alias of the instrument

Similar Questions

• Add the plugin of the instrument

  Help!  I can't understand how to add a plugin instrument Mainstage.  I have SampleTank3 and the plugin appears in the appropriate folder.  Plugin Manager show the plugin and 'Use' is checked. Everything I read says to click on the slot 'instrument' but I can't find it either.  Any help would be appreciated.

  B

  In the instrument Channel Strip, click on the right side of the box (on the up/down arrows). The list is displayed. Choose your instrument to THE.

  

• What happened to the instruments Orchestra that I paid money?

  In previous editions of GarageBand, Apple sold a lot of orchestral instruments. but the last updated them stripped. How to make a comeback?

  If you bought the Jam Pack Symphony Orchestra, use the old installer DVD to reinstall them.  The metaoutil are not part of GarageBAnd and is not installed by GarageBand.

  but the last updated them stripped. How to make a comeback?

  The upgrade to GarageBand 10 let the metaoutil installed, if you do not uninstall them. Did you clean your drive and do a clean install?  If you have just installed the new GarageBand 10 in addition to your previous GarageBand 11, all your instruments of JamPack should still be there.  They will show in the legacy of the library of the Instrument section, if you select a software instrument track.

  

  If uninstall you GarageBand 11 and can't find your old Jam Pack installation media, or the installation gives DVD an error that PowerPC programs are not supported, you can try to restore the missing instruments from the last backup you did your Mac before the upgrade.

• How do I cancel remove the instrument to find my iphone?

  How do I cancel remove the instrument to find my iphone? I remove but forget to erase. my phone has been lost... I want to erase the data. How can I do

  Can you be more specific? What you mean

• Start-up mute an Instrument track without inhibition of the instrument.

  Hi all

  When you cut a logical Instrument x track, you can play is no longer the instrument with the midi keyboard. It's frustrating. In Logic 9, even if you cut the track, the unit would still be playable, allowing you to go back and try another option for the same passage of music. I want to be able to do this without having to cut areas. If there is a lot of regions in this passage to find what areas have been muted / disabled can quickly become messy. It is much easier to simply cut the track and play something on the same passage and see if it works as an idea. But logical X is more you can do that...

  Any ideas guys... Duplicate the track isn't as an elegant solution.

  Areas of inhibition is the only option, and it was the same LP 9: inhibition of the track to you he could no longer play. I don't know where you got the idea that you could.

  I'll try in LP 9 (which I still installed it), just to be sure what I just said.

  ...

  Yes. Muted tracks cannot be read in LP 9 is.

• Suggestion regarding mitigation of the probe in the instrument Tektronix 7000 Series Driver

  
  

  Hello Brian,.

  In the Readme of the instrument under problems driver known:

  To report any questions or comments about this instrument driver, please send an email to [email protected].

  As this is a pilot certified NOR supported it but only R & D can change it.

  Kind regards

  Mart G.

• VI do not transfer data from the instrument.

  Hello to all who are interested.  I'm working on an instrument driver for an Agilent D3000A generator of signal (E4432A) trying to get the generator to sweep the amplitude of - 30dBm to-75dBm and then come back in a loop.  The loop is in a structure of the event and is called by a switch on the front panel.  When the switch is selected event triggers and loop information is passed to the VI.  The problem is the 'Sweeping Steps' VI does not use data from the number of points in the sweep and pause at each time and the tracks of the loop as the amplitude is just switching between the min and Max amplitude levels.  But once I have stop the generator program will continue sweeping (only in a sense) but the correct time and the number of points.  When I use the spy "measurement and Automation Explorer" program AND I do not see that the data are transferred in the instrument.  I don't know if the Subvi the execution order is correct and was amazing if someone could take a look and let me know if I have them in one order incorrectly.  Could not find an example of this type of program examples of the driver so there is little help.  I joined the program and the driver of instruments for your comment, then please take a look and send any information you think will help me to get this working properly.  I have also tried to run the single sweep mode sweep and have just the change of direction for the sweep to the other side of the ramp, but I still get the same results.

  The generator has 15th and ONU3 options.

  I, m using LabVIEW 2010 on a Dell Dimension 2400 running Windows XP and service pack Version 5.1.2600 Service Pack 3 Build 2600.
  Please let me know if you need other information.

  Thank you

  Just for the short term, right click on the structure of the event, select Configure the events managed by this case and uncheck the lock front panel.  Also, I don't know if you caught my edit.  I think your problem is your expectation (or lack of).  At your expectations to be slightly more than the number of steps to multiply by the pause time.  You must leave the instrument perform its scanning after all.

• Address VISA of the instrument cannot be updated

  I have used labview 8.6 in Winxp to instruments of control such as keithley 2400, 2602, SR830 to take the measurement. Recently, this computer affected by virus, then we have reinstalled the system, changed the Win7 system. We can find the instrument in MAX and can also communicate with the instrument. But we have not managed to master the instrument in Labview 8.6. It seemed that the insrument is not found in Labview. After that we have installed the 5.1 Ni-VISA, the problem is still there. Can someone tell me how to do?

  Thank you

  Hello

  http://digital.NI.com/public.nsf/allkb/B972242574D4BB99862575A7007520CB

  LabVIEW 8.6 is not listed as compatible with Windows 7.

  You will probably need to upgrade to a LabVIEW which is compatible

• Cannot detect the instrument (TDS 210)

  Hello, I have difficulty to connect PC tektronix TDS 210. I use GPIB USB HS, operating system is windows 7, NOR-488-3. The problem is after I installed everything needed for this configuration, using the measurement and automation, I can't detect Tektronix TDS 210. Is it something related to software or oscilloscope itself, because GPIB USB HS works fine with any other instrument, except this one.

  I managed to find the manual for the communication module: http://www.sfu.ca/~jiel/courses/327/bin/TDS200-Extension_Modules.pdf

  If you go to the GPIB section, you will see that you need to go to tools-> Options-> GPIB Setup on the scope.  Under this menu is a Bus connection.  It must be on talk-listen so that you will be able to talk to the instrument.

• I send a ' * IDN?' command of the instrument. and he says...

  Hello. I am student in physics at the University of Seoul.

  I want to use the power of 224 Keithley with Labview Source.

  I send a ' * IDN? "command to Keithley224, then I get the strange message." CO-HOST + 0.0000E + 0, V + W + 5.0000E + 0 3.0000E - 2'

  I think, this is the initial value of the instrument. (Source, V-limit, dwell times)

  What is the problem with this machine? (I have attached a screenshot).

  I would like to address with the LabVIEW (v2011) for the Keithley224 program.

  I try to use the driver provided by Keithley, but Keithley224 does not recognize the command.

  I here enclose the vi file provided by the newspaper Keithley and Trace of e/s OR.

  Please, help me.

  Thank you very much.

  You should have stuck with your original thread.

  Where in the manual do you see him * IDN? query? You can not just do orders to send.

  You really need to provide details of your problem with the driver.

• I want to convert a former pilot of the instrument written for LV51.

  I found that LV 2009 will not open an existing instrument driver Fowler wrote in LV5.1.  I want to see the patterns of principle to a new driver to use with a FV Fowler MarkV Ultra indicator of figures who use their OPTO-RS cable.  The cable uses rs232 to communicate with a pc.

  I sent the instrument driver to [email protected].  Thanks for commenting.

• Rearmament and automatic test of a controller (not the instruments attached to it!) GPIB card

  We have a Council NI GPIB in an operation of great trial.  Because reliability is absolutely crucial, I want to be able to force a reset of the GPIB controller card, but also run a set of diagnostic self-test on the Board of Directors.  Note!  I does not reset the instruments attached to the GPIB bus.  I want to be able to reset the card controller itself and run automated tests on it.

  I studied literature, but all I find are commands to reset instruments attached to the Commission.

  Is there a test suit for the GPIB card and a way to reset?

  -Carl Dreher

  
  

• How do I know the address of the Instrument connected to my pc?

  How do I know the address of the Instrument connected to my pc?

  Thank you

  Véronique.

  
  

• Information required to communicate with the instrument of the IEEE-488 Interface.

  Dear all,

  I have an instrument that has interface CEI-488. I would like to connect to my laptop using the GPIB-USB connector of NOR.

  In order to communicate with the data of this device and the manual, I have a licensed version of LABVIEW. But when I made contact with seller OR I learned the connector would cost me Rs. 40000 /-including software as described in the web.

  Is question 1 - necessary to buy the software with connector? or can I manage to read through LABVIEW?

  Question 2 - I read the manual of the instrument and it can be programmed using the interface IEEE 488.2 measure of LABVIEW and automation Explorer can do this by using the existing LABVIEW.

  Looking forward for a response.

  Kind regards

  Srini

  Hello

  If you have any material of LabVIEW and NI GPIB software VISA is free.

  What instrument (model and seller) you are trying to contact?

• I disconnected cable PCI-GPIB (desktop disabled) to move the equipment, once reconnected and restarted Desktop, I can't connect to the instruments more (OS Windows XP)

  Hi people,

  I hope someone can help me with this problem. I am running a Windows XP operating system where I have recently been using a NI PCI-GPIB to connect to instruments. The other day, I had to turn off the desktop computer to disconnect the GPIB cable to move the material furniture - I do not remember if I had turned off equipment that were connected via GPIB cable before removing the GPIB cable from the desktop.

  Although I came to notice that he was in loose in the socket connection that it can be disconnected from the never removed the GPIB card slot. Now with etc-reconnected GPIB cable is unconnected with the instruments via the software I use--I don't see the equipment listed on MAX either. I had NEITHER-488. 2 installed v2.8 and following this issue and various changes to try to solve it (for example, move to another location, System Restore to previous restore point I knew the connection work etc.). I upgraded to 2.8.1 V and still the same issue.

  In Device Manager, there is a pilot 'unknown device' I have tried to update and no will - I even tried him assigning driver for the NI PCI-GPIB card that seemed to have worked but still no will.

  Appreciate your help on this.

  Chris

  have you checked that the GPIB card is secure in its niche in the PC?