:357)

  at oracle.j2ee.ws.common.util.TestPageUtils.encode(TestPageUtils.java:216)

  Truncated. check the log file full stacktrace

  >

  < 20 August 2015 20:22:42 PKT > < error > < hats > < BEA-149231 > < cannot create the activation state to true for the application "wsm - am.

  weblogic.application.ModuleException: [HTTP:101216] Servlet: 'wsmtest.jaxws.diagnostic.Diagnostic' failed by preloading at startup in a Web application: "diagnosis."

  java.lang.NoClassDefFoundError: Sun/io/CharacterEncoding

  at oracle.j2ee.ws.common.util.TestPageUtils.encode(TestPageUtils.java:216)

  at oracle.j2ee.ws.server.management.mbeans.WebServiceOperation.createTestPagePath(WebServiceOperation.java:276)

  at oracle.j2ee.ws.server.management.mbeans.WebServiceOperation.initialize(WebServiceOperation.java:253)

  to oracle.j2ee.ws.server.management.mbeans.WebServiceOperation. < init > (WebServiceOperation.java:244)

  at oracle.j2ee.ws.server.provider.GenericProviderInterceptorPipeline.registerWebServiceOperationMBean(GenericProviderInterceptorPipeline.java:175)

  at oracle.j2ee.ws.server.provider.GenericProviderInterceptorPipeline.registerWebServiceOperationMBeans(GenericProviderInterceptorPipeline.java:250)

  at oracle.j2ee.ws.server.provider.GenericProviderInterceptorPipeline.registerWebServiceMBeans(GenericProviderInterceptorPipeline.java:161)

  to oracle.j2ee.ws.server.provider.management.AbstractProviderInterceptorPipeline. < init > (AbstractProviderInterceptorPipeline.java:130)

  to oracle.j2ee.ws.server.provider.GenericProviderInterceptorPipeline. < init > (GenericProviderInterceptorPipeline.java:103)

  at oracle.j2ee.ws.server.provider.GenericProviderPlatform.createProviderInterceptorPipeline(GenericProviderPlatform.java:211)

  at oracle.j2ee.ws.server.provider.management.ProviderInterceptorPipelineManager.createProviderInterceptorPipeline(ProviderInterceptorPipelineManager.java:101)

  at oracle.j2ee.ws.server.provider.management.ProviderInterceptorPipelineManager.createProviderInterceptorPipeline(ProviderInterceptorPipelineManager.java:80)

  at oracle.j2ee.ws.server.provider.ProviderProcessor.configureProviderManagement(ProviderProcessor.java:353)

  at oracle.j2ee.ws.server.provider.ProviderProcessor.init(ProviderProcessor.java:198)

  at oracle.j2ee.ws.server.provider.ProviderServlet.initializeProcessor(ProviderServlet.java:634)

  at oracle.j2ee.ws.server.provider.ProviderServlet.init(ProviderServlet.java:313)

  at oracle.j2ee.ws.server.provider.ProviderServlet.init(ProviderServlet.java:242)

  at javax.servlet.GenericServlet.init(GenericServlet.java:241)

  to weblogic.servlet.internal.StubSecurityHelper$ ServletInitAction.run (StubSecurityHelper.java:283)

  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)

  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)

  at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64)

  at weblogic.servlet.internal.StubLifecycleHelper.createOneInstance(StubLifecycleHelper.java:58)

  to weblogic.servlet.internal.StubLifecycleHelper. < init > (StubLifecycleHelper.java:48)

  at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:539)

  at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:1981)

  at weblogic.servlet.internal.WebAppServletContext.loadServletsOnStartup(WebAppServletContext.java:1955)

  at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1874)

  at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3154)

  at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)

  at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:484)

  to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)

  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

  at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

  at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)

  at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)

  to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)

  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

  at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

  at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)

  to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:671)

  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

  at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)

  at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)

  at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)

  at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)

  at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)

  at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)

  to weblogic.management.deploy.internal.DeploymentAdapter$ 1.doActivate(DeploymentAdapter.java:51)

  at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)

  to weblogic.management.deploy.internal.AppTransition$ 2.transitionApp(AppTransition.java:30)

  at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)

  at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)

  at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)

  at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)

  at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)

  at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)

  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

  at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

  Caused by: java.lang.ClassNotFoundException: sun.io.CharacterEncoding

  at java.net.URLClassLoader.findClass(URLClassLoader.java:381)

  at java.lang.ClassLoader.loadClass(ClassLoader.java:424)

  to Sun.misc.Launcher$appclassloader$ AppClassLoader.loadClass (Launcher.java:331)

  at java.lang.ClassLoader.loadClass(ClassLoader.java:357)

  ... more than 59

  at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1520)

  at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:484)

  to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)

  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

  at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

  Truncated. check the log file full stacktrace

  Caused by: java.lang.ClassNotFoundException: sun.io.CharacterEncoding

  at java.net.URLClassLoader.findClass(URLClassLoader.java:381)

  at java.lang.ClassLoader.loadClass(ClassLoader.java:424)

  to Sun.misc.Launcher$appclassloader$ AppClassLoader.loadClass (Launcher.java:331)

  at java.lang.ClassLoader.loadClass(ClassLoader.java:357)

  at oracle.j2ee.ws.common.util.TestPageUtils.encode(TestPageUtils.java:216)

  Truncated. check the log file full stacktrace

  >

  [EL Info]: 2015-08-20 20:22:46.724 - ServerSession (1161768496) - EclipseLink, version: Eclipse - 2.3.1.v20111018 persistence Services - r10243

  [EL Info]: 2015-08-20 20:22:46.73 - ServerSession (1161768496) - server: 10.3.6.0

  [EL Info]: 2015-08-20 20:22:47.057--ServerSession(1161768496)--zip:/home/idm_ext/idm/Middleware/user_projects/domains/oam_domain/servers/omsm_server1/tmp/_WL_user/omsm_11.1.2.3.0/7m8c9p/APP-INF/lib/msm-all.jar!/_msm_nonJtaDataSource=jdbc/omsm-ds login successful

  Here are the versions of weblogic and mobile security suite:

  WebLogic = 10.3.6

  OMSS = 11.1.2.3.0

  RCU = 11.1.1.9.0

  Anyone know or have an idea on what might be wrong here? Propose any possible resolution. Any help/suggestion will be highly appreciated.

  Thank you and best regards,

  Qasim

  Hi Qasim,

  There is a similar problem here: https://community.oracle.com/thread/3583324

  It seems related to the version of the JDK you are using WebLogic 10.3.6 does not support Java 8. See the matrix of support FMW here: http://www.oracle.com/technetwork/middleware/ias/downloads/fusion-certification-100350.html

  Kind regards

  Jaap

• Could not start the Apps level after movement Machine OS

  Hello
  
  I am Oracle EBS 12.0.4 on IBM AIX, there was activity on the side of the BONE to move the Machine. After the physical movement of the server has been started, but now the listener fails to start, the following errors were found in the journal of the listener
  
  System settings file is /u01/oracle/PROD/inst/apps/TEST_ebscl2/ora/10.1.2/network/admin/listener.ora
  Log messages written to /u01/oracle/PROD/inst/apps/TEST_ebscl2/logs/ora/10.1.2/network/apps_prod.log
  Trace information written to /u01/oracle/PROD/inst/apps/TEST_ebscl2/logs/ora/10.1.2/network/apps_prod.trc
  Trace level is currently 0
  
  Started with pid = 479272
  Error listening on: (ADDRESS = (PROTOCOL = TCP (Port = 1626))(Host=ebscl1))
  TNS-12542: TNS:address already in use
  AMT-12560: TNS:protocol adapter error
  AMT-00512: address already in use
  IBM/AIX RISC System / 6000 error: 67: address already in use
  
  Check the listener.ora, check etc/hosts, but another thing that should be checked?
  
  Any help will be appreciated.
  
  Thank you
  
  Published by: user8676543 on April 13, 2011 03:26

  Salvation;

  Please check below note that might be useful for your question:

  Listener fails to start on Linux, errors with TNS-12542, Linux error: 98: address already in use [301014.1 ID]
  Listener fails to start with TNS: Address Already in Use (TNS-12542 TNS-12560 TNS-00512) [ID 416566.1]

  Respect of
  HELIOS

• Could not start the obiee11g oracle process manager

  Hello
  
  I'm unable to start the server
  
  Console services are started and bni_server1 also started but oracle process manager is not ongoing enforcement
  
  
  Help, please
  
  Thank you
  collery

  Hello

  Reference: http://gerardnico.com/wiki/dat/obiee/system_component

  Thank you

• Could not start the server after a rowloader is attached to a table

  I'm under SQLFire 1.1.1 on Windows 7.  I use the example of JDBCRowLoader as well as the JDBC Microsoft SQL Server (sqljdbc4.jar) driver to connect to SQL Server 2008

  My process flow is:

  (1) start the locator - locator sqlf - peer-discovery-address = localhost - dir = locator1

  (2) start the server - server sqlf start - locators = localhost [10334] - bind-address = localhost-client-port = 1528 - dir = server1-classpath=C:\vFabric_SQLFire_111_b42624\lib\rowloader.jar; C:\vFabric_SQLFire_111_b42624\lib\sqljdbc4.jar

  (3) create a table-

  CREATE TABLE station

  (id int,

  title VARCHAR (500), primary key (id));

  (4) attach the table to the rowloader-

  call the SYS. () ATTACH_LOADER

  "APP."

  'post',

  "JDBCRowLoader,"

  ' | URL = jdbc:sqlserver://localhost;databaseName=DEVELOPMENT;user=rowloader;password=rowL0ader. query string = SELECT id, title FROM mission WHERE id =?') ;

  Presents all works.  I can select in the message table in the cache.  And if the id is not in the cache, it is filled with SQL Server.

  This set works fine until I have to stop and start the server.  Then, the next:

  (5) to stop the server - server stop sqlf - dir = server1

  6) Server - server sqlf start - locators = localhost [10334] - bind-address = localhost-client-port = 1528 - dir = server1-classpath=C:\vFabric_SQLFire_111_b42624\lib\rowloader.jar; C:\vFabric_SQLFire_111_b42624\lib\sqljdbc4.jar

  And here it hangs.  And it crashes only if I had already joined the rowloader to the table.  The logs show no problem.  Looks like it stops:

  [info 25/10/2013 13:42:33.103 CDT SQLF:TraceConglom < CacheServerLauncher #serverConnector > tid = 0xc] With the help of the JAVA virtual machine as a data store of SQLFire for the table [APP. POST] with table-partitioned by default = false

  [info 25/10/2013 13:42:33.128 CDT SQLF:TraceConglom < CacheServerLauncher #serverConnector > tid = 0xc] GemFireTransaction TX 2: created a conglomerate with 76 id: [table: APP.] [POST id: container (0, 76), isApplicationTable = true]

  [info 25/10/2013 13:42:33.141 CDT SQLF:TraceConglom < CacheServerLauncher #serverConnector > tid = 0xc] Created the index with a descriptor: ConglomerateDescriptor: conglomerateNumber = name 77 = uuid = heap = com.vmware.sqlfire.internal.engine.access.index.Hash1Index 6a6b410a-0141-f0ec-11cf-000000674058 2__POST__ID: (0, 77) container on the base container: [table: APP.] [POST id: container (0, 76), isApplicationTable = true] caseSensitive = indexable true = true

  [info 25/10/2013 13:42:33.145 CDT SQLF:TraceConglom < CacheServerLauncher #serverConnector > tid = 0xc] Created table 'APP '. "" POST "by UUID: 42adc10b-0141-f0ec-11cf-000000674058

  [info 25/10/2013 13:42:33.146 CDT < CacheServerLauncher #serverConnector > tid = 0xc] FabricDatabase: re-read correctly entry with sequenceId = 1

  [info 25/10/2013 13:42:33.146 CDT < CacheServerLauncher #serverConnector > tid = 0xc] FabricDatabase: from initial proofreading for entry: {QueueValue: key = 2, value=SqlfSetLoaderMessage@1c736ea (processorId = 0; processorType = 77; posDup = false; replayKey = 2; scheme = APP; table = POST implementation = JDBCRowLoader; initInfoStr = | url = jdbc:sqlserver://localhost;databaseName=DEVELOPMENT;user=rowloader;password=rowL0ader! | query string = SELECT id, title FROM mission WHERE id =?)} {[sequence: 2]}

  [info 25/10/2013 13:42:33.148 CDT < CacheServerLauncher #serverConnector > tid = 0xc] SqlfSetLoaderMessage: Execution with areas such as: SqlfSetLoaderMessage@1c736ea (processorId = 0; processorType = 77; posDup = false; replayKey = 2; scheme = APP; table = POST implementation = JDBCRowLoader; initInfoStr = | url = jdbc:sqlserver://localhost;databaseName=DEVELOPMENT;user=rowloader;password=rowL0ader! | query string = SELECT id, title FROM mission WHERE id =?)

  And then nothing else.  And the server never ends to start.  Only, it of there and does nothing.  And it happens every time if I have the charger line attached.  And it starts fine when the charger of the line has not been set previously.

  Any ideas or suggestions?

  I can provide the patch referring to Eric. Please email me at [email protected] and include your name, the name of your company as well as to the where you are using the SQLFire product (ie. assessment of POC, customer, potential customer). I will then provide you with a download site where you can remove the 1.1.1.2 fix.

• After you install Internet Explorer 9 (Beta) desktop computer does not display a date on the calendar

  Original title: after the installation of the Board explorer9 will not display calendar date

  tried to re install calendar but still no date display

  Hey flatcoat4247,

  O are you talking about the gadget?

  O also, do you mean to say the version of Internet Explorer 9 (Beta)?

  This behavior is most often observed if the XML registration is missing in the system. To resolve this issue, follow these steps:

  a. close Windows Sidebar. To do this, right-click on the Sidebar icon in the Notification area, and then click exit.

  b. open an elevated command prompt window.

  To do:

  i. click on Start > all programs.

  II. click Accessories.

  III. right click on invite and then click run as administrator.

  c. in the command prompt window, type the following command and press ENTER:

  regsvr32 msxml3.dll

  Similarly, run these commands:

  regsvr32 scrrun.dll

  regsvr32 jscript.dll

  If the registration was successful, you will see the message DllRegisterServer in succeeded to for each executed command.

  d. open Windows Sidebar (sidebar.exe) and check if the problem is resolved.

  See if it works.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• After you install firefox 32. Dowloads beta 9 is not finished.

  File download is completely, but it remains in 'downloads' with 0 kb/s speed.

  Hello gato_gris, this is a bug in the latest version 32 beta 9 which is treated in the version Release Candidate 1 that should be deployed via auto-mises to update to users of the beta tomorrow.

  a workaround for now would be to conclude Subject: config in the address bar of firefox (confirmed the message information where it appears), click somewhere on the page, and then create a new string with the name browser.safebrowsing.appRepURL and the value https://sb-ssl.google.com/safebrowsing/clientreport/download?key=%GOOGLE_API_KEY%

  for reference see the bug #1057764 (please do not post in bugs, but vote for the bug reports if you want to see fixed)

• Trying to install AOM in bridge of CP, but could not find the "Mac OS: / Library/Application Support/Adobe/Bridge CC Extensions" folder - where is it? Thank you!

  After upgrading to 10.9.2 changed Finder and I feel something is hidden - for example, I no longer seem to be able to 'GET INFO' on my hardrive... only my car and 'my documents' etc... maybe it has something to do with not being able to find the folder: Mac OS: / Library/Application Support/Adobe/Bridge CC Extensions

  Jeff... Yes. I wanted to say to mark this resolved - found another thread recommending using the FINDER-GO to-and/Library/Application Support / Adobe / Bridge CC Extensions.

  It worked easy.

  Little info would be a great addition to the AOM installation instructions.

  Thanks for asking!

• G72-B62US: could not start the system after Go Back Windows 10-7

  I had to go back to Windows 7 from Windows 10 because I couldn't get wireless adapter to work with a Wi - Fi connection.  I was at risk of ending my window a month to roll back.  After the Roll Back Windows 7 Gets an error on startup and the blue screen of death flashes.  Windows is trying to perform the Startup Repair and fails.

  The system, I cannot get Safe Mode.  As soon as I push the power button it gives me two choices - launch Startup Repair) 1 or 2) start Windows normally

  The repair utility says:

  Startup Repair cannot repair this computer automatically.

  Under the heading view problem details, he says:

  Signature of the problem:

  Problem event name: StartupRepairOffline

  Signature of the problem 01: 6.1.7600.16385

  Signature of the problem 02: 6.1.7600.16385

  Signature of the problem 03: unknown

  Signature of the 04:21200680 problem

  Signature of the problem 05: AutoFailover

  Signature of problem 06:5

  Signature of the problem 01: NoRootCause

  The system version: 6.1.7600.2.0.0.256.1

  Locale ID: 1033

  Once I close this window I'm in HP Recovery Manager.  It gives me one of the following options:

  Microsoft System Restore - there is no restore point

  System recovery - it says to restore your computer to out-of-box state

  Reduced Image Recovery - having said that to restore your computer to a Windows clean, the software with minimal and drivers

  So now I'm dead.

  What can be done for me other that start over completely with a cost of Windows 7?

  Unfortunately, the Win10 GoBack function is showing himself to be unreliable, because you're not the only one to declare that use it has left their machine unusable - same thing happened to me and I had to restore my laptop HP recovery HP media.

  You can try following the steps in the post of recovery HP Win7., but my experience has been that the upgrade of Win10 corrupt recovery by-product information: HP PCs - performing a recovery of system HP (Windows 7) | HP® customer support

  If this does not work, you look at using HP recovery media: HP PCs - getting HP discs recovery or a USB HP recovery disc | HP® customer support

• Want H8-1534: could not start HP Envy H8-1534 pc after Windows update 10, 1607

  Windows 10 has made automatically update 1607 (KB3176936) on the pc of my wife (HP Envy H8-1534) about 6 days ago. Since then I could not start the pc the first time I turn it on.

  When I hit the power button on the monitor lights up with the HP logo on black screen as usual but the loading icon (spinning points) does not start. Fans start, but there is no activity on the Tower in the way of flashing lights or beep sounds. If I turned off the pc by using the power button, wait 10 seconds and turn on again, the pc will start up as normal. So far, for the last 6 days, it took the 2nd attempt so that it starts the pc every time. It almost seems as if there are not able to go to the system except for the fans in this first attempt to start.

  I ran a test at startup by pressing the F2 key without no problems found. I disabled the SATA power management in the BIOS. I ran the Windows startup with no result repair. Here are the results of the txt file.

  I researched all the possibilities. I fear that this could begin to worsen. Any help will be appreciated.

  Name: Target OS Test
  Result: Completed successfully. Error code = 0 x 0
  Time taken = 265 ms
  The test is performed:
  ---------------------------
  Name: Checking content Volume
  Result: Completed successfully. Error code = 0 x 0
  Setting time = ms 2391
  The test is performed:
  ---------------------------
  Name: Diagnostic Boot manager
  Result: Completed successfully. Error code = 0 x 0
  Time taken = 63 ms
  The test is performed:
  ---------------------------
  Name: Diagnosis of the system startup log
  Result: Completed successfully. Error code = 0 x 0
  Time = 0 ms
  The test is performed:
  ---------------------------
  Name: event log diagnosis
  Result: Completed successfully. Error code = 0 x 0
  Time taken = 62 ms
  The test is performed:
  ---------------------------
  Rated: Internal audit of State
  Result: Completed successfully. Error code = 0 x 0
  Time = 0 ms
  The test is performed:
  ---------------------------
  Name: Start-up condition Test
  Result: Completed successfully. Error code = 0 x 0
  Time taken = 31 ms
  Root cause found:
  ---------------------------
  State the start indicates that the OS booted successfully.
  ---------------------------
  ---------------------------

  DBHPENVY,

  I turned off quickly startup on the pc and until now he started first try twice. I'll let you know how it does after a few days of testing.

  I read everything it does and it is perfectly logical, how it might affect our pc is the way. Go to this link and read about it and see if she could help. I thought I had turned off fast start already, but after an update he might have gotten turned on.

  Here is the link: http://www.tenforums.com/tutorials/4189-fast-startup-turn-off-windows-10-a.html

• Extend the server TCP - could not start Service - Oracle coherence GE 3.5.2/463

  Hello
  We are about to go into production I see was able to start the TCP Service extend the server (disable storage node).
  
  Concerning
  DOCUMENTATION
  
  My gaze of Configuration as follows
  <? XML version = "1.0" encoding = "windows-1252"? >
  <! SYSTEM cache-config DOCTYPE "cache - config.dtd" >
  <>cache-config
  < cache-system-mapping >
  < / cache-system-mapping >
  <>- cached patterns
  < distributed plan >
  < scheme name > distributedCache < / system-name >
  < service name > distributedCache < / service-name >
  < support-map-plan >
  < local plan >
  HYBRID of <-eviction strategy > < / eviction strategy >
  < high-units > 500 < / high units >
  < bass-units > 375 < / bass-units >
  < Unit Calculator > BINARY < / Unit-Calculator >
  <-> 1048576 uniting factor < / unit factor >
  < / local plan >
  < / support-map-plan >
  < / distributed plan >
  < proxy-system >
  < service name > ExtendTcpProxyService < / service-name >
  < number > 15 threads < / thread count >
  < Acceptor-config >
  <>tcp-Acceptor
  < address - >
  < system-property address = "proxy.listen.address" >... < / address >
  < port system-property = "proxy.listen.port" >... < / port >
  < / local-address >
  < / tcp-Acceptor >
  < / Acceptor-config >
  < autostart > true < / autostart >
  < / proxy-system >
  < / cache-plans >
  < / cache-config >
  
  - And the journal looks like this-
  
  2009-12-04 16:21:54.056/25821.278 Oracle coherence GE 3.5.2/463 < D6 > (thread = Proxy: ExtendTcpProxyService:TcpAcceptor, Member = 12): closed: Channel (Id = 193159068
  6, open = false)
  2009-12-04 16:21:54.058/25821.280 Oracle coherence GE 3.5.2/463 < D5 > (thread = Proxy: ExtendTcpProxyService:TcpAcceptorWorker:4, Member = 12): repeat SizeReques
  t due to the redistribution of PartitionSet {220, 221, 222, 223, 224, 225, 226, 227, 228, 229, 230, 231, 232, 233, 234, 235, 236, 237, 238, 239, 240, 241, 242
  243, 244, 245, 246, 247, 248, 249, 250, 251, 252, 253, 254, 255, 256}
  2009-12-04 16:21:54.058/25821.280 Oracle coherence GE 3.5.2/463 < D5 > (thread = Proxy: ExtendTcpProxyService:TcpAcceptorWorker:12, Member = 12): repeat SizeReque
  St due to the redistribution of PartitionSet {220, 221, 222, 223, 224, 225, 226, 227, 228, 229, 230, 231, 232, 233, 234, 235, 236, 237, 238, 239, 240, 241, 24
  2, 243, 244, 245, 246, 247, 248, 249, 250, 251, 252, 253, 254, 255, 256}
  2009-12-04 16:21:54.058/25821.280 Oracle coherence GE 3.5.2/463 < D5 > (thread = Proxy: ExtendTcpProxyService:TcpAcceptorWorker:11, Member = 12): repeat SizeReque
  St due to the redistribution of PartitionSet {220, 221, 222, 223, 224, 225, 226, 227, 228, 229, 230, 231, 232, 233, 234, 235, 236, 237, 238, 239, 240, 241, 24
  2, 243, 244, 245, 246, 247, 248, 249, 250, 251, 252, 253, 254, 255, 256}
  2009-12-04 16:21:54.058/25821.280 Oracle coherence GE 3.5.2/463 < D5 > (thread = Proxy: ExtendTcpProxyService:TcpAcceptorWorker:7, Member = 12): repeat SizeReques
  t due to the redistribution of PartitionSet {220, 221, 222, 223, 224, 225, 226, 227, 228, 229, 230, 231, 232, 233, 234, 235, 236, 237, 238, 239, 240, 241, 242
  243, 244, 245, 246, 247, 248, 249, 250, 251, 252, 253, 254, 255, 256}
  2009-12-04 16:21:54.175/25821.397 Oracle coherence GE 3.5.2/463 < D5 > (thread = Proxy: ExtendTcpProxyService:TcpAcceptorWorker:10, Member = 12): an exception encountered
  Ed during the processing of a SizeRequest for Service = Proxy: ExtendTcpProxyService:TcpAcceptor: java.lang.InterruptedException (Wrapped)
  at com.tangosol.util.Base.ensureRuntimeException(Base.java:293)
  at com.tangosol.util.Base.ensureRuntimeException(Base.java:269)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ BinaryMap.waitForPartitionRedistribution (DistributedCache
  . CDB:107)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ BinaryMap.waitForRedistribution (DistributedCache.CDB:34)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ BinaryMap.ensureRequestTarget (DistributedCache.CDB:15)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ BinaryMap.sendPartitionedRequest (DistributedCache.CDB:31)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ BinaryMap.size (DistributedCache.CDB:13)
  to com.tangosol.util.ConverterCollections$ ConverterMap.size (ConverterCollections.java:1470)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ ViewMap.size (DistributedCache.CDB:1)
  at com.tangosol.coherence.component.util.SafeNamedCache.size(SafeNamedCache.CDB:1)
  at com.tangosol.coherence.component.util.collections.WrapperMap.size(WrapperMap.CDB:1)
  to com.tangosol.coherence.component.net.extend.messageFactory.NamedCacheFactory$ SizeRequest.onRun (NamedCacheFactory.CDB:7)
  at com.tangosol.coherence.component.net.extend.message.Request.run(Request.CDB:4)
  at com.tangosol.coherence.component.net.extend.proxy.NamedCacheProxy.onMessage(NamedCacheProxy.CDB:11)
  at com.tangosol.coherence.component.net.extend.Channel.execute(Channel.CDB:28)
  at com.tangosol.coherence.component.net.extend.Channel.receive(Channel.CDB:26)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.Peer$ DaemonPool$ WrapperTask.run (Peer.CDB:9)
  to com.tangosol.coherence.component.util.DaemonPool$ WrapperTask.run (DaemonPool.CDB:32)
  to com.tangosol.coherence.component.util.DaemonPool$ Daemon.onNotify (DaemonPool.CDB:63)
  at com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
  at java.lang.Thread.run(Thread.java:619)
  Caused by: java.lang.InterruptedException
  at java.lang.Object.wait (Native Method)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ BinaryMap.waitForPartitionRedistribution (DistributedCache
  . CDB:96)
  ... 18 more
  
  2009-12-04 16:21:54.175/25821.397 Oracle coherence GE 3.5.2/463 < D5 > (thread = Proxy: ExtendTcpProxyService:TcpAcceptorWorker:9, Member = 12): an Unknown exception
  d when processing a SizeRequest for Service = Proxy: ExtendTcpProxyService:TcpAcceptor: java.lang.InterruptedException (Wrapped)
  at com.tangosol.util.Base.ensureRuntimeException(Base.java:293)
  at com.tangosol.util.Base.ensureRuntimeException(Base.java:269)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ BinaryMap.waitForPartitionRedistribution (DistributedCache
  . CDB:107)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ BinaryMap.waitForRedistribution (DistributedCache.CDB:34)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ BinaryMap.ensureRequestTarget (DistributedCache.CDB:15)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ BinaryMap.sendPartitionedRequest (DistributedCache.CDB:31)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ BinaryMap.size (DistributedCache.CDB:13)
  to com.tangosol.util.ConverterCollections$ ConverterMap.size (ConverterCollections.java:1470)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ ViewMap.size (DistributedCache.CDB:1)
  at com.tangosol.coherence.component.util.SafeNamedCache.size(SafeNamedCache.CDB:1)
  at com.tangosol.coherence.component.util.collections.WrapperMap.size(WrapperMap.CDB:1)
  to com.tangosol.coherence.component.net.extend.messageFactory.NamedCacheFactory$ SizeRequest.onRun (NamedCacheFactory.CDB:7)
  at com.tangosol.coherence.component.net.extend.message.Request.run(Request.CDB:4)
  at com.tangosol.coherence.component.net.extend.proxy.NamedCacheProxy.onMessage(NamedCacheProxy.CDB:11)
  at com.tangosol.coherence.component.net.extend.Channel.execute(Channel.CDB:28)
  at com.tangosol.coherence.component.net.extend.Channel.receive(Channel.CDB:26)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.Peer$ DaemonPool$ WrapperTask.run (Peer.CDB:9)
  to com.tangosol.coherence.component.util.DaemonPool$ WrapperTask.run (DaemonPool.CDB:32)
  to com.tangosol.coherence.component.util.DaemonPool$ Daemon.onNotify (DaemonPool.CDB:63)
  at com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
  at java.lang.Thread.run(Thread.java:619)
  Caused by: java.lang.InterruptedException
  at java.lang.Object.wait (Native Method)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ BinaryMap.waitForPartitionRedistribution (DistributedCache
  . CDB:96)
  ... 18 more
  
  2009-12-04 16:21:54.175/25821.397 Oracle coherence GE 3.5.2/463 < D5 > (thread = Proxy: ExtendTcpProxyService:TcpAcceptorWorker:13, Member = 12): an exception encountered
  Ed during the processing of a SizeRequest for Service = Proxy: ExtendTcpProxyService:TcpAcceptor: java.lang.InterruptedException (Wrapped)
  at com.tangosol.util.Base.ensureRuntimeException(Base.java:293)
  at com.tangosol.util.Base.ensureRuntimeException(Base.java:269)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ BinaryMap.waitForPartitionRedistribution (DistributedCache
  . CDB:107)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ BinaryMap.waitForRedistribution (DistributedCache.CDB:34)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ BinaryMap.ensureRequestTarget (DistributedCache.CDB:15)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ BinaryMap.sendPartitionedRequest (DistributedCache.CDB:31)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ BinaryMap.size (DistributedCache.CDB:13)
  to com.tangosol.util.ConverterCollections$ ConverterMap.size (ConverterCollections.java:1470)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ ViewMap.size (DistributedCache.CDB:1)
  at com.tangosol.coherence.component.util.SafeNamedCache.size(SafeNamedCache.CDB:1)
  at com.tangosol.coherence.component.util.collections.WrapperMap.size(WrapperMap.CDB:1)
  to com.tangosol.coherence.component.net.extend.messageFactory.NamedCacheFactory$ SizeRequest.onRun (NamedCacheFactory.CDB:7)
  at com.tangosol.coherence.component.net.extend.message.Request.run(Request.CDB:4)
  at com.tangosol.coherence.component.net.extend.proxy.NamedCacheProxy.onMessage(NamedCacheProxy.CDB:11)
  at com.tangosol.coherence.component.net.extend.Channel.execute(Channel.CDB:28)
  at com.tangosol.coherence.component.net.extend.Channel.receive(Channel.CDB:26)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.Peer$ DaemonPool$ WrapperTask.run (Peer.CDB:9)
  to com.tangosol.coherence.component.util.DaemonPool$ WrapperTask.run (DaemonPool.CDB:32)
  to com.tangosol.coherence.component.util.DaemonPool$ Daemon.onNotify (DaemonPool.CDB:63)
  at com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
  at java.lang.Thread.run(Thread.java:619)
  Caused by: java.lang.InterruptedException
  at java.lang.Object.wait (Native Method)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ BinaryMap.waitForPartitionRedistribution (DistributedCache
  . CDB:96)
  ... 18 more
  
  2009-12-04 16:21:54.175/25821.397 Oracle coherence GE 3.5.2/463 < D5 > (thread = Proxy: ExtendTcpProxyService:TcpAcceptorWorker:11, Member = 12): an exception encountered
  Ed during the processing of a SizeRequest for Service = Proxy: ExtendTcpProxyService:TcpAcceptor: java.lang.InterruptedException (Wrapped)
  at com.tangosol.util.Base.ensureRuntimeException(Base.java:293)
  at com.tangosol.util.Base.ensureRuntimeException(Base.java:269)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ BinaryMap.waitForPartitionRedistribution (DistributedCache
  . CDB:107)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ BinaryMap.waitForRedistribution (DistributedCache.CDB:34)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ BinaryMap.ensureRequestTarget (DistributedCache.CDB:15)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ BinaryMap.sendPartitionedRequest (DistributedCache.CDB:31)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ BinaryMap.size (DistributedCache.CDB:13)
  to com.tangosol.util.ConverterCollections$ ConverterMap.size (ConverterCollections.java:1470)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ ViewMap.size (DistributedCache.CDB:1)
  at com.tangosol.coherence.component.util.SafeNamedCache.size(SafeNamedCache.CDB:1)
  at com.tangosol.coherence.component.util.collections.WrapperMap.size(WrapperMap.CDB:1)
  to com.tangosol.coherence.component.net.extend.messageFactory.NamedCacheFactory$ SizeRequest.onRun (NamedCacheFactory.CDB:7)
  at com.tangosol.coherence.component.net.extend.message.Request.run(Request.CDB:4)
  at com.tangosol.coherence.component.net.extend.proxy.NamedCacheProxy.onMessage(NamedCacheProxy.CDB:11)
  at com.tangosol.coherence.component.net.extend.Channel.execute(Channel.CDB:28)
  at com.tangosol.coherence.component.net.extend.Channel.receive(Channel.CDB:26)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.Peer$ DaemonPool$ WrapperTask.run (Peer.CDB:9)
  to com.tangosol.coherence.component.util.DaemonPool$ WrapperTask.run (DaemonPool.CDB:32)
  to com.tangosol.coherence.component.util.DaemonPool$ Daemon.onNotify (DaemonPool.CDB:63)
  at com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
  at java.lang.Thread.run(Thread.java:619)
  Caused by: java.lang.InterruptedException
  at java.lang.Object.wait (Native Method)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ BinaryMap.waitForPartitionRedistribution (DistributedCache
  . CDB:96)
  ... 18 more
  
  2009-12-04 16:21:54.175/25821.397 Oracle coherence GE 3.5.2/463 < D5 > (thread = Proxy: ExtendTcpProxyService:TcpAcceptorWorker:2, Member = 12): an Unknown exception
  d when processing a SizeRequest for Service = Proxy: ExtendTcpProxyService:TcpAcceptor: java.lang.InterruptedException (Wrapped)
  at com.tangosol.util.Base.ensureRuntimeException(Base.java:293)
  at com.tangosol.util.Base.ensureRuntimeException(Base.java:269)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ BinaryMap.waitForPartitionRedistribution (DistributedCache
  . CDB:107)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ BinaryMap.waitForRedistribution (DistributedCache.CDB:34)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ BinaryMap.ensureRequestTarget (DistributedCache.CDB:15)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ BinaryMap.sendPartitionedRequest (DistributedCache.CDB:31)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ BinaryMap.size (DistributedCache.CDB:13)
  to com.tangosol.util.ConverterCollections$ ConverterMap.size (ConverterCollections.java:1470)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ ViewMap.size (DistributedCache.CDB:1)
  at com.tangosol.coherence.component.util.SafeNamedCache.size(SafeNamedCache.CDB:1)
  at com.tangosol.coherence.component.util.collections.WrapperMap.size(WrapperMap.CDB:1)
  to com.tangosol.coherence.component.net.extend.messageFactory.NamedCacheFactory$ SizeRequest.onRun (NamedCacheFactory.CDB:7)
  at com.tangosol.coherence.component.net.extend.message.Request.run(Request.CDB:4)
  at com.tangosol.coherence.component.net.extend.proxy.NamedCacheProxy.onMessage(NamedCacheProxy.CDB:11)
  at com.tangosol.coherence.component.net.extend.Channel.execute(Channel.CDB:28)
  at com.tangosol.coherence.component.net.extend.Channel.receive(Channel.CDB:26)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.Peer$ DaemonPool$ WrapperTask.run (Peer.CDB:9)
  to com.tangosol.coherence.component.util.DaemonPool$ WrapperTask.run (DaemonPool.CDB:32)
  to com.tangosol.coherence.component.util.DaemonPool$ Daemon.onNotify (DaemonPool.CDB:63)
  at com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
  at java.lang.Thread.run(Thread.java:619)
  Caused by: java.lang.InterruptedException
  at java.lang.Object.wait (Native Method)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ BinaryMap.waitForPartitionRedistribution (DistributedCache
  . CDB:96)
  ... 18 more
  
  2009-12-04 16:21:54.176/25821.398 Oracle coherence GE 3.5.2/463 < D5 > (thread = Proxy: ExtendTcpProxyService:TcpAcceptorWorker:6, Member = 12): an Unknown exception
  d when processing a SizeRequest for Service = Proxy: ExtendTcpProxyService:TcpAcceptor: java.lang.InterruptedException (Wrapped)
  at com.tangosol.util.Base.ensureRuntimeException(Base.java:293)
  at com.tangosol.util.Base.ensureRuntimeException(Base.java:269)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ BinaryMap.waitForPartitionRedistribution (DistributedCache
  . CDB:107)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ BinaryMap.waitForRedistribution (DistributedCache.CDB:34)
  :$
  2009-12-04 16:21:54.259/25821.481 Oracle coherence GE 3.5.2/463 < D4 > (thread = Proxy: ExtendTcpProxyService:TcpAcceptorWorker:8, Member = 12): demon caught a unh
  andled exception (com.tangosol.net.messaging.ConnectionException: channel is closed) on the way out.
  2009-12-04 16:21:54.264/25821.486 Oracle coherence GE 3.5.2/463 < D4 > (thread = Proxy: ExtendTcpProxyService:TcpAcceptorWorker:3, Member = 12): demon caught a unh
  andled exception (com.tangosol.net.messaging.ConnectionException: channel is closed) on the way out.
  2009-12-04 16:21:54.330/25821.552 Oracle coherence GE 3.5.2/463 < D5 > (thread = Proxy: ExtendTcpProxyService:TcpAcceptor, Member = 12): stop: TcpAcceptor {Name = Pr
  Oxy: ExtendTcpProxyService:TcpAcceptor, State = (SERVICE_STOPPED), ThreadCount = 0, Codec = Codec (Format = POF), PingInterval = 0, = 0 PingTimeout RequestTimeout = 0, Local
  Address=[nybc94lxb01/10.12.101.81:21005], LocalAddressReusable = false, KeepAliveEnabled = true, TcpDelayEnabled = false, ReceiveBufferSize = 0, SendBufferSize = 0, Lily
  tenBacklog = 0, LingerTimeout = 1, BufferPoolIn = BufferPool (BufferSize = 2KB, BufferType = DIRECT, capacity = unlimited), BufferPoolOut = BufferPool (BufferSize = 2KB, Buffe
  rType = DIRECT, capacity = unlimited)}
  Exception in thread "Thread-2" java.lang.RuntimeException: could not start the Service "Proxy: ExtendTcpProxyService:TcpAcceptor ' (ServiceState = SERVICE_STOPPED)
  at com.tangosol.coherence.component.util.daemon.queueProcessor.Service.waitAcceptingClients(Service.CDB:12)
  at com.tangosol.coherence.component.net.extend.Channel.request(Channel.CDB:10)
  at com.tangosol.coherence.component.net.extend.Channel.request(Channel.CDB:1)
  at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Peer.closeChannel(Peer.CDB:18)
  at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Peer.closeChannel(Peer.CDB:1)
  at com.tangosol.coherence.component.net.extend.Channel.close(Channel.CDB:20)
  at com.tangosol.coherence.component.net.extend.Channel.close(Channel.CDB:1)
  at com.tangosol.coherence.component.net.extend.proxy.NamedCacheProxy.run(NamedCacheProxy.CDB:30)
  at java.lang.Thread.run(Thread.java:619)
  Exception in thread "Thread-3" java.lang.RuntimeException: could not start the Service "Proxy: ExtendTcpProxyService:TcpAcceptor ' (ServiceState = SERVICE_STOPPED)
  at com.tangosol.coherence.component.util.daemon.queueProcessor.Service.waitAcceptingClients(Service.CDB:12)
  at com.tangosol.coherence.component.net.extend.Channel.request(Channel.CDB:10)
  at com.tangosol.coherence.component.net.extend.Channel.request(Channel.CDB:1)
  at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Peer.closeChannel(Peer.CDB:18)
  at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Peer.closeChannel(Peer.CDB:1)
  at com.tangosol.coherence.component.net.extend.Channel.close(Channel.CDB:20)
  at com.tangosol.coherence.component.net.extend.Channel.close(Channel.CDB:1)
  at com.tangosol.coherence.component.net.extend.proxy.NamedCacheProxy.run(NamedCacheProxy.CDB:30)
  at java.lang.Thread.run(Thread.java:619)
  
  Published by: Anand Gupta on December 4, 2009 17:10

  There is also a property of system specific timeout set for the guardian for proxies:-Dtangosol.coherence.proxy.guard.timeout or you can change it in the configuration of the proxy service.

  Kind regards

  David