AG3-605 connectors HDMI

Similar Questions

• AG3-605-UR1C supports a second internal hard drive?

  I would add a second internal hard drive of my AG3-605-UR1C. Is this possible?

  If it's important, the player that I'm considering is Seagate Desktop HDDSATA.

  Thanks in advance for the answer.

  your PC has 4 SATA ports on the motherboard, so if you have 1 HDD and 1DVD, you have 2 spare SATA ports to be used, and there is too much room on the chassis.

• adding ram to the Acer Predator AG3-605-UR1D

  I recently bought Acer Predator AG3-605-UR1D.

  I was wondering if its possible to add an another ram (MemoryStick) inside. I know how to do this, I wanted to just make sure that the pc would leave me without breaking something.

  
  

• I am interested in the predator AG3-605-UR1H. I have a few questions about it.

  My first question is whether it is possible to buy this model without the graphics card in it. I have a friend who has the same graphics card on his pc and is willing to sell me half price he can pass to a better graphics card.

  My second question is he the same motherboard as the fact of this model: http://us.acer.com/ac/en/US/content/model/DT.SPXAA.022 I would like to know because I think that a few years on the road, I would upgrade to the graphics card.

  I was also interested in this model: http://us.acer.com/ac/en/US/content/model/DT.SPXAA.017

  Why is not available for online purchase? It will be available in the near future?

  inspectorlunge,

  Good questions, let's see if we can get good answers.

  The units in question:

  AG3-605-UR11 / DT. SPXAA.022

  AG3-605-UR1H / DT. SPXAA.021

  AG3-605-UR2F / DT. SPXAA.017

  All our AG3-605 series models come with an adapter installed in them. If you find one of our units that use the same video card you want to get your friend you could use the two together, your overall experience growing.

  Insofar as the same motherboard, Yes, the card mother in all three are the same.

  We have a unit AG3-605 on our Acer store for purchase, Predator G-AG3 - 605 - UR1H Gaming Desktop, if it's where you were looking.

• Acer Predator AG3-605 case fans?

  Hello, I saw that the predator AG3-605 does not come with box fans, but has the slots for them, I just wanted to know what size fan do I need for the side and rear of the case.

  Saniro,

  You made a good observation, but the system is designed for energy efficiency and the optimal use of the way in which it has been designed from the factory. I just found a location for a system fan and it's backward. Looks like it can accommodate 80mm or 120mm fan, but I'm not sure that these specifications are not included because it was not designed with the idea of using or needing the extra airflow.

• AG3-605: CPU cooler for the cpu: which?

  As I am closed for rebuild my AG3-605 with a new motherboard (the same as the damaged), I want to try a new CPU cooler.

  It's not easy to find one. Noctua NH - L12 seems to be one that can fill my reconstruction. But I'm not so geeky that you might believe and confirmation of my choice would be great. It is up to you! And thank you!

  Hi jaclou,

  I am pleased to learn that you have purchased a new MB. Delay was pretty quick.

  I tried to replace my old office by another brand fans.

  Unfortunately, the management of speeds was wrong question so heat. The thermal module or the smart fan is set for fans of the original (speed / voltage / PWM %).

  We have only two options: full or restricted speed.

  For example radiator fan speed: 4200 ~ 4500 rpm and fan speed: 2200 ~ 2500 RPM.

  I tried to manage the different speeds with Speedfan, but after a few days I noticed that the bios was "troubled."

  Well, I ordered original Sunon fans.

  Question:

  You already have a case fan?

• Predator AG3-605-UR1D - Bay Swap Easy?

  I just bought the predator AG3-605-UR1D.  I saw that he has what they call an Easy Swap Bay in front - it has an orange button on it and I understand that you can put a hard drive in there for the extra space.  I have a hard drive and ready to go, but I'm unable to get the Bay Easy Swap out.

  I read that its as simple as pushing the orange button and pulling on it, but I can't seem to break away.  I noticed a screw on the left side of the Bay - what I should it unscrew out of the Bay?

  Any help would be great!

  I solved the problem!  The screw is indeed the reason why it was not opening of the Bay.  For all users with this chassis, you will need a torx screwdriver, unscrew.

• AG3 605 UR1D GTX 970

  I recently bought the 4 GB Zotac GTX 970 version.

  I own the 605-UR1D, with a power of 500w. However, it is said 484 max on feeding. I was running the graphics card very well, until I checked the tempature. Initially, the tempature of graphics card went up only - it reached a maximum of 90 degrees centigrade if I remember.

  After a few minutes, the processor and card mother MeltMC began rapidly rising. It was 68 degrees centigrade - he could high, but I don't remember.

  I heard that it is generally OK for most computers to perform at these MeltMC, but I'm not sure on the 605-UR1D

  If I can get help before I decide to return in the coming days, would be great.

  The air must be pushed outside the case.

• Connectors HDMI, DVI and DisplayPort on the video card, do I need a special DP to DVI connector?

  HPE H8 1280t HDMI, DVI and DisplayPort on the graphics card.  I want to connect 3 monitors HP,

  1 do I need a DisplayPort to DVI cable do

  2. do I need a special DP to DVI cable, or will be a lot of work.

  3. is there another way to do it?

  Hello

  DP and DVI ports using digital signals, no conversion needed, so you only need something like one of them:

  http://www.shopbot.com.au/DisplayPort-to-DVI-cable/price/Australia/320660

  Kind regards.

• I AG3-605-UR1G will be this card fit in?

  750Ti SC 2 GB GTX if will not work what decent card? I have a 500w PSU

  Hi MrProg,

  Acer doesn't support or quantify upgrades part 3. That said, personally, I'd wait the GTX 750Ti to adapt and work very well. You can find specifications of NVIDIA products on there Web site. Here is the 750Ti: http://www.geforce.com/hardware/desktop-gpus/geforce-gtx-750-ti/specifications

  Hope this helps,

  Cory

• Help upgrade gpu Ag3-605

  Hello, I'm upgrading of 745 Gtx and I don't know how to remove the rear shields for ports on the gpu. Just use force?

  Ok. If you just need to break the shield welding points with a screwdriver. I know that's not easy, but it's the only way.

• How correctly to install RAM in my Acer Predator AG3-605-UR2F

  I have to get out the existing 8 GB of ram that it comes with? I have to do something for the operating system so that it recognizes the new ram once I install it? (Beginner)

  to take on the original of the ram, it depends on how much ram you need.

  8GB is a good amount, but if you wanto to raise 16 GB and your Predator has only 2 RAM sticks, you can add a different RAM sticks 2 without removing the original ram but sticks

  2 new RAM sticks must be exactly the same as the original or you will face a lot of questions.

  If you want to raise up to 32 GB of ram, you can buy 4 8 GB ram sticks, so take off the original.

  On the OS, there is no problem, the program will automatically configure at least if BIOS recognizes the right amount of ram installed.

  It's the list of replacement ram OEM:

  

• iPad 02:30 connectors do not work after update 9.31

  Hello iPad users,.

  My iPad 2 with retina display (iPad 3) a 30 port pins.

  So far, the camera 30 connection kit pins and connectors HDMI worked through all the updates IOS since 2012.

  After the IOS version 9,31 update, I get a message telling me that "this iPad does not support this device.

  Can't wait for that Apple fix this, I won't hold my breath, as it is an old model and the port of Lightning has been around for a while.

  Any idea to work around this issue?

  Thank you.

  If the connectors are original or certified of MFi Apple products - I just unplug them - wait a bit and re connect

  It sometimes happens to me with the connector provided with the iPhone 5 that we use on our later machines

  A break in its use usually causes the indicator recede to the background

• What screen resolution will be an early 2008 iMac support HDMI Firewire?

  The question, says it all really. I have an iMac in early 2008 with Firewire ports. I have a firewire connector HDMI I want to use to connect to a monitor to use as a secondary monitor to the iMac as a monitor for the PS3. I have a different HDMI to allow switch box outputs switch between the iMac & PS3.

  I want to know is what is the maximum resolution that will support the iMac?

  And, if I use a monitor with a higher resolution it will reduce or will it just not work?

  Thanks in advance.

  I'm not sure I understand exactly what you're asking.

  Ask yourself if the iMac in early 2008 can be used as a stand-alone monitor? No-> use your iMac as a display with the target - Apple Support Display Mode

  Ask yourself if you can connect your iMac in early 2008 to an external monitor? Yes, but your iMac has an output mini-DVI video. If your monitor has an HDMI input, you will need to use one adapter mini DVI to HDMI.

• Satellite A200-1AX: how to connect to the TV HDMI port

  Hello

  I'm owner A200-1AX (PSAE6E) computer laptop with ATI Mobility Radeon HD 2600. The video card is supported hardware high-definition audio and video, but it has connector HDMI No.. I want to know, if there is any way to connect to the laptop to the HDMI in on the TV?

  Thank you!

  No way dude you can't connect the laptop to HD TV if the laptop doesn't supports HDMI port.

  Some series of laptops Toshiba as P200, X 200, G40, etc. are supported the port HDMI but not an A200

  Good bye