IE9 does not display graphics at all with two display running drivers.

Similar Questions

• HP 932C PRINTER DOES NOT WORK ON A NETWORK WITH TWO DIFFERENT OPERATING SYSTEMS.

  I have a 932C HP printer connected via USB to a desktop Windows XP (Dell E520), which is part of a home network.
  I also have a HP Pavilion dv5 notebook, running Windows Vista Home Premium 64 - bit, connected to the same network. This book can find the printer on the network. However, when I try to capture the 932C printer, the following dialog box appears:
  "The printer"hp deskjet 930C series"server has not the printer driver installed. If you want to find the right driver, click OK. Otherwise, click Cancel and contact your network administrator or the OEM equipmente for the printer driver. »
  When I click OK, another dialog box appears:
  «The file ' *.» INF' we (unknown) is needed. Type the path where the file is located, and then click OK. »
  However, I can't find any feasible *.inf file in laptop HP hard drive (both partitions).
  I tried to download the driver from the HP website, but it says that Windows Vista already has the driver for this printer! Well, now I'm stuck!
  I want to emphasize that the printer works fine if I connect it directly to the USB port on the HP laptop. But I want to use the printer via the network, keep it hooked to the Windows XP desktop.
  How to solve this problem? Thank you.

  There is a post where a user got it works with another printer. I'll link below then you can try the solution here. Let me know what happens.
  
  Share the printer for 64 bit with 32-bit system

• Problems with my slower... graphic AGA and external monitor does not display

  First of all, let me say that I am not computer savy.  I just bought an Alienware 17 June 1.  Got my AGA and installed a Geoforce GTX 980 inside graphics card.  First I tried as far as I know (which is not yet much about computers) to connect an external monitor to the AGM.  For some reason that the monitor does not display anything and my laptop States there is not all the other monitors it can detect.  Now, the other problem I have is that I run games using my AGA and when its connected I can really see my games download restless and slower.  I thought that the whole purpose of the AGM was pushed my graphics and do amazing things... not very frustrating.  Any suggestions on what I might hurt?

  Try the following:

  Disconnect the graph.

  Uninstall the video card drivers.

  Install the following driver (this version is not in the official Dell support website again, however, it has been tested by our engineers)

  Restart the system and connect the graphic amplifier and test it.

  Please let me know if this helps you solve the problem.

• Windows Media Center does not display my photos. I tried to re-setup my album and it shows my files but no pictures in them. I can see my photos in all viewers

  all my photos are in JPEG format, I download my photos on several websites and on my Windows live.com page, I also see with Windows Live Photo Gallery, I use Adobe Photoshop 7 to edit and save my pictures in .jpeg format, I can visualize in Picasa, PhotoStudio, ZoomBrowers EX etc.. I can spend my photos to one of my other computers and my pictures by e-mail, and they can be consulted. I open one of my photos in Photoshop and saved in a folder on my desktop in .jpeg and .bmp and it does not display. I sort my folder in date and make sure that hidden files is checked. I know I'm missing something, but still nothing.

  Hello
   
  Welcome to the Microsoft Answers site!
   
  How long have you had this problem?

  All files compatible photo in your library in Windows will appear in Media Center, including whatever it is stored in the folder my pictures or public photo. If you store images somewhere else, like an external hard drive, you can add them to the Media Center as well. To learn how, see Add files to media in Windows Media Center.

  The following is a list of reasons why an image will not display in Media Center, as well as suggestions for correcting the problem.

  • The picture file type is not supported in Media Center. For example, some digital camera photos are saved in the RAW file format, which is not supported in Media Center. If you have a photo editing software, try to open the picture in that program, and then resaving in a file type that is supported (for example, JPEG). To see what types of files are supported in Media Center, see file types supported by Windows Media Center.

  • The file is corrupted. If this is the case, try to open the image in another photo editing program, and then save it back into a different file type. For more information on the damaged files, see the files corrupted: frequently asked questions.

  • The file is hidden. You can view a hidden file by changing its properties in Windows. For more information, see Show hidden files.

  Please see the article for more details below:

  http://Windows.Microsoft.com/en-us/Windows7/working-with-pictures-in-Windows-Media-Center-frequently-asked-questions

  Back to us for assistance.
   
  Kind regards
  Savan - Microsoft technical support.

• My computer with Windows 7 does not display photos in folders when you open a folder where are saved in photos.

  My computer with Windows 7 does not display images in folders when you open a folder where are saved the images there, I do not see any image photo immediately. I don't see it when I click Open the pic. Then for the next photo, I have to click Open once again, one by one. So without opeing one by one, I can't have see images, it is very difficult for me to manage all the images.

  The following article might be worth a visit:

  Windows 7 - How to enable or disable
  Thumbnails in the Explorer of Windows 7
  http://www.SevenForums.com/tutorials/11738-thumbnail-previews-enable-disable.html

• BitmapField does not display an image bitmap. In fact, it does not display anything at all...

  My problem is simple and fast. I am probably just a stupid mistake, but the BitmapField component does nothing and does not display the bitmap image. I first tried to display a Bitmap using its setBitmap (bitmap Bitmap) method, which did not work. Then I tried to use it's method setBitmap to the Builder, who did nothing at all no more. Then I tried to use setImage using an image encoded if nothing happened again. Yes, both the encoded image and methods of Bitmap.fromBitmap that make new Bitmap objects and EncodedImage POINTENT to real images in my project folder. So what I am doing wrong, I forget to call a method in needed or what? I use Eclipse with the plugin and I use the Blackberry 9550 Simulator.

  First of all, your use setSpace is incorrect. What you are doing here are to define a space around the bitmap image - in this case, the space is bigger than most of the screens, which will ensure that your bitmap image is not actually on the screen. See the description of the API in the javadocs.

  Second, you SHOULD check the return of getBitmapResource(). If it returns NULL, then the resource was not available. What you're doing here can hide a problem.

• My model is an integrated and I was afraid to take it apart and * it upward. I tried all the f keys, but only F2 works. It does not display my HD, and it does not start. What should do?

  Hey guys, so I have an ASUS X502C and last night, it has become very slow, that I tried to close all pages open and it started making a very loud noise. I couldn't even turn off, so I closed the lid and went to sleep. When I woke up it was still on the same screen until I tried to close it and turn it off. He went to a black screen with the back light on. My model is an integrated and I was afraid to take it apart and * it upward. I tried all the f keys, but only F2 works. It does not display my HD, and it does not start. What should do?

  Hey guys, so I have an ASUS X502C and last night, it has become very slow, I tried closing all open pages, and he started to make a very loud noise. I couldn't even turn off, so I closed the lid and went to sleep. When I woke up it was still on the same screen until I tried to close it and turn it off. He went to a black screen with the back light on. My model is an integrated and I was afraid to take it apart and * it upward. I tried all the f keys, but only F2 works. It does not display my HD, and it does not start. What should do?

  Hello

  Looks like a hardware failure.

  Try to reinstall the operating system:

  It comes to the use of the Asus restore procedure.

  http://www.ASUS.com/support/FAQ/1006133/

  See you soon.

• Home screen does not display on startup with English version?

  Home screen does not display on startup with English version

  Looks like you're one of these creative cloud customers who do not have access to the Welcome screen.

  Excerpt from the article: troubleshoot home screen in Photoshop

  Welcome screen does not appear

  The home screen is not visible for a subset of creative cloud paid and trial customers. All content learning in the Welcome screen is available with CC learn on Adobe.com:https://helpx.adobe.com/photoshop/tutorials.html

  The Welcome screen also does not display if you have something other than the English game for the language of your UI in Photoshop.

  ~ David

• my iphone 5 s has been disabled. I'm trying to restore my iphone with itunes and itunes asks me to put the password for my iphone. but my iphone does not display the unlock screen. What should I do now?

  my iphone 5 s has been disabled. I'm trying to restore my iphone with itunes and itunes asks me to put the password for my iphone. but my iphone does not display the unlock screen. What should I do now?

  Hello

  Follow the instructions here:

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

• I am trying to download the trial version of Adobe Pro XI but the Download Assistant does not display it in the list despite the signing in. What is wrong with him?

  I am trying to download the trial version of Adobe Pro XI but the Download Assistant does not display it in the list despite the signing in. What is wrong with him?

  I had the same problem - my solution:

  1. If you create a connection to Adobe, make sure that you click the verification link in the email sent to you to verify your account.

  2. I leave the download Assistant, then began the process to download the original page download Assistant - he asked if I wanted to run the already downloaded version, which I chose.

  3. once the download wizard opens again, I logged in using my newly created connection and then, he showed the free trial in the product list (it has not been listed as free, but it was).

  My download is happening now - about 1 hour to go.

• No luck with CRT/LCD button - external monitor does not display

  Hello

  I have a Dell Inspiron 700 m laptop.  When I connect to the computer to my TV (a/k/a an external monitor), hold down the "Fn" key and press F8 (the "CRT/LCD" button), my laptop screen blinks and no picture on the external monitor.  One of my friends has a Dell XPS M1210 and - through the same steps - we were able to get the same establishment to work.  Maybe someone has any suggestions for what is the problem?  Would be - it simply a matter of obsolete or incorrect drivers?  Thanks in advance for the help and suggestions.

  Kind regards

  Aranas

  P.S. to the difference of the XPS M1210, my Inspiron 700 m does not display again - when I press the key "CRT/LCD" - the box with three display options: integrated screen external monitor and both screens at the same time.  The screen just flashes to black.

  
  

• my blog does not display a message with firefox

  the home page of my blog shows no message when using firefox. He has a message, that this page does not exist. It works with internet explore. How can I solve this problem? the blog address is
  http://coloradolady.blogspot.com

  I prefer to use firefox, but this must be corrected.

  On Windows, Firefox has a choice of two menu systems: a compact menu accessed by an orange button that says Firefox or the classic menu bar (File, Edit, View,...). If you use the menu bar, then go through tools to get to the Options.

  If I get 3 messages on this page (4/1, 4/2, 4/8): http://coloradolady.blogspot.com/2014_04_01_archive.html

  I missed a bunch? (I see even in 28 of Firefox and Internet Explorer 8)

• Lr6 does not display a map for images with location information

  Lr6 does not display a map. Keeps showing empty. Any tips?

  What version of Mac or Windows?

  See if this helps: module card is white. Mac OS.

• HP monitor does not display "DVi signal.

  My HP LP2275w monitor does not display "DVI signal" when connected with a DVI cable (supplied), but when it is connected via a VGA cable and adapter DVI/VGA (both supplied) it works but no BIOS screen. It begins immediately with the logo of the VICTORY.

  I just bought new HP Pavilion 500-158eg, Intel Core i5-4440, with AMD Radeon HD8570, 2GB processor, running on WIN7 Pro 64 b. VGA and another port of the motherboard are initially blocked so I can connect the monitor only via the output HDMI or DVI on the graphics card.

  I should note that on my old machine without a name with the graphic upgrade ATI Radeon, there is no problem and I used the same cable. There was an electric shock that causes the collapse of the motherboard so I can't even re - check on the old machine. I can't verify if there is a problem with the DVI cable because all laptops in our housing have only the VGA output...

  All solutions?

  Concerning

  Disco96, welcome to the forum.

  The specifications for the computer show that they run win 8 64-bit.  Downgrade you for Win 7?

  Here's what the quick reference Guide shows for the monitor:

  Model: (LP2275w) product #: video (KE289A4) standard: (WSXGA +) Native resolution: Aspect ratio (1680 x 1050): (16:10) types of connectors: (DVI - I, (support HDCP) DP) cable/s included: (DVI - D to DVI - D, DVI - I VGA, DP USB,)

  Also, here are the i/o ports of back on the computer:

  Figure 2: Rear i/o ports

• The Task Manager does not display the process and tabs, even if the menu can be seen.

  Dear community, I had a serious problem on my task manager. It does not display the process and tabs, although the menu is visible. Also, any time I open a program or system of adjustment, some and especially no option can be seen since there is no specified words.

  Here is a link that you can see a screenshot on my problem.

  http://kepfeltoltes.Hu/121231/592911021Untitled_www.kepfeltoltes.hu_.PNG

  Thanks in advance for your help

  Original title: Task Manager problem

  I managed to solve the problem by looking for alternatives. Apparently, the problem was caused by a dat file (C:\windows\system32 folder called FNTCACHE.) (DAT) I deleted and it worked like a magic. Everything was normal again.
  Deleted it and the work of all the graphical interfaces as it should.

  Thanks for your answer, in any case. I just post the solution here if someone ever faced with such a question in the future.

  Kind regards
  Laszlo