Air the fan runs all the time help please

Hello

my air fan macbookbook just Can not stop, its rotation at high speed that I can't use my laptop comfortably

I tried to reset the SMC, but did not work it runs fast even before the charging system

I've included screenshots of istat cpu and sensors please take a look

any help would be appreciated

Tags: Notebooks

Similar Questions

  • e7240 CONSTANT NOISE OF FAN NOISY / FAN RUNNING ALL THE TIME

    We received 2 nine E7240s directly from Dell, one for me and one for my colleague. As soon as I turned it on to build for my colleague, I noticed that the machine was overheating and the fan made a noise. Dell offers an upgrade of the BIOS that has not changed anything. They then changed the radiator, even once, that does not change and since then, they have changed the motherboard. My colleague went on vacation, so I don't know if the problem has been resolved, however, my laptop day you do not overheat (also of course as it has done for my colleague) BUT THE FAN RUNS ALL THE TIME. So much so that I think that the person in the room upstairs is using his hairdryer. Dell has replaced the heatsink of heat and the motherboard yesterday, I did the same update of the BIOS and the problem is even worse. As soon as I turn the thing, the fan runs all the time making a big noise. My predecessor was the E6500 and I was not bothered by noises, he did.

    The 7240 made so much noise that I want to throw it out the window , seriously, I go back to my old 5 years e6500, which is now very slow, I can not just take constant hair dryer of the fan noise! I'm waiting for Dell back to me, but I don't see what else they can do.

    I suspect a problem of design with newer models, someone with a laptop computer Latitude 13 also mentioned it on the Forum, someone else with an e7240 also said "I noticed the fan turns most of the time - it's quiet, but you don't know is spinning."  I just implemented, so the CPU is busy enough. "A person with the e6320 says"and the fan is noisy and turns far too often.

    I just bought a new Dell Latitude E7240 with Windows 7 laptop and had the same problem with overheating and the fan is running loudly all the time. I just fixed it on my laptop, it may not work for everyone but just in case I walked it here.

    The index for me was that the question has happened at home, not at work.

    • Using the Task Manager, I found that a "svchost.exe" process was always running at 25% of the CPU, i.e. to take 100% of one of the 4 hearts. For this you need view all processes, and that's why you need a local administrator account if she asks permission.
    • With right click on this process-online 'Go to services', you can study what services are hosted by this instance of svchost.
    • For each of these services, try to stop one at a time (if it helps) and see if the CPU usage goes down. For me, a clue was a service stuck on 'Stop' but never stopped.
    • The service which for me was the "HomeGroup provider." That's why the issue has happened at home and at work. The laptop had spotted my homegroup on my home network, but had not been able to accede. Maybe a problem with IPv6 that I could not turn on my desk.
    • In the Services tab in Task Manager, get on the service properties, which set to Disabled Startup Type.
    • Restart the laptop, to ensure that the service is stopped.

    That did the trick for me, and now the CPU remains less than 5% when idle. This isn't the problem that the fan is noisy when the CPU usage is high, but for me what rarely happens now.

    If you want to access files and printers on your home network without the homegroup feature, you can still do that the old way:

    • Network and sharing Center-Online avancΘs => Homegroup Connection-online 'use user accounts to connect to other computers.
    • Also in the settings advanced: enable discovery network. and Turn on File and Printer Sharing.
    • Then, you can click on your wifi network => add a printer.
    • If your office does not appear, click on "Not listed", then browse. As long as the network discovery and printer sharing are enabled, desktop PC should appear and you can connect using your local Windows user name and password.

    Hope this helps someone.

    Peter

  • The fan runs all the time because xinetd running more than 80% all the time.  Someone else has the same problem?

    xinetd is running at 83% or more 24 x 7 devours battery in 2 hours or less and making the fan run all the time.  I am connected to a bug report, and it turns out that it was a duplicate because someone else had the same problem.  However, I have no access to the other bug report or find anything either in the discussion forums or online.  Anyone experience this problem?

    Hello gorgonzola1111,

    I doubt that someone else has this problem because xinetd does not part of macOS. Have you installed it from a package of "ports" 3rd party?

  • Im running ADOBE CC 2015 on an iMac and Illustrator plant all the time when I try to use the save for web. I need to use this feature, all day and am frustrated of all accidents. Help, please.

    Im running ADOBE CC 2015 on an iMac and Illustrator plant all the time when I try to use the save for web. I need to use this feature, all day and am frustrated of all accidents. Help, please.

    Hello

    We have published a 19.0.1 hotfix that resolves this problem in discussion on this topic. Please apply the patch to your creative cloud application. The creative cloud application checks the update once a day, so you may see the update immediately.  If you want to force the check for an update at the beginning please logout and log back into the creative Cloud application.

    Link to 19.0.1 release notes: https://helpx.adobe.com/illustrator/kb/illustrator-cc-2015-crash-bug-fixes-19-0-1.html

    If you continue to see any questions send us an e-mail to [email protected]

    Kind regards

    Ashutosh

    The name of the Illustrator team engineering

  • I can't open all the Web sites in firefox(version 25), its long loading time, help please

    I can't open all the Web sites in firefox(version 25), its long loading time, help please

    Hello, normally these problems are caused by a security/firewall software which does not recognize and therefore blocks the new versions of firefox: solve connection problems to websites after Firefox update

  • I have an iphone 6 s running ios 9.2.1 my wifi disconnection and after a few seconds that it reconnects, it happens most of the time, help me thank you!

    I have an iPhone running iOS 9.2.1 6s my wifi suddenly disconnects, and after a few seconds that it reconnects, it happens most of the time help me thank you!

    It sounds like you have a fancy for your apple WIFI products name prefer digital alpha without space.

  • I reinstall xp on my toshiba laptop Dungeon wonders for SDBUS. SYS file that is not on the cd help please, I did once before without this problem

    I reinstall xp on my toshiba laptop Dungeon wonders for SDBUS. SYS file that is not on the cd help please, I did once before without this problem

    Please try to use different CD or simply remove the CD then insert again the installation request for the files.

  • Satellite Pro A120 - fan run all the time

    OK, so this is a strange...

    I have a satellite Pro A120. It works with the fan on all the time and sometimes goes on a mayor go slowly (which I think can be reduced to overheating).

    Operating system is Ubuntu and I installed the tool of sensors that tell me about the minute the temperature is 100 degrees c and the next one is 16!

    I suspect that it is perhaps that the heat sink is full of fluff, but I can't find a guide step by step to dismantle the machine, clean it and put it back together again.

    Can anyone help with ideas or resources?

    Thank you very much

    Nathan

    Hello

    You do not need to disassemble the unit to clean the fans.
    You can use a jet of compressed air which helps to remove dust.
    I did it several times and it helped!

    Try it!

  • Upgrade to Win 8.1 the fan runs all the time and Raw (Silkypix) converter consume 100% CPU resources

    Hi, after upgrading to win 8 to 8.1 win my converter (Silkypix) raw program running extremely slow and consuming 100% of CPU. VAIO all updates completed, all Win 8.1 updates made. ATM Radeon HD 7500 M / 7600M (Maj) with 2 GB RAM dedicated.

    In addition, the fan works almost all the time that was not the case with Win 8.

    Vaio SVE1712Z1EB with 8 GB of RAM, i7 processor execution.

    SeanQ, after some time looking for a solution I finally found it on one of the vaio sites forum: it is the Radeon driver that must be installed from the Vaio support site. NOT the driver the latest AMD site. It does not solve the problem.

    I did as follows: device, graphics card, Uninstall Manager. Did not help. Went to AMD in Program files. Setup.exe has begun, but instead of installation, clicked on uninstall. In this way, I uninstalled the driver former AMD and bad news from the site of AMD. I had to manually uninstall the driver in Device Manager, several times. Finally, I went to the site of Vaio and tried updating the driver. He failed. Reset. Manually start the update of the Vaio AMD driver. Finally it worked.

    The fan is now more or less normal speed.

    Overall, I spent 15 hours looking for this solution. How much is my time worth? Just joking, I'm happy that I found the solution.

  • Satellite R630 - fan runs all the time

    Hello everyone,

    I have a Satellite R630, and I'm happy with it. But there is one thing that makes me angry... the fan! It runs ALL the time. I browse a little... the fan works. I work with the office, or something... the fan works. To clarify: the CPU is not used, there is no heavy processes running, and the Notebook\CPU is cool. There is no reason why the fan should work, all the laptops that I had before where calm in the same situations. Of course it is not a problem if it starts working if necessary (a game, looking for a HD video or something). But not without reason!

    Someone at - it a solution for this problem? A tool to fix the fan speed\intervals manually, or better: an update of the bios (in the version 1.4 and 1.5 I can choose what I want... the fan did not stop execution). It is also quiet in Linux or any other operating system.

    @Toshiba: (!) Please do something. The only solution for me right now is to return the laptop to the store. :-(

    Best regards
    Imk82

    Hello

    Hmm... If you have already installed the latest BIOS updates, you should check the cooling of Windows Power management settings. Generally you can switch between different methods of cooling as you can read here:

    [How to handle power management features | http://aps2.toshiba-tro.de/kb0/HTD84026Q0000R01.htm]

  • On my Satellite P100-347 cooling fan runs all the time

    Hello

    I think I might have a problem with the fan on my Satellite P100-347. He seems to be constantly works constantly and is much stronger than when I bought the computer. Initially he just spent and if so, I think that this could now be wrong.
    Help, please.

    Hi Beata

    I agree with the suggestions of Sanremo; He s I don't known how old your laptop has but from time to time it of necessary to clean the cooling fans. Dust and debris inside the laptop could prevent the cooling modules work properly!
    The fresh air flow is also very important. Don't forget that there is enough free space around the laptop. Do not use the laptop on the lap or in the bed. In this case the laptop cannot be cooled in the right way and the high temperature can damage parts such as GPU to the Board of Directors.

    But if you think that there is a serious hardware problem you must contact the service provider authorized in your country.

    Good luck and greetings to Poland ;)

  • You will need to download the quicktime plugin to use the Blackboard for the school site. can not find the plug-in but downloaded real quick time. help please, thank you!

    Hello

    I need to download the quicktime plug-in to use certain features on the site, Blackboard, for school. Plugin cannot be found and I downloaded quicktime. Help, please.

    Thank you

    Kirsten

    The QuickTime plugin is part of the QuickTime multimedia player.

    See:

  • Fan runs all speed. CFPreferences could not connect to its demon.

    The fan of my MacBook Pro suddenly began to run all speeds, something it has never done before

    and it is in mode 'sleep'.

    I checked the Console and the activity monitor is

    Nothing special in the activity monitor is

    In the Console, there is something that keeps repeating

    (com.hp.devicemonitor [438]) LaunchServices returns a URL bundle which does not correspond to the known association of the LoginItem.

    and

    CFPreferences could not connect to its demon. Preferences by using the connection 0 x 0 will be volatile and will not be persisted to disk.

    Only by restarting the computer could not stop the fan

    Off the MBP fan stopped to run

    I ran the recovery disc to see if something was wrong but nothing

    What is going on? Should I be worried?

    Try a SMC reset:

    https://support.Apple.com/en-us/HT201295

    If no success, run an Apple Hardware Test:

    https://support.Apple.com/en-us/HT201257

    Note that an error free AHT is not final.

    Ciao.

  • Windows will not start since the update :( Help, please

    Windows could not start. a recent hardware or software change might be the problem

    file\windows\system32\config\system
    status: 0xc00000e9

    When I try to start the system restart that nothing happens

    When I try to restore the computer to factory settings it says that the necessary files are not there.

    My computer was working fine until I installed an automatic update from microsoft. Help, please

    For any problem with the recovery of software/process to factory settings, you will need to contact the manufacturer of your computer.
    This isn't their recovery process, Microsoft.

    Windows Update Forum:

    You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

    http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

    When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

    In this way, you will receive the best help.

    See you soon.

    Mick Murphy - Microsoft partner

  • Remove a calendar of WLM and lost all information. Help, please.

    I had a list of calendars in WLM.  After the migration, one a few years ago, I always had two elements that says Original Calendar.  I deleted one of these calendars "Originals", which seemed to have virtually nothing in it and all appointments are gone!

    I tried to do a system restore.  I looked on here where someone said to use the button CANCEL.  I see not a button CANCEL anywhere.

    Help, please.

    Thank you

    Karen

    Hello

    I suggest you post your questions in the Windows Live forum, since the question is related to the calendars in Windows Live Mail.

    Here is the link: http://windowslivehelp.com/product.aspx?productid=15

Maybe you are looking for