Alert: "State of connection and power supply home" on vcenter 5.1.0

Alert | : connection and power host on Vcenter 5.1.0 and Exi 5.1.0 State trigger will does not but its execution such as available on direct access to esxi.

This Aler trigger automatically after you again 'to connect to this host.

Please help me solve problem

Advertisement

Be sure to vCenter Server is able to resolve the host name and vice versa. Add a host record - A with the IP address of your host (which btw. is always visible on your screen) to your DNS server and you connect to the host by its FULL domain name, rather than by its IP address.

André

Tags: VMware

Similar Questions

  • Qosmio X X 770-11 - new motherboard and power supply for sale

    Brand new motherboard and power supply for sale

    Posted by jtk
    Brand new motherboard and power supply for sale

    Also Intel® Core i7-2670QM CPU
    4 096 + 4 096) MB, DDR3 RAM (1 333 MHz) memory
    1 000 hard drive (Solid State hybrid 4 G Drive with 500 GB and 4 GB of memory NAND flash + 500 GB) GB
    Jim Kerr sent from my iPad

  • Have HP Pavilion dv2500, won, t turn on. When you connect the power supply blinks blue.

    Have HP Pavilion laptop dv2500, p/n kn997ua #aba, does not illuminate. When you connect the power supply blinks blue.

    Now you can take the laptop at best buy or Wal-Mart and get them to plug a power cord. This will give you an idea if you need to buy a power cord or not.

    Again, you can always buy the power supply cord and if it does not return.

    THX

  • Get a new case and power supply for my HP Pavilion a6355.uk

    1. sound of the HP Pavilion a6355.uk

    2. Windows 7 Professional 64-bit

    3. no error message

    4. it is not a problem, but its had a new graphics card, new ssd, another hard drive, removed the 500 GB hard drive, and that's all I think.

    Hi, I want to get a new case and power supply for my office

    If I want is http://www.pcworld.co.uk/gbuk/antec-one-0-761345-15970-8-atx-full-tower-pc-case-black-13374257-pdt.h...

    The power I want is http://www.pcworld.co.uk/gbuk/zs650w-uk-zs-series-ocz-zs650w-uk-atx-psu-650w-11342059-pdt.html

    Is 650 Watt most the jury can take? I read somewhere that most can take is 650 watts.

    My only concern is that, how do you take the I/O shield? I've never done before.

    Yes, it will fit your card mother Μatx.

    PS > remember to toggle the toggle SOLVED / SOLUTION to the right of MY post/reply.

  • Queries on CPU and power supply Patches

    We are 11.5.10.2 and 10.2.0.4.We had to apply the patches of CPU and PSU.

    1. when applying the latest patch of CPU, that means it will apply to all of the previous fixes CPU on both applications and DB.
    This means that CPU is cumulative.

    2. What is patch PSU and what is the difference between the cpu and psu. When we apply the last PSU it will apply the latest patch cpu as well.

    Please provide the latest CPU and psu note No.. which includes patches as well.

    Do a search of the forum before posting similar questions that this topic has been discussed several times.

    We are 11.5.10.2 and 10.2.0.4.We had to apply the patches of CPU and PSU.

    1. when applying the latest patch of CPU, that means it will apply to all of the previous fixes CPU on both applications and DB.
    This means that CPU is cumulative.

    Please see this link.

    Update rollup of criticism of switching to E-Business Suite 11i
    http://blogs.Oracle.com/stevenChan/2010/01/cumulative_ebs_cpu.html

    2. What is patch PSU and what is the difference between the cpu and psu. When we apply the last PSU it will apply the latest patch cpu as well.

    Can the be - Business Users apply Patch Set updates?
    http://blogs.Oracle.com/stevenChan/2009/08/can_ebs_users_apply_database_patch_set_updates.html

    CPU and power supply
    Re: CPU/PSU
    PSU Vs CPU
    Power supply and the difference b/w CPU

    Please provide the latest CPU and psu note No.. which includes patches as well.

    Critical update for January 2011 now available
    http://blogs.Oracle.com/stevenChan/2011/01/cpu_jan_2011.html

    Thank you
    Hussein

  • Satellite L350-21F NO CONNECT the power SUPPLY

    The computer tells me in Windows it is not connected to the power supply, even if it is connected. I tried with and without battery, also the power icon is not lit, and now the battery is almost empty. The computer worked for the past 6 years and now all of a sudden what happens.

    Can you help me how to find which component does not work? What are the factors despite the adapter are possible because of this problem and how can I know?

    Thank you in advance.
    Elenktik

    Hello

    I think first of all you must check if the adapter is OK.
    The Satellite L350 requires a 6.32 A AC adapter 19V

    Possible part number: PA3290E-3AC3

  • Graphics upgrade of Office CQ5624P and power supply

    My PC is... Compaq PC desktop Presario CQ5624P w / graphics using nVidia GeForce 6150SE integrated & Internal 250W (100V-240V) total power: 250 w, power supply: •100-127V/8 has •200-240 v/4.

    PROBLEM: I would like to upgrade my graphics
    (but... * embedded video is not available if a graphics card is installed.) Also one but... NOTE: * built into the graphics card or the card PCI Express x 16 slot are usable at once; they are not usable at the same time.)

    Question: I will lose all functions of e/s (VGA, USB ports, ethernet port, input audio & outputs) on the graphics card integrated if I update to an EVGA GT619?

    Regarding the power supply: what are the specifications for a better diet which is virtually "plug-and - go" compatible with the Office of CQ5624P? " (between 400W to 500W).

    I'm not a great player, I'm looking for a way to use a 50 "flat screen and my pc monitor at base of household use, movies and low end games... Help appreciated... Thank you.

    Hello again FLknights,

    I can't make a recommendation, but I can give you some information. First of all, the graphics card you are looking at is a PCI Express 2.0 x 16, and who can worry because you do not have a PCI Express 2.0 x 16 slot on your Board. If you are concerned don't be there is no difference that he connects on your Board, so it should work fine.

    Looking at the two UCP will work and both leave you with room for growth if you decide to go this route. You certainly need to change the power supply though as the 250 watt installed is not sufficient for the needs of new cards 300watts.

    In addition, the graphics card supports the operating system of Windows XP to Windows 8. For me, it would mean that you should also make sure that when you go to turn off the chart embedded in the BIOS you also enable Legacy Support or material according to what you see.

    I hope this helps. Thanks again for your post on the HP Forums. Have a great day!

  • HP M9340f and Power Supply Upgrade graphics card

    HP dear community,

    I read some of the forums on the upgrade of the 9500gs it's an old graphics used for the HP M9340f. It's been 4 years now and the computer still works very well. I need advice for the upgrade on the graphics card.

    My specs are: http://support.hp.com/us-en/document/c01465973

    I know that there a 350W power supply. I am worried because the 9500gs video card has a connector that is powered from the motherboard, it has 2 pins (black and white wire). I read about the update for the ATI HD 5670 Nvidia 440 or 450. I know it is very old, but the 9500gs is still able to run modern games.

    The recommendations would work due to the connector 2 pin?

    Upgrading power supply help, because I think the video card is to select the power supply to the motherboard and not directly from the power supply.  I'm still confused on what the black and white wire, it is connected to the video card.

    I don't mind getting a greater electric power because I can get a better card. Just concerned with the black and white wire.

    I also read here that this person was able to exchange his power supply and graphics card for a gtx 560 ti and a 550W power supply. Its model is newer than mine. http://www.tested.com/forums/PC-and-Mac/8692-seeking-upgrading-graphic-cardnew-computer-advise/?&p=1

    I am really limited?

    Thank you

    Abe

    Swarl3s,

    We will divide your questions.

    (1) black/white is audio Spdif. Asus Nvidia supports a S-video port, audio is provided by the additional wiring.

    Now that the concern you had as answered (the whitw/black wiring), Let's proceed to the card.

    (2) what are your expectations of game? WOW, Diablo 3. Each has a recommended graphics card and each graphics card recommended the power of the power supply. Always add a tolerance.

    Regarding the GTX560Ti and a combination of 550W PSU, I see no problem. Then again, see here for more information and suggestions.

  • connect the power supply to the doors

    Hello

    I don't use logic (74HC and other HCT... CMOS) gates that often, but when I use it connects not always the same pattern and provision.

    When put doors on my diagram, there is no visible electrical connection, so I can not connect myself.

    for example, I have a Council with two parts divided by optocouplers, allows appeal an entry and part of the output.

    The input part has its own power supply 5V, and the fact the part output.

    When I place a HC138 on the entrance and the other on the output, how to hit their supplies (in a simple way)?

    Johan

    Right click on any door, the properties, the pines, you see the VCC and GND in the layouts of the cell, click the cell and type the name of net as + 5V or whether your power nets are there.  It will then connect them as you wish.  Its a bad system, but it works.  There should be a door of indicated power, but for some reason, OR don't come this way and it is very annoying and in the land of PCB, can be a vital mistake if care is not taken to this 'small' detail.  Kind regards

  • No video after having replaced the graphics card and power supply

    I have a desktop HP Pavilion m9515y PC. The graphics card that came with it (NVidia GeForce 9600 GS, 768 MB) did not suit the minimum specification required by a game that I played. Things in the game has been very slow - I could see a delay of s ~0.5 to move my mouse on the splash screen for the game.

    Today, I bought a new graphics (NVidia Geforce GTX 550Ti, 1 GB) card and a Corsair 700W PSU to replace the 350W one that came with the system.

    From the outset that I messed up something. It's been a while since I opened the box and I thought wrongly that the top panel (with the rubber surface) to come off before the side panel could be deleted. I removed the two screws now the top panel in place and slipped it in the process it disconnect and two thin black wires which I do not know the function. It was attached near the power button and one was attached to the rear of the Panel. The sons have stripped the ends rather than a connector of some sort and I don't know how they connect back or if they are the cause of the problem that I see now.

    In any case, I advanced and removed the old PSU and video card and replace them with the new. Two of them are significantly larger than the components, they replaced, but they managed to adapt with some maneuvers. All cards are well-placed in the PCI slots.

    The power is connected hard disk, DVD drive, the motherboard and the new video card. I'm not aware of any other connections that need to be made to food. There was not much clearance between the power supply and the back of the DVD player, but I was able to get the data and clinging to the DVD of power cables.

    After having done all that, I hooked my monitor DVI cable, plugged in the power cable and turned on the power. When I plug it in, the power button on the top of the tower is illuminated and the power seems to work. However, my monitor indicates that there is no video signal. I tried to put the old return video card, but I don't always have a video signal. Because I can't get a video signal, I can't tell if the PC is start or not.

    Does anyone know the purpose of the wires that were connected to the top of the Tower?

    They would cause they cause this problem if they are not correctly connected?
    Any suggestions for the possible causes of the absence of a signal from a video card?

    I just took the PC to a repair shop and it turns out that the problem was quite simple: I don't have the PCU power cable 4 pins hanging. Everything seems to start fine when we hung out at the shop. Fortunately, the place that I took did not even charge me what as they don't charge co-pays and since it is such a simple fix.

    Now I feel kind of stupid, but I know better next time...

  • Please help me with the video card and power supply issues!

    Hello and thanks in advance for any help. I'll try and do a short explanation, but I can't promise anything. I bought an a6620f Pavilion about 2 months ago I didn't know that you had to purchase a special hardware in order to play video games. In any case, I bought about 300.00 worth of new video games and none of them works. they say because of my video card. Then try to buy a new video card and it won't work because I only have a 250 watt power supply. I spoke with a hp technician before you buy a PSU and I was told that my motherboard was only designed to use a 300 watt max power I tried to buy one at best buy and the clerk said 4500 is the smallest they sell. and I need at least a 400 Watt or powerrsupply to make the new video card with a value of buyiong. My questuion is what can I do if I can't buy one more big power supply how can I install a new video casrd? Please help me I'm lost

    Oh and in case you want some specs on my system here are a few

    Windows Vista Home premium service pack1
    HP Pavilion a6620f
    Processor: pentium dual core cpu e5200 @ 2.50 GHZ
    memory: 4.00 GB
    system type: 64-bit operating system
    Version of DirectX 10
    graphics card: intel GMA 3100 Total memory 256 MB

    Message edited by chefinomaha on 06/03/2009 16:38

    Hi chefinomaha,

    Sorry to hear about your frustration. Here's some good news.

    I think you have been misinformed or there was a communication error. Your motherboard should not be limited to the only 300W. I don't know with certainty how high you can go in watts, but you can go higher and should go higher, if you add a video card.

    The important thing is to get the right kind of diet that fits your connectors.

    Here's your motherboard page.

    Here is a document with step-by-step instructions and video for adding a video card.

    Here is a document with the video to replace the power supply.

  • I3 4130 map graphics and Power supply

    Hey guys, I have an i3 4130 with 8 GB of ram,

    http://support.HP.com/us-en/document/c04119419

    Of course, this processor and ram are good for the game, as I have seen online videos of people playing bf4 and crysis 3. I also want to play these games and cs: GB and dirty bomb and dragon age.  I don't really like playing high heat, the middle is fine for me.  I really want to get a r9 x 270 BC, they are in a large part to the best buy right now.  I will also buy a 650W power supply to go with it. My boyfriend is a geek and can install it for me. I took action, and I can fit such a graphics card or the gtx 660, in my case. [cards that are 10 x 4]

    However, I saw in another post that my motherboard has a connector 4-pin. Is this bad? The website says that my motherboard can support up to an i7 uprade!... So why not other new powerful pieces such as a GPU or a power supply.  I get that HP does not have computers for games. Why would they do a motherboard that can run an i7, but not an equally powerful GPU. I get that HP does not have the gaming PC, but those of office. However, it is the PC in my family study, so I'll try to make it work.

    Another way is for ma to get the GTX 750, because this card has a minimum required 300w power supply.

    http://www.Newegg.com/product/product.aspx?item=N82E16814487024

    However, a person in another forum said that HP uses cheap power supplies and will not have enough tension on the 12v rail. is this true?  If this way works, I definitely don't go this way as it is easy... also no need external with this map of power cord. However, if my power supply does not have enough Volts on the 12v rail, so I'll just take the graphics card I want and needed food.

    It's really frustrating me because I played some very old games [rtcw, and] with friends on teamspeak at night and my integrated graphics card could handle, but now they are turning on modern games that I can't play and I reallly want to understand this before you go and spend a lot of money. Thanks for any response.

    Andrew, welcome to the forum.

    andrewmorgan98 wrote:

    Hey guys, I have an i3 4130 with 8 GB of ram,

    http://support.HP.com/us-en/document/c04119419

    Of course, this processor and ram are good for the game, as I have seen online videos of people playing bf4 and crysis 3. I also want to play these games and cs: GB and dirty bomb and dragon age.  I don't really like playing high heat, the middle is fine for me.  I really want to get a r9 x 270 BC, they are in a large part to the best buy right now.  I will also buy a 650W power supply to go with it. My boyfriend is a geek and can install it for me. I took action, and I can fit such a graphics card or the gtx 660, in my case. [cards that are 10 x 4]

    However, I saw in another post that my motherboard has a connector 4-pin. Is this bad? The website says that my motherboard can support up to an i7 uprade!... So why not other new powerful pieces such as a GPU or a power supply.  I get that HP does not have computers for games. Why would they do a motherboard that can run an i7, but not an equally powerful GPU. I get that HP does not have the gaming PC, but those of office. However, it is the PC in my family study, so I'll try to make it work.

    Another way is for ma to get the GTX 750, because this card has a minimum required 300w power supply.

    http://www.Newegg.com/product/product.aspx?item=N82E16814487024

    A: I definitely recommend that you try the EVGA GTX 750 Ti.  I read a lot of good things about it.  It does not all the connectors extra power on the power supply.  Regarding the PSU in HP computers is lousy, the fact is that they install the power supply that is compatible with the OEM components.  Even if their computer can be upgraded, they design that enable out of the box.  You can try with the current 300W PSU, but if it does not work, I suggest you buy a power supply at least 500W; 600W would be even better for futute upgrades.

    However, a person in another forum said that HP uses cheap power supplies and will not have enough tension on the 12v rail. is this true?  If this way works, I definitely don't go this way as it is easy... also no need external with this map of power cord. However, if my power supply does not have enough Volts on the 12v rail, so I'll just take the graphics card I want and needed food.

    It's really frustrating me because I played some very old games [rtcw, and] with friends on teamspeak at night and my integrated graphics card could handle, but now they are turning on modern games that I can't play and I reallly want to understand this before you go and spend a lot of money. Thanks for any response.

    You can see my answers to your questions above in orange.  As suggested, the GTX 750 it should work for all the games you mentioned.

    Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

  • Can I put a new graphics card and power supply in my computer.

    Hey all, I have the model P7-1459 and it is good, but I was hoping maybe give him a boost of game. But I was not able to know if she could handle what I want to do. The new graphics card would require a 450W power supply, and I do not know if this model could handle. Anyone know of a way or another? Need help.

    Joshua, you are welcome!

    I'm sorry that I misunderstood your question.  I thought that you wanted to know if the computer would process the card.

    Yes, you can upgrade the power supply (PSU).  I suggest to measure the PSU existing and comparing these measures to the one you choose.  I love OCZ and Corsair.  They will provide quality amateur with a reasonable price.  A good video card requires a clean and stable power supply.  I recommend at least 500W; 550W at 600W would be even better.  This would allow for future updates.  The computer uses only the amount of energy needed to operate the components.

    I hope this helps.

    If your problem is solved, please click "accept as a Solution.

  • HP Envy 750-177C: update video card and power supply

    Hi I was wondering if anyone has any suggestions on a 2 GB video card that can fit in my camera, and if the power supply must also be of a certain type, thank you.

    @Docta1, welcome to the forum.

    Here is a video card that will definitely work with your computer.

    The power supply unit (PSU) in the computer is stanard ATX.  I love Corsair products and recommend at least 600W.   A modular power supply is good for small boxes.  It allows you to use only the cables that are absolutely necessary.  This allows for better air circulation.  The video in my link card requires a connector 6 extra pins.

    Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

  • P7-1490 upgrade graphics card and power supply

    I just got a GEFORCE GTX 650TI stimulate the graphics card.  The 300 watt Power Supply on my P7-1490 can't handle it because I need a 6-pin power connector.  The 1490 comes with a 300 Watt power supply.  I need something at least 450 watts.  What upgrade adapts to my box.  Also, the Jasmine motherboard can handle the new graphics card.  It fits into the PCI Express slot.

    Please look at the Corsair CX500, CX600, CX500M, or CX600M power supplies for your needs. Yes, the card of mother Jasmine in your p7-1490 should be able to manage the GTX 650 it. In addition, you need to enable 'Secure Boot' and possibly 'Legacy Support' in the BIOS before installing the GTX 650 it.

    Please click the White Star of KUDOS to show your appreciation

Maybe you are looking for

  • Space at the top of Page

    My page windows are now under the Menu bar, have been before on the same line.

  • Uncertain of the dv6 1143TX bios update

    Hello, I was wondering weather or not, I need to update my laptop Bios. I did not update the bios since I bought it and it does not say that there is an update available. I am skeptical about the weather or not, it's an updated value, because I saw m

  • my laptop has lost its sound!

    I don't know why my windows xp has lost its sound, I go into the volume control and none of this is highlighted so here before, I can't change the settings please help

  • Device audio blackBerry Passport problem

    Hello, I have a passport for a week and now has stopped working the audio device. With the headset feels, with the President feels but by selecting "device" nothing. Multimedia calls. I tried to restore the operating system with BBlink but he did not

  • Synchronize music from mp3 player to Windws Media Center music

    Original title: SYNC MUSIC Is it possible to sync music from an mp3 player in my library of music to windows media?