Air play drops in and out

Similar Questions

• Wireless seems to drop in and out sporadically

  Wireless seems to drop in and out sporadically.  Time capsule is wired on the desktop; However, all other devices in the House keep dropping the Wi - Fi and are always asking for network password even if it is already registered in each device.  Three iPads, two iPhones, printer, laptop, etc... Very frustrating to spend the money on time capsule upgrade and have this happen.  Everything was very well on old AirPort Extreme.  What I've done wrong?

  Things are usually OK if you turn off the AirPort Extreme, which is used to "extend" the network... and... estart the time Capsule?

  If Yes, then configure AirPort Extreme correctly... see your other post... might solve your problem.

• Satellite A505-S6995 - Audio MP3s fading in and out of play

  Hello

  I had audio problems with this laptop since I bought it, first with the Crackle of the sounds, then I did the update of the bios that seemed to help, but now there are all sorts of problems with his awkward with Windows Media Player. If I use VLC or Winamp to play any of the mp3s on my laptop, there is no audio problem. However, if I use windows media 12 (last updated edition) Player, the audio volume seems to fade in and out and its a little wobbly and certainly enough for you drive crazy. This is strange, because if you go directly to the music folder and click on the mp3 even, it seems, there is a sort of plugin to make an audio preview and it seems to use windows media player (it does not open, but they way the icon looks like just seems to indicate that he) no audio no issues at all. I tried different mp3s with the same question. It is not hard I crank my system. It also happens with headphones and speakers. There is no audio problem with netflix audio, streaming, on demand, etc. I will continue to look and see if I forget something, but I have yet to find solutions.

  Here are my specs:
  TOSHIBA Satellite A505-S6995 laptop Intel Core 2 Duo P7450(2.13GHz) 16 "6 GB memory DDR3 1066 500 GB HD 5400 RPM DVD Super Multi NVIDIA GeForce GT 230 M?" / Windows 7 Home Premium 64-bit Service pack 1
  Version 1.80 - 03Updated-06-2010 nVIDIA VBIOS N10P/n10M to fix an audio crackling problem. ?

  Any help would be greatly appreciated!
  Thank you

  Looks like the audio be normalized.

  Disable the standardization in Media Player.
  You can also disable the improvements in the sound control panel.

• Is there a way to re set Lightroom to the original settings, I've been playing with it and got somewhere that I don't know how to get out of... not particularly computer savvu

  Is there a way to re set Lightroom to the original settings, I was playing with it and has gotten, somewhere, I don't know how to get out of. Not very computer savvy

  For starters, stop Lightroom

  On Windows, do the following

  Click the Windows Start button and in the search box type: -.

  %AppData%\adobe\lightroom

  Then press Return\Enter

  This will take you to the folder Lightroom (see image below)

  Select the Preferences folder and click on delete to send it to the Recycle Bin.

  Close the Lightroom folder, and re-start the Lightroom program.

  

• I converted a clip video .mov .avi and inserted in Windows Movie Maker, but it's only playing as sound and no video

  Original title: Windows Media Player
  I converted a clip video .mov .avi and inserted in Windows Movie Maker, but it's only playing as sound and no video, why?

  There may be some compatibility issues with .avi files...
  try to convert the .mov file to .wmv format before
  import into Movie Maker.

  There are many programs that can do conversions...
  The following freeware is an example...:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup260.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)

  First, you will need to decompress the file or just open the
  Drag FFSetup260.exe out of the folder
  and drop it on your desktop. To install left click.

  Next, after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your clips on the main screen .mov...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck...

• YouTube the sound cuts in and out

  In recent days, the videos YouTube is, at times, distorted, cuts in and out. This phenomenon appears only show all listening with, wireless, headset. When I disconnect the headphones and listen through the speakers of the iMac, the sound is normal. Also, AFAIK, the phenomenon isn't that videos of YouTube in Safari or Firefox, not iTunes internet radio, videos played in media players etc.

  I listen to the videos on a background of radio internet iTunes, and when the problems of its manifest, the sound of internet radio iTunes is smothered. Returns to the top of the normal when the distortion stops, and when I stop the video playback.

  I tried uninstalling and reinstalling adobe flashplayer (latest version), I deleted the browsing history, cache and cookies. Did not help.

  El Capitan, Firefox, Safari, latest versions.

  Someone has any idea how to solve this problem?

  I think that I thought about it.

  But first, I have to clarify that not all YouTube videos deal with this problem of sound. Only certain channels, no problems with other channels, except where they included third-party clips in their videos.

  I read somewhere that the headset and the computer must be plugged into the same power strip. I checked that. They were (Belkin Surge Master). So I tried to plug in the headphones to a different power strip (regular, plugged in the Belkin Surge Master), and of course, the problems of sound disappeared as if by magic. If anyone has an explanation for that, I'll be glad to hear.

• Video uploaded to Vimeo "rebounds" in and out!

  I downloaded some videos from Vimeo recently and I can only describe as "alternating" images in and out  .  .  See the example below:-

  https://youtu.be/mA5J5k9NvY4

  It was a 4K video playing perfectly while on Vimeo, but downloading, looks like this, which is a screenshot of the downloaded video playing on my desk.  .  .  I also converted it 720 p to make it easier to download.

  Is this something 'bounce' Vimeo has put in place to prevent people to download or is there another reason?

  I should also add that my computer plays perfectly the other 4K videos.

  What file format is the downloaded file from Vimeo?

• Audio fades in and out on m9400t

  The noise began fading in and out while watching television on my Media Center m9400t.  Has anyone seen cela or have any ideas on a fix?  I use the audio material deault Realtek, no optional sound card.

  Message edited by Big_Al12 on 04/13/2009 06:22
  Message edited by Big_Al12 on 04/13/2009 06:22
  Message edited by Big_Al12 on 04/13/2009 06:22

  I think I solved my problem.  I opened Control Panel Realtek no sound control panel and set by default and on Virtual Surround speakers.  I watched two recorded HD shows and several hours of programming with any his erasure of HD air.  This may very well be the solution!

• How is Samsung TV, possible to permanently hide the message that explains how to use Air play via Apple TV?

  How is Samsung TV, possible to permanently hide the message that explains how to use Air play via Apple TV?

  Apple Tv has the conference room mode turned on causing the message to appear.  Turn it off:

  On restrictions of airtime and the mode of the conference room on your Apple TV - Apple Support

• Marantz NA8500 doesn't appear in iTunes air-play list

  I have a new Marantz digital Airplay compatible audio device.  It is connected to my network (Apple Extreme) via ethernet cable.

  My Mac Pro is connected to the network via Wifi.

  I think that the Mac should be able to see the Marantz in iTunes and choose as the output device.  But it does not appear as a device of air-play.

  It works perfectly on my iPhone 6.

  It's the latest software, including the NA8500.

  I would be grateful for your suggestions...

  Mystery solved - there are 2 icons AirPlay in iTunes...  The Marantz appears in that next to the volume control in the menu bar.

  It works perfectly...

• New Clip Zip work strangely - music cuts in and out

  My apologies if this is covered elsewhere - I looked through the forums and does not see an answer to this question.

  I bought a new Zip Clip for one of my children.  After updating the firmware to version, 01.01.21 and loading mp3s mp3s are cutting in and out intermittently.  The sounds of the music very well, then silence for half a second or more, then back to the music.

  I thought that maybe the headphones, so I tried using an external speaker, she got the same results.  I tried to play the radio, which doesn't seem to have the same problem - she has played very well for about an hour and is not having the same problem.

  I tried a corner the headphone / speaker taken firm decision, but that does not solve the problem either.

  Any suggestions?  This could be a firmware issue?  Headphone Jack?  Or could I just have a bad unit and you have to put it back?

  Thank you

  A possibility, believe it or not:

  The headphone jack of new Clips can be incredibly tight, to the point that a new user can be afraid that he or she will break the player the first time.  Is it possible that the headphone jack is not in all the way?  It relaxes to a 'normal' level after an hour or two.

  Otherwise, you are sure that the music files are OK and in a format like the Clip?  Have you tried the files on another material and are they OK?

• CREATE/ALTER/DROP instructions and alerts log

  In the Oracle (12 c) Administrator's Guide under "monitoring errors with Trace files and alert newspaper ' is the following:

  Alerts log is a chronological record of the messages and errors, and includes the following items:

  -Any internal (ORA-00600), errors (ORA-01578) block and corruption blocking errors (ORA-00060) that occur

  - Administrative, operations such as CREATE, ALTER, and DROP statements and instructions STARTUP, SHUTDOWN and ARCHIVELOG

  -Messages and shared server process and dispatcher functions errors

  -The errors that occur when automatic refreshing a materialized view

  -The values of all initialization parameters that have default values at the time where the departure of the database and instance

  My question is about the second point (in bold).  I might be accused of not followed my journal to alert as closely as I should, but I have not noticed the CREATE/ALTER/DROP instructions in there.  I went to one of my test cases and created a table. No message was written for the journal of alerts.  I did a logfile switch just to make sure I was looking at the right file.  Yep - the switch is in the newspaper.  I dropped my test table - once again, no alert log entry was created.

  So my question is if the above is a documentation error or am miss me a piece of the puzzle?

  Hello

  It would really help if you posted a link to the document you are referencing, such as

  http://docs.Oracle.com/CD/B28359_01/server.111/b28310/monitoring001.htm#ADMIN11242

  The ball before the one you pointed out said «All the internal errors...» »

  The ball that you pointed out does not say "All", so I interpret that as meaning only some of the most remarkable commands CREATE, ALTER, and DROP are recorded, for example CREATE TABLESPACE or ALTER SYSTEM.

  Like you, I think that literature should be clearer on this point.

  Below is the article you cited, there is a link:

  http://docs.Oracle.com/CD/B28359_01/server.111/b28310/diag001.htm#CHDHEGBH

  which goes into a little more detail on this stuff is saved.  They are mostly all systemically important things, not things like creating a package, or editing a table individual users.  When the part you highlighted speaks of 'administrative operations, such as CREATE, ALTER, and DROP statements ', I think they're trying to distinguish certain types of CREATE, ALTER, and DROP statements, for example, things that only highly privileged users such as SYS or SYSTEM can do other, more frequent, CREATE, ALTER, and DROP statements.  Again, this is largely what I read in the literature, based on my experience.  Would be nice if the documentation is more explicit on this subject.

• play an animation and before moving on to a scene.

  Hello everyone, I'm new to Flash and I have a simple question:

  I created a game. Let's say I have a screen instructions and a game intro screen. The instructions screen has a back button that has a mouse more/click/out animation. I can get the mouse and more functionality, but so far all work that I could do when clicking the back button is to jump straight back to the intro of the game, without playing the animation click first. How to play the animation, and THEN go to a scene? Thank you. Here is my code in my "back" button symbol:

  import flash.events.MouseEvent;

  backButton.addEventListener (MouseEvent.MOUSE_OVER, handleMouseOver);

  backButton.addEventListener (MouseEvent.CLICK, handleMouseClick);

  backButton.addEventListener (MouseEvent.MOUSE_OUT, handleMouseOut);

  function handleMouseOver(e:MouseEvent) {}

  gotoAndPlay ("over")

  }

  function handleMouseClick(e:MouseEvent) {}

  gotoAndPlay ("click");

  }

  function handleMouseOut(e:MouseEvent) {}

  gotoAndPlay ("out")

  }

  On the Instructions maintimeline scene, here is my code:

  Stop();

  import flash.events.MouseEvent;

  backButton.addEventListener (MouseEvent.CLICK, handleBackClick)

  playButton.addEventListener (MouseEvent.CLICK, handlePlayClick)

  function handleBackClick(e:MouseEvent):void {}

  gotoAndplay (1, "Gameintro");

  }

  function handlePlayClick(e:MouseEvent):void {}

  gotoAndPlay (1, "Gameplay")

  }

  You need the call to the handleBackClick function to be triggered by the end of the animation of gotoAndPlay ("click"), is not clicking on it.

• New problem/bug when I put in and out of the points on a clip. Auto zoom unwanted in clip timeline.

  Game clips for log and set the scenes and out points I'll use later.  Something has changed with the new update and I think it's a bug.  When I hit the I and the keys O to set points on a clip before you drag the sequence, he zoomed in on the scenario of the clip.  I don't see the time line full clip unless I have to zoom out which is a pain at the time and repeatedly.  How can I get this back to how it was before?  It did not used to zoom in and out, it just marked your entry and exit point as he played leaving unchanged clip timeline.

  I use windows 7 with first Pro CC

  Hello

  Thanks for your post. I think you are using Premiere pro CS6 as the project option is included in the file menu and in the video there is an option of the project available and visible. Please update your CS6 with 6.0.5 last updated and the problem will be corrected. The link is provided below. Please update once the issue is resolved.

  http://www.Adobe.com/support/downloads/detail.jsp?ftpID=5631

  Kind regards

  Vinay

• 'In' and 'out' points while in the media browser (CS6)

  I saw a video about the PR - CS6, while displaying a clip in media browser (click and play, not the maquis of score), you can mark in and out points using 'I' and 'o' on the keyboard.

  The orange active zone will start and stop when selected.  'I' and 'o' are ignored when I try.  The whole clip is active (all the orange) without worrying.  'I' and 'o' work fine if I download the clip in the source monitor.

  Which is a setting somewhere?

  You can set In/Out points until a clip imported, so not in the media browser.  What you saw were clips in a bin in icon mode.