Agilent 6030 A with 59511A accessories relay drivers

Similar Questions

• Agilent 488.2 with Labview

  I have an Agilent 82357 B USB GPIB and have provided the code that uses GPIB read and write functions. I have installation OR MAX and Agilent connection Expert correctly. The program doesn't error but write and read timeout functions and does not work. I troubleshoot wrote simple code using VISA and they work. I wrote the same code using the GPIB functions and it does not work and after I run code written in VISA no onger work. I know that Agilent replaces the gpib - 32.dll with their version which redirects to their code.

  My question is, is there anyway to make the GPIB LabVIEW calls working with Agilent GPIB device and of course library GPIB? I think that the answer is, but I saw a post where someone said they do. I want just a definitive answer until I give the bad news.

  While there were some vendors implementing their GPIB drivers with the same function calls or use (ibwrt, Bird, etc.). I don't think Agilent has already done this and I used the maps of Agilent since the time they were still Hewlett-Packard. I'd love to see the post where somebody said, they could use the LabVIEW GPIB functions with a controller of Agilent.

  So, the answer is not to my knowledge. What you need to do is to use VISA. Enable Tulip support NOR-MAX and it should work.

• Agilent E3640A PSU with GPIB-USB-HS

  Hello all, I created an Agilent E3640A power control software standard interface GPIB. It works very well. Now, I want to replace the standard GPIB interface (with GPIB card) with GPIB-USB-HS adapter cable, so that I can send commands via USB connection, eliminating the need for GPIB card. How can I use my existing application to work with GPIB-USB-HS adapter cable? Is this a change? or I completely rewrite the code, and if so, are the drivers available for GPIB-USB-HS adapter cable? Thanks Jeet

  More information please.

  Have you removed the PCI interface before you try the USB interface? If this is not the case, your program may still try to access the E3640A on the PCI card.

  What is the USB HS recognized in Explorer measurement and automation as GPIB0?

  The E3640A knows if scan you for Instruments to MAX?

  What (number) error is raised during the execution of your program with USB HS?

  It would also help if you could show us NI SPY logs saved when executing your program with PCI and USB-Interface Card

  Usually you don't need to install different drivers, because the package NOR-488. 2 installs drivers for all variants of the NI GPIB hardware.

• Code 48 problems with Windows 7 device drivers?

  I have an Acer Aspire T180 Desktop that I have updated Vista to Windows 7.

  I do not see the DVD drive (ATAPI DVD W DH16W1P ATA Device) in 'my computer' and can not read anything with the drive.

  I get a message on the incompatibility of the driver with a code 48, but so far have found no solution on NewTech Infosystems acer or microsoft sites.

  Hi Tigger Tom,

  Welcome to the Microsoft Answers community.
   
  If it helps, try the methods and check them off below.

  Method 1:

  1. click on start and then click all programs.
  2. click on accessories and then click Run.
  3. type regedit and then click OK.

  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  4. in the navigation pane, find and then click the following registry subkey:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  5. in the right pane, click UpperFilters.
   
  Note You can also see an UpperFilters.bak registry entry. You don't have to delete this entry. Click UpperFilters. If you do not see the UpperFilters registry entry, you may still have to delete the LowerFilters registry entry. To do this, go to step 8.

  6. on the Edit menu, click on delete.
  7. When you are prompted to confirm the deletion, click Yes.
  8. in the right pane, click LowerFilters.
   
  Note If you do not see the LowerFilters registry entry, unfortunately this content can't help you. Go to the section "Next steps" to learn how you can find more solutions or more help on the Microsoft Web site.

  9. on the Edit menu, click on delete.
  10. When you are prompted to confirm the deletion, click Yes.
  11. exit the registry editor.
  12 restart the computer.

  For more information, visit the lisks below:
  http://support.Microsoft.com/kb/314060

  Method 2: To access integrated computer diagnostics:

  1. click on Start, control panel
  2. in Control Panel, click system and security
  3. in the window system and security, in the center of the Action, click the common computer problems troubleshooting
  4. in troubleshooting computer problems window, click a specific task to diagnose and fix a problem automatically. To view more troubleshooters, click a category.

  Method 3: You can also try the steps of troubleshooting (filter drivers that can be loaded) provided in the material provided below.

  http://support.Microsoft.com/kb/929461 (this article can also be used for vista, but can also be used for windows 7)

  The following explains the error code number, as this article is published under Windows XP, but Device Manager error codes remain same for Windows 7
  http://support.Microsoft.com/default.aspx/KB/310123 (you can also try the troubleshooting provided steps)
   
  Hope this information is useful.
  Let me know if it worked.
   
  Thank you, and in what concerns:
  Umesh P - Microsoft Support

• R15 reformatted with XP, now the drivers are missing and will not connect Internet

  Hello!

  I got a Satellite R15 without recovery disks. I was thinking that I would do a set but never had him. Recently, I started having problems with my MSOffice 2007 software. I tried uninstalling and reinstalling, but files were corrupted and it did not work. My next step was to buy Windows XP tablet edition operating system. I reformatted and installed the software. However, I had to reinstall 3 times before I was able to get actually reformat my hard drive. The new system is missing the Center help for a reason any and was also the drivers missing. I went to the Toshiba Download Center and I have downloaded every driver/program as possible I might need for an XP operating system and install them all. Some of them would not work because they wanted to connect to the internet. Some of them did not work because miss me a "PRC driver." I also installed service pack 2 for Windows XP, but not service pack 3 because I do not have an internet connection. Initially, the modem, ethernet, sound, video and a few things were not pilots. Now I have drivers for all except one - seems to be to shock absorption software and I can not find anywhere. I need help.

  1. I can not always connect to the internet via ethernet or wireless
  2. I would like to have a center to help once again - I use it once a year or more, but it's good to know that it is there
  3. I'm still not able to install MS Office 2007
  4. I would like to get this software for shock absorption.

  Any advice would be much appreciated!

  The HARD drive works? I ran the test Advanced in Hitachi DFT to ensure is has no bad sectors.

  Install the driver 'Toshiba HDD Protection System' on the Toshiba site. Needs to be installed first, its very important common Modules.

  The Office CD is scratched? It works in the other PC?

  Ultimately, you want a Toshiba Recovery Disc, this way you can be sure that all drivers are installed correctly. I believe you can get replacement of Toshiba drives.

• Problem with the latest graphics drivers Intel 82830 M graphics Satellite 1100

  I have a 1100 Satellite with the Intel 82830 M graphics card. The latest driver is version 14.7 which I just installed - icon of graph in the right lower corner of a multicolored square changes a blue screen when you install this, and the mouseover text says "Intel(r) Extreme Graphics.

  However, since installing it, my screen freezes everytime I start a game, or if I go into display properties & change anything. A hard reboot is required. Also, the startup process takes 2 - 3 times as long since this upgrade.

  Everyone knows about this problem? Does anyone know of a solution? I've seen a few posts on other forums about this, including some say that this problem came from XP Service Pack 2. Can anyone confirm this?

  Hello

  I assume that you have installed the driver for graphics card on the Intel site and you do NOT use a graphic driver Toshiba, which has been designed especially for the use of the laptop.
  Well, Toshiba recommend that you use the drivers from Toshiba. In this case, you should try to use the recommended graphic driver that you can download from the Toshiba driver page.

• IE9 does not display graphics at all with two display running drivers.

  Hi all. Thank you for taking the time to read my first post.
  I just picked up my new A660 reception - 1 H 7. For some reason, Internet explorer 9 appears not at all no graphics while two display drivers are running. I have intel HD Graphics and nVidia 310M graphics installed in Device Manager and only when I turn off the nVidia 310 m it doesn't then display graphics in IE9. If I disable the Intel HD graphics card, the entire screen goes completely and I have to force a reboot hard to recover.
  Could someone please explain to me why I have two display drivers? I guess the nVidia card is the most powerful on both but can't make it work independently of the Intel one, if there is a fix for the display problem in IE9.

  Pause to breathe!

  Thank you everso much and I look forward to contribute to this forum myself by helping someone soon.

  Hello

  What is your laptop pre-installed with Toshiba recovery image original you got with your laptop (WIN7 64 BIT HOME PREMIUM)?
  I put t understand how you can have listed two graphics cards when your laptop specification says your laptop's graphics card from NVIDIA to inside.

• Satellite A300D with 64-bit Vista - drivers for Conexant High Definition

  Hello

  I got Satalite A300D-15B AMB 64-bit laptop with Vista 64-bit installed. After I installed Vista, it automatically takes the audio drivers for sound card, but Dolby has failed.
  I tried to install the drivers of toshiba, it fails.

  Can someone guide me how to install the drivers for Conexant High Definition Audio Vista 64 bit please...

  Kind regards
  Ganesh

  Hello Ganesh

  Sorry, but this laptop model is not supported for Vista 64 bit and I don't know what the driver installation you are writing about.
  What you can try is to download and install THIS driver.
  It's driver for Satellite A300 but this laptop has the same sound card as your Satellite A300D - Conexant CX20561.

  Please post the results.

• Preparation of an installation of Windows XP Home edition CD with a MINIMUM required drivers for A200-1AX

  Greetings,

  I am trying to install Windows XP Home edition on my old days by Satellite A200-1AX. Today, I tried to boot from the CD of Windows XP Home edition or after the copy of the system files, the laptop produces the error that Setup did not find any hard disk during the Installation of Windows XP. I looked on the internet and found the following page:

  http://www.howtogeek.com/HOWTO/Windows/resolving-Setup-did-not-find-any-hard-disk-drives-during-Windows-XP-installation/

  Explains how to resolve this problem. So I try to make my own installation CD of Windows XP Home edition with the necessary drivers. My first question is: what are the minimum required drivers to ensure a smooth installation process until I get the XP running? It is not necessary to install the drivers for all the A200-1AX since the first installation of XP, I can always go back and install those remaining of the XP; but I don't want the installation process interrupted due to a missing driver where I have to repeat the process of manufacturing more install of WXP CD custom. The list of drivers and devices provided by Toshiba is too long to write on a single installation with XP CD.

  My second question is: there is an update of the bios/firmware required in accordance with the instruction list. Is it necessary BEFORE or AFTER the installation of Windows XP Home edition?

  If I decide to go back to VISTA using the recovery CD, I must restore the bios/firmware?

  Thanks in advance for your answer.

  Best regards, Ashraf.

  > My first question is: what are the minimum required drivers to ensure a smooth installation process until I get the XP running

  You will need to include only the Intel Matrix Storage Manger for the XP CD again. Without this iMSM XP will not see the HARD drive
  This driver is important. Other drivers can be installed after the installation of XP!

  > My second question is: there is an update of the bios/firmware required in accordance with the instruction list. Is it necessary BEFORE or AFTER the installation of Windows XP Home edition?

  There are 2 versions of BIOS; One for Vista and one for XP. Generally, the update of the BIOS must be made before the instillation of OS but you can also try to do after installing XP. In both cases, the update of the BIOS would be possible.

  > If I decide to go back to VISTA using the recovery CD, I must restore the bios/firmware?
  Generally, Yes! Without the good BIOS features like the FN buttons could not work properly!

• Satellite P300 - stuttering with new BIOS and drivers for sound card

  I have Toshiba laptop Satellite P300 (PSPCCE) with Vista and the latest patches installed.
  Everything was working ok until I installed the last set of patches, has been the Tempro alert about them. I installed the new BIOS (3.40) and card drivers his (Conexant 4.83.1.0) and now all the minutes I see spike high CPU spike freezing enemy of system one or two seconds.

  I see in Process Explorer these spikes are caused by the system and that usually means drivers.
  Anyone else noticed something similar since the last update?

  BTW. There are 2 audio drivers to download site, 4.36.10.0 the 25.05.2009. but the file is named 20081201122001 sounds. ZIP and 4.83.1.0 as of the 07.05.2009. named sound - 20090507143928.zip but with a date more recent AI apparently from 2008.

  > btw. There are 2 audio drivers to download site, 4.36.10.0 the 25.05.2009. but the file is named 20081201122001 sounds. ZIP and 4.83.1.0 as of the 07.05.2009. named sound - 20090507143928.zip but with a date more recent AI apparently from 2008.
  I think that you should use the most recent version and it s a v4.83.1.0. It seems that the v4.36.10.0 was published also, but in this case, it s always recommended to take a newer version.

  With regard to the system of freezing for a second or two:
  I think that this might be related to some background processes. Perhaps a process that runs in the context of the Vista operating system causes this tiny interruptions.

  Of my knowledge tool Tempro runs in the background and scans the system and HARD drive.
  You can check the processes in MSCONFIG and if necessary may disable some of the trials.

• No problem with the enumerations of Drivers of Instruments

  I noticed in the National Instruments standard guidelines driver whenever a reference to a control that would have different options based on the test came, a ring selector was recommended and a listing... Is there a good reason to stick with the selectors to ring and not use enum? For example, one of my drivers has 4 different channels CH1, CH2, CH3, CH4... An enumeration settle well here because I can use value of the text-based config file format and create the appropriate enumeration value I want.

  "CH1" (text)--> form to value--> CH1 (enum value)

  Thanks for your help

  Are you referring to this document: http://zone.ni.com/devzone/cda/tut/p/id/3271 ? There is no explicit mention on is not the use of an enumeration. I think that it is essential to use some for control menu to facilitate the selection of the function. In some cases, a ring can be more convenient than an enum. For example, if a selection requires the actual value to be something other than the normal value of the control. Example, the selection of "DC" requires sending a value of 101 to the instrument instead of 0. In this case a ring would be more convenient because you can set values for the elements of the non-sequential ring.

• Problem with the installation of drivers for HP 650

  Hi guys,.

  Can you help me with this problem. I have Windows 7 Professional installed on my 650 HP and installed all the drivers, but I can't install the drivers for the network, PCI Device controller and SM Bus controller.

   

  
  I tried several solutions, but none of them helped. I am writing you to this below 3 software problems hardware ID:
  

  Network controller

  PCI\VEN_168C & DEV_0032 & CC_0280

  PCI device

  PCI\VEN_10EC & DEV_5229 & CC_FF00

  SM Bus controller

  PCI\VEN_8086 & DEV_1E22 & CC_0C05

  It will be great if anyone knows a solution for this problem. I fight with this few days.

  I thank in advance and hope to hear from someone soon

   

  You are the very welcome.

  This is certainly the driver you need.

  Try the one directly from Intel.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=816&DwnldID=20775&keyword=chipset+installation+utility&lang=eng

• I need assistance with updates for the drivers on my computer.

  I'm new with computers and need help to ensure that my drivers are up to date, I have a Dell Inspiron 1501 running Vista 32-bit and also where to go to get the updates, I need. Thank you in advance for any help, anyone can have to offer.

  Is the first right to updates pilot "if it ain't broke, don't fix it'. Normally if everything works, you want to leave things as they are. The exception is that heavy players usually want to update their video and sound drivers for every last bit of absolute performance of the equipment to get the best frame rate. If you are not one of these people, you need not update your drivers, if there is no problem you're trying to solve.

  That said, if you really want to update your drivers you won't get the from the website of Dell support for your specific model computer. Enter your Service tag to ensure that you get the right ones.

  http://support.Dell.com/support/downloads/index.aspx?c=us&l=en&s=Gen

  MS - MVP - Elephant Boy computers - don't panic!

• Problems of latitude 10 with Wacom tablet PC drivers

  I am the owner of a Dell Latitude 10 and last Friday, by mistake, instead of installing the driver with v720-10 recently published by Wacom, I installed the Asus with v720-9. As a result, the active pen no longer works correctly: when moving from the tip of the stylus on the screen, the cursor appears and disappears at random and never close to the tip. The stylus is now absolutely unnecessary and, because of his erratic behavior, it is completely impossible to calibrate it.

  To remedy, I restored it first my tablet to an earlier point in time and it does not solve the problem. Then I am in contact with the Dell Customer Service Spanish and they first had me install the latest versions of the pen drivers and, seeing that it does not solve the problem, they end by sent me a new digitizer in case it was a hardware problem, but this does not solve the problem.

  Then I refreshed the system without affecting my files, and because the problem persisted, I finally removed everything and reinstalled Windows 8 completely erase the data, but the pen still does not work. The rest of the Tablet is OK, even the touchscreen works well.

  Now, I do not know what more I can do in order to get the digitizer repaired. In another forum, I have been informed that the version of Wacom Tablet PC with v720-9 ruins of the pen on the Tablet sensor (Latitude 10 is one of those who may be affected) and that the only solution would be an update of the firmware from Dell. Can anyone confirm that this is right? Is it possible to fix it?

  Hi @HBEN,

  The update of the firmware is available for you at the following address:

  https://dl.dropboxusercontent.com/u/4818467/Wacom%20Soluci%C3%B3%20-%20WTW%20FW%20update%20FW0233.exe

  Here are the installation steps:

  -Uninstall any driver from Wacom
  -Run the update tool
  -If the update tool indicates 'No response' then update, do not close the tool, it works in the background.

  I was told it would auto close when it's over. In my case, it appeared an error message. I waited for two or three minutes, and after restarting the tablet pen came miraculously alive again.

  Good luck

• Impossible to install any program to do with windows or printer drivers?

  I can't get windows updates keep giving me. I think I'm up to about 55 so far. I can't get the drivers installed by windows - they install form Epson, but then a pop-up at the bottom of the screen says unable to install the drivers and it cannot recognize my printer. I also tried to download Heimdal and is not yet open. I tried to find WindowsUpdate.log to see what is happening and what I can see is not permitted. I even tried to download - System Update Readiness Tool for Windows 7 for x 64 based systems (KB947821) [October 2014]

  and who says windows cannot open this file. So I don't have an idea of what has gone wrong with the system and I don't really want to do a clean install as I have so many programs it takes me forever to re - download all programs and find all the codes, etc.

  So is there someone who can solve this problem?

  If so, I would be extremely and eternally grateful.

  thanking you all in anticipation of a good answer.

  Hello

  Thank you for the update.

  Program installation or removal fails due to corrupted registry or install blocked key. Follow these methods and check if that helps:

  Method 1: Unregister and register the Windows Setup program again

  1. Press Windows key + R, type MSIEXEC /Unregister. and then click OK. Even if you do it right, it may seem that nothing is happening.
  2. Press Windows key + R, type MSIEXEC/REGSERVER, and then click OK. Even if you do it right, it may seem that nothing happens, or you can briefly see an hourglass. After you run this command, the operation is complete.

  Method 2: I suggest you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software. The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Warning: Data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

  I hope this helps.