Alarm and timer does not iOS 6 s 10

Similar Questions

• The date and time does not work.

  I have an iphone 5 c.

  The date and time does not work. This is the second time.  The first time was about 3 to 4 months again and now again after upgrade to iOs9.3.1.

  Even after trying to change it manually, time slows down or stops.

  Everyone has problems with their date and time?

  • Try a forced reboot: hold down the House and on the buttons until the unit turns off. Ignore the cursor off if it appears. Once completed, if it does not start on it own, turn off power with the key On. In some cases, it also contributes to double click the Home button and close all applications before restarting.
  • Restore factory settings (no backup)
  • Make an appointment at your local Apple store to have it checked.

• Automatically set to the Date and time does not

  Date and time settings on my iPad Air set them automatically does not work? When I turn it out it will allow me to choose a city (Knoxville).

  When I turn it on with (location settings) it just turns and turns?

  Any ideas?

  Hello and welcome to Apple Support communities,

  This problem may be caused by a number of things, most often the cause is the device not being able to contact the time server. Here are the instructions from Apple supported for this problem, as well as a link to the appropriate article.

  Follow these steps, after each step:

  1. Make sure you have the latest version of iOS.
  2. Automatically turn on set in settings > general > Date & time. This will automatically put your date and time based on your time zone.
  3. Make sure that your time zone is set correctly. Tap Settings > general > Date & time > time zone.

  If you still have any questions affecting your date, time, or time zone, you can automatically disable in the settings > general > Date & time and manually set the time and time zone. Or contact your carrier.

  The option to enable the value automatically may not be available in all countries or all shells.

  If the time on your iOS device does not go after a sync with your computer, the computer may be time wrong. Check the time on your computer in system preferences > Date & time. You can select "Set date and time automatically."

  Support the Article HT203483

  Get help with the date and time on your iPhone, iPad and iPod touch - Apple Support

  Of course, if the time of your carrier server cannot connect the other option is to manually set the date and time until the carrier server are again available.

  Hope you helps out.

  Kind regards

  Peter.

• 'RT Set date and time' does not define the UTC seconds

  Hallo,

  I tried to set the time on my cRio 9012 with the function settimeUTC which is used by the vi "the Date and time value. But the second I get home are ADDED to the current time and not defined as the new value.

  Even the vi illustrates this behavior: I've set up a vi time where in a loop (100ms delay) and reread. When I put in local time stop the clock (as expected), but when I put the UTC time the Dungeon seconds on the run...

  Can someone help me with this problem?

  Thank you

  Florian

  Hi Florian.

  After posting your version of LabVIEW, I found an answer to your question:

  The behavior you're seeing is a known bug that has been fixed in LabVIEW 8.5.1. Workaround is to use set local time instead.

  Let me know if you have any other questions.

• The computer's date and time does not change automatically

  I use WinsXP and have a problem with the clock at the bottom right. Every time I have on my computer the date & time is always 01/01/2005 12:00... Whenever I have to correct... Can you pls help me on how to solve this problem, because if the time if wrong my antivirus doesn't work...

  Original title: frustrating problem...

  You are in desperate need of a CMOS battery.  Read the manual or conteact the Lim for directions on how to replace it.

• EL Capitan automatic date time does not work

  People

  I use an El Capitan 10.11.5 MacBook Air version.

  I noticed that the data and time does not work even though it was set to auto to time.asia.apple.com.

  I ran these commands on a terminal

  $ping-c 5 time.asia.apple.com

  Ping: impossible to solve the time.asia.apple.com: Unknown host

  $ping-c 5 time.nist.gov

  PING ntp1.glb.nist.gov (64.113.32.5): 56 bytes

  64 bytes from 64.113.32.5: icmp_seq = 0 ttl = time 44 = 386,629 ms

  64 bytes from 64.113.32.5: icmp_seq = 1 ttl = time 44 = 307,532 ms

  tell me ping works but not for the server ntp - time.asia.apple.com

  $nslookup time.asia.apple.com

  Server: 192.168.1.254 address: 192.168.1.254 #53

  Non-authoritative answer: time.asia.apple.com canonical name = time - ios.g.aaplimg.com.

  time - ios.g.aaplimg.com canonical name = site time.apple.com.

  Site Time.Apple.com canonical name = time - osx.g.aaplimg.com

  $cat /etc/ntp.conf

  Server time.asia.apple.com.

  $ ntpq Pei

  No returned ID association

  Please, back up all data.

  Open the window of network preferences, if necessary, by clicking on the padlock icon in the lower left corner and entering your password. Cllck advanced, open the DNS tab and change the addresses of the servers as follows:

  8.8.8.8

  8.8.4.4

  It's Google DNS. Click OK, and then apply.

  In Safari, select

  ▹ Safari preferences... ▹ Confidentiality ▹ Remove All site data

  and confirm. If you use another browser, clear the cache memory. Test. Any difference?

  Notes:

  1. If you lose Internet access after the above change is made to your network settings, remove the Google servers in the network preferences pane, then click on the TCP/IP tab, then click on renew the DHCP lease. That should restore the original DNS settings; otherwise restore them yourself. Remember that you must click on apply so that the changes take effect.

  2. I do not use Google DNS myself, but I tested it, and I do not recommend it or any other provider DNS; the addresses of the servers are only available for testing purposes. There may be privacy and technical issues involved in the use of this service, that you should personally study before deciding whether to retain the settings. Other public DNS services exist.

• I just recently upgraded to OS El Capitan.  Now, none of my movies to quicktime does not work.  I have the old version of Quick time 7 and it does not work either.  They do not convert.  Help?

  I just recently upgraded to OS El Capitan.  Now, none of my movies to quicktime does not work.  I have the old version of Quick time 7 and it does not work either.  They do not convert.  Help?

  VLC will play them?

  http://www.videolan.org/

• Face time does not work since this morning if my wifi connection is fine and parameters also very well.

  IPhone 6, 114 GB, GB 72.6 available capacity. iOS 9.3.1

  Face time does not work since this morning. Connection Wi - Fi works very well

  Mamimisra wrote:

  IPhone 6, 114 GB, GB 72.6 available capacity. iOS 9.3.1

  Face time does not work since this morning. Connection Wi - Fi works very well

  https://support.Apple.com/en-us/HT204168

• "Show my windows and tabs from last time ' does not work in version 3.6.8

  I select "show my windows and tabs from last time ' on the Options window - Panel general"when firefox starts", but it opens as my home page every time I start firefox.

  I tried this on two different computers. Both of them have the same problem.

  It worked fine in previous versions, but it does not work in version 3.6.8.

  If you use delete, search and download Firefox browsing history in Firefox 3.5 and later versions to clear the 'browsing history' the closing of Firefox then in restaurant tabs in the last session ("Save and exit" or "show my windows and tabs from last time ') does not work.

• Computer is very slow and IE does not work all the time.

  I bought a computer from my old employeer.  He is doing all sorts of things, or should I say not to do all sorts of things.  It is very slow and IE does not work all the time.  They have questions arise and ask if the administrator oks things and other things like that.  It came with any disks.  I would like to wipe, clean and load a new disc, but I don't know where to find the disc or if I can do it.   Can someone please?

  Hello

  Proceed as follows to contribute to these two questions. You can probably buy the disks of Vista machine to system or get
  the former employer to do it for you if necessary.

  Try these and it can also be a good idea to update your main drivers later. The General corruption can also play a
  role in this issue. And even the TCP/IP stack might need to be refreshed.

  What antivirus/antispyware/security products do you have on the machine? Be one you ALREADY had on this
  machine, including those you have uninstalled (they leave leftovers behind which can cause strange problems).

  If no joy there's something blocking perhaps.

  Start - All Programs - Accessories - System Tools - IE with no Addons - what works best?

  IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

  IE - Tools - Internet Options - Security tab - click on reset all default areas - apply / OK

  Close and restart IE or IE with no addons

  not better?

  IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
  "(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.

  Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
  are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.

  Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
  are bad, but some can cause your question (toolbars are BHO).
  http://securityxploded.com/bhoremover.php

  Startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Also get Malwarebytes - free - use as scanner only.

  http://www.Malwarebytes.org/

  --------------------------------

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  --------------------

  Departure - in the search box, type-> order

  at the top of the list to find COMMAND - CLICK RIGHT to it - RUN AS ADMIN

  Type the following commands (or copy and paste one at a time), each followed by pressing on enter.

  ipconfig/flushdns

  nbtstat-r

  nbtstat - RR

  netsh int Reinitialis

  netsh int ip reset

  netsh winsock reset

  RESET

  That resets your TCP/IP stack

  --------------------------------

  Maybe need of these:

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• I use creative cloud of Adobe Premiere Pro and it does not allow me to drag. In the line of time, only the audio files of the video MXF files. Plays in the video source, but does not allow me to change on the time line with the. MXF files.

  I use creative cloud of Adobe Premiere Pro and it does not allow me to drag. In the line of time, only the audio files of the video MXF files. Video plays in the source window, but does not to drag me and thenedit on the time line with the. MXF files. audio will slide to the time line, but not the video. Interestingly, not later than end of December 2015 it allowed me to change with .mxf files, but no, it won't. Any help out there?

  Neil, get it fixed, I do not have the video channels set correctly on the left

  side of the line of the time. Learn the new adobe; Thank you

  Monday, February 15, 2016 13:20, R Neil Haugen [email protected]>

• Cloud to adobe InDesign download fails with shoing error it can not extract the files in the temporary file.  I tried several times and restarted does not.  What can I do about it?

  Cloud to adobe InDesign download fails with shoing error it can not extract the files in the temporary file.  I tried several times and restarted does not.  What can I do about it?

  To refer to EX11 some:

  Creative cloud (WIP) error codes | Error postal codes of Mylenium

  Mylenium

• Tap to talk time does not work on my watch

  Hey guys!

  Tap to talk time does not work on my watch.

  I know that his works only with Mickey/minnie.

  the watch is after unpari/pair, the "tap to speek" function is enabled (on the iphone and the watch)

  both are updated to the latest ios/watch OS and still...

  any ideas...?

  Thank you!

  Return on investment

  Hi King

  I suggest to wait until a few hours, leaving the face of Mickey or Minnie Mouse selected on your watch.

  My own experience (tested on two watches) is that the feature became available after waiting, without rebooting or unpairing / rematching of the watch. In one case, it took somewhere 3-5 hours, but you can see that the function starts working sooner than that.

  It can help to first turn the tap to set the time to stop, pause for a few moments and then turn it back on again.

• Bought two of the iTouch, one for my wife and one for me. In the Notes his has the "" symbol for the formatting and mine does not work. Any suggestions?

  I bought the iTouch two at a time, one for my wife and one for me. In the application 'Notes' my wife shows the symbol "+" to the formatting and mine does not work. Any suggestion.

  Could you please include screenshots of the so-called issue?

• Twitter and Tumblr does not properly render text.

  Image here: http://i.imgur.com/FtK6K.jpg

  Tried the usual troubleshooting. When you change the page to 'Style No.' style - the text appears.

  Manually disable all addons and plugins does not solve the problem, but when using Firefox in safe mode, the text looks in good condition.

  Change the character encoding does not lighten the question.
  Running windows 7 x 64 with the latest updates and the latest firefox.

  Chrome displays fine twitter and tumblr.

  Great success. I uncheked acceleration hardware and started this time and displays it text, though a bit weird. I tried this earlier, so I think that the graphics driver fixed something... Here is a screenshot: http://i.imgur.com/Jw4Vk.jpg

  Does go I have to make sure hardware acceleration is turned off? Are there negative effects to this?