AIR 16.0.0.272 location does not work on iOS

Similar Questions

• The location does not work with WIFI or GPS inside, just outside?

  In the HTML5 specification, the geotagging option try to find your location from different sources such as:

  • GPS
  • WiFi
  • Cell tower

  Inside, it seems that the phone is unable to get the geolocation...

  can you give me some advice?

  Best regards

  Victor

  I did, I know what I'm talking about.
  the site is authorized, I need to download a file and the download file option does not work either, the operating system is not yet ready for commercial use.

  Thank you very much

  I get emails that I think will not solve the problem, we need geolocation and upload of files. and of course an emulator that works 100%, ready to deploy, phones etc.

  Thank you very much i'm going to close this. I don't have time to explain more problems, the problem exists and I hope it will be solved.

• Secure location does not work

  If set up my house as a safe place, so I wouldn't unlock with code when I'm at home, but it does not work. How can I make it work? It is implemented at the right address, are there other settings that I should look for?

  @Kim3 @GAZ082 @mr_xzibit  

  Just tested it with a Z3 running Lollipop and it works fine, when I unlock the screen, the schema lock is gone and I get a message:

  Your device is unlocked, then at home, that you set as a place of trust.

  To force your device to lock, turn the screen off, then turn it on and press the lock icon

• iPhone 5 home button does not work after ios 10

  My 5 Iphone Home button does not work after update final IOS version of 10.

  The home button works on the first push to wake the phone but it will not open the phone the second button.

  I activated the assist button, which does not work either. But what I discover is if I open device for assistance then touch and lock screen click on the button home will work once to open the phone. If I open any app I can't close it unless I go through the same routine.

  You attempted to restart your phone?

  You can do so by holding the sleep/wake button and the Home button simultaneously until the Apple logo appears

• print screen does not work with ios 10

  I used to take screenshots by pressing the sleep/wake button and the home button. with ios 10.01, it no longer works. even if I get home before the sleep button sleep. even if I press them together very quickly. It does not work. I tried several times by pressing on quickly. I tried to restart. still does not work.

  Hi laurannso,

  Thanks for the update to iOS 10! I understand that you have problems with taking screenshots with your device. You can try a simple reboot of your iPhone. Restart your iPad, iPhone or iPod touch

  If restarting the device does not resolve the problem, try to save your iPhone restaurant next to the factory settings.

  The backup of your iPhone, iPad and iPod touch

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod to factory settings

  These measures should have your screenshots works on your iPhone, as expected. Please use the Apple Support communities to post your question.

  Take care.

• The App Store search function does not work on iOS 9.3.3

  Search in the App store does not work for me since the upgrade to iOS 9.3.3

  Is that what someone else has this problem or can tell me how to fix it?

  Probably this will seem like a strange solution, but try to press the search key at the bottom of the App Store search 10 times screen. I read that it helped a lot of people.

• [AIR 3.0] New JSON feature does not work in Flashpromanager.new: Error #1065: Variable JSON is not defined

  After the upgrade of the AIR SDK 3.0 in Flash Professional CS5.5, I found a few problems.

  First of all, the JSON class in the library of as3corelib.swc get now a few compile errors:

  1061: call to a possibly undefined method decode a reference of static type Class.

  1172: definition com.adobe.serialization.json:JSON could not be found.

  At first, I was completely puzzled, because I had the good ' import com.adobe.serialization.json.JSON; ' reference.

  and I got the "as3corelib.swc" referenced in my ActionScript properties, so how that was not found?

  Then, I discovered that it is because it is in conflict with the new internal JSON class included in AIR 3.0

  (perhaps it should have been called something else, to avoid conflicts with the own Adobe as3corelib library).

  The new native JSON class's decode() method. It is now called parse()

  OK, so I tried to use the new class JSON, but after changing the decode() with parse() and removing

  the "import com.adobe.serialization.json.JSON; ' reference, Flash tells me that"Variable JSON is not defined.

  Really? The JSON class is displayed in the window pop-up Flash Builder code completion,

  complete with its all new parse() and stringify() methods! So why it say it is not defined?

  Also, my SWF file gets compiled without error at all, so that checks that the new 3.0 libraries are in place.

  I get the error "JSON is not defined" when running in ADL, not at compile time. Why?

  In order to spend in the AIR SDK 3.0, I've followed this guide:

  http://kb2.Adobe.com/CPS/908/cpsid_90810.html

  I know that this is on the upgrade to AIR 2.7, but I guess the steps to switch to AIR 3.0 would be very similar.

  only with the AIR3.0 SDK package, instead of 2.7.

  I also took care of type version = '13' in all the XMLs, instead of version = "12" as indicated in this guide, which is intended to 2.7.

  Also, I followed this advice on the addition of -swf-version = 13 in the properties of the project in Flash Builder window:

  http://blogs.Adobe.com/Cantrell/archives/2011/08/how-to-use-the-air-3-Beta-SDK.html

  But this does not seem to make a difference, because, even if I use Flash Builder for editing code (which is usually used for Flex).

  my project is a Flash Professional project, not a Flex, and when you test the project, Flash Builder works Flash Professional

  to compile, then run adl.exe (it's the same thing that if you click on the option "control / essay film / in the AIR Debug Launcher (Mobile)" within Flash Pro).

  In the window 'settings of ActionScript"in Flash Professional, I also have the good airglobal.swc referenced (from the AIR SDK 3.0).

  and the same airglobal.swc is referenced in Flash Builder as well (in 'referenced libraries') in order to get the correct code completion.

  I tried all sorts of things to try to make it work, but no luck. Still getting the error "JSON is not defined" when running.

  I'm getting desperate in this regard. I'll have to return to AIR 2.7.1 to stop wasting time on this issue.

  BTW, I also have another problem unrelated (though maybe it happens for the same reason as the other problem).

  Now Flash Builder says the method getTime() in my code, as if it was no longer a method of an instance of class Date.

  I have a line where I ask the timestamp like this:

  TS = new Date () .getTime ();

  Worked perfectly well until now with AIR 3.0.

  Now, when hovering the mouse cursor over the orange icon "(?)" appearing to the left, Flash Builder says

  "Access of undefined property getTime. Why?

  Documentation AS3 says nothing about getTime() get depreciated any thing of the kind:

  http://help.Adobe.com/en_US/FlashPlatform/reference/ActionScript/3/date.html

  In fact, in the completion popup code to watch as Flash Builder, now, it is not any mention

  set or get methods, as you can see here:

  

  I guess I can use property hung up instead of . getTime() but I don't know why I'm getting all the methods I had before.

  Any ideas why this is happenning? Especially the dreaded error 'JSON is not set.

  Well, after a lot of tinkering, I think I've finally found a way to finally make it work!

  I created XML files modified with the profiles required for AIR 3.0 and after many tries, it finally works!

  I downloaded here: http://www.mediafire.com/?d5e761frl5px4

  Here are the steps needed to get AIR 3.0 works correctly:

  1. Place the three files in the folder "c:\Program Files (x 86) \Adobe\Adobe Flash CS5.5\Common\Configuration\Players.
  2. Then, make sure that you have unpacked the AIR SDK 3.0 in the folder "c:\Program Files (x 86) \Adobe\Adobe Flash CS5.5\AIR3.0" do not crush the contents of the folder "AIR2.6", as suggested by the "Overlay AIR SDK" article (linked in the post above). He gave me problems. It is preferable to use another separate folder. My XML files are pointing to this new folder "AIR3.0".
  3. In the folder "c:\Program Files (x 86) \Adobe\Adobe Flash CS5.5\Common\Configuration\ActionScript 3.0 ' create a new folder named"AIR3.0 ". Inside this folder, copy the "airglobal.swc" file located in "c:\Program Files (x 86) \Adobe\Adobe Flash CS5.5\AIR3.0\frameworks\libs\air.
  4. Finally, you will need to keep the file "sample.xml - descriptor ' the ' c:\Program Files (x 86) \Adobe\Adobe Flash CS5.5\AIR2.6\samples" folder, but change the attribute xmlns to 'http://ns.adobe.com/air/application/3.0'.

  Yes, you must change this in the AIR2.6 folder, even if the SDK has been in AIR3.0. It's because of the way the publication settings work in Adobe Flash. It is hardcoded in a DLL, so that cannot be changed. Is not very intuitive.

  I think the AIR SDK installation should be much simpler than that! I know that Adobe AIR is intended for developers, not for end-users, but yet, all these procedures upgrade not well documented are a pain in the *. I lost a LOT of hours in this (more than half a day), with what should be a simple update!

  Adobe should make an SDK installation if we do not have to be tinkering with all these procedures errors whenever a new update is released!

  Well, I hope that these XML files are useful to someone and avoid more frustration.

  Kind regards

  OMA2k

  PD: BTW, I still have the problem of. getTime() described in my post above, but it is not very important.

  because I can still use the property hung up. Yet, it puzzles me why this is happening.

• User location does not work

  go to pokemon, it shows the location of the user not found but works perfectly. It's annoying because it does not disappear. It's my ipod or the app

  The Pokémon Go app is designed for users with smart phones and wifi users will not be able to access most of the features.

• the apple remote app installed on my air of 6s and iPad iPhone does not work to control the apple tv

  the apple remote app on my iPhone 6s and iPad Air, home sharing is enabled on all devices and the MBP, airplay works for mirroring via tv application, however, I have over the display of the remote app to control the apple tv, though the library, iI figure on my MBP

  Hello Pmilkes,

  Thank you for using communities Support from Apple!

  I understand that Remote on your iOS devices does not longer work to control your Apple TV. To begin troubleshooting this situation, I recommend you to read on the following article and through the implementation of the process to ensure that your network and devices are configured correctly.

  Set up remote for your iPhone, iPad or iPod touch - Apple Support

  See you soon!

• import a package location does not work

  I have a file, try to import a package that has some info re: create a custom cursor

  Import AS3.proyectos.trivia.CustomCursor;
  var myCursor:CustomCursor = new CustomCursor;

  The package of classes/CustomCursor.as file reads as follows:

  package AS3.proyectos.trivia.CustomCursor {}
  import flash.display.Sprite;
  import flash.events.Event;
  import flash.events.MouseEvent;
  import flash.ui.Mouse;

  SerializableAttribute public class CustomCursor extends Sprite {}

  private var slider: Sprite = new Sprite();

  etc...

  The invitation as a file is located in the same folder as the folder of AS3.

  The error indicates it does not reflect the location of the files.

  Could someone help lease?

  Then, you can use:

  package {/ / no need to address of location in the same folder}

  import flash.display.MovieClip;
  import flash.display.Stage;

  Import AS3.proyectos.trivia.CustomCursor;

  SerializableAttribute public class CursorExample extends MovieClip {}

  public void CursorExample() {}
  Create an object of our ship class of ship
  var myCursor:CustomCursor = new CustomCursor(); / / this bit is bad as I don't know what to put in here
  Add to the display list
  stage.addChild (myCursor);

  }
  }
  }

• MMS does not work after iOS 10.1

  IMessage works very well with apple users. But can't the apple users not text.

  Jake monroe says:

  IMessage works very well with apple users. But can't the apple users not text.

  If you cannot send or receive messages on your iPhone, iPad or iPod touch - Apple Support

  Make sure that the MMS is enabled in the settings of the message.

  IF the link provided does not help then you should contact your mobile phone provider as MMS is a characteristic of carrier.

• The battery does not work well. iOS 9.2.1

  Hello

  After upgrading my air2 iPad to iOS 9.2.1.  I have no problem with the battery not well like before and in the use of battery battery settings and still maintain the same and does not calculate correctly

  as in the screenshot ideas how solve this problem.

  Hello! Recalibrate your battery - drain your Tablet until he died and then it load completely.

  Reset the iPad.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  Below you will find some useful tips on how to make your device's battery life more longer. They work for 8 and 9 IOS iOS.

  http://www.IMore.com/battery-life-problems-iOS-9-heres-fix

  https://www.Apple.com/batteries/maximizing-performance/

  sues-iPhone-iPad-and-iPod-422229 http://www.idigitaltimes.com/iOS-82-Battery-Life-Problems-How-Fix-Quick-drain-is

• Component image source tag does not work in iOS devices

  Hello

  I want to put the url of the image in the source of the component of the image tag. I am currently using 12 c (12.1.3.0) JDeveloper.

  His works very well in Android devices, but does not not in the iOS Devices.

  Here's my amx page code:

  < amx:listView var = value ' row' = "#{bindings.youtubeFeeds.collectionModel} '"

  fetchSize = "#{bindings.youtubeFeeds.rangeSize} '"

  selectedRowKeys = "#{bindings.youtubeFeeds.collectionModel.selectedRow} '"

  selectionListener = "#{bindings.youtubeFeeds.collectionModel.makeCurrent} '"

  showMoreStrategy = 'autoScroll' bufferStrategy = 'viewport' id = "lv2.

  inlineStyle = "background - color:rgba (0,0,0,0.3);" margin-bottom: 10%; ">

  < amx:listItem id = "li2" >

  < amx:panelGroupLayout id = "pgl5".

  inlineStyle = "margin: 0;"  Padding: 4%; padding-top: 2%; padding-bottom: 2%; ">

  < amx:tableLayout id = "tl3' width = '100% ' inlineStyle =" width: 100%; ">

  < amx:rowLayout id = "rl3" >

  < amx:cellFormat halign = "center" id = "NF3" valign = "middle".

  inlineStyle = "width: 45%;" >

  < amx:image source = "#{row.thumbURL}" id = "i5" inlineStyle = "width: 100%;" / > "

  < / amx:cellFormat >

  < / amx:rowLayout >

  < / amx:tableLayout >

  < / amx:panelGroupLayout >

  < / amx:listItem >

  < / amx:listView >

  I also tried with the static url from java code parameter

  youtubeFeeds.setThumbURL ("http://iconbug.com/data/9f/507/7539a8d9ee940f052a34a4eaae4775a1.png" "");

  and through binding, I showed that in listView component. But same question does not not in the iOS Devices.

  
  

  Yes, its working very well. This image is in a picture file in a project itself.

  "< amx:image id ="i121"source="/images/bg.jpg "inlineStyle =" width: 100%; " height: 100%; "/ >

  
  

  Same thing I want to do this the image url.
  

  Any help will be appreciated.

  
  

  Kind regards

  Siddharth
  

  
  

  a. you only see the image in preview if encode you this url in amx?

  b. can you try to add *. iconbug.* whitelist and try. (You can do this MAF - application.xml-> Security-> remote URL whitelist)

  Kind regards

  Deepak

• Store Locator does not work on Lowes and HomeDepot sites

  When I enter my zip code and try to find a shop at Lowes or Home Depot sites, nothing happens. I put NoScript to allow the page.

  I had the same problem. Ran the Abine TACO of add-on. When I disabled this module, the store locator worked.

• Why don't the Radio on my iPhone 6 Plus does not work?  iOS 9.2.1

  When I try to play a Radio station in-app music on my iPhone 6 + with IOS 9.2.1 app snaps back to the registration page for subscription. Radio used to be free. Doesn't that end? !!

  Yes, all Apple music radio stations now require subscription.

  If it's an Internet radio station you are interested in, the station could have a separate application, or it is available via a web browser. Check.