Alert does not work

Similar Questions

• The background thread alert does not work

  Hello

  I have read the article http://www.blackberry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/800505/800608/... and followed the instructions to display the background thread alert. However, the alert is not displayed and IU locks (freezes). Specifically, the event of click/touch does not work, but the background thread continues to run.

  Structure of my program. The main class (with the main function) extends UiApplication. I create in the function main instance of the class that extends the Application. This class starts backgorund wire. I am missing something or making the wrong way?

  Sorry I have expired, I was going to write a long response to this.

  But in short, remember that your automatic boot process and your user interface process, both through main with different parameters and are the BlackBerry is concerned, different applications.  So it may be an Application, the other can be a UiApplication, and both can enterTheDispatcher.

  No two instances of the same Application, they are two different Applications.  They can be of different instances of the same Application class, but it is a special case.  It depends on what you create in the main routine.

  You can play a merry dance with such things.  For example, having a UiApplication be started by the automatic boot process, and then the boot gui process can find it and just put in the foreground, rather than creating a new UiApplication.

  Generally however people create a request and a UiApplication.  The problem with the use of these different applications, is that things like static are not shared.  Therefore, use something like RuntimeStore to share data.  It is a pain and something that if I can avoid.

  It is perfectly possible to have a UiApplication, which starts when the device starts, runs Background Threads that are working in a network and is bought in the foreground by clicking on an icon.  Code is more complicated, but not much.  And you must have complicated the code when you run the network Threads background to deal with the unit off power and then power anyway.

  Hope that clarifies somethings.

• event alert does not work

  Hi all

  I do an event alert then I do insert into the table, it does not, whereas when I changed for the periodical it works fine.

  can any body help

  Hi PK,.

  I tried too in my test case,

  We get a first same error. Later I changed the name of the application, then it works fine.

  Note that there are two fields of application name. First field only I gave Payables. Second field should be great book otherwise in table field gl_daily_rates table will not display in LOV for other applications.

• Email alerts does not work but test Yes - MD3200

  Hello!

  We have recently acquired a SAS MD3200 and we are very happy about it.

  But yesterday we had a drive failure and no alert message,

  Description of what we have:

  -Storage Manager upward and running on a Win 2008;

  -Email and all selected filters (warning, information, etc...);

  -e-mail tested ok.

  -the SMmonitor to the top and the conduct;

  -the server, where the SMmonitor and the Storage Manager are running, is on the same network of the MD3200;

  -I can ping both NICs of storage;

  I also disabled the windows firewall (I don't know if that is the question), put the new drive in the hope of receiving an email, but not... :-(

  Help?

  TIA

  Paulo

  Thank you Kenny.

  Everything is well configured.

  The problem is some kind of incompatibility between the SMMonitor and the mail server (qmail). When the coordinates with alerts "include" is disabled, all goes well.

  It must be a '\n' somewhere.

  See you soon!

• JavaScript alert does not work when published, ok in preview in the browser

  I have a problem where when I have javascript executed at the end of the presentation, or even a button in a captivate presentation, I can't do a javascript alert (or any what js) when the captivate is published.  I open the html code.

  However, when I use the "Preview in browser" option the js works ok!

  Any ideas?  Thanks in advance.

  Hello

  This could be the Flash security silently blocking things.

  See if following the steps in the tutorial below the help link everything.

  Click here to see the tutorial.

  See you soon... Rick

  Click here for authorized Adobe Captivate and RoboHelp HTML training Click here for the SorcerStone Blog Click here for RoboHelp and Captivate eBooks

• JavaScript works with an alert, but does not work without it. Why?

  This happened to me before, but I was able to solve my problem. Now I'm not.

  Let me explain: I have a javascript function which I call when I double click on a line on a table:

  [code]

  	function CallServ (evt) {}
  	source var = evt.getSource ();

  	AdfCustomEvent.queue (source, "call",
  	{
  	},

  (false);

  	auxDblClick.call (this, source);
  	}

  	function auxDblClick (CBC) {}
  	split var = src.toString () .split ('=');
  	var idButton = split [1];
  	var split2 = idButton.split(':');
  	okButton = split2 var [0].concat(':');
  	for (var i = 1; i & lt; (split2.length - 1); i ++) {}
  	okButton = okButton.concat (split2 [i], ' :');)
  	}
  	okButton = okButton.concat ('dc_cb1');
  	var comp = AdfPage.PAGE.findComponent (okButton);
  	Alert (COMP);
  	AdfActionEvent.queue (comp, comp.getPartialSubmit ());
  	} [/ code]

  As you can see, my alert line is commented. If it is not commented, the "auxDblClick" feature works very well: it will print the model on the alert, and then it will perform the action of the dc_cb1 button. However, when I commented the alert function, it stops working.

  I have PartialTrigger set to "true" on my dc_cb1 button and the clientComponent is set to 'true '. I've also set to true ClientComponent on the table, but it does not work.

  So, why the function working with alert, but does not work with the alert off the coast? What Miss me?

  
  P.S: jdev version 11.1.2.4.0

  I found the solution:

  Before the "AdfActionEvent.queue (comp, comp.getPartialSubmit ());" line, I used the update function. Like this:

  	var t = document.getElementById (okButton);
  	t.Focus ();

  Now everything works fine

• AIR 4.0 captivates runtime does not work: alert "requires a version of Adobe AIR.

  I create a captive AIR runtime application, and it does not work on a target computer Windows *. Instead of this, the following alert:

  This application requires a version of Adobe AIR, which can not be found. Please download the latest version of this run of http://www.adobe.com/go/getair, or contact the author of the request for an updated version.

  How can I present the captive runtime differently so it does not appear this message? The application is a pure ActionScript application compiled with the binary adt of the stand-alone version of the SDK software (this is not Flex).

  In addition, I am troubled that a captive runtime ping Adobe AIR application somehow. I see occasional pings to an adobe site at launch of the application (something like airdownload2.adobe.com, if I remember correctly). No I do not use service calls in my application at this stage of development, it is very simple and should not be the net ping at all. Why is this happening? I need to disable it too.

  * Problem occurring only on a Windows 7 Home Premium 64 - bit specific computer. It's unfortunately the thin client machine so I can't tinker with it.

  SOLVED

  It turns out be a case of user error.

  The client, on the problem machine, has been stealthily in the zip package using some owner zip utilities that they have configured on their machine and double-clicking the exe file it there instead of having unzipped the package and running exe Explorer file. The error message is misleading.

  Obviously this question will be avoided for the retail version after that a Setup program is built.

• Why Firefox Sync does not work on my home network, but at work?

  Firefox Sync on my laptop does not work when my laptop is connected to my home network, but for example if I'm at my desk.

  The internet connection in my house is fine, I can surf the web with this same Firefox on IPv4 and IPv6, DNS etc. also works. Connection to accounts.firefox.com works also, as Firefox for the sync account. Only the synchronization process runs aground. On my desktop at home, I have exactly the same problems. When I open https://sync-209-us-west-2.sync.services.mozilla.com/ in a browser tab, I see a confirmation message that synchronization runs on this server, so apparently the network path between my computer and this server is free.

  After investigation with Wireshark, I see the TLS negotiation successfully, then packages the client was able to respond and after some time, the server closes the connection (encrypted alert). Apparently, no content is transferred between the client and the server. I have attached a screenshot of how Wireshark sees the conversation between the server and the client (sending pictures here did not work so I put on the web: http://ibin.co/1zXABHKdj5mA).

  To exclude a possible configuration problem or bad module, I created a clean Firefox profile and logged into my account in Firefox, but this shows exactly the same problems.

  Fun fact: Firefox on my Android phone will sync on my home network.

  Below, I will link two logs, a successful synchronization (corporate network) and a synchronization failed (home network):
  Sync @ Office: http://pastebin.com/rZmfrbdL
  Sync @ home: http://pastebin.com/a3KUCevJ

  The problem seems to be with your ISP - you can refer to https://bugzilla.mozilla.org/show_bug.cgi?id=1118958 and they may be able to find a workaround by changing your diet or to help you configure a different MTU for the network.

  I hope this helps.

  Mark

• Why Javascript does not work properly?

  I'm working on a web page and try this script, but it does not work (although it works fine in IE). The code is given below:

  My function is:

  function validateNumber()
          {
              var x=window.event.keyCode;
              //alert(x);
              if(!(x>=48 && x<=57))
                  {
                      alert("Please type a number between 0 and 9 !!");
                  }
          }

  I use it as:

  <input type="text" name="cust_age" value=0 size="15" onkeypress="return validateNumber()" style="font-size: 16pt" />

  Please let me know how to solve this problem.

  Firefox does not use a global event of the window.
  On Firefox, you will need to pass the event to the function.

  I think it should work (I'm not an expert):

  <input type="text" name="cust_age" value=0 size="15" onkeypress="return validateNumber(event)" style="font-size: 16pt" />
  
  function validateNumber(event)
          {
              var x=window.event? window.event.keyCode : event;
              //alert(x);
              if(!(x>=48 && x<=57))
                  {
                      alert("Please type a number between 0 and 9 !!");
                  }
          }

• Re: Satellite Pro L500-1VX-accessibility (FN key) does not work correctly

  I need your help to fix this problem on my Accessibility button does not work, when I press the FN key to turn my wireless on it does not work.
  When I go to program files > Toshiba > utilities > TACSPROP.exe a warning alert telling me it does not allow in this operating system.
  And for your information I have Windows 7 32 bit.

  If you are very popular to tell me what to do with this problem.

  Hello

  All the stuff for Win7 32 bit, you can find on the Toshiba support page in the download section > http://eu.computers.toshiba-europe.com > support & downloads.

  As Akuma written already install the most recent value package and check the functionality of the FN keys.
  Wireless network card is installed correctly?

• volume button does not work

  I am on Iphone 4, IOS 7.1.2

  Suddenly my volume knob does not work. All alert notification, unless the notification of appeal, does not work either. The sound of music, Youtube, video does not work either.

  I do not think that my speakers is worth it, because I get the call notification and I still can't use the voice command.

  What is the problem with my iphone? And how to fix it? Should I reset it?

  Need help, please... >. <

  Restart the phone - if the problem persists, please bring the device to an Apple or an authorized repair center

  Restart your iPhone, iPad or iPod touch - Apple Support

• my iphone sounds not always or text alerts do not work

  What would be my Iphone not ring for all calls? Also my text alerts are not his, but very rarely.  This could be the cause? I turned off my phone several times to reset and it does not work.

  If you see a Crescent Moon above you view: check - settings - do not disturb = Off?

• Satellite T135 how to enter Safe Mode and HDD Recovery if 'F8' does not work

  Hello everyone

  I have a laptop Toshiba Satellite T135 and it crashed recently. Since then, whenever I turn it on, startup repair is enabled automatically. But it does not fix the error.
  I tried to solve the problem with the system restore, but that no longer works. So I think I have to go through the procedure of HARD drive recovery.

  The problem is that I have a lot of data on my laptop that I must first of all safe. I wanted to do it via Safe Mode that supposedly, I should be able to enter by pressing "F8" at initialization, when the Windows logo appears. But my laptop is not responding when I press F8, but rather getting a sound alert, if I press the button for a long time.

  Apart from how to enter safe mode by pressing F8 during initialization does not work, I have a second question: Toshiba Recovery Wizard is the equivalent for the HDD recovery procedure? It is the only similar option that I could find...

  Thank you very much for your advice.

  Hello

  The recovery of HARD drive installs the image of Toshiba.
  The image is the package that contains the operating system, drivers and all the tools that have been installed on the first day of purchase; simply said; using HARD drive recovery you would set the laptop back to factory settings.

  You want to save the date before you install the operating system once more?
  Well, remove the HARD drive, put this in a USB HDD enclosure and move the file to the HARD drive to another computer.
  It would be the best way to get the file save.

• "Sweep left" does not work for some email notifications

  On some mail notifications, as documented works "sweep left" very well, but I'm still not clear what if any difference there is between 'X' and 'Clear' (see previous announcement) - I have recently several contradictory theories.  However, for SOME e-mail notifications, "left sweep" simply does not work - nothing happens.  I * think * it's maybe for 'complex HTML' messages, not 100% sure.

  Hi Doug

  As previously indicated, 'X' and are clearly part of the same key - typing will erase / reject notification from your list of recorded notifications.

  Also as previously indicated, there is a difference between alerts by mail in the list of alerts in the Notification Center (IE hitting swiping to the left on the alert) compensation and removal / rampage messages in the Mail application.

  More information:

  https://help.Apple.com/watch/#/apddca457a4f

  https://help.Apple.com/watch/#/apd29461a7b7

• All my sounds work very well on my iPhone more 6s except the 'duck' sound does not work

  MY iPhone, 3 week old 6 s more, 64 GB using iOS 9.2...

  for my "Mail" alert sound stopped working during the night.  The phone always vibrates when I get an email but th 'Duck' sound is no longer working.

  When I change to use any sound, new sound works fine. ONLY THE DUCK SOUND does not work.

  Any ideas on how to fix my sound 'duck '?

  In fact, my Duck sound won't work for any alert. It cannot be tested as a sound signal.  It's like my Duck sound flew. And I'm not kidding.

  its just gone!