Again the group lacks a restart RAC instance

Similar Questions

• When I start my laptop, it is said that updates are installed. A few minutes later, my laptop restarts, and again the same message. then restarts again and again. I can not connect. What should I do?

  I have no floppy drive installation or recovery CD. When it restarts, updates are always 0% complete. I tried the system restore, but it just says that his race, but the problem remains. When I try to go to safe mode, the problem persists and I can not log on because it restarts.

  Hi SusanaVelazquez,

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you run Start up repair using WINRE (Windows recovery environment). To start WINRE and run Startup Repair on your system follow the article below:

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

   

  Method 2: You can also try to run the restore from WINRE (Windows Recovery Environment) system.

  If you want to restore the system to WINRE (Windows Recovery Environment) start WINRE and then select System Restore.

  You can also refer to the article provided below for more information on the options of WINRE (Windows Recovery Environment) in Windows Vista:

   

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  It will be useful. Please let us know to get help.

• again the group still active or current newspaper

  Hello
  on 11 G on Win 2008 R2, I try ro drop a redolog group but it is always CURRENT or ACTIVE. I alter system switch logfile several times, but it does not become idle.
  
  Any idea?
  
  Thank you.

  user522961 wrote:
  Hello
  on 11 G on Win 2008 R2, I try ro drop a redolog group but it is always CURRENT or ACTIVE. I alter system switch logfile several times, but it does not become idle.

  Any idea?

  Thank you.

  Use

  ALTER SYSTEM CHECKPOINT;
  

• Clients unable to connect due to the ORA - 12545 Intermittent in RAC environment

  We deal with this problem.
  Whenever we connect customer oracle application to our database server.
  ounces it connect and the next moment, it shows the error ORA-12545: Connect failed because target host or object does not exist.
  
  After searching on Google, I found many recommendations for this.
  the one I like is:
  
  +(source: Internet) +.
  
  Whe LOCAL_LISTENER is nothing or is not set correctly, PMON can record the VIP host name and the physical hostname with the REMOTE_LISTENER. This is incorrect in the CARS, but if this happens, the client may intermittently be routed to an endpoint listens on one of these addresses. If the client cannot resolve the host name physical or even vip host name, the connection will fail with ORA-12545.
  And first set is important to check the output for: lsnrctl services < nom_recepteur >
  You should not see the physical hostname in the information manager for your RAC instances. Here is an example of a services of incorrect lsnrctl < nom_recepteur > output to a 2 node RAC cluster:
  oracle_rac_listener lsnrctl services
  Service 'oracle.oracle.com' has 2 occurrences.
  'Orcl1' instance, State LOAN, has 2 managers of this service...
  Managers:
  "DEDICATED" set up: 0 denied: 0 status: ready
  REMOTE SERVER
  (ADDRESS = (PROTOCOL = TCP)(HOST=myphysicalhost1) (PORT = 1521))
  "DEDICATED" set up: 326 refused: 0 status: ready
  LOCAL SERVER
  
  "Orcl2", State LOAN, has 1 operation for this service...
  Managers:
  "DEDICATED" implemented: 394371 refused: 0 status: ready
  REMOTE SERVER
  (ADDRESS = (PROTOCOL = TCP)(HOST=myphysicalhost2) (PORT = 1521))
  Here's an example of what it should look like when LOCAL_LISTENER is configured correctly:
  oracle_rac_listener lsnrctl services
  Service 'oracle.oracle.com' has 2 occurrences.
  'Orcl1' instance, State LOAN, has 2 managers of this service...
  Managers:
  "DEDICATED" set up: 0 denied: 0 status: ready
  REMOTE SERVER
  (ADDRESS = (PROTOCOL = TCP)(HOST=myVIP_host1) (PORT = 1521))
  "DEDICATED" set up: 326 refused: 0 status: ready
  LOCAL SERVER
  
  "Orcl2", State LOAN, has 1 operation for this service...
  Managers:
  "DEDICATED" implemented: 394371 refused: 0 status: ready
  REMOTE SERVER
  (ADDRESS = (PROTOCOL = TCP)(HOST=myVIP_host2) (PORT = 1521))
  Open a session with privileges to the instance and run the following commands so that LOCAL_LISTENER is correctly configured:
  change the value system LOCAL_LISTENER = "(address = (protocol = tcp (host = < your_vip_node1 >))(port=1521)) range = the two sid ="INSTANCE_NAME1";"
  Do the same for the 2nd instance where is set to < vip_host_node2 > and the sid is defined for the 2nd instance name.
  change the value system LOCAL_LISTENER = "(address = (protocol = tcp (host = < your_vip_node2 >))(port=1521)) range = the two sid ="INSTANCE_NAME2";"
  Now the correct address using the VIP host name is registered against the Auditors in the cluster.
  The client must be able to resolve all forms of the VIP host through their file/etc/hosts. that is, short name and complete.
  
  
  now my concern is:
  
  To change the LOCAL_LISTENER parameter in the init.ora/spfile database, it will require a downtime? or it will have a negative impact on our existing RAC databases?
  Please suggest?
  
  Thank you

  Hello

  Good config is already present, then check/confirm below

  1 tnsping , tnsping similarly & on nodes
  2 sqlplus @/ , sqlplus @/ similarly through the node
  3 Local_listener must not be empty it should point to the virtual host entry as below, try it before if everything fails

  NAME                                 TYPE                             VALUE
  ------------------------------------ -------------------------------- ------------------------------
  local_listener                       string                            (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=121.244.255.54)(PORT=1522))))
  

  Thank you
  Ajay more
  http://moreajays.blogspot.com

• Disable the auto reboot of Rac instances.

  Hello guys,.
  
  We can use the disable SRVCTL command disable a particular ASM instance or instance of database Rac clusterware restarting manually if we are performing maintenance activities. but in oracle databases 11 GR 2 RAC databases can be managed or managed the policy administrator. still, there are two automatic and manual strategies. automatic with automatically restart instances. Here, if we define politics in the manual the clusterware cannot restart the database instance.
  
  1. now, we have a RAC database with 5 cases and and defines us as manual policy. This means that, after a reboot of the system the clusterware is no longer able to restart all instances of database automatically... is that accurate.
  
  2. we can change the current policy to another strategy using the SRVCTL change database management_policy RAC y - d... here, the management policy can be just right either automatic and manual...
  
  help guys...

  Hello
  Point 1 and 2 seems to be OK for oracle 11g databases rel2.

  srvctl y {AUTO |} The database management policy MANUAL}.
  1 *. If AUTOMATIC
  (default), then the database is automatically
  in his previous running state (started or)
  stopped) when the database host computer is restarted.
  If MANUAL, then the database is never automatically
  restarts after a restart of the database host computer.
  A MANUAL setting does not prevent the Restart Oracle
  database monitoring during operation and
  restarting if an error occurs.

  srvctl change option
  * 2.Enables allows you to change the configuration of the instance without deletion and addition
  Resources of Oracle Clusterware. Using change preserves the environment in OCR
  configuration which would otherwise have to be entered again. The configuration
  description has been changed in the OCR configuration and a new Oracle Clusterware
  the profile is generated and saved. The change takes effect when the application is
  then rebooted.
  For example:
  srvctl change asm
  Change the listening port used by Oracle ASM, the Group of disk discovery string used by
  Oracle ASM or the SPFILE used by Oracle ASM for a single instance database or a
  the cluster database.
  Hope it answered your questions.

  Best regards

  Rafi.
  http://rafioracledba.blogspot.com/

  Published by: Rafi (Oracle DBA) December 2, 2010 21:39

• Unable to start the RAC instance

  Hi all
  
  When you start the RAC instance on the first node, I get the following error and my database is not open.
  
  #######################################################################################
  SQL > startup
  ORACLE instance started.
  
  Total System Global Area 608174080 bytes
  Bytes of size 2058048 fixed
  255854784 variable size bytes
  343932928 of database buffers bytes
  Redo buffers 6328320 bytes
  Mounted database.
  ORA-00313: open failed for the members of the Group of newspapers wire 2 6
  ORA-00312: threads of 6 2 online newspaper: ' / u01/redo_groups/logSLVMRAC26.ora'
  ORA-27037: unable to get file status
  HP-UX-ia64 error: 2: no such file or directory
  Additional information: 3
  #######################################################################################
  
  The redolog file "/ u01/redo_groups/logSLVMRAC26.ora" has been created in the local disk for instance CARS 2 in the second node to the cluster 2 knots. Like that, I created redolog file ' / u01/redo_groups/logSLVMRAC15.ora ' by RAC example 1 in the first node in the localdisk. When to start the RAC 2 instance in the second node get similar error.
  
  #######################################################################################
  SQL > startup
  ORACLE instance started.
  
  Total System Global Area 608174080 bytes
  Bytes of size 2058048 fixed
  264243392 variable size bytes
  335544320 of database buffers bytes
  Redo buffers 6328320 bytes
  Mounted database.
  ORA-00313: open failed for the members of the Group 5 of the thread log 1
  ORA-00312: wire 5 1 online journal: ' / u01/redo_groups/logSLVMRAC15.ora'
  ORA-27037: unable to get file status
  HP-UX-ia64 error: 2: no such file or directory
  Additional information: 3
  #######################################################################################
  
  
  Have tried to remove this redogroups, I'm not able to remove these. I get this error.
  
  SQL > startup mount
  ORACLE instance started.
  
  Total System Global Area 608174080 bytes
  Bytes of size 2058048 fixed
  255854784 variable size bytes
  343932928 of database buffers bytes
  Redo buffers 6328320 bytes
  Mounted database.
  SQL >
  SQL > select * from v$ logfile;
  
  GROUP # STATUS TYPE
  ---------- ------- -------
  MEMBERS
  --------------------------------------------------------------------------------
  IS_
  ---
  2 ONLINE
  / dev/slvm_rac/rredo1_2
  NO.
  
  1 ONLINE
  / dev/slvm_rac/rredo1_1
  NO.
  
  GROUP # STATUS TYPE
  ---------- ------- -------
  MEMBERS
  --------------------------------------------------------------------------------
  IS_
  ---
  
  3 ONLINE
  / dev/slvm_rac/rredo2_1
  NO.
  
  4 BLAND ONLINE
  / dev/slvm_rac/rredo2_2
  
  GROUP # STATUS TYPE
  ---------- ------- -------
  MEMBERS
  --------------------------------------------------------------------------------
  IS_
  ---
  NO.
  
  5 ONLINE
  /U01/redo_groups/logSLVMRAC15.ora
  NO.
  
  6 ONLINE
  
  GROUP # STATUS TYPE
  ---------- ------- -------
  MEMBERS
  --------------------------------------------------------------------------------
  IS_
  ---
  /U01/redo_groups/logSLVMRAC26.ora
  NO.
  
  
  6 selected lines.
  SQL > alter database drop logfile Group 6
  2;
  alter database drop logfile Group 6
  *
  ERROR on line 1:
  ORA-01623: log 6 is the journal current for example slvmrac2 (thread 2) - can't remove
  ORA-00312: threads of 6 2 online newspaper: ' / u01/redo_groups/logSLVMRAC26.ora'
  
  Any help to get out of this problem or how to remove the roll forward group which is the newspaper online for the current instance.

  Well, then you have to reinstall both Redo Log files accessible from nodes.

• When I try to install firefox again once it is said, the computer must be restarted to complete the uninstall of the previous version, but when restarted and tried again, it says the same thing, what do I do?

  When I try to install firefox again once it is said, the computer must be restarted to complete the uninstall of the previous version, but when restarted and tried again, it says the same thing, what do I do?

  Please try this: copy the files formhistory.sqlite (or formhistory) and places.sqlite (or places) if they exist and remove the entire Mozilla folder in %APPDATA%\protector.exe and also the Firefox folder in Program Files. Please see.

• Mail is stuck in a loop, force quit/restart it closes, and then when I opened the Mail once again, the cycle starts over.

  I am El Capitan OS X 10.11.3, Mail is stuck in a loop, I was responding to a message, and I tried to send it. Now, he presents this message, and then switch to another message / desktop /, mail inbox home screen, then the loops again.   Force quit and restart it closes, then when I open the Mail once again, the cycle starts over.

  I can't use the mail app at all.

  Open the menu go with down option - Open Library - containers and move the folder "com.apple.mail" on the desktop.

  Restart your Mac and check if it works very well.

• We have no admin on Windows 7 users. They change the homepage and it works for this session. When they close the browser and restart again the default home page is displayed.

  Windows 7 Sp3. using Firefox 7.01
  Non admin users.
  Home page change to what they want and it can work.
  BUT when they close firefox and open it again the home page goes back to the default setting

  You have a (security) installed software that can restore files when starting?

  See:

  • http://KB.mozillazine.org/Preferences_not_saved
  • https://support.Mozilla.com/kb/preferences+are+not+saved

• Need advice from configuration to the flash cache multi-node RAC/ASM

  We have a database of CARS to work two nodes. We install a new fusion 640 GB flash card in each node. The is a double card, so that it shows up as two devices: / dev/fioa and/dev/fiob on each node.
  We have created two groups of private drives, one on each node. The Group of disks on node 1 is '+ FLASHCACHE' and the disk on node 2 group is "+ FLASHCACHE2".
  
  We have not found specific examples of how to configure the parameters of the init for flashcache on RAC/ASM. We guess that we must do the following. If anyone would be critical and confirm or suggest something different, we would appreciate it very much!
  
  "prod1.db_flash_cache_file ='+ FLASHCACHE/flash1"
  prod2.dg_flash_cache_file = '+ FLASHCACHE2/flash2'
  * .db_flash_cache_size = 600G
  
  Thanks for any advice.
  
  Jim
  
  Published by: jimbev90 on January 5, 2012 08:18

  Hi Jim,.

  prod1.db_flash_cache_file='+FLASHCACHE/flash1'
  prod2.dg_flash_cache_file='+FLASHCACHE2/flash2'
  *.db_flash_cache_size=600G
  

  Your configuration is correct.

  Smart Flash Cache database is not shared across RAC nodes. It is private to each RAC instance. For this reason, each RAC instance must define its own local cache of flash file path. When the flash cache is managed by ASM, a separate diskgroup is necessary for each instance flash cache.

  You can use ALTER SYSTEM for db_flash_cache_size set to zero to disable the flash cache. Alternatively, you can use ALTER SYSTEM to deliver the flash cache to its original size to reactivate it.

  Read this white paper Oracle database Smart Cache Flash
  http://www.Oracle.com/technetwork/articles/systems-hardware-architecture/Oracle-DB-smart-Flash-cache-175588.PDF

  Kind regards
  Levi Pereira

• Out of memory when upgrading of the Sierra and cannot restart (didn't return to the top)

  When I am upgrading to Sierra, my Mac is not enough storage. So it suggests me to reboot and try to install again. I clicked to restart button but it still install MacOS Sierra.

  You know a way to access the OS X EL Capitan (my previous operating system)?

  Thank you.

  I just installed it.

  I enter Mode secure with reboot and hold down the Shift key. This isn't a job I food and hold it pressed to force shutdown.

  So I rebooted again. Surprised, he continued the installation and it is successful.

  NOTE: My Mac had about 7 GB free before installation.

  Good luck!

• Pavilion at THE 003tx: Windows Explorer restarts sometimes

  Then em do some work in any software in the background windows Explorer restarts. Or even when we're simply in the home screen, a black screen comes suddenly and Explorer starts again. Install are not affected, but while on the copy of files or movies make this restart to stop and we start to copy again. I tried to update windows and stll the problem exists.

  Please give me any suggestions to fix this problem. Its been only two weeks since I bought this product.

  Thank you

  Hi @SreyasSunil,

  Thanks for getting back to me.

  Please try the following document.

  The computer restarts unexpectedly (Windows, 10, 8)

  Please continue to keep me in the loop.

• iPhone 6 s more, menu at the bottom lack.

  iPhone 6 s more, menu at the bottom lack.

  After trying to RESTART or REBOOT, the menu at the bottom of the screen is missing. Is there a work around for this problem?

  "Reboot or restart"... How?

  By pressing home and power together key and holding them for 10 seconds until the Apple logo appear?

  That's what you should try.

  If not, please tell us exactly what you are doing and what you're seeing (or not see).

• Residential group number! I can't change the password or leave the group. Convenience store can not solve the prob

  I did a clean install of OS win7 ultimate. If I try to change the PW, it says that windows cannot configure a homegroup on this computer... but still, he said that this computer belongs to a homegroup. If I try to leave the homegroup, it says windows could not remove the computer from the group. Troubleshooting, declare that the Peer Name Resolution Protocol service or peer network identity Manager is not open. If I go in services, it shows that the NIBPM is automatic and the PNRP protocol is manual. If I try to start the PNRP protocol, it is said that windows didn't start the service because of the error code # 0 x 80630801. Peer Networking Grouping also gets error code # 1068.

  Hello

  On the Start Menu, open the control panel and open Folder Options.  Click on the view tab, check the radio button titled "Show hidden files, folders and drives" and out the box "Hide extensions of known file types".  Click on apply to apply these changes.

  Then go to C\Windows\ServiceProfiles\LocalService\AppData\Roaming to Local disk and open the PeerNetworking folder.  Inside, you should see a file called idstore.sst.  Delete this file.  Close this window and return to Folder Options then re - hide hidden files folders and drives and extensions of known file types.

  Restart the PC and let Windows load completely.

  Now, check if the following services appear as shown below, and if they are not, if you can set them up now.

  Peer Networking Grouping this should see the service type as Manual and the service is expected to show that started.

  HomeGroup Provider should show as Manual startup type, and the service should show as started.

  Peer name resolution should see commissioning type as Manual and the service is expected to show that started.

  Peer Networking Identity Manager should display type as Manual startup and service should show as started.

  If they are all able to start, or have already started, see if Homegroup now works properly.

  Kind regards

  DP - K

• Windows XP Clean install... copies the files and then restarts... Never installed!

  I've recently updated some hardware in my PC, a new Gigabyte motherboard and an AMD Dual Core processor. Here are the specifications of what Im running:
  • GIGABYTE GA-MA74GM-S2 AM3/AM2 + / AM2 AMD 740G Micro ATX AMD Motherboard
  • AMD Athlon X 2 7850 Black Edition Kuma 2.8 GHz Socket AM2 + 95W Dual-Core processor desktop AD785ZWCJ2BGH - OEM
  • 160 GB Sata hard drive
  • ATi 512 MB graphics card
  • 1 GB OF RAM
  • Generic CD-ROM drive base

  The rest is all pretty basic stuff... fans, etc heat sinks. It's pretty much a budget box, so there is nothing too special about it. I thought that I restart it come and go, but the process of starting always led me through the boot of MB, then to "loading of the operating system", then restart everything again.

  I did the walk through for clean install of Windows XP and everything goes well until it comes time for the operating system to install.

  1. Boot from CD
  2. Setup Windows XP now
  3. Delete the existing partition
  4. Create the new partition
  5. Choose the location and format of partition
  6. Copy the files in Windows XP

  The copy goes by fine... but after that is where the problem starts. Instead of going to Windows Installer, it will restart the PC.  After the reboot, it goes through the whole process that I mentioned at the beginning of this problem.

  What I am doing wrong?

  Hello

  Once the files are copied when the computer restarts automatically do not press any key to boot from the CD again and let the computer automatically launch the next step. Also remove any external devices attached outside keyboard and mouse.

  I hope hear from you soon!

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.