EL Capitan automatic date time does not work

Similar Questions

• The date and time does not work.

  I have an iphone 5 c.

  The date and time does not work. This is the second time.  The first time was about 3 to 4 months again and now again after upgrade to iOs9.3.1.

  Even after trying to change it manually, time slows down or stops.

  Everyone has problems with their date and time?

  • Try a forced reboot: hold down the House and on the buttons until the unit turns off. Ignore the cursor off if it appears. Once completed, if it does not start on it own, turn off power with the key On. In some cases, it also contributes to double click the Home button and close all applications before restarting.
  • Restore factory settings (no backup)
  • Make an appointment at your local Apple store to have it checked.

• Tap to talk time does not work on my watch

  Hey guys!

  Tap to talk time does not work on my watch.

  I know that his works only with Mickey/minnie.

  the watch is after unpari/pair, the "tap to speek" function is enabled (on the iphone and the watch)

  both are updated to the latest ios/watch OS and still...

  any ideas...?

  Thank you!

  Return on investment

  Hi King

  I suggest to wait until a few hours, leaving the face of Mickey or Minnie Mouse selected on your watch.

  My own experience (tested on two watches) is that the feature became available after waiting, without rebooting or unpairing / rematching of the watch. In one case, it took somewhere 3-5 hours, but you can see that the function starts working sooner than that.

  It can help to first turn the tap to set the time to stop, pause for a few moments and then turn it back on again.

• I've just updated to el capitan. But protools does not work. How can I fix it?

  I've just updated to el capitan. But protools does not work. How can I fix it?

  Probably that Protools must be made day/upgrade. Have you checked for updates/upgrades?

  What version of Protools do you use?

• Face time does not work since this morning if my wifi connection is fine and parameters also very well.

  IPhone 6, 114 GB, GB 72.6 available capacity. iOS 9.3.1

  Face time does not work since this morning. Connection Wi - Fi works very well

  Mamimisra wrote:

  IPhone 6, 114 GB, GB 72.6 available capacity. iOS 9.3.1

  Face time does not work since this morning. Connection Wi - Fi works very well

  https://support.Apple.com/en-us/HT204168

• "Show my windows and tabs from last time ' does not work in version 3.6.8

  I select "show my windows and tabs from last time ' on the Options window - Panel general"when firefox starts", but it opens as my home page every time I start firefox.

  I tried this on two different computers. Both of them have the same problem.

  It worked fine in previous versions, but it does not work in version 3.6.8.

  If you use delete, search and download Firefox browsing history in Firefox 3.5 and later versions to clear the 'browsing history' the closing of Firefox then in restaurant tabs in the last session ("Save and exit" or "show my windows and tabs from last time ') does not work.

• Family timer does not work for Windows 8

  I can view the activity report and check the websites visited, but everything doesn't seem to work properly.  The time settings and the curfew does not work and when I view the reports using pc is far from what is used.

  Hello

  I would like to you can check this post about delays on parental control. Refer to the post of Eugene_R.

  Time does not

  Moreover, in a resolution of the initial problem, I suggest that reconfigure you the account user. Here's how:

  In Windows 8, you can use accounts of Microsoft as a user. You just link the Microsoft e-mail account to the new standard user. Follow these steps:

  Note: Make sure that you have an internet connection to create a user with a Microsoft account.

  1. press Windows key on your keyboard to access the applications screen.

  2. tap create an account (you will be redirected to search application screen automatically).

  3. click on settings (second option with the gear icon).

  4. click on create an account on the selection to the left pane. (You may be prompted for access admin select an admin user, and then enter the administrator password).

  5. in the account management window, click Add a user account.

  6. you will be prompted to add a user, enter the Microsoft account email address in the text box then click on Next.

  7. check This is a child account? Turn on family safety for PC usage reports.

  8. click on Finish.

  After you create the child account, you can then go to the Family Safety website, log in using the parent account and then manage restrictions and control of your child options.

  Second: In case you want your child free of any restriction which actually an adult account, you will need to just make sure that he or she is not a member of the safety of your family to check on the Family Safety website. To remove a child, go to manage the list of the members of the family. Select the account you want to delete by checking the box on the right, click on remove, then confirm by clicking on remove again.

  In case you have problems after deleting the account as a child, please update the personal data of the account by connecting to https://account.live.com/summarypage.aspx.

  Note: If you are currently logged in using your account, you must open a session and re-enter your child's account.

  Thank you.

• FYI: El Capitan upgrade - Epson scanner does not work

  Re: iMac 27 "(mid-2010) - I thought I'd share the solution to my problem."

  With Yosemite and with my 12 year old Epson Perfection 3200 Photo scanner worked great! I accessed use Apple's Image Capture utility. After having recently upgraded to El Capitan, Capture of Image could not see my scanner. After removing preferences to Epson, the upgrade - by Epson online - driver and image transfer, checking all cables and restart several times - it STILL does not work. IC saw nothing.

  After getting technical support of Apple FREE chat and many hours of troubleshooting on mine the day before. Apple, suggested ideas, I have call Epson. I did - they have FREE phone technical support! After new check a bunch of stuff, Epson technology offers I have try the USB - cable I was using FireWire. The USB cable is specialized whose end is atypical goes to the back of the scanner - I have had the chance to quickly find, after be hidden away for years. Well, after only a few attempts, the USB key worked! I can now scan again - to no longer use the FireWire cable.

  I hope this helps someone.

  Thank you Harry for your comment.

  I had the same problem that is now resolved by the way you suggested.

  Best wishes

  PaliPali

• Toshiba 40TL838 - sleep timer does not work or works sometimes

  Hello

  I bought 40TL838 TV
  and I have problem with sleep clock

  does not work or works sometimes
  but usually, you see on the screen a minute left and TV never turn off

  I try to change the language and also options the system reset does not help

  and updated firmware is up to date

  any suggestion or help please

  I do not know if you are on the right forum because this forum is for Toshiba computers but let's see if anyone with the same device can help m.

  I put t know what the problem is here, but how it works you can read on page 48 in manuals s document.

  By the way: have you tried to contact Toshiba hotline and ask for help?

• Restore not working - the option to restore on my machine does not work. I've highlighted the dates. Does not work in safe mode

  Original title: restoration works not

  The weight restoration on my machine does not work. I've highlighted the dates but I get... impossible to restore messages. I tried switching off my virus checker (Norton) but with the same result.

  Some tools Anti Virus 'protect' your system so that they will not allow a restore of the system work properly.
  For example, if you use Norton/Symantec products, you will see a message like this:
  Restoration incomplete. Your computer cannot be restored...
  It is also a popular Symantec problem (well, I'll be polite and call an "undocumented feature"...), they wrote an article about it:
  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013
  According to what you use for malware protection, you may need to disable the product temporarily, do the system restore and then turn the products light up again when the system restore is complete.
  Sometimes you need start your system in Mode safe and so that your protection programs are not running, and then do the system restore.

  Tips from Microsoft in some of their articles that if the system restore does not restore your computer, start in Safe Mode, and then run the system restore.

  It works for some configurations.

• Class Timer does not work

  I needed a periodic showStatus funcation and read the setInterval docs where he suggests to use the Timer class instead.

  I gave it a try, it won't work. However, setInterval works

  Compiled with flex sdk "Version 3.3.0 build 4852.

  The player comments send me to http://www.Adobe.com/software/Flash/about/ which indicates that "you have the version installed in 10,0,32,18"

  Here is the code with setInterval enabeld (works) just comment this line and uncomment the section that uses a top clock to test the other case.

  package
  {
  import flash.display.Sprite;
  import flash.text.TextField;
  import flash.utils.setInterval;
  import flash.utils.Timer;
  import flash.events.TimerEvent;
  import flash.events.Event;

  SerializableAttribute public class Main extends Sprite
  {
  private var statusLine:TextField;
  private var statusText:String = "";
  private var statusTimer:Timer;
  private var timerStep:Number = 100;
  private var elapsedTime:Number = 0;

  public void Main()
  {
  statusLine = new TextField();
  statusLine.width = 400;
  statusLine.height = 400;
  statusLine.multiline = true;
  statusLine.wordWrap = true;
  statusLine.text = "start";
  addChild (statusLine);

  NOTE: Adobe livedocs for setInterval says:
  "Instead of using the setInterval() method, consider creating
  a Timer object, with the specified interval... »
  statusTimer = new Timer(timerStep,0);
  statusTimer.addEventListener ("timer", showStatus); A single sample it shows this way
  statusTimer.addEventListener (TimerEvent.TIMER, showStatus); The other sample reads
  statusTimer.start ();

  except that it does not work! stick with setInterval() for now
  setInterval (showStatus, timerStep);
  }

  private void showStatus (): void
  {
  var txt:String = "";

  elapsedTime += timerStep;

  txt += ">" + Math.round(elapsedTime/100)/10 + "."; "

  statusLine.text = txt;
  }
  }
  }

  Hello

  Once again, check the following Code. his work

  package {}

  import flash.display.Sprite;

  import flash.events.TimerEvent;

  import flash.text.TextField;

  import flash.utils.Timer;

  SerializableAttribute public class TestTimer extends Sprite

  {

  private var statusLine:TextField;

  private var statusText:String = "";

  private var statusTimer:Timer;

  private var timerStep:Number = 100;

  private var elapsedTime:Number = 0;

  private var count: int = 0;

  public void TestTimer()

  {

  statusLine = new TextField();

  statusLine.width = 400;

  statusLine.height = 400;

  statusLine.multiline = true;

  statusLine.wordWrap = true;

  statusLine.text = "start";

  addChild (statusLine);

  statusTimer = new Timer (100);

  statusTimer.addEventListener (TimerEvent.TIMER, fireTimer);

  statusTimer.start ();

  }

  private void fireTimer(event:TimerEvent):void

  {

  statusLine.text = "timer"+ counter fired;

  counter ++;

  }

  }

  }

• Automatic shutdown of the time does not work. I got him to turn off the computer at 23:00 and it doesn't. Help!

  It's not I the children side to turn off the computer at 23:00.  They are not allowed to use the computer after that but it does not turn off as before.

  Hello

  1 did you changes to the computer before the show?

  2. are you referring to Parental control?

  Method 1: Read the following article and try to set the parental control again and see if that helps.

  Control when children can use the computer:

  http://Windows.Microsoft.com/en-us/Windows7/control-when-children-can-use-the-computer

  You can also check:

  Set up Parental controls:

  http://Windows.Microsoft.com/en-us/Windows7/set-up-parental-controls

  Method 2: Restore the computer to a date when it was working fine.

  Reference:

  System Restore: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

   

• Data hold does not work after changing time system

  Hi guys,.

  I configured Oracle Data Guard successfully between a primary database and a database physical standby.

  Later, I changed the date and time in the two servers at the level of the BONE (from 14 - Sep to the 13 sept). The time is the same on both servers, but it has been changed. Then, I created a test table in the primary database, but I see not in the database of relief, well that configuration sounds good.

  Could you please explain?

  It is 11.2.0.1.0 - 64 bit Linux.

  Here is the code:

  In the primary:

  SQL > select sysdate to double;

  SYSDATE

  ---------

  13-SEVEN.-15

  SQL > desc hr.test

  Name                                      Null?    Type

  ----------------------------------------- -------- ----------------------------

  A                                                  NUMBER

  B                                                  VARCHAR2(10)

  In the database backup:

  SELECT SEQUENCE #, APPLIED, FIRST_TIME NEXT_TIME

  FROM V$ ARCHIVED_LOG BY SEQUENCE #.

  SQL > 2

  SEQUENCE # FIRST_TIM NEXT_TIME APPLIED

  ---------- --------- --------- ---------

  232 06-06-SEPT.-15-15-SEP YES

  233 06-06-SEPT.-15-15-SEP YES

  ..

  ..

  261 14-14-SEPT.-15-15-SEP YES

  262 14-14-SEPT.-15-15-SEP YES <-here it shows the old date

  31 selected lines.

  SQL > desc hr.test

  ERROR:

  ORA-04043: hr.test of the object does not exist

  In the primary db:

  SQL > alter system switch logfile;

  Modified system.

  
  

  Pending:

  SQL > SELECT SEQUENCE #, APPLIED, FIRST_TIME NEXT_TIME

  FROM V$ ARCHIVED_LOG BY SEQUENCE #.  2

  SEQUENCE # FIRST_TIM NEXT_TIME APPLIED

  ---------- --------- --------- ---------

  263 13-14-SEPT.-15-15-SEP YES

  264 13-13-SEPT.-15-15-SEP YES <-new date shows fine here

  265 13-13-SEPT.-15-15-SEP YES

  266 IN-MEMORY, 13 SEPT. 13. - 15-SEPT-15

  35 selected lines.

  
  

  SQL > desc hr.test

  ERROR:

  ORA-04043: hr.test of the object does not exist

  Hello

  You can check availability using v$ view dataguard_status.

  You can make a request on a user table at the backup site if the standby instance is in recovery mode.

  to check your test table, you must stop the recovery mode and start in read-only mode

  Cancel log apply services:

  SQL > ALTER DATABASE RECOVER MANAGED STANDBY DATABASE CANCEL;

  Open the database for read-only access:

  SQL > ALTER DATABASE OPEN READ-ONLY.

  Then you can query your table test.

  Concerning

• Smartphones blackBerry 9900 data Plan does not work!

  Hi, new here, great site!

  I'm from Canada, with Koodo and bought a unlocked 9900 opportunity, my neighbor via a Classifieds site, and as much as I know it was his business phone.
  I wiped it it clean and improved the operating system to 7.01

  I noticed that the previous service logo remains still (Rogers) during boot-up/shutdown, hmm, OK whatever he is working with Koodo.

  I called Koodo to allow data, but nothing works. I called them and they told me to enter "bb.koodo.com" in the APN field with no username and password. Then to save the host Routing Table (he told me that he registered very well) but I did not receive a message. Also, we have removed battery and tried everything again. It still does not.

  It is H + at the top right of the screen, but who has always been there.

  She said that maybe the phone was restriction IP since I bought it used, and maybe BB Swiss Army tool could help me get off, but she didn't know how. So I downloaded and pushed some buttons (more precisely remove COD) and really messed up my phone... lol

  Just reinstalled OS7.01 once again and fortunately had a fairly recent backup.

  Suggestions for making data work, or do I need a new phone?

  Hello and welcome to the community!

  Serious9900 wrote:

  bought an unlocked 9900 used my neighbor via a Classifieds site, and AFAIK it was his business phone.

  Let's start there, because who can be tricky depending on what exactly is meant by "business phone". Reference:

  • Article ID: KB05099 Steps to take before selling or after the purchase of a used BlackBerry smartphone

  Many of the steps can only be carried out by the seller... for example, if the prior carrier still has a BIS account allocated to that specific device, so no other carrier will be able to create a BIS account for her, and a BIS account is required to use wisely. As a general rule, a carrier will come out only the BB from the account when the real account holder made the request... and you will not if this situation applies.

  In addition, if the device has been activated BES, you need to follow additional steps. Reference:

  • Article ID: KB30076 How to check for an it on a BlackBerry smartphone policy

  If there is an IT strategy, then there are a special method, you need to remove it, but it will be successful if the BES server, to which the device has been set already has the removed feature of it... you may need to ask the previous owner about it. If this BES server was deleted, you can use this method to clean up the it policy:

  • Article ID: KB31291 How to reset a BlackBerry smartphone to factory using BlackBerry Desktop Software Settings

  It is necessary to use this exact method... refer:

  • Article ID: KB16307 Actions performed by the BlackBerry smartphone during the removal of the user stored and application data

  Now, with all these preliminaries of the road...

  Serious9900 wrote:

  I noticed that the previous service logo remains still (Rogers) during boot-up/shutdown, hmm, OK whatever he is working with Koodo.

  As you guessed, it's irrelevant. BBs are still originally designed for a specific carrier... and some of these contractual carriers with BB to place a splash screen of starting the device ROM, that can never be changed. But, it does nothing other that that unit was built for this carrier... but as long as all other things correctly, it is not serious at all.

  But, to be clear, when you say "it works on Koodo", I guess that's your voice services? And are all now, you must operate your data services? If telephone services do not work correctly on Koodo, then it is useless trying to get data services going.

  Serious9900 wrote:

  I called Koodo to allow data, but nothing works. I called them and they told me to enter "bb.koodo.com" in the APN field with no username and password. Then to save the host Routing Table (he told me that he registered very well) but I did not receive a message. Also, we have removed battery and tried everything again. It still does not.

  But now say you "nothing works"... should I continue to assume this are information specific to the data, and that telephone services continue to operate properly on Koodo? Sorry for being blunt, but clarity is critical or waste us time on unnecessary things.

  When you say "he told me that he registered very well", which means exactly please? This means that he said something like 'Check pending', 'Record sent' or some other message popup? Once again, here the clarity is critical. If that's what you saw, then indeed it is not registered correctly. Rather, he made the application very well... but until the enrollment message arrives in the Messages application, then the intervention is required since the data network of the carrier did not and until it nothing for the data will be working.

  Serious9900 wrote:

  It is H + at the top right of the screen, but who has always been there.

  Upper case H +? Once again, just double check, since if she was tiny, that it would mean something completely different from that of capital letters. Top of case, this is what it must be.

  Serious9900 wrote:

  She said that perhaps the phone restriction IP since I bought it used

  I don't know what she thought about it. May be restriction of BES and if the above process I gave you can purify that.

  Serious9900 wrote:
  and that maybe BB Swiss Army tool could help me to remove, but she didn't know how. So I downloaded and pushed some buttons (more precisely remove COD) and really messed up my phone... lol

  Never good to a few buttons when you don't know what you do... I don't remember if BBSAK is able to remove political or not, but it can do a very good cleaning.

  Serious9900 wrote:

  Just reinstalled OS7.01 once again and fortunately had a fairly recent backup.

  And that could be part of your problems. If, for example, the device has one IT political edge, while part of a full process... which means that even if you happen to clean off, a complete restoration simply will return to the instrument, turning to your right back to where you started backup/restore. Instead, to do only a partial backup or restore, and more precisely to avoid data bases that have to do with THIS, political, business or something similar... the conservative approach is to only to backup/restore of critical databases you need (for example, contacts, calendar) and manually reconfigure the rest. Remove a policy is a tricky thing.

  Serious9900 wrote:

  Suggestions for making data work, or do I need a new phone?

  I think you have enough to start on top. Another question about whether Koodo, however, is if their network is configured to auto-fill your specific with entries HRT device model and service book. If their network is not, while actually explains everything. No carriers configure their network to support all models of BB... each one chooses a subset of the model numbers of BB and configure their network accordingly. But trying to use a model number BB on a carrier network that is NOT configured for this model results in number exactly what you live... their network will not automatically grow some HRT and SB entries on your device because their network does not recognize your device as a model BB number taken in charge.

  Looking at a reference that I can find, it seems that Koodo is configured for the 9360, 9300, 8530 and 9790. But not for the 9900. Now, is that with a proverbial grain of salt... that reference does not necessarily mean that the network of Koodo is not configured for the 9900, it's just an indicator that is not. Koodo can only tell you that answer for you.

  Good luck and let us know!

• Why my "display windows and tabs from last time ' does not work?

  Hi all

  I used to have my settings set to "display windows and tabs from last time." For some reason, it does not. Whenever I close my tabs, Firefox warns you me I close many tabs, and when I reopen it Firefox, I only get my home page.

  In the menu options, I put 'windows and tabs from last time' options, and in private life, I have "Firefox will remember history", so I do not think it is related to my settings.

  I saw a thread on 'browser.sessionstore.enabled' must be true about: config, but I don't have even a name preference that says "browser.sessionstore.enabled. Maybe that's the problem? If so, I have NO IDEA how to fix this. I only am not at all computer savvy.

  If someone could find a solution to this very annoying problem, I would be very grateful. If it takes a lot of work of programming/techno, please be VERY descriptive (pretend I'm a 5 year old child in giving directions).

  Thank you!

  Browser.sessionstore.Enabled is no longer used, worry not if you can't find it.

  In case you use "clear history of Firefox closing:

  • do not erase browsing history – which will prevent the restoration of the work session.
  • Tools > Options > privacy > Firefox will be: "Use the custom settings for history": [X] 'Clear history of Firefox closing' > settings
  • https://support.Mozilla.org/KB/remove-recent-browsing-search-and-download-history

  Note that compensation "Preferences of Site" clears all exceptions for cookies, images, pop-up windows, installation of software, passwords, and other specific data from Web site.

  Deletion of cookies will delete all specified (selected) cookies, including cookies with an exception allowing you want to keep.

  You can check the prefs of . browser.sessionstore * including browser.sessionstore.resume_from_crash on the topic: config page and reset the browser.sessionstore prefs that are correct (in bold) user via the context menu in the default value to make sure that the Session Restore is enabled and functional.

  • http://KB.mozillazine.org/Session_Restore