Samsung CLP315 printer

Similar Questions

• Samsung ML2525W printer does not print, the Red toner light stays on. Replace toner, no change.

  My Samsung Laser printer is less than a year.  I rarely use it.  The red light by the symbol of the triangle (cartridge toner according to manual) came and I was no longer able to print.  I have replaced the toner with a new one cartridge, printer and USB for PC connection and turn it back on about two or three times.  No change.  I even opened a 2nd (new) toner cartridge and replaced thinking one of my 2 new ink cartridges could be a dud.  However, still no printing and the red light stays on.  Any suggestions?

  Hello

  I see that you mentioned that the printer is less than a year, so I would recommend that you contact the manufacturer of the printer to help. The issue seems to be with the material.

• Samsung SCX4623FW printer, fax, scanner. It worked fine w / WndowsXP. I have recently upgraded to Windows 7

  I have a Samsung SCX4623FW printer, fax, scanner.  It worked fine w / WndowsXP.  I have recently upgraded to Windows 7 w / wireless to the printer.  Now, printer and fax work very well, but no connection to the scanner.  It constantly displays no message no connection available.  Does anyone else have this problem?  Thank you.

  You must install the full features of your cd of the printer software or the Samsung support pages, according to the instructions of samsung

• Camera Samsung can print directly (USB) to 8500 a but not 8600?

  Hi, I have a few Samsung SH100 with built-in Wifi and for months, we could actually print directly from the camera on our Officejet Pro 8500 has more printer only via wifi.  In cases where we had to move the camera and the printer to a temporary location and had no WiFi, it would rely on the USB cable provided with the camera.  Plug it into the USB port on the front and choosing the option "Connect to the printer" on the device picture allowed me to photo printing directly from the camera (without the offset of wifi 2 minutes).  When I plug it in, it says "PictBridge" and "Device to use PictBridge for direct printing" and then I navigate through the camera to select the photos to print, etc.

  A few months later, I bought the Officejet Pro 8600 Plus think since they are only a single model apart, I would have roughly the same features.  But while the 8600 can connect to the internet and receive e-mail print jobs, when I connect the same USB cable from the camera to the front port of the 8600 I get the following error:

  "Unknown device".

  Disconnection of memory. For more information, see the electronic user guide (also called 'Help') available on your computer after you install the software.

  (I confirmed that I have the latest firmware for the printer and not that it should be relevant for our purposes, the computer to which it is connected via USB (rear port) takes place the most updated software HP).

  Any advice would help, whether it's something we can do to the 8600 or if we scour the internet to buy another opportunity 8500.  Thank you!

  -Jason

  Hi Jason,

  I'm afraid that the 8600 series does not support PicBridge, even if they are similar models there are differences...

  You can find the specifications below, PicBridge is not supported and therefore connect a cammera directly only is not supported:

  http://h10010.www1.HP.com/wwpc/us/en/SM/WF06a/18972-18972-238444-12019-3328086-4322915.html?DNR=1

• Where can I download the driver for Samsung ML1860 printer?

  WHERE CAN I DOWNLOAD THE DRIVER FOR THIS PRINTER

  On Fri, 14 September 2012 13:46:12 + 0000, husband-579 wrote:

  WHERE CAN I DOWNLOAD THE DRIVER FOR THIS PRINTER

  Ouch! Please do not yell at us. We can hear you if you type normally,
  in different cases.

  Drivers for any hardware should be obtained from the web site of the
  hardware - in your case http://www.samsung.com/us/support/ manufacturer
  Depending on which version of Windows you use, the necessary
  driver may or may not be available.
  Ken Blake, Microsoft MVP

• bed spare cartridge Samsung laser printer not compatablefind response

  Samsung laser replacement cartridge printer not reading not compatable solution

  Hello

  1. What version of Windows are you using?
  2. What is the exact error message?
  3. Have you made changes on the computer before this problem?

  I suggest you to contact printer manufacturer, if the problem is specific to the printer.

  Check the status of the issue by connecting different computer.

  You can also refer to:

  Printer in Windows problems.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• Photosmart HP 6520: how to select this format size for printer samsung Galaxy print hp 6520

  How to select this format between Samsung Galaxy 3 score and HP Photosmart 6520 printing size.

  Hello

  If you haven't done so already, please download the Hp ePrint app and print them from the app. You will find options of lots within the app for selection of size and type of paper.

  You must also download the HP Print plugin for android. Once downloaded, go to settings and turn it on.  Once downloaded and activated, you will be given some options of paper size when you select print directly on your android device.

• Samsung CLP300 printer color printing problems

  Samsung CLP-300 color laser printer prints a blue streak on the right side of the page when printing color.  This does not happen in black and white

  A question for Samsung support, or their forums

• Cannot print using Remote Desktop connection

  I have a computer that we will called XP. XP was XP loaded on this subject. It is on a home network with ethernet etc. It has a USB Samsung CLP315 printer attached to it, which we will call SAMSUNG.  XP print SAMSUNG without any problem. SAMSUNG is shared and has the latest drivers.

  Configuration on XP
  Pilot # is 3.04.85:44
  Port: USB001 virtual printer for USB Port
  Sharing installed additional drivers Intel environment Windows 2000 or XP

  Using Remote Desktop connection, I connect to my computer at work, that we will call the WORK that has Windows 7 above and is part of a local network. When you use Word for example on WORK, I should be able to print on SAMSUNG on XP. However SAMSUNG on XP does not present as a printer available. However, I can print from JOB printers shared on the local network or locally connected. Unfortunately, it is of limited use to me because I can not physically get the printed paper, or to know if the printed page correctly until the next day, I get to work.

  I have the Settings Options on the remote desktop connection when I connect XP to WORK remotely. I think that this complies with the info I found on the knowledge base.

  On the general tab, I have the correct name of the computer and user. I have "allow me to save credentials" deselected.

  Local "resources" tab, "materials and resources local printers" and "Clipboard" are selected. Under 'More', 'smart cards' and 'Cards series' are selected. Similarly 'Readers' and 'Supported peripheral Plug - n Play' and their subitems are all selected.

  Tab programs not specified

  If there is other information in the options that may be relevant, please advise and I will detail later.

  Already XP used to via the desktop connection to remotely connect to another computer to WORK which took place of XP. When I'd do things on the WORK and wanted to print with SAMSUNG on XP, SAMSUNG has shown on the list of available printers and would print WORK jobs

  On the local network at the office, WORK is connected and print to a shared printer on a computer showroom (XP) which is identical to the SAMSUNG for model # and driver. So by my way of thinking, the driver is already loaded and functioning.

  Any help would be appreciated.

  Hi JoePuter,

  For more specialized assistance on this issue, please repost your query on TechNet Forum.

  TechNet Forum

  http://social.technet.Microsoft.com/forums/en/w7itpronetworking/threads

  Thanks and greetings

  Karena R

  Microsoft Answers Support Engineer

  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think

• Print not go and causing programs to freeze with Samsung ML-1510 and Lexmark Z1420printers

  Hello

  With the help of a Sony Vaio with Windows 7 Home Premium 64 - Bit.

  When hitting the print option in Open Office (latest version) or Adobe Reader (9.3 I think) or even a doc to wordpad the printer is not the whirlwind in action. The program then goes into mode does not.

  As well the most recent drivers were installed and I tried separately and then reinstalled but still no printing. In both cases, I can see the printers that are online. ATS of Windows don't have any problems. Samsung universal print driver for example shows me the model number and that it is online. The port is USB001. The printer is connected (one at a time) by a USB cable. Two different cables have been tried.

  Both printers work fine with the XP laptop. I hope it's just a matter of box, but cannot locate!

  Thanks for looking, hope you can help me.

  Hi Paul,.

  I would ask allows you to create a system restore manually on your computer, so that in this case, a problem occurs when performing these steps, you can always perform a system restore.

  Method 1

  Make sure print spooler service and the service of dependency for the print spooler service is set to automatic and started.

  To start the print spooler service and set it to automatic, follow these steps.

  1. right click on computer and select Manage

  2. in the console that opens, scroll down the menu Services and applications

  3. click on Services

  4. double-click on the key of spooling print

  5. in the 'Général' tab, go to Startup Type

  6. set the Automatic value.

  7. to enable the print spooler service, click Start.

  8. click on apply, and then restart the computer.

  Once you follow the steps above are trying to print and check if you are able to print.

  Method 2

  Try to do these steps on your computer and check if the printer works on your computer.

  1. Please click on start, then Control Panel.
  2. Open "programs and features".
  3. Click on "turn windows features turn on or off.
  4. Expand "print and Document services.
  5. Enable LPD and LPR options
  6. Disable Internet printing Client.
  7. Restart the computer.
  8. Later, re - install printer drivers and check if you are able to print.

  Method 3

  I suggest you print a test page and check if it prints and post back the result.

  http://Windows.Microsoft.com/en-us/Windows7/print-a-test-page

  I suggest you toopen event viewer and check if there is another error important messages/codes related to the question and after return.

  See the link below for more details:

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Driver for printer Samsung ML2165 does not load the States, it is not compatible on Windows 7

  Original title: program compatibility Application Applications Apps game games Legacy Crash accidents Application Hang hangs

  I am trying to download a driver for a Samsung ML2165 printer but it does not load, he always says they are incompatible, and the port does not recognize the printer, any ideas please.  I use widows 7, on a Lenova 3000 series desktop computer.

  You did that you downloaded the correct driver for the correct architecture (32 or 64-bit) Windows 7, you use?

  My PC running the 32-bit version or 64-bit Windows?

  http://Windows.Microsoft.com/en-us/Windows7/find-out-32-or-64-bit

  In addition, you should try to install the driver first before connecting the printer.

  1. install the driver

  2. restart the computer

  3. connect the printer

• M2070 Samsung scanner now doesn't work with El Capitan 10.11.5

  I have a Samsung M2070 printer laser/scanner and now, the scanner does not work with El Capitan 10.11.5, the scanner Wizard just guard closing during the scan, I uninstalled the drivers and reinstalled but makes no difference. Any ideas?

  Did you also install the drivers for 10.11 or reinstall old drivers?

• Update 7.0.1: unable to print from any Web site now. Corrective action?

  Nothing else in the system has been changed. Previous editions of Firefox perfectly printed on a Samsung laser printer. Now the computer attempts to save the file to print and get a display "unknown error occurred in printing".
  I can get a print from a website if I using Internet Explorer. However, I would like to continue using Firefox as I prefer by far its display and the best speed

  This seems to be a problem with margins in the page layout. Open the file > page setup and set the upper and lower at 0.5 margins (inches or what is appropriate region). I then restarted firefox and presto chango, it works.

• Script printing error

  Original title: print printer print

  I have a Samsung 1600 printer and when trying to print argument or appeal procedure not valid from 1 to Char message Script error line 2432 appears. I'm unable to find the cause of this error. All connections seem to be ok for the printer. The error occurred just recently. There's bee no power or failures that I am aware of that may have caused this.

  Your message was incorrectly displayed in the Feedback forum.  I moved it to the windows 'Hardware and drivers' forum where it is on the subject.  Quote your version of Windows when you post.

  The symptom you describe is a driver problem.  See if this helps: http://support.microsoft.com/kb/2652062

  What has changed on your PC between when it worked and now?

  Visit the website of Samsung and see if they have a driver written for your version of Windows.

• generated incorrectly USPS labels

  I use PayPal to generate my mailing labels and has happened for quite some time.

  If I use FF, labels are about 65% of the appropriate size. If I use IE, they are about 105% of the appropriate size. This is not a printer problem, they are unwelcome.

  I have examples of two labels that show the problem, but no way to attach.

  The problem is the same that I print or Adobe Acrobat or my Samsung laser printer. Everything prints correctly.

  As I gazed at the troubleshooting info this line caught my attention:

            "print.printer_CutePDF_Writer.print_shrink_to_fit": false,
  

  I have not had this program on my computer for a long time. It does not show up in the Services or processes in the Task Manager. A search of my entire hard drive shows that not everything about cutepdf. If I go to devices and printers is not there either.

  Printer program below could be the Quicken PDF printer, otherwise I do not know whence he or the other.

              "print.printer_PrimoPDF.print_margin_right": "0.5",
  

  I didn't ask you you to change for 125% setting in your printer driver settings, but in the last screenshot of how this label is pushed upward in the top margin box makes me wonder if your margin settings are fouled upward. I can't say with certainty, I go through the window of Firefox print preview; my printer is not as sophisticated as yours is, with no preview in the "native print dialog.

  Please look at the dialog box layout Page Firefox and verify that it is set to 100% and shrink to fit is not selected and check the margin settings - in particular the bottom margin.
  
  You can also check this scale setting in the preview window before printing.

  The layout and preview of the menu items are available from the orange Firefox button to print > menu item.