Alerts emails to a non-standard SMTP port

Similar Questions

• vMA vCenter 4.1 and non-standard port

  I just implemented the vMA 4.1, everything works obtained auth fine AD, even work.  However, when I try to run a command as a user of the AD, I get this:

  [vi-admin@vma01 ~] [vcenter01] $ esxcfg-mpath - l - vihost esxhost4.globalivewireless.local
  Enter the user name: domain\domainadminacct
  Enter the password:
  Error to connect to the server " " https://vcenter01/sdk/webService': Connection refused

  Don't see much in the newspapers.

  However, if I try to connect to this URL, it will fail - it's because we connect to vCenter using 30443.  The vifp addtarget with - port_number specified work (does not work without the specified port), but it seems standard commands always try to use 443.

  Is it possible to change the nature of the non-use of to our non standard port 443?

  This is more than a concept vCLI, vMA. Think of vMA as just a camera vCLI, instead of having to install the vCLI yourself, vMA is delivered pre-packaged is a Linux device.

  Have a look here for info - http://pubs.vmware.com/vsphere-50/index.jsp?topic=/com.vmware.vcli.examples.doc_50/cli_overviews.3.8.html

  Basically, for each global option such as username, password, server, etc. that you can specify in a file, then instead of typing on each option, you can simply use the – config [fichier_config] that includes your options.

• When I try to email using Windows, I get: Acct: POP server: SMTP, Protocol: SMTP, Port: 25, secure: no, Socket error: 11101, ErrorNumber: 0X800CC0D. Does not send mail... Help!

  When I try to send an e-mail using Windows, I get the error message shows: account: POP. Server: SMTP; Protocol: SMTP; Port: 25; Safe: No; Socket error: 11101; Error number: 0X800CCCOD.

  Not surprising. Name of your server is not SMTP and your account name is not POP. You need get the settings appropriate to your mail server.

  Windows Mail: Setting up an account of end-to-end
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-mail-setting-up-an-account-from-start-to-finish

  A guide to setting up Windows Mail beginner
  http://www.SimpleHelp.NET/2007/02/07/a-beginners-guide-to-setting-up-Windows-Mail/

  Bruce Hagen MS - MVP [Mail]

• Alternative Outlook 2007 smtp port number.

  • Alternative Outlook 2007 smtp port number.

    Sending ' reported an error (0x800CCC80): "None of the methods of authentication supported by the client are supported by your server."

  • Outlook 2003 does not have this problem with the same mail server using the same exact account.
  • Windows Vista Ultimate SP1 with Outlook 2007 SP2 doesn't have this problem.
  • Windows XP SP3 and Outlook 2007 SP2 illustrates this problem.
  • Windows 7 with Outlook 2007 SP2 has this problem.

  We needed to move to another port for smtp 3535 25 for security reasons.  This is a wide spread question.  We are connecting to a POP3 "qmail" server to send and receive e-mails.  All systems work perfectly with the receipt of emails. Need a solution to this problem as soon as POSSIBLE please...

  Hi Swmyers,

  Here is a link to the Google Help article about connect Outlook 2007 to Gmail:
  http://mail.Google.com/support/bin/answer.py?hl=en&answer=77689
  Measures 8-11 show you exactly how to set up the SMTP port and the ports that they recommend that you use.
  Please let me know if I can be of further assistance!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Custom dashboard - alerts Email?

  Hello

  I put a dashboard customized for one of my app teams to monitor disk space on their servers

  In particular the / opt partition on Unix servers

  The dashboard works fine - but I can't seem to find out where we can set up email alerts to be generated for any server "not green".

  If you take a look at the attached

  

  Need us for the yellow / Orange and Red servers (those where used comments file system % used is greater than 70%) is for the Vcops to send an alert message to the team of the app.

  Can someone point me in the right direction, where I can define the email alerts for the comments file systems?

  Hi Vishal,

  First of all, you have setup your system to generate alerts when used in comments file system % used is greater than 70%. You must then configure alert to you Notifications alerts.

  Configure instances of alert Manager to send alert in the form of e-mail notifications. Select Manager > configure outgoing alert. Add the Instance of alert Manager to send alert notifications to users in e-mail messages, you must create an alert handler which

  send alert notifications to a mail filter.

  Here is 'VMware vCenter Operations Manager information

  Administration guide.

  Procedure

  1 select Admin > configure outgoing alert.

  2 Add or change an instance of Manager e-mail alert.

  Response option

  Add an instance of alert Manager e-mail one click the Add alert Manager.

  b Select Email alert Type drop-down menu outgoing.

  c type a name for the Alert Manager instance in the Instance name text box.

  Change an instance of alert Manager E-mail select the Alert Manager instance and click the Edit Alert Manager. You

  Cannot change the outgoing alert type.

  3 set up or change the Alert Manager e-mail settings.

  Description of the option

  SMTP_HOST type the IP address of the SMTP server. The SMTP server provided by e-mail

  the recipients of the notifications of alert messages.

  SMTP_PORT type the SMTP port number. The default value is 25.

  4 click Test to test the filter.

  vCenter Operations Manager verifies that the SMTP host and port specified is valid and check it out

  the syntax and the data from the file emailFilter.xml.

  5 click OK to save your configuration.

  vCenter Operations Manager starts the Alert Manager instance.

  Configuration of email alert Notifications

  E-mail alert notifications configuration involves adding filter rules, definition of e-mail templates and configuration

  alert notification email settings.

  A filtering rule is a set of conditions and e-mail addresses. The vCenter Operations Manager E-mail plugin uses

  filtering rules to send email notifications to alert appropriate users based on the application, resources

  kind, level alert and other criteria.

  A definition of e-mail template specifies what file to use for a given type of alert e-mail template subtype, and

  status. An e-mail template file defines the body of the text of an e-mail alert notice.

  vCenter Operations Manager provides several default e-mail template files. You can also create your own

  custom post template files. In general, you use the model files of e-mail by default for most of the notifications and

  create e-mail customized files from model for users that require different information in their notifications. You can

  create e-mail custom templates before or after that you configure e-mail template definitions.

  You usually send file definitions as the e-mail template files. Most of e-mail template

  definitions of point to the same e-mail template file, even if they are for different combinations of types of alerts

  and beneficiaries.

  emailFilter.xml file

  emailFilter.xml is an XML file that defines the filter rules and model files to use for the alert message

  notifications. The file also contains the General settings that apply to all email alert notifications.

  CAUTION do not change the emailFilter.xml directly unless you are familiar with the syntax and the XML structure. A

  formatting error may prevent job email alert notifications. If you change emailFilter.xml directly,

  Make a backup of the file until you change it.

  After you change the emailFilter.xml file, you must restart the instance of plug-in filter e-mail in

  vCenter Operations Manager to make your changes take effect

• Tips for the TCP wait of asynchronous Messages with non-standard expression tanks

  Hi all

  I have a PITA instrument that I need to communicate with in a system of greater control.  This instrument communicates via RS232 to a server running on the PC OEM application.  In order to communicate with the instrument, I have to use the TCP protocol on a specific port on Localhost - So far so good as long the protcol is answer command.

  The problem is that the instrument sends several messages asynchronously of different sizes with a double newline as a tank of termination (there are many CR/LFS all these messages so that they cannot be a MOE) and I am struggling to find a way to manage receive asynchronous messages of variable length with a cusom CHARACTER term. without having simply a fast dedicated for TCP loop reads trying to catch these asynchronous status messages.

  I wish the functions VISA TCP has worked with the local host, given that the properties that can be set to change the chariot of non-standard term.

  Open to suggestions-

  Thank you

  Ronin

  Yes, I'll be streaming in my own string buffer and then to choose the messages out of the buffer when you find the stop character.

  A technique to improve performance, rather than reading a single byte at a time is to use the "immediate" on reading TCP mode and use a high value for the "bytes read" - in this way, it will return all of the data that is there without waiting for all the specified bytes or the time-out. He will wait only the full timeout if 0 bytes are received (which you can ignore) - set to a low value such as 100ms.

• The host 'SMTP' could not be found. Please check that you have entered the server name correctly. _ subject 'Report issue', account: 'POP3', server: 'SMTP', Protocol: SMTP, Port: 25, secure (SSL): no, Socket error: 11001, error number: 0x800CCC0D

  The host 'SMTP' could not be found. Please check that you have entered the server name correctly.
  'Report issue', account: 'POP3', server: 'SMTP', Protocol: SMTP, Port: 25, secure (SSL): no, Socket error: 11001, error number: 0x800CCC0D.
  I'm answering an ad on craigslist and Windows Live continues to appear, but will not send my email I can be reached at * address email is removed from the privacy * or 614-499-1541.
  Thank you
  Stephen lawless

  Your post has nothing to do with Windows Update.

  You're not even close to have properly configured your e-mail account in Windows Live Mail.

  You will find support for Win7 e-mail Clients in this forum: http://social.answers.microsoft.com/Forums/en-US/w7network/threads

  You will find support for Windows Live Mail in this public newsgroup:
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Windows.live.mail.desktop

  Through your News Reader:
  News://msnews.Microsoft.com/Microsoft.public.Windows.live.mail.desktop

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I get an error of Protocol SMTP Port 465 0x800CCC0F on Live Mail using 2 separate Yahoo accounts

  I transferred my two yahoo email accounts in Windows Live Mail. One account works well but the other shows send the above error when I type:

  I get an error of Protocol SMTP Port 465 0x800CCC0F on Live Mail using 2 separate Yahoo accounts

  Hello

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

   

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

• Protocol: SMTP, Port: 25025, secure (SSL): no, Socket error: 10060, error number: 0x800CCC0E

  I can get express to send emails that is my mistake:

  The connection to the server has failed. Account: 'POP3', server: 'mail.punkcarter.com ',.

  Protocol: SMTP, Port: 25025, secure (SSL): no, Socket error: 10060, error number: 0x800CCC0E

  I don't know anything about your PunkCarter mail server, but I don't know any server that requires you to use the port 25025. What happens if you change 2525? It's a number with some servers of viable port.

• I get errors saying found protocols SMTP port 25. I am unable to use Outlook Express but navigation works very well.

  original title: ERROR MESSAGE not FOUND PROTOCOLS SMTP / PORT 25, ETC. don't CAN NOT USE OUTLOOK exp. reg.. INTERNET WORKS FINE

  SOME SELLERS AND MUNICIPAL SITES INSIST YOU USE 'OUTLOOK EXPRESS' THAT MY COMPUTER does not RECOGNIZE no - NO PROBLEMS WITH INTERNET REGULAR, cable INTERNET, etc - ERROR MESSAGE ABREVIATED: "host not found, server pop3 - smtp port 25, @ 11001" Protocol ".

  computer is a HP 64 bit model "pavillion a1600n.
  Should I complain to comcast?
  Gordon Derman
  E-mail address is removed from the privacy *.

  Take a look at this with Comcast links.

  Setting up email in Outlook Express servers:
  http://www.Microsoft.com/Windows/IE/community/columns/mailserver.mspx

• Configure Alerts email for hardware failures

  Our ESXi 5.5 environment goes live today and now it will be in production I was wondering if there was a way to configure alerts email for hardware failures. For example, if a disk goes wrong in our RAID array, I want to be emailed on this subject. Is this possible, and is there a link to find out how to implement that?

  Go to the Administration menu-> vCenter Server Settings-> E-mail and enter SMTP server and the account of the sender.

• iCloud Drive on my mac stops the synchronization of non-standard files

  In my iCloud account, I created two folders (individuals and businesses) in addition to standard folders.  Standards are iMovie, Keynote, Numbers, etc.  On my MacBook Pro (OSX Yosemite V10.10.5), these non-standard files synchronizes any more.

  A solution is to disable iCloud drive, and then restart, but the problem is recurring.  In addition, it is a lot of your time, because whenever I turn it on, it deletes all of my computer and you should download again on restart.

  Is there a solution to this?  Non standard folders are not supported?

  BTW: The iCloud drive on my Windows PC works perfectly...  Hmmm

  Have you tried the signature to iCloud and then reconnect?

• Non-standard window?

  Hello

  Is it possible to have a non-standard window? to be able to shape the top level for a custom shape window.

  The example uses the Windows SDK functions - if you do not have this example then I guess that you do not have the SDK of the CVI version. In this case, the files attached may not be of great use to you.

  JR

• BUG? Digital command resets all other entries with non-standard display format

  I found what I think it's a bug with a digital command on a non-standard display format.  I have the display format '% dW' value (an integer followed by the letter W).  When I enter a number, it works, but if I then pull together the same number, the digital command resets to 0.  This continues to alternate as long as I have to enter the same value - a single entry will be right, the other resets to 0.  LabVIEW 2009 SP1.  The VI didn't even need to run to see this behavior.  If I use a value change event I also see this - the 'New' value will be alternately 0 even if not what I entered.

  

  I had someone contact me about this today.  Just as a follow-up, this CAR has been set in 2011.

• When I try to reply to messages on some websites via Outlook, I get: "no socket error 11001 protocol smtp port 25 google host was not found."

  When I try to reply to messages on some Internet sites via outlook, I get, no socket error 11001 protocol smtp port 25 google host cannot be found.  also when attempt to send from outlook, I get, google found 3 error socket port 110 Protocol pop 0X800CCC0D.i am not very good at such things but can follow directions if they are not complicated to. A few years ago someone set up my computer and I remember their delete something with outlook, because I was going to use google to e mail.but I'm not sure. This problem became a big drawback.

  original title:, not socket error11001 protocol smtp port 25 host not found google, google can't find ox8oocccod

  Hello

  see this link:

  http://www.FixYa.com/support/t2859101-cannot_get_or_send_mail_error