Have HP Pavilion dv2500, won, t turn on. When you connect the power supply blinks blue.

Similar Questions

• HP-G62226TU: my laptop won't turn on when I push the power button

  Hello

  My laptop does not turn when I push the power button / stop and nor adjacent to the plug adapter lights turn on when I put the power supply. It behaves like completely dead. I pressed the button for 30 seconds as suggested in the following thread.

  http://h30434.www3.HP.com/T5/notebook-hardware-and-upgrade-questions/my-laptop-won-t-turn-on-when-I-...

  My laptop is 2.5 years old and was working fine without any problems so far.

  Please suggest.

  Thank you

  Himanshu2303 wrote:

  OK... I learned to get the motherboard changed. How much it will cost in India for my laptop?

  What do you suggest I should do?

  How much will it cost in India?  I have no idea. I live in Europe.

  I suggest to ask a repair shop of PC or laptop.

  If the cost of repair is more than 50% of the current value of the laptop, you would be better sourcing of a notebook replacement.

• PowerEdge T410 won't do anything when you press the power button / stop.

  My work has recently retired this t410 server. It worked without any problems when he was arrested. I had to remove and destroy the hard drives from the system. After that, I was allowed to bring home for my own use. I installed a new sata drive and plugged into the power supply and a free sata port on the motherboard. I get nothing when I tried to boot the system. This version has the unique power. Power light only lights up when you press the test button. System fan is going at full speed, but stops when you release the power button. Also on the control panel lights 1,2 and 4 and HDD power on and turn until the test button is released. There is a single green light lit on the motherboard, while it is plugged. Apart from that, I have no response when you press the main power button. Can anyone tell how to try to get it up and running again.

  -Who-

  I have not received the answers more so I think that this issue is ignored. So I'll let everyone know what finally happened. I solved my problem after a lot of electrical testing. I found a diagram of the arrangement of the power dell power supply pins and I made myself the best possible meter test. After several rounds of tests, I found several pins that did not have the right voltage. I bought a new power supply. I installed and replace everything. I plugged into the system and it auto fed on itself. I loaded from an OS and it works perfectly.

  Problem solved

• Satellite Pro 6100 turns off when I connect the power adapter

  Satellite pro 6100 works well up to this I put AC adapter / CC, then turns it self
  Any ideas would be appreciated

  see you soon

  Hello

  You use original Toshiba AC/DC adapter or another?
  What happens if you connect the AC/DC adapter, while the laptop is turned off?

  It s really strange problem, but I think that is s TI associated with AC/DC adapter or the motherboard itself

• Satellite A100-049 - how can you stop it turn on when you open the lid?

  I don't see any option to stop this in the BIOS or otherwise but it annoyingly turns on when you open the lid. I stopped it turn off when you close the lid, but prefer that he remained turned off when you open the lid.

  Any ideas?

  Hello

  I assume you are using the Vista operating system.
  Have you checked the Power Options OS located in the control panel? Do it!

  But a question; Why you use n t stop him if you n t want to turn on the laptop by opening the cover.

• MUTE button light won't turn on when you press

  My laptop is a laptop HP Envy 15 TS product number: F5C62EA. When I press the button mute on my keyboard, the light does not appear but the laptop is cut.

  Hi Stanleyh9,

  I'm sorry to know that the steps above may not help you solve the problem and you have problems with your Beats Audio. Please click on the link given below by selecting the operating system should be able to help solve the problem on your device.

  HP ENVY TouchSmart drivers for PC laptop 15-j102sa

  Please download the audio drivers and run who should be able to help solve the problem.

  Kindly let me know if this helped you solve your problem or if you need further assistance.

• Satellite M100 - screen turns white when you press the bottom of the frame of the screen

  Hello

  I have a strange problem with my Satellite M100.

  When to start the laptop, the screen is totally blank.
  When hand press to the middle part of the bottom of the frame of the screen (black plastic frame) the display looks fine, as long as I am pressing on it.
  When let pressing, the screen becomes funny,

  Also noticed, when top screen downstairs, appears blurry white screen.
  But the screen is OK as long as I pressed the plastic at the bottom of the screen frame.

  Any idea would be greatly appreciated, want to confirm which part is faulty, so I can avoid replacing the whole LCD.

  Thanks in advance.

  Hello

  For as far as I know the small part called FL inverter is hidden behind the frame s screen.
  Maybe it s something with this part. Who knows it would be necessary to test this
  On the other hand, one cannot rule out a display problem

  You see, it's hard to say, really a malfunction which part
  Therefore, it would be advisable to contact a technician for laptop

  See you soon

• HP Pavilion 500-199: is there a reason to change the power supply?

  is there a reason to change the stock PSU? Many people have been telling me that the stock of POWER supplies are really bad, especially after I ugraded to a 750 GTX. The card works perfectly. So... is there a reason to change? Also how effective is the current PSU?

  Another way to explain this.  The GT645 stock used 31W, the GTX745 uses 55W.  The 300W PSU stock, as you say, has been powered of the GTX745.  So, it is fair to say that the stock of 300W PSU had enough wattage to spare to run the new card. "GeForce" States that the minimum power should be 300W. Feeding is minimum.

• Satellite L50-B-1NM - speakers turned off when you move the screen

  Hello

  yesterday, I got Toshiba L50-B-1NM.
  Everything seems to be ok except for one thing.
  Speakers to stop when the screen is slightly moved. There are positions of the screen, when they work, but just slightly push the screen and they are now closed. Movement of the screen has no impact on its external [helmet], is without a doubt the speakers or its connection.
  I wanted to use warranty, however, I am not sure if it covers this kind of defective. Anyone know?

  And he also said: [even if the warranty is still on]
  Product not available, unfortunately your product is currently not available so please contact your place of purchase.

  Thanks for help

  Thanks for your comments... Great that you can solve this problem

• Pavilion 22bw is black and white when you watch the video on web page

  I recently bought an HP 22bw monitor.

  I am connected to a desktop HP Pavillion with a DVI, HDMI video connection, no. My resolution is 1920 x 1080.

  My problem is whenever I want to watch a YouTube video on a web page or a web page has an inserted in video as upper right of Sportsillustrated web page the monitor goes black and white. The only way he'll be back, if I move the mouse, which he corrects only for a few seconds and then goes back to white/black.

  Any suggestions on how to fix this problem would be greatly appreciated.

  HD of my PC died on me, so I'll close this message. After I received my PC a few up and running, I'll post my problem again.

• Preview screen turns black when you use the slider to soften ultra key

  Hello

  I'm working on a video, including a greenscreen. That is why I use the ultra key to make the transparent green screnscreen. Whenever I touch the slider "soften" Ultra key, windos preview blackens. I can't get it back to normal until I restart the first. Version 2015.4.

  This issue is being investigated. So far it has been reproduced with acceleration GPU on Windows. What is the case on your system? Also, could you provide your operating system, graphics card and if you use CUDA or OpenCL?

  A possible solution is to go into project settings > General and set the Mercury Playback Engine software only, when you use the parameter to soften.

  Thank you.

• Replace the power supply, computer does not turn on

  I had a Seasonic SS 560 KM power supply for my HP Pav e9280t.  I removed the old power supply while keeping the power cable is plugged in.  Then replaced each power cables one at a time in the new power supply and finally he attached to the tower.

  Now when I try to turn on your computer, it just boots barely upward.  I can hear the fans kick on for a second or two, then everything just stops.

  Since I replaced the cables one at a time I don't think I missed anything; MoBo, Fan of MoBo, 1 optical drive, disk HARD 2 and 1GPU.  The tower is open and I can see the fan, the fan GPU MoBo and PSU fan all hang on one second so that they get the right power?

  I must have missed something or possibly faulty PSU?  Any help will be appreciated.

  Hello Chadow86, it is possible to the new power supply may be faulty. I would check double all the connectors again.

  Since you mentioned the fan to the motherboard, it would not be necessary to unplug the CPU fan when you changed the power supply. The CPU fan power source comes from the motherboard and not directly from the power supply. I don't know what fan on the motherboard you are talking about.

  I watched the specifications and photos of the new power supply. It is a modular design. I would check the cables connected to the power supply to make sure that they are in the correct connectors.

  If the system still does not start, the cause could be a new power supply faulty.

  I hope this helps.

• My hp Pavilion p6230y died. It will not start. The power LED button does not lite.

  The power supply is turned on, and all voltages are correct (measured). The fan turns on when you press the power button and I can feel the rotation of the disk and it's hot. I stripped naked essential system, nothing that the keyboard wireless & mouse, HDMI connector to monitor. I cleaned all the dust from the inside of the computer. I reinstalled the CPU chip. No beeps at all coming from the motherboard. The heatsink is stone cold. I suspect either chip CPU & and/or motherboard. Anyone have any ideas?

  Replaced the motherboard. Problem solved.

• MacBook Pro 13 won't turn on MagSafe flashes green, before power light flashes

  MacBook battery failed before I could load. Now, when it is attached to the MagSafe power cable, the Green led flashes 2 seconds and the power led on the front flashes for a split second. The fan turns as it seems to light up, then dies. When you press the power button, the magsafe remains steady. Have tried to reset the SMC, but appears not to have done anything. Then I removed the battery connector, but the above symptoms persist. Any ideas appreciated.

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• Please help me I have ACTIVE BAD PARTITION and now hp Pavilion dv2000 won't turn on

  Please help me I have ACTIVE BAD PARTITION and now hp Pavilion dv2000 won't turn on

  Start with a utility cd and change the partition Active. If you scroll down on the page and get > CD Bootable and > ImgBurn to burn the iso image to cd, a guide on the use of ImgBurn to write an ISO on a disc is > here. Once created, boot from it.